I used https://store.uputronics.com/index.php?route=product/product&path=60_64&product_id=81 and I'm happy with it. Good instructions.
On Mon, Oct 16, 2017 at 2:46 PM, Hal Murray <hmur...@megapathdsl.net> wrote: > I don't know of any no-wire setups for the Beaglebone. (I somewhat > remember > one, but it included something else I didn't need and the price was high > enough that I ignored it.) > > If anybody finds one, please let us know. > > > There are at least 3 GPS HATs for Pis. > > The first two include a patch antenna. Depending on your location, you may > be able to run without an external antenna. The Adafruit has a tiny u.FL > connector rather than a SMA so it fits into a normal enclosure with no > modifications. > > Adafruit: > https://learn.adafruit.com/adafruit-ultimate-gps-hat-for-raspberry-pi > You need to solder on the 40 pin header. > > SKU 424254: > http://www.dx.com/p/add-on-gps-module-gps-hat-module-for- > raspberry-pi-2-mod > el-b-b-424254 > (I haven't tried one.) > > > Uptronics: > https://store.uputronics.com/index.php?route=product/ > product&path=60_64&prod > uct_id=81 > > See Davit Taylor's msg for the US source. > > The old(er) Uptronics board had the antenna connector going out the end > rather than the side. That doesn't fit with new Pis that have 4 USB slots. > On older Pis, it puts the cable in the slot between 2 connectors. You can > use old enclosures by just breaking off one tab. > > --------- > > Lots of info here: > https://www.ntpsec.org/white-papers/stratum-1-microserver-howto/ > You may have to dig to find the stuff you are interested in. > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.