Hi Van Man :-),
On Thu, Feb 14, 2019 at 08:47:14AM +, Man in a van wrote:
>With the EDO installed, go to
>
>
>Code:
>
>Settings > Audio Settings >Digital Output > Digital Only
>
>
>
>Connect the spdif via the co-ax to utilse the higher bit rate
>
Hi Christian
With the EDO installed, go to
Code:
Settings > Audio Settings >Digital Output > Digital Only
Connect the spdif via the co-ax to utilse the higher bit rate
Check that the Fixed Volume is set to 100%
I looked for info on the web
Touch SPDIF and analog outs are always both active unless you've
disabled one using EDO.
Why not uninstall EDO and use SPDIF?
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
View this thread:
But can I really switch the inputs via the menues of the Touch only? How
can I switch from RCA to RCA digital or sp/dif? Is this not possible in
the settings of the player or the webinterface of my local LMS?
Ciao + thx,
Schoepp
___
Touch mailing
I've installed the EDO plugin via the supported way and the menues
of the Touch with sighted help now, but the DAC is still not found, Its
the DAC-40 from Accuphase. It has also RCA digital and a optical input,
so I can also use this and there is no need for USB, just wanted to
try But I
garym wrote:
> Perhaps his DAC has USB input only.
Good point, sorry.
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
View this thread: http://forums.slimdevices.com/showthread.php?t=110180
Did you check the spreadsheet on EDO thread post #1
(https://forums.slimdevices.com/showthread.php?94512-Announce-Enhanced-Digital-Output-app-USB-Dac-and-192k-Digital-Ouput=699737=1#post699737
) for your DAC - for many DACs it gives hints about whether hubs,
kernel etc may be needed.
Apesbrain wrote:
>
> Touch without EDO will do up to 24/96. You need more than that? What
> DAC are you using and how are they connected?
Perhaps his DAC has USB input only. If not, and for example has S/PDIF
or Optical, I'd recommend using one of these connections over trying to
use EDO.
When you reboot the Touch (press button on left back above power port),
you will see a startup message about EDO being loaded. It is in the
upper left of the screen and maybe you can see it flash by if not
totally blind.
Not sure why you went the route you did with installing EDO. The
Hi,
I've manualy installed the EDO plugin to my touch by performing the
following steps:
- Downloaded the EDO plugin zip file from
https://code.google.com/archive/p/triodeapplets/downloads.
- Unpacked the EnhancedDigitalOutput-v0.8.zip file and copyd the files
to the touch into the
10 matches
Mail list logo
