I haven't checked the pps either. But the reason to put the 15 Mhz into standby is that they combine both signals in a resistive combiner and distribute the signals to multiple radios. If two were active it would create issues. This method avoids the gap switch of a relay. Regards Paul WB8TSL
On Sun, Dec 14, 2014 at 12:23 AM, Joseph Gray <[email protected]> wrote: > > I haven't checked the PPS yet, but the 15 MHz from the standby unit is > off on my setup. > > Joe Gray > W5JG > > > On Sat, Dec 13, 2014 at 9:55 PM, Hal Murray <[email protected]> > wrote: > > Can somebody confirm that the PPS and 15 MHz on the standby unit are > disabled? > > > > Does anybody understand how/why they do things that way? Is that a > typical > > Telco interface? > > > > > > If anybody is poking around inside and find a simple way to turn them > back > > on, please share. > > > > > > The PPS is 400 microseconds wide. > > > > > > -- > > These are my opinions. I hate spam. > > > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
