: Re: [time-nuts] Z3812 Diag port data? RE: time-nuts Digest, Vol 124,
Issue 26
Hi
I ??ve been trying to get ahold of some / any of the sources for these
programs. Several of them need to be re-compiled (and possibly re-written) for
the modern world of 64 bits and Net (what ever it ??s up to
If they are straight wired pin 1 to pin 1, pin 2 to pin 2, etc, they will
not work.
- Original Message -
From: "Don Latham"
To: "Discussion of precise time and frequency measurement"
Sent: Tuesday, November 04, 2014 1:23 AM
Subject: Re: [time-nuts] Z3812 Diag
Bob and all: Haven't hookedd upmy units yet. Marlon P Jones (MPJA) has some
Real Cheap 15 pin m-m cables that are 1 ft long, might be useful. no clipped
pins, whatever they're for. I don't think many of us want to hot-plug that
cable?
Don
Bob Camp
>
> My boxes were flakey at first. What I finally
Hi
I’ve been trying to get ahold of some / any of the sources for these programs.
Several of them need to be re-compiled (and possibly re-written) for the modern
world of 64 bits and Net (what ever it’s up to).(the rev coming out tomorrow).
The whole structure of accessing com ports changed a
Just loaded Satstat and found that it would not work with windoze 7 64 bit. Is
there a 64 bit version around or do I dig out an old xp machine - or what
program has been found to work?
Bill, WA2DVU
Cape May
---
This email is free from viruses and malware because avast! Antivirus protection
> Sent: Monday, November 3, 2014 6:17 AM
> Subject: Re: [time-nuts] Z3812 Diag port data? RE: time-nuts Digest, Vol 124,
> Issue 26
>
> Hi
>
> Ok, on the slave you have, are you talking to the Diag (HP) port or to the
> RS-422 / PPS (Lucent) port?
>
> Bob
>
> Subject: Re: [time-nuts] Z3812 Diag port data? RE: time-nuts Digest, Vol 124,
> Issue 26
>
> HI
>
> So at least there is one way communications from the GPS box to the slave
> box.
>
> Bidirectional com would be a bit complex given the lack of UART’s on the
normal behavior till someone, you perhaps, posted that
> that was not correct. So, I've emailed Aecis to request a replacement REF-1.
> Bob From: Bob Camp
> To: Discussion of precise time and frequency measurement
> Sent: Sunday, November 2, 2014 8:20 PM
> Subject: Re: [
till someone, you perhaps, posted
that that was not correct. So, I've emailed Aecis to request a replacement
REF-1.
Bob From: Bob Camp
To: Discussion of precise time and frequency measurement
Sent: Sunday, November 2, 2014 8:20 PM
Subject: Re: [time-nuts] Z3812 Diag port data? RE: t
that was not correct. So, I've emailed Aecis to request a replacement REF-1.
> Bob From: Bob Camp
> To: Discussion of precise time and frequency measurement
> Sent: Sunday, November 2, 2014 8:20 PM
> Subject: Re: [time-nuts] Z3812 Diag port data? RE: time-nuts Digest, Vol 124
time and frequency measurement
Sent: Sunday, November 2, 2014 8:20 PM
Subject: Re: [time-nuts] Z3812 Diag port data? RE: time-nuts Digest, Vol 124,
Issue 26
HI
So at least there is one way communications from the GPS box to the slave box.
Bidirectional com would be a bit complex give
HI
So at least there is one way communications from the GPS box to the slave box.
Bidirectional com would be a bit complex given the lack of UART’s on the pc
board. I’d bet it just runs through a standard set of messages on the GPS and
watches the results. The way to quickly prove I’m wrong wo
Yes the diagnostic port on the slave unit diaplay's gps data just like
the Z3811. Therefore there must be serial data being exchanged on the 15
pin interconnect.
Mike
N2LYM
Message: 5
Date: Sun, 2 Nov 2014 15:58:20 -0500
From: gandal...@aol.com
To: time-nuts@febo.com
Subject: Re: [time-n
13 matches
Mail list logo