Or RG8U confirmed on 6 bands
John k9uwa
On 23 Mar 2020 at 17:45, Mike Waters wrote:
> How about 5Y3GT? ;-)
>
John Goller, K9UWA & Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
ngle ground system.
John k9uwa
> I have a full size vertical built from 25G running against about 80 1/4
> WL radials - #18 insulated wire sewn into the ground an inch or two
> below ground. There is a single ground rod next to the base but no
> other ground rods on this tower.
&
mean
one
less dinner out with the wife in a reasonably priced place. And that too isn't
going
to break most of us either. So please think about the above not only for this
DXpedition but also others in the future.
John k9uwa
John Goller, K9UWA & Jean Goller, N9PXF
Antique Radio Restorations
a little extra button available. https://clublog.org/logsearch/V84SAA
Lets show our appreciation.
73
John k9uwa
> FANTASTIC job Jeff ! ! !
>
> My hat is off to both of you and the team, to make this happen. It was not
> easy
> or cheap, I am sure.
>
> Mike VE9AA
John Goller
A great big THANKS to Jeff, Krassy and all the other ops as well for doing one
super job of putting V84SAA into many many logs throughout the World. This in a
winter season when low band propagation hasn't been all that good was one
super DX-Pedition.
73
John k9uwa
> GA All
> Teardo
y were due to water getting into the
connectors. The failures after 30 years were do my tape job on the fittings.
Not to
the method of install or the connectors.
John k9uwa
>
> What's the way to solder a UHF male?
>
> Rob
> K5UJ
John Goller, K9UWA & Jean Goller, N9PXF
He filed LOTW back in 2009 with callsign of OK1RD
John k9uwa
> >>"There have been no uploads for OK1YQ therefore it all has to be cards. 73
>
> Clive GM3POI"
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
He filed LOTW back in 2009 with callsign of OK1RD
John k9uwa
> >>"There have been no uploads for OK1YQ therefore it all has to be cards. 73
>
> Clive GM3POI"
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
from others.
#3 Soil Conductivity that patch showing 30 in the very south of Texas looks
good
as long as #1 and #2 above are met.
John k9uwa only 29 left on my 160m Need List
> If you are interested in topband propagation. . .being located in the north,
> or
> at least the north cen
what is OK and what is Not OK by their rules and
morals. Probably an honest poll of all on the topband reflector I doubt you
would
get many votes on the above list that were identical as to yes, no or maybe on
every point above. Given a bit of time I am sure I could think up a few more.
John k9uw
up to 10-15 dB below the noise level. So why can't the
human voice be processed in a similar manner?
73
John k9uwa "TopBand since 1971"
We've Come A Long Way, Baby
> Now, over to you other topbanders, especially those who have dabbled
with FT-8
> and live in more populous area
that called Digital.
Put me in the group who of those who arrived kicking, screaming and being
drug from Tubes to Solid state. From AM to SSB. From Analog to Digital. It
is called advancements in technology. I still dislike cellphones. But I use
them. And also all other forms of Ham Radio.
John
crotchety men who resist change. Either you
like it and use it or you don't like it and don't use it. No amount of crabbing
about it is going to change it.
73
John k9uwa
_
Topband Reflector Archives - http://www.contesting.com/_topband
"160 not a band but an obsession"
Garry is correct. No other HF Ham Band is like it. The Last Frontier !!
John k9uwa
John Goller, K9UWA & Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo
transmit
antenna to receive antenna is whatever your 100 watt radio will do. Most
likely not enough to smoke the Pre-Amp and or the Radio. So please be
sure to add that item to your version of the FES.
John k9uwa
John Goller, K9UWA Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
. Even
then who is to say that Joe Doe wasn't off visiting some ham buddy on the
other side of the country? Then it is legal under current rules. And no one
complains about that type of operation.
John k9uwa
John Goller, K9UWA Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
TV
with his wife while also having a headset on that has wireless earphones
and mic ... running some stations on 20M through his own station in the next
room... except that would be much faster. Nealy No Latency.
73
John k9uwa
The contacts were not made via the internet, they were made using
don't want to try it that way consider renting this gadget
designed to bury cable TV lines coax and other wires.
https://www.youtube.com/watch?v=DGa-3HY38W4
John k9uwa
Jorge,
The following year I just laid the wire on the ground (tightly), pinned it
down here and there with small homemade
. Then the
Window made a bit more sense.
John k9uwa
John Goller, K9UWA Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426
---
This email is free from viruses and malware because avast
Antenna during
Receive. Only needed to deal with relay for 100 watts that way. Relay needs to
be fast closing and slow in opening to
as Tom says prevent hot switching.
John k9uwa
John Goller, K9UWA Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
Visit our Web Site at:
http
that removes and grounds the RCV antenna doesn't
work for some reason it won't allow you to key your Amplifier.
John k9uwa
John Goller, K9UWA Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1
Exactly Correct Peter
Put a dozen high powered EU stations in the 5 Khz Window and THEY can't
hear any of the US/VE stations called them.
John k9uwa
I agree when the discussion is about the ARRL 160m contest only.
But, how many stations outside W/VE can share those 5kHz?
73
Peter, DJ7WW
Congratulations to Fred, Peter, Tomi and George for an exceptional DX-Pedition
under very adverse conditions.
Many thanks also to Oms and many others behind the scene who made this
operation happen.
I made my QSO on 160 and enjoyed listening to all the other bands and pileups.
John k9uwa
John
.
John k9uwa
With all the explanations and angst over this type of behavior truly it comes
down simply to pure unabashed idiocy by our comrades. I'd just like to sit
next to one of these guys while they r doing it and ask why? Are they serious
about trying to make a contact calling out of turn
loss of maybe 5 to 10 ohms the antenna would be much more efficient. It
would then require a 2 to 1 Un Un to match the now around 25 ohm antenna
to your 50 ohm coax. Your signal will be considerably stronger as you won't
be warming the worms as badly as you are now.
John k9uwa
Although I'm far
or transmit
ability on 160.
It seems to me that RG-6 is pretty good coax for our purposes.
John k9uwa
On 10/9/2011 3:33 PM, John K9UWA wrote:
can you tell me why one would NOT want to use the common variety of a
RG-6 that has a few strands of braid.. and foil + foam insulation
26 matches
Mail list logo
