jim...@earthlink.net said:
> I'm kind of curious about their "UI".. hold CapsLock? how does this device
> manifest itself to the host computer? I saw a mention of HID, so it is
> emulating a keyboard?
I have a couple of the non-Gold versions. Plastic with a push button. They
have one
Yo jimlux!
On Thu, 5 Jan 2017 12:21:44 -0800
jimlux wrote:
> I'm kind of curious about their "UI".. hold CapsLock? how does this
> device manifest itself to the host computer? I saw a mention of HID,
> so it is emulating a keyboard?
I received serveral off list
Yo jimlux!
On Thu, 5 Jan 2017 12:21:44 -0800
jimlux wrote:
> > http://www.pcsensor.com/usb-hygrometer/temperhum.html
>
> I'm kind of curious about their "UI".. hold CapsLock? how does this
> device manifest itself to the host computer? I saw a mention of HID,
> so it
On 1/5/17 11:15 AM, Gary E. Miller wrote:
Yo All!
I am surprised that the TEMPer and TEMPerHUM have not been mentioned
yet. They are cheap reliable USB temperature sensors. The TEMPerHUM
adds a humidity sensor.
I have several TEMPer's running to log room temp around NTP servers.
The basic
Yo All!
I am surprised that the TEMPer and TEMPerHUM have not been mentioned
yet. They are cheap reliable USB temperature sensors. The TEMPerHUM
adds a humidity sensor.
I have several TEMPer's running to log room temp around NTP servers.
The basic TEMPer reads to 0.1°F is only $9:
Right on the page at adafruit there is a downloads link. This gets you to
software read data from the board. It uses SPI
Use one of those $3 arduino nanos to talk spi to the sensor and USB to a
computer. The linked software does that
> On Jan 4, 2017, at 11:32 AM, Dan Kemppainen
ylor" <david-tay...@blueyonder.co.uk>
>> To: "Discussion of precise time and frequency measurement"
>> <time-nuts@febo.com>
>> Subject: Re: [time-nuts] Temperature (environmental) sensors
>> Message-ID: <076CCA551DC142C2A8D93CF02A
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Subject: Re: [time-nuts] Temperature (environmental) sensors
Message-ID: <076CCA551DC142C2A8D93CF02A4AD1A3@Alta>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply
I like the Bosch BME280 conneced to a Raspberry PI.
https://learn.adafruit.com/adafruit-bme280-humidity-barometric-pressure-temperature-sensor-breakout/pinouts
https://github.com/adafruit/Adafruit_Python_BME280/blob/master/README.md
-- Björn
Some performance plots are
From: Bob Camp <kb...@n1k.org> Date:
03/01/2017 19:36 (GMT+01:00) To: Discussion of precise time and frequency
measurement <time-nuts@febo.com> Subject: Re: [time-nuts] Temperature
(environmental) sensors
Hi
There’s always the “cool factor” of higher resolution. App
PT105 4 channel PRD
interfaces.
Robert G8RPI.
From: jimlux <jim...@earthlink.net>
To: time-nuts@febo.com
Sent: Tuesday, 3 January 2017, 15:22
Subject: Re: [time-nuts] Temperature (environmental) sensors
On 1/3/17 7:08 AM, Tom Van Baak wrote:
> I have some high-end te
Hi Tom:
I've used the Onset data loggers and they are very inexpensive and work well.
As a plus they are PIC based so hackable.
Don't know about accuracy, resolution
http://www.onsetcomp.com/products/data-loggers
http://www.prc68.com/I/Hobo.html
http://www.prc68.com/I/GPend.shtml
The
Yesterday hackaday had a link to a humidy sensor comparison:
http://www.kandrsmith.org/RJS/Misc/Hygrometers/calib_many.html
Em 03/01/2017 16:03, Mark Sims escreveu:
I did a LOT of testing environmental sensors when I built my ultrasonic
anemometer weather station that is part of a rocket
The sensor Jim linked :
Temp/humidity with I2C interface
https://www.adafruit.com/products/1293
looks good - packaged, high res temperature, etc. It's not 'complete' in
that it's only a sensor, but you only have to attach a USB-I2C adapter.
Probably less work than connecting up the sparkfun
Hi
There’s always the “cool factor” of higher resolution. Apparently it’s not
enough
of a issue to make it a worthwhile market to serve.
Based on what has been tossed around, it sounds like an Arduino with some
bits plugged in is the low cost leader. 3D print up and enclosure and you have
The good news is if the dataloger you get has a mems pressure sensor, you
will have a high precision temperature sensor, whether or not the product
software provides that resolution to you is another matter. In addition to
the piezo-resistive bridge being mechanically sensitive to diaphragm
I did a LOT of testing environmental sensors when I built my ultrasonic
anemometer weather station that is part of a rocket launch control system. The
best humidity sensor I found was the DHT21/SHT11/AM2301/SHT15. They run around
$3 and can also provide temperature to 0.1C res / 0.5C
On 1/3/17 9:15 AM, Bob Camp wrote:
Hi
There is an ever increasing pool of good sensors to put into something like
this.
(More so for temperature and pressure. Humidity still is a bit of an issue.)
There’s not a lot to interface between the sensor and a USB “chip”. It’s
surprising
that there
Hi
There is an ever increasing pool of good sensors to put into something like
this.
(More so for temperature and pressure. Humidity still is a bit of an issue.)
There’s not a lot to interface between the sensor and a USB “chip”. It’s
surprising
that there aren’t more cheap / high accuracy
These
https://www.adafruit.com/products/381
are .0625C resolution, 1-wire interface (temp only)
This one
https://www.adafruit.com/products/642
has Teflon insulation, for use at higher temps
Or this one, Temp/humidity with I2C interface
https://www.adafruit.com/products/1293
On Tue, Jan 3, 2017
All these (including the one I linked) seem to be 0.5C only.
This one gets to 0.2C : http://www.ti.com/tool/hdc1010evm
On Tue, Jan 3, 2017 at 4:09 PM, Paul Alfille wrote:
> If you don't mind using 1-wire sensors, there are many nice choices, like:
>
>
If you don't mind using 1-wire sensors, there are many nice choices, like:
http://www.embeddeddatasystems.com/Environmental-Sensors_c_44.html for
temperature/humidity/barometric pressure...
On Tue, Jan 3, 2017 at 10:22 AM, jimlux wrote:
> On 1/3/17 7:08 AM, Tom Van Baak
On 1/3/17 7:08 AM, Tom Van Baak wrote:
I have some high-end temperature and pressure instruments. But for casual use
in my home and mobile timing lab I use Sparkfun Weather Stations. The old URL
is:
https://www.sparkfun.com/products/retired/10586
Replaced by
I haven't used this current generation of loggers (I do have a couple of
older RS232 units) but there's quite a range at
https://www.lascarelectronics.com/markets/environmental/
On Tue, Jan 3, 2017 at 3:08 PM, Tom Van Baak wrote:
> I have some high-end temperature and
I have some high-end temperature and pressure instruments. But for casual use
in my home and mobile timing lab I use Sparkfun Weather Stations. The old URL
is:
https://www.sparkfun.com/products/retired/10586
It's USB, talk-only, one reading a second, temperature, pressure, humidity --
25 matches
Mail list logo