Tony..... I use the same connector but not flooded coax. I use the QS coax from Lowes and after removing the outer braid and foil....the connector goes on nicely. But.....your flooded cable o/d could be too large for that connector. The Lowes RG-6QS o/d coax is .277. See the Belden site for connector specs.
73 David Harmon K6XYZ Sperry, OK -----Original Message----- From: Topband [mailto:[email protected]] On Behalf Of Tony K1AMF Sent: Monday, November 17, 2014 8:44 AM To: [email protected] Subject: Topband: Help installing compression connectors Anyone have any suggestions on how to install compression connectors on flooded RG6 quad shield coax with PE jacket? I'm using Belden Snap-N-Seal RG6QS compression connectors but they're nearly impossible to slip on far enough. I've tried removing the outer braid and foil and still no luck. Maybe I should be using different connectors? The coax I'm using for the beverage is Commscope F6SSEF / 4561804. Thanks, Tony/K1AMF _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
