Hi The schematic and explanation on that page pretty well show how the P2/8 shutdown pin from the CPU works on the outer oven in the Z3801.
Bob -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Ed Palmer Sent: Tuesday, July 16, 2013 1:09 AM To: time-nuts@febo.com Subject: Re: [time-nuts] 10811 outer oven controller. The schematic has been around for some time. Although it's not the original site (which I believe is now gone), Didier has reposted the info at: http://www.ko4bb.com/Manuals/05%29_GPS_Timing/Z3801/Z3801A_Outer_Oven/Web_Pa ge/Z3801A%20Outer%20Oven%20Controller.htm If necessary, be sure to remove any carriage returns or linefeeds in the URL. Ed On 7/15/2013 7:56 PM, Robert Darby wrote: > Is anyone aware of a schematic for the oscillator on the web? I have > downloaded the usual 10811 manuals but I've never seen a schematic or > description of the pin-outs for the double-oven version. > > Bob Darby > > On 7/12/2013 11:38 AM, Azelio Boriani wrote: >> Is it enough if I have a schematic to send? But first let me find it... >> >> On Fri, Jul 12, 2013 at 5:13 PM, Mark C. Stephens >> <ma...@non-stop.com.au> wrote: >>> I have a spare 10811 double oven, is there a homebrew outer oven >>> controller floating around? >>> >>> >>> -Marki _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.