Hi Gerhard.
If possible I would download the source files.
Thank you very much for sharing your work.
Best regards.
73 from Claude VA2 HDD
___
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an
email to
ds, for less money than having
> to go through a 3rd party, and avoiding USPO costs and delays.
>
> Cheers,
> DaveM
>
>
>
>
>
>
>
> From: "Andrew Kalman"
> To: "Discussion of precise time and frequency measurement" <
> time-nuts@li
, for less money than having to go
through a 3rd party, and avoiding USPO costs and delays.
Cheers,
DaveM
From: "Andrew Kalman"
To: "Discussion of precise time and frequency measurement"
Sent: Thursday, November 25, 2021 12:34:41 PM
Subject: [time-nuts] Re: 1 pps / G
I have boards built regularly at JLCPCB, I could certainly order a batch
delivered to me, but I would have to send them all to someone else, to deal
with distributing them out to folks on the list (I am time-constrained).
___
Andrew E. Kalman, Ph.D.
On 11/24/2021 1:06 PM, Gerhard Hoffmann wrote:
Hi,
it took some time to make the Gerbers,
It is much appreciated Gerhard, all the work you have done to make these
available to the group. Many thanks!
Now, the inevitable query; is anyone planning on ordering some of these
boards, and is
On Thu, 2021-11-11 at 14:07 +, Andy Talbot wrote:
> I made a 5MHz doubler plus distribution for my HP5061. You can see
> the
> design at http://g4jnt.com/10MHzDist.pdf The doubler is a full wave
It's worth noting that the HP5370A has a doubler on the reference
input. It will accept either 5
From: "Gerhard Hoffmann"
To: time-nuts@lists.febo.com
Sent: Wednesday, November 10, 2021 6:52:56 PM
Subject: [time-nuts] Re: 1 pps
Am 10.11.21 um 23:56 schrieb B Riches via time-nuts:
> Any ideas on how to get a useable 1 pps output sig out of a Lucent KS-24361
> to use
You seem to have gone to extraordinary lengths to trap out each unwanted
product, yet the final spectrum shows only -50dBc products. That seems a
poor return for that effort in filter design.
I made a 5MHz doubler plus distribution for my HP5061. You can see the
design at
Thank you Gerhard. Great project!
Bill, WA2DVU
73,
On Wednesday, November 10, 2021, 07:53:20 PM EST, Gerhard Hoffmann
wrote:
Am 10.11.21 um 23:56 schrieb B Riches via time-nuts:
> Any ideas on how to get a useable 1 pps output sig out of a Lucent KS-24361
> to use with SL sampling
Am 10.11.21 um 23:56 schrieb B Riches via time-nuts:
Any ideas on how to get a useable 1 pps output sig out of a Lucent KS-24361 to
use with SL sampling rate detector.
I am using the 1 pps output from a Jackson unit but would like to use the
Lucent if I can since that is my gps standard.
73
> Any ideas on how to get a useable 1 pps output sig out of a Lucent KS-24361
> to use with SL sampling rate detector.
It's on a differential pair on at least one of the serial ports.
I don't have the pinout handy. It can't be hard to find if you have a scope
handy.
--
These are my
On 8/28/21 10:25 AM, Robert DiRosario wrote:
For GPS receivers that give 1 PPS output the spacing between pulses
is, obviously, very accurate.
Are the pulses synchronized to something, like UTC seconds, or does it
vary from one
manufacturer to another, or even one unit to another?
GPS
12 matches
Mail list logo