Hi Chris,
On 07/14/2013 05:50 PM, Chris Albertson wrote:
If you are after the cheapest and smallest spectrum analyzer possible look
for a TV tuning USB dongle. Some of these tune over the range of 64-1700
MHz There is software to do FFT and plot spectrums You can set started
plotting in the
I have a 58503 that occasionally is not able to track satellites.
Usually I wait until the holdover expires but then the only fix seems
to restart the 58503 (SYST:PRESET) better than power cycle. It seems
there is a command to reset only the GPS receiver but it is not in the
58503 manual.
On Tue,
Azelio, There is a pForth command init_gps
Or syst:pon does a warm boot.
Syst:pres defaults all settings!
For the first time, I waited around and eventually, the phase lock was restored.
Actually, since it went through this process the GPS RX is behaving itself
better than ever.
Perhaps it
Bobble ?
On Jul 15, 2013 6:09 PM, Tim Shoppa tsho...@gmail.com wrote:
Unless your frequency counter has some anti-bobble tricks, you will always
see +/-1 bobble in the last digit. Of course with longer gates, this last
+/-1 becomes a smaller fraction of total count.
I personally do not trust
Hi
The schematic and explanation on that page pretty well show how the P2/8
shutdown pin from the CPU works on the outer oven in the Z3801.
Bob
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Ed Palmer
Sent: Tuesday, July 16, 2013
You can find a super-simple oven controller here:
http://www.romanblack.com/xoven.htm
On Tue, Jul 16, 2013 at 6:45 PM, Bob Camp li...@rtty.us wrote:
Hi
The schematic and explanation on that page pretty well show how the P2/8
shutdown pin from the CPU works on the outer oven in the Z3801.
I see an FE-2266A oscillator (120Mhz) on eBay.
Does anyone know what it was used in.
Just wanted to see if the pinout and power supply rating could be
determined.
I'm looking for a 60Mhz or 120 Mhz OCXO preferably with EFC
Thanks,
Corby
___
