I haven't checked the pps either. But the reason to put the 15 Mhz into
standby is that they combine both signals in a resistive combiner and
distribute the signals to multiple radios.
If two were active it would create issues. This method avoids the gap
switch of a relay.
Regards
Paul
WB8TSL
On
Hi
The cell phone base only needs one reference to keep it running. They disable
the un-needed output to make it clear which one should be used. It’s a very
common thing in modern systems, not just telecom setups.
Bob
On Dec 13, 2014, at 11:55 PM, Hal Murray hmur...@megapathdsl.net wrote:
On Sat, Dec 13, 2014 at 11:55 PM, Hal Murray hmur...@megapathdsl.net
wrote:
Can somebody confirm that the PPS and 15 MHz on the standby unit are
disabled?
Yes, the PPS is held active.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe,
Can somebody confirm that the PPS and 15 MHz on the standby unit are disabled?
Does anybody understand how/why they do things that way? Is that a typical
Telco interface?
If anybody is poking around inside and find a simple way to turn them back
on, please share.
The PPS is 400
I haven't checked the PPS yet, but the 15 MHz from the standby unit is
off on my setup.
Joe Gray
W5JG
On Sat, Dec 13, 2014 at 9:55 PM, Hal Murray hmur...@megapathdsl.net wrote:
Can somebody confirm that the PPS and 15 MHz on the standby unit are disabled?
Does anybody understand how/why they
