again.
I haven't found cal in the words on a Z3815A but is present on the Z380x
series.
-marki
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Magnus Danielson
Sent: Thursday, 20 June 2013 6:45 AM
To: time-nuts@febo.com
Subject:
; series.
>
>
> -marki
>
>
> -Original Message-
> From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
> Behalf Of Magnus Danielson
> Sent: Thursday, 20 June 2013 6:45 AM
> To: time-nuts@febo.com
> Subject: Re: [time-nuts] Z38XX PFORTH inte
-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Magnus Danielson
Sent: Thursday, 20 June 2013 6:45 AM
To: time-nuts@febo.com
Subject: Re: [time-nuts] Z38XX PFORTH interpreter question
Hi Murray,
On 06/18/2013 04:10 AM, Murray Greenman wrote:
> Hi,
>
Hi Murray,
On 06/18/2013 04:10 AM, Murray Greenman wrote:
Hi,
Has anyone made further progress in understanding the PFORTH commands?
I have figured out roughly what most of them do, but then again it is
fairly obvious from their name.
cal performs tempco calibration and you should put the l
You might find there are either hard links on the board or different firmware?
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Murray Greenman
Sent: Tuesday, 18 June 2013 12:10 PM
To: time-nuts@febo.com
Subject: [time-nuts] Z38XX
Hi,
Has anyone made further progress in understanding the PFORTH commands?
I find with my Z3815A (with an E1938A hockey puck oscillator installed) that
the command 'puck' returns:
a= -6.305066e-13 b= 0.00e00 a/d = 1.60e+01
puck communication is alive
puck warm= 1
puck EFC ADC err= 0
stat