Starting with a 10 second clean up loop for a FEI 5680/GPSDO to now 600 Seconds using Wenzel's j circuit for the Tbolt we have a variety of boards. I am presently out of country but when back will gladly attach some board designs, material cost is minimal if there is interest.Bert Kehren
Sent from my Galaxy Tab® A -------- Original message --------From: Hal Murray <[email protected]> Date: 9/23/17 9:39 PM (GMT-05:00) To: Discussion of precise time and frequency measurement <[email protected]> Cc: [email protected] Subject: Re: [time-nuts] True Position GPSDP + Rb X72 [email protected] said: > If the main use is feeding test gear (and not direct synthesis) an Rb may do > pretty well. Most instruments assume a dirty reference signal and clean it > up internally. What's the bandwidth on the typical cleanup PLL? How well does that match the noise from a Rb? -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
