Hey Guys,
Turns out my issue was that the ssl port on the 400 is not turned on. We
are getting a new iseries box soon and I will test that once we have it
all setup.
Thanks!
Best regards,
+--+
| Richard Houston .^. |
| R.L.H.
Richard and Pete
I just tested from my base here and all worked fine for connecting. It
asked me to accept the certificate and then created a SSL link using
both SSL2 and TLS. Not sure what the problem is. Oh and this was
straight from CVS. I wonder if maybe it is the build file not
including
Hello all
Have been away. I will take a look at the SSL to see if it works.
Regards
Kenneth
Pete Helgren wrote:
There is a pretty good setup article in the IBM iSeries knowledge base.
http://www-912.ibm.com/s_dir/slkbase.nsf/slkbase
Search using "17615517" (the
document number)
Yeah, the no connect error is the same thing I got.
Kenneth, do you have any insight on how to get the ssl working?
Best regards,
+--+
| Richard Houston .^. |
| R.L.H. Consulting /V\ |
| E-Mail [EMAIL PROTECTED]
This works for me in 0.5.7 pre3. When I start the session I am
prompted to accept the SSL cert and then I get the signon screen. It
was been quite a while since I set this up but I don't recall doing
much more than just following the SSLInstructions.html document.
Pete
Richard Houston
Thanks Pete,
Do you know where that doc is? Sorry for my ignorance here. :/
Also do we know if the ssl 5250 port is on by default on the AS/400 or do
we need to turn it on?
Best regards,
+--+
| Richard Houston .^. |
| R.L.H.
There is a pretty good setup article in the IBM iSeries knowledge base.
http://www-912.ibm.com/s_dir/slkbase.nsf/slkbase
Search using "17615517" (the
document number) you should have a hit on "SSL and Secure Telnet
Server Configuration". Make sure you have the correct licensed
programs
