Also note that Heather can only get/update the FC value (usually( every two
seconds. Occasionally, due to vagaries in the PRS-10 response timing, you
can see two consecutive values in the log that are not the same.
> 2) Have any of you ever logged the FC values while at the same time taken
Hi,
On 08/11/2018 05:32 PM, Tom Van Baak wrote:
>> Should the multiplier value be +1.0e-09 or +1.0e-10?
>
> I worked with Chris off-list on this one. It turns out he was measuring his
> new PRS10 and trying to match his ADEV plots against the published plots from
> SRS.
ng a OCXO. [2].
Thanks,
/tvb
[1] https://www.thinksrs.com/downloads/pdfs/manuals/PRS10m.pdf
[2] http://www.leapsecond.com/pages/gpsdo/
- Original Message -
From: "Chris Burford"
To:
Sent: Wednesday, August 08, 2018 7:10 AM
Subject: [time-nuts] Stable32 Input (Multiplier)
&
Hi,
On 08/08/2018 04:10 PM, Chris Burford wrote:
> I'm using Lady Heather to write data from an RFS. In looking at the data file
> it appears the values are written as ppb. My question is how to best
> accommodate this with the correct Stable32 multiplier value. Should the
> multiplier value
