Depends on who you got it from
Sent from Samsung tabletNick Sayer via time-nuts
wrote:When I got it, the setting was zero. That suggests to me that the factory
tuning was erased, assuming that the factory tunes it the same way - by
changing the value adjusted by that software.
> On Sep 21,
Know all that that is why we decided not to do it. Not knowing all the ins and
outs and limits of the Tbolts that is why I asked the question to begin with
Bert Kehren
Sent from Samsung tabletCharles Steinmetz wrote:Bert
wrote:
> On our to do list was temperature control and clean up loop.
The cheapest is not a 5T there are many 6 and 7 for $ 10. T gives you nothing
unless you have saw tooth correctionBerrt Kehren
Sent from my Galaxy Tab® A
Original message From: Paride Legovini via time-nuts
Date: 1/23/18 12:24 PM (GMT-05:00) To:
time-nuts@febo.com Subject:
Do not toss, first check output of OCXO if good keep if you do not fiend the
problem. If no output replace. If L H shows that it works bring OCXO output
directly.Bert Kehren
Sent from my Galaxy Tab® A
Original message From: Richard Solomon
Date: 1/26/18 1:39 PM (GMT-05:00)
Please keep us informed I bought onBert Kehren
Sent from my Galaxy Tab® A
Original message From: John Green Date:
2/6/18 4:03 PM (GMT-05:00) To: time-nuts@febo.com Subject: Re: [time-nuts]
eBay GPS antenna.
I kind of have to believe the specs. The two survey grade antennas
Do not know but it is the holy grail of AV nuts short of a Maser or 8607Bert
Kehren
Sent from my Galaxy Tab® A
Original message From: Pete Lancashire
Date: 2/22/18 9:44 AM (GMT-05:00) To: Discussion of
precise time and frequency measurement Subject:
[time-nuts] Curious,
Some of you are to young to remember when Javanese products were considered
junk same storyBert Kehren
Sent from my Galaxy Tab® A
Original message From: "Van Horn, David"
Date: 2/22/18 4:44 PM (GMT-05:00) To:
Discussion of precise time and frequency measurement
Subject:
Old color and a little expensive only one partial pictureBert Kehren
Sent from my Galaxy Tab® A
Original message From: Bob kb8tq Date: 2/24/18
9:30 AM (GMT-05:00) To: George Atkinson ,
Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Curious, h
I still stand by FRK, next to HP largest cell, Corby did it with a M 100 much
more difficult. I started on a FRK but because of a macular hole in my left eye
had to stop.First test should be to change time constant and monitor
performance.Remember the outstanding performance of the HP is do t
Corby is still asleep, on the old board it was 0.5 uF and 100K now 5 uF and
10K. Who knows what HP knew in the 60`s but it works and I dought that it is
critical. No where is there any fine tuning like two resistors in seriesBert
Kehren
Sent from my Galaxy Tab® A
Original message ---
We have pictures of the guts of a M100 the file is 1.8 M off list or permission
to postBert Kehren
Sent from my Galaxy Tab® A
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nut
Discooect I have seen them leak all over the placeBert Kehren
Sent from my Galaxy Tab® A
Original message From: Stan Date:
2/25/18 2:41 PM (GMT-05:00) To: time-nuts@febo.com Subject: [time-nuts]
Replacement Backup Battery for 5065A?
With all this recent 5065A talk I decide
me a note if this ok for you.
Try it.
Of course, from time to time I will clean up a bit.
Regards,
Arnold, DK2WT
Am 25.02.2018 um 15:05 schrieb ewkehren via time-nuts:
> We have pictures of the guts of a M100 the file is 1.8 M off list or
> permission to postBert Kehren
>
>
&g
We have decided to go with the 1012 do we need to do any thing with pin 5Bert
kehren
Sent from my Galaxy Tab® A
Original message From: Attila Kinali Date:
2/26/18 9:53 AM (GMT-05:00) To: Discussion of precise time and frequency
measurement Subject: Re: [time-nuts] Replacem
Thank you Attila, I have seen many FRK`and M 100 but not one like yours. Some
boards are very different and it is very difficult to get proper
documentation.Bert Kehren
Sent from my Galaxy Tab® A
Original message From: Attila Kinali Date:
2/27/18 5:30 AM (GMT-05:00) To: Dis
Which one are you talking aboutBert Kehren
Sent from my Galaxy Tab® A
Original message From: paul swed Date:
2/27/18 9:26 AM (GMT-05:00) To: Discussion of precise time and frequency
measurement Subject: Re: [time-nuts] FRK
Thanks for the pictures.
Curious on the rb lamp.
T
PaulI have never seen a FRK or M 100 that did not have a screw iin lamp but
Attila`s unit looks like nothing I have seen before, I am not a Corby but over
time 20 units have passed through my hands
Bert
Sent from my Galaxy Tab® A
Original message From: paul swed Date:
What is latest on a group buy, have I missed something I am ready to buy
Bert Kehren
Sent from my Galaxy Tab® A
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and f
The manager many not know but the market does and there have been announcements
and the stock is up and for the day the fifth most active of all US markets. At
2 pm #2 Bert Kehren
Sent from my Galaxy Tab® A
Original message From: "Richard (Rick) Karlquist"
Date: 3/3/18 9:
We only use three circuits Wenzel sn65ELT35 and LTC6957. For critical
applications it is the LTC we refer to it in our designs the Bruce circuit the
only problem is solderability, my eyes. Bought 25, to poor to buy junk and not
smart enough to select something less in critical applications.
BruceWisjh I had known about it a week ago and we could have added a board to
the A9 order. Next order is probably three weeks away ifIi can help contact me
off list Bert Kehren
Sent from my Galaxy Tab® A
Original message From: Bruce Griffiths
Date: 3/4/18 8:32 PM (GMT-
My 20 year old Junghans`s had no problemBert Kehren Palm City Florida
Sent from my Galaxy Tab® A
Original message From: Tom Van Baak
Date: 3/11/18 8:32 AM (GMT-05:00) To: Discussion of precise time and
frequency measurement Subject: Re: [time-nuts]
Recommendations for Main
I bought one too, is a mistake, I am holding my breath supposedly shipped I
previously bought two one for Jürg because it's performance, easier to clean up
Bert Kehren
Sent from my Galaxy Tab® A
Original message From: donald collie
Date: 4/10/18 1:43 AM (GMT-05
Looking at the pictures it is the same unit I bought. It is not dual oven bit
trimble works with LH right now shows tracking 10 satelites.Attached is data
that made me buy a second one for Jürg for $ 129 and one more for me for
$9.50.What you see is highly filtered data to see long time chang
I have run 2 Tbolts from thee same antenna in to my Tracor and see the
corrections are in no way correlated.Bert Kehren
Sent from my Galaxy Tab® A
Original message From: Florian Teply Date:
4/10/18 7:00 AM (GMT-05:00) To: time-nuts@febo.com Subject: Re: [time-nuts]
Dual GP
Most likely but PayPal will have to get involved since there are more than one
of usBert Kehren
Sent from my Galaxy Tab® A
Original message From: Clint Jay Date:
4/10/18 10:32 AM (GMT-05:00) To: Discussion of precise time and frequency
measurement Subject: Re: [time-nuts]
Jürg will have to explain he is in Switzerland will be tomorrowBert
Sent from my Galaxy Tab® A
Original message From: CORNACCHIA via time-nuts
Date: 4/10/18 2:35 PM (GMT-05:00) To: ewkehren via
time-nuts Subject: Re: [time-nuts] Dual GPSDO - any
advantage?
Bert may I
: ewkehren via
time-nuts Subject: Re: [time-nuts] Dual GPSDO - any
advantage?
Bert may I ask how you created the charts (what software are you using).Thank
You
On Tuesday, April 10, 2018, 9:04:58 a.m. EDT, ewkehren via time-nuts
wrote:
Looking at the pictures it is the same unit I bought
Do we know what the PHM development for Galileo cost?
Sent from Samsung tabletBob Camp wrote:Hi
> On Jan 10, 2017, at 2:45 AM, Dr. David Kirkby (Kirkby Microwave Ltd)
> wrote:
>
> Once 9 Jan 2017 12:59, "Bob Camp" wrote:
>>
>> Hi
>>
>> Ok here are some rough numbers:
>>
>>> On Jan 9, 2
Neil we have used M7 and I have boards contact me off list toBert Kehren
Sent from my Galaxy Tab® A
Original message From: Neil Smith G4DBN Date:
5/10/17 4:03 PM (GMT-05:00) To: Discussion of precise time and frequency
measurement Subject: [time-nuts] Anyone using UBLOX
Having had a fan failure on a well insulated Rb we use a temperature sensor
also used for compensation in to a PIC to shut down the systemBert Kehren
Sent from my Galaxy Tab® A
Original message From: "David G. McGaw"
Date: 5/10/17 11:20 PM (GMT-05:00) To:
Discussion of prec
Thanks I have 2. Will run some tests. In my opinion ADEV does hide changes in
Frequency and we see it when we compare ADEV plots with at the same time
frequency measurements. We see it with your plots on the Tbolt. The URQ shows
frequency specs 2E-12 most likely ADEVBert
Sent from my Galaxy Ta
Starting with a 10 second clean up loop for a FEI 5680/GPSDO to now 600 Seconds
using Wenzel's j circuit for the Tbolt we have a variety of boards. I am
presently out of country but when back will gladly attach some board designs,
material cost is minimal if there is interest.Bert Kehren
Sent
The PRS10 was intended as FRS alternative you can use the same plug with no
changes on both unitsBert Kehren
Sent from my Galaxy Tab® A
Original message From: Mark Sims Date:
10/7/17 1:58 PM (GMT-05:00) To: time-nuts@febo.com Subject: [time-nuts] PRS10
PRBB Shematics
SRS s
Tbolt is a good oneBert Kehren
Sent from my Galaxy Tab® A
Original message From: David J Taylor via time-nuts
Date: 11/1/17 12:07 PM (GMT-05:00) To:
time-nuts@febo.com Subject: Re: [time-nuts] Holdover, RTC for Pi as NTP GPS
source
From: Mark Sims
I have an analytical bal
35 matches
Mail list logo