Re: [time-nuts] Slightly OT: interest in a four-output, ultra-low jitter, synthesizer block?

I used to do SMTIf the solder paste does not absorb moisture when stored it should be OK People have had success with an iron frying pan on the stove . I have used a hot air paint stripper gun with a metal funnel to re flow the paste. There cheap SMT re work stations on Alibaba now <$100

Re: [time-nuts] current crop of GPS receivers for Rpi/Beaglebone for NTP server/etc

I used https://store.uputronics.com/index.php?route=product/product=60_64_id=81 and I'm happy with it. Good instructions. On Mon, Oct 16, 2017 at 2:46 PM, Hal Murray wrote: > I don't know of any no-wire setups for the Beaglebone. (I somewhat > remember > one, but it

Re: [time-nuts] RG6 or LMR400 for GPS Antenna (Symmetricom 58532A and T-bolt)

BODY { font-family:Arial, Helvetica, sans-serif;font-size:12px; } For long distance you need the right cable. Since the Antenna is likely designed for 50 ohms use 50 ohm cable If it's a fixed installation maybe RG8 with pl259 to N adaptor would be a good bet ? This garden