My loop has an amp located at the loop but the sig at the radio was waaay
down.I added a DXE broadband amp at the operating desk to get the sigs back to
parity with my vertical.An internal preamp in a modern radio might do the trick
but even though I have a TS-890 I have not tried the preamp
For sure.mine are stapled to the groundon top!!
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Donald
Chester
Sent: Friday, October 12, 2018 10:35 PM
To: topband@contesting.com
Subject: Topband: Historical
Rick you are so right!
I do the same thing as you do.
Butone time I made the mistake of allowing the coaxes to lay on the
floornow I have 2 holes burned through the carpet in the shack.
Won't do that again!
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband
staples from DXE to
be sure they stayed down while the grass grew over them.
They have been out there for 8 years and I mow over them with no problem.
Stranded copper with some sort of tough UV resistant insulation.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband
in this case.
There is a chart on the Belden site indicating the color vs coax etc.
As I rememberthe box of 50 was about $26
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of HP
Sent: Thursday, October 5, 2017 5:09 PM
I was hearing it on 80mtrs too.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Don Kirk
Sent: Friday, September 8, 2017 8:14 AM
To: Bruce <k...@myfairpoint.net>
Cc: Topband <topband@contesting.com>
it.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Brian
Pease
Sent: Tuesday, April 25, 2017 1:18 PM
To: topband@contesting.com
Subject: Re: Topband: RBOG installation
Google "garden staples ebay". $11.5
Indeed!
Over several years of lurking Tom's website I have learned a LOT more than I
originally went there for.
He makes it actuallyuhhh...interesting!
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Louis
On the vidhe says the Pixel is 30' high.
That is too high.
My Pixel is nowhere near that noisy.
It is 7' high located in the clear.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Kenneth
Grimm
Sent: Monday
callsign tickled his ear..it
tickled my ear as well.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Tree
Sent: Friday, December 25, 2015 10:30 AM
To: 160 <topband@contesting.com>
Subject: Topband: A brief
that for a while I thought I was gonna have to fling
her in the can with them birds
And the owl.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Mike
Waters
Sent: Friday, November 20, 2015 6:35 PM
To: Donald Chester
the replacement of the whole length.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Dave
Olean
Sent: Monday, November 9, 2015 1:39 PM
To: topband@contesting.com
Subject: Topband: Why do rodents eat coax?
I
I have the DXE radial plate with 90 radials.
Well worth the money and it makes for a very clean installationno snarls
of wire.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Robert
Smits
Sent: Saturday
Nothing heard near Tulsa, OK
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of
k...@myfairpoint.net
Sent: Sunday, December 7, 2014 6:29 PM
To: Topband
Subject: Topband: Unknown Pulse Signal Wiping out 1900-1925 kHz
for connector specs.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Tony K1AMF
Sent: Monday, November 17, 2014 8:44 AM
To: topband@contesting.com
Subject: Topband: Help installing compression connectors
Anyone have any
of this reason.I did not
want the 450~ ladder line flapping in the breeze and causing maintenance
problems.
I could be wrong about the maintenancebut that's the excuse I told to
myself.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun
Get rid of the ROKU and get a modern TV with the web based apps built
inthen connect the tv to the internet and/or satellite.
I have a VISIO 65 3d tvnon plasma of course...works greatno QRM to
or from the tv.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From
Yep.I think the YAKITT outfits are all suffering from the
'notinventedhere' syndrome.
There is plenty of it out thereespecially in offshore mfgrs.
73
David Harmon
K6XYZ
Sperry, OK
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Jim Brown
18 matches
Mail list logo