[Touch-packages] [Bug 1944081] Re: Package Manager indicator has incorrect, old wording and bad grammar
** Attachment added: "Screenshot of error menu" https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1944081/+attachment/5526288/+files/package-manager-right-click.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1944081 Title: Package Manager indicator has incorrect, old wording and bad grammar Status in software-properties package in Ubuntu: New Bug description: If I create an issue with installed packages, I get a "no entry sign" icon in my Ubuntu 20.04 top panel. (I am not sure which package creates this indicator; please reassign if it's not software- properties.) This indicator has a menu (screenshot attached) with text reading: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: ' Error: BrokenCount > 0' This usually means that your installed packages have unmet dependencies This message has numerous problems. 1. There is no "right-click menu"; a left-click or a right-click on this icon both show the same thing 2. There is no "Package Manager" entry in the shown menu (there is the error message above, a separator, "Show updates", a separator, "Show notifications", and "Preferences") 3. It recommends running "apt-get" which should be "apt" 4. The error message has a space at the start of it 5. The error message uses straight quotes rather than typographic quotes 6. It does not end with a full stop despite being written as prose ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: software-properties-gtk 0.98.9.5 ProcVersionSignature: Ubuntu 5.11.0-27.29~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-27-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sun Sep 19 17:07:00 2021 InstallationDate: Installed on 2020-06-20 (456 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1944081/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1944081] [NEW] Package Manager indicator has incorrect, old wording and bad grammar
Public bug reported: If I create an issue with installed packages, I get a "no entry sign" icon in my Ubuntu 20.04 top panel. (I am not sure which package creates this indicator; please reassign if it's not software-properties.) This indicator has a menu (screenshot attached) with text reading: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: ' Error: BrokenCount > 0' This usually means that your installed packages have unmet dependencies This message has numerous problems. 1. There is no "right-click menu"; a left-click or a right-click on this icon both show the same thing 2. There is no "Package Manager" entry in the shown menu (there is the error message above, a separator, "Show updates", a separator, "Show notifications", and "Preferences") 3. It recommends running "apt-get" which should be "apt" 4. The error message has a space at the start of it 5. The error message uses straight quotes rather than typographic quotes 6. It does not end with a full stop despite being written as prose ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: software-properties-gtk 0.98.9.5 ProcVersionSignature: Ubuntu 5.11.0-27.29~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-27-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sun Sep 19 17:07:00 2021 InstallationDate: Installed on 2020-06-20 (456 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1944081 Title: Package Manager indicator has incorrect, old wording and bad grammar Status in software-properties package in Ubuntu: New Bug description: If I create an issue with installed packages, I get a "no entry sign" icon in my Ubuntu 20.04 top panel. (I am not sure which package creates this indicator; please reassign if it's not software- properties.) This indicator has a menu (screenshot attached) with text reading: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: ' Error: BrokenCount > 0' This usually means that your installed packages have unmet dependencies This message has numerous problems. 1. There is no "right-click menu"; a left-click or a right-click on this icon both show the same thing 2. There is no "Package Manager" entry in the shown menu (there is the error message above, a separator, "Show updates", a separator, "Show notifications", and "Preferences") 3. It recommends running "apt-get" which should be "apt" 4. The error message has a space at the start of it 5. The error message uses straight quotes rather than typographic quotes 6. It does not end with a full stop despite being written as prose ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: software-properties-gtk 0.98.9.5 ProcVersionSignature: Ubuntu 5.11.0-27.29~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-27-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sun Sep 19 17:07:00 2021 InstallationDate: Installed on 2020-06-20 (456 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1944081/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1844426] Re: Impossible to set up Livepatch on Ubuntu MATE
I think the place to fix this may be in _spawn_goa_with_args in https://git.launchpad.net/ubuntu/+source/software-properties/tree/softwareproperties/gtk/DialogAuth.py#n196. Perhaps that function should check for XDG_CURRENT_DESKTOP=GNOME and if it isn't GNOME, pop up a message window pointing to a wiki page which can then be edited by flavours to explain what to do to sign in to Ubuntu One and/or Livepatch in their desktops? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1844426 Title: Impossible to set up Livepatch on Ubuntu MATE Status in Ubuntu MATE: Confirmed Status in software-properties package in Ubuntu: Confirmed Bug description: In Ubuntu MATEE 18.04, in the Software Properties window (available from Software Boutique > Preferences > Show Software Sources > Manage Repositories, among other places), there is a Livepatch tab. This tab says "To use Livepatch, you need to sign in" and provides a "Sign In..." button. This button launches an empty version of gnome-control-center with no icons in it. If one is technically adept, it is possible to do what (I think) that button is trying to do by launching g-c-c directly in a terminal and overriding the desktop, thus: env XDG_CURRENT_DESKTOP=GNOME gnome-control-center online-accounts This online accounts window permits attempting to add an Ubuntu One account. However, when one tries, a window pops up with a place to add one's Ubuntu One username and password, but the window has no Submit button; there is no way to actually initiate sign in. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1844426/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1844426] Re: Impossible to set up Livepatch on Ubuntu MATE
Understood that gnome-control-centre isn't meant to be used outside GNOME. However, software-properties *is* meant to be used outside GNOME, so perhaps it should detect whether it's running in GNOME and not show a button for a GNOME-only bit of software in that situation? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1844426 Title: Impossible to set up Livepatch on Ubuntu MATE Status in Ubuntu MATE: Confirmed Status in software-properties package in Ubuntu: Confirmed Bug description: In Ubuntu MATEE 18.04, in the Software Properties window (available from Software Boutique > Preferences > Show Software Sources > Manage Repositories, among other places), there is a Livepatch tab. This tab says "To use Livepatch, you need to sign in" and provides a "Sign In..." button. This button launches an empty version of gnome-control-center with no icons in it. If one is technically adept, it is possible to do what (I think) that button is trying to do by launching g-c-c directly in a terminal and overriding the desktop, thus: env XDG_CURRENT_DESKTOP=GNOME gnome-control-center online-accounts This online accounts window permits attempting to add an Ubuntu One account. However, when one tries, a window pops up with a place to add one's Ubuntu One username and password, but the window has no Submit button; there is no way to actually initiate sign in. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1844426/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1677202] Re: Sound playback delays
Yup; wired audio, on a normal 3.5mm jack headphone cable (not HDMI or similar). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1677202 Title: Sound playback delays Status in pulseaudio package in Ubuntu: New Bug description: Sound playback on my machine seems to be delayed. Playing an error beep hangs for half a second or so before playing, making tab completion extremely irritating (because the completion itself also hangs); starting a video or music track is silent for the first second or so. This seems to be fixed, as per http://askubuntu.com/questions/218444/sound-output-starts- delayed/440787#440787, by disabling pulseaudio's "module-suspend-on- idle" feature. I don't need this feature at all because my machine is a desktop box without a battery, permanently plugged into power, and therefore any minimal power saving it produces is far outweighed by the annoyance. However, since other people don't experience this problem, perhaps it's chipset specific? I also experience Audacity taking a long time to start up, which also seems to have been helped by this fix. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3.2 ProcVersionSignature: Ubuntu 4.4.0-66.87-generic 4.4.44 Uname: Linux 4.4.0-66-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: GNOME Date: Wed Mar 29 11:56:24 2017 InstallationDate: Installed on 2014-04-07 (1087 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: pulseaudio UpgradeStatus: Upgraded to xenial on 2016-08-04 (237 days ago) dmi.bios.date: 12/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1707 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: PCS dmi.chassis.type: 3 dmi.chassis.vendor: PC SPECIALIST dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1707:bd12/13/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ87-A:rvrRev1.xx:cvnPCSPECIALIST:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2017-03-29T11:51:11.884294 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1677202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1677202] [NEW] Sound playback delays
Public bug reported: Sound playback on my machine seems to be delayed. Playing an error beep hangs for half a second or so before playing, making tab completion extremely irritating (because the completion itself also hangs); starting a video or music track is silent for the first second or so. This seems to be fixed, as per http://askubuntu.com/questions/218444 /sound-output-starts-delayed/440787#440787, by disabling pulseaudio's "module-suspend-on-idle" feature. I don't need this feature at all because my machine is a desktop box without a battery, permanently plugged into power, and therefore any minimal power saving it produces is far outweighed by the annoyance. However, since other people don't experience this problem, perhaps it's chipset specific? I also experience Audacity taking a long time to start up, which also seems to have been helped by this fix. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3.2 ProcVersionSignature: Ubuntu 4.4.0-66.87-generic 4.4.44 Uname: Linux 4.4.0-66-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: GNOME Date: Wed Mar 29 11:56:24 2017 InstallationDate: Installed on 2014-04-07 (1087 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: pulseaudio UpgradeStatus: Upgraded to xenial on 2016-08-04 (237 days ago) dmi.bios.date: 12/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1707 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: PCS dmi.chassis.type: 3 dmi.chassis.vendor: PC SPECIALIST dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1707:bd12/13/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ87-A:rvrRev1.xx:cvnPCSPECIALIST:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2017-03-29T11:51:11.884294 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug third-party-packages xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1677202 Title: Sound playback delays Status in pulseaudio package in Ubuntu: New Bug description: Sound playback on my machine seems to be delayed. Playing an error beep hangs for half a second or so before playing, making tab completion extremely irritating (because the completion itself also hangs); starting a video or music track is silent for the first second or so. This seems to be fixed, as per http://askubuntu.com/questions/218444/sound-output-starts- delayed/440787#440787, by disabling pulseaudio's "module-suspend-on- idle" feature. I don't need this feature at all because my machine is a desktop box without a battery, permanently plugged into power, and therefore any minimal power saving it produces is far outweighed by the annoyance. However, since other people don't experience this problem, perhaps it's chipset specific? I also experience Audacity taking a long time to start up, which also seems to have been helped by this fix. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3.2 ProcVersionSignature: Ubuntu 4.4.0-66.87-generic 4.4.44 Uname: Linux 4.4.0-66-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: GNOME Date: Wed Mar 29 11:56:24 2017 InstallationDate: Installed on 2014-04-07 (1087 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: pulseaudio UpgradeStatus: Upgraded to xenial on 2016-08-04 (237 days ago) dmi.bios.date: 12/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1707 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: PCS dmi.chassis.type: 3 dmi.chassis.vendor: PC SPECIALIST dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1707:bd12/13/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ87-A:rvrRev1.xx:cvnPCSPECIALIST:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2017-03-29T11:51:11.884294 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1677202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-package
[Touch-packages] [Bug 1619801] [NEW] upstart-monitor does not work in no-gui mode if Gtk is not available
Public bug reported: upstart-monitor attempts to detect if graphical modules are not available and run in no-gui mode (and this can also be explicitly specified on the command line). However, if the modules are not available, Python fails to parse the code because something inherits from Gtk.Window even though Gtk is not available. # upstart-monitor --no-gui WARNING: GUI modules not available - falling back to CLI Traceback (most recent call last): File "/usr/bin/upstart-monitor", line 196, in class UpstartEventsGui(Gtk.Window): NameError: name 'Gtk' is not defined ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: upstart-monitor 1.13.2-0ubuntu21.1 ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16 Uname: Linux 4.4.0-36-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 BootLog: /dev/sda2: clean, 3305789/9920512 files, 35711207/39670016 blocks [[0;1;31mFAILED[0m] Failed to start Automatically refresh installed snaps. See 'systemctl status snapd.refresh.service' for details. CurrentDesktop: Unity Date: Fri Sep 2 22:45:21 2016 InstallationDate: Installed on 2014-04-07 (879 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) PackageArchitecture: all ProcKernelCmdline: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=ad1b3110-ee9a-4dac-839d-604080e0020d ro quiet splash vt.handoff=7 SourcePackage: upstart UpgradeStatus: Upgraded to xenial on 2016-08-04 (29 days ago) UpstartBugCategory: System UpstartRunningSessionVersion: upstart 1.13.2 UpstartRunningSystemJobs: Error: command ['initctl', '--system', 'list'] failed with exit code 1: initctl: Name "com.ubuntu.Upstart" does not exist UpstartRunningSystemVersion: Error: command ['initctl', '--system', 'version'] failed with exit code 1: initctl: Name "com.ubuntu.Upstart" does not exist ** Affects: upstart (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug third-party-packages xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1619801 Title: upstart-monitor does not work in no-gui mode if Gtk is not available Status in upstart package in Ubuntu: New Bug description: upstart-monitor attempts to detect if graphical modules are not available and run in no-gui mode (and this can also be explicitly specified on the command line). However, if the modules are not available, Python fails to parse the code because something inherits from Gtk.Window even though Gtk is not available. # upstart-monitor --no-gui WARNING: GUI modules not available - falling back to CLI Traceback (most recent call last): File "/usr/bin/upstart-monitor", line 196, in class UpstartEventsGui(Gtk.Window): NameError: name 'Gtk' is not defined ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: upstart-monitor 1.13.2-0ubuntu21.1 ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16 Uname: Linux 4.4.0-36-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 BootLog: /dev/sda2: clean, 3305789/9920512 files, 35711207/39670016 blocks [[0;1;31mFAILED[0m] Failed to start Automatically refresh installed snaps. See 'systemctl status snapd.refresh.service' for details. CurrentDesktop: Unity Date: Fri Sep 2 22:45:21 2016 InstallationDate: Installed on 2014-04-07 (879 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) PackageArchitecture: all ProcKernelCmdline: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=ad1b3110-ee9a-4dac-839d-604080e0020d ro quiet splash vt.handoff=7 SourcePackage: upstart UpgradeStatus: Upgraded to xenial on 2016-08-04 (29 days ago) UpstartBugCategory: System UpstartRunningSessionVersion: upstart 1.13.2 UpstartRunningSystemJobs: Error: command ['initctl', '--system', 'list'] failed with exit code 1: initctl: Name "com.ubuntu.Upstart" does not exist UpstartRunningSystemVersion: Error: command ['initctl', '--system', 'version'] failed with exit code 1: initctl: Name "com.ubuntu.Upstart" does not exist To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1619801/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1600331] Re: Sharing a URL while text is selected could add the text to the shared ContentItem
(It may be useful to add a "Share" item to the menu that pops up when text is selected, whcih does the same thing: shares a ContentItem with text="the selected text", url="the page URL". -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1600331 Title: Sharing a URL while text is selected could add the text to the shared ContentItem Status in webbrowser-app package in Ubuntu: Confirmed Bug description: If some text is selected when the user selects Share in the web browser, the browser could add that selected text to the ContentItem it shares (as well as keeping the URL set to the URL of the page). This would make it possible to build apps like Android's Xcerpt (https://play.google.com/store/apps/details?id=com.transcendentlabs.xcerpt) which formats the text and link into a nice image for uploading to Twitter. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1600331/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1600331] [NEW] Sharing a URL while text is selected could add the text to the shared ContentItem
Public bug reported: If some text is selected when the user selects Share in the web browser, the browser could add that selected text to the ContentItem it shares (as well as keeping the URL set to the URL of the page). This would make it possible to build apps like Android's Xcerpt (https://play.google.com/store/apps/details?id=com.transcendentlabs.xcerpt) which formats the text and link into a nice image for uploading to Twitter. ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1600331 Title: Sharing a URL while text is selected could add the text to the shared ContentItem Status in webbrowser-app package in Ubuntu: Confirmed Bug description: If some text is selected when the user selects Share in the web browser, the browser could add that selected text to the ContentItem it shares (as well as keeping the URL set to the URL of the page). This would make it possible to build apps like Android's Xcerpt (https://play.google.com/store/apps/details?id=com.transcendentlabs.xcerpt) which formats the text and link into a nice image for uploading to Twitter. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1600331/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1598973] [NEW] No way to set a background image on a scope
Public bug reported: A scope header may have a custom background image (by setting PageHeader.Background in the scope.ini file), but the main body of a scope cannot. One can set a custom background _colour_ on the scope body, but not an image. ** Affects: unity-scopes-api (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scopes-api in Ubuntu. https://bugs.launchpad.net/bugs/1598973 Title: No way to set a background image on a scope Status in unity-scopes-api package in Ubuntu: New Bug description: A scope header may have a custom background image (by setting PageHeader.Background in the scope.ini file), but the main body of a scope cannot. One can set a custom background _colour_ on the scope body, but not an image. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1598973/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1598933] [NEW] ShapeImages in scope ini file is ignored
Public bug reported: I've set ShapeImages=false in my scope's ini file, and yet the images are still shaped. In particular, images with a transparent background get a shaped frame drawn around them, which looks terribly ugly. ** Affects: unity-scopes-api (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scopes-api in Ubuntu. https://bugs.launchpad.net/bugs/1598933 Title: ShapeImages in scope ini file is ignored Status in unity-scopes-api package in Ubuntu: New Bug description: I've set ShapeImages=false in my scope's ini file, and yet the images are still shaped. In particular, images with a transparent background get a shaped frame drawn around them, which looks terribly ugly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1598933/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1553774] Re: Add a Copy to Clipboard option in Share text and URLs
Users can now install Copy to Clipboard (https://uappexplorer.com/app/sharecopytoclipboard.sil), which puts a "copy to clipboard" item in the Share menu, but this _really_ ought to be presented by default I think. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to content-hub in Ubuntu. https://bugs.launchpad.net/bugs/1553774 Title: Add a Copy to Clipboard option in Share text and URLs Status in Canonical System Image: Confirmed Status in Ubuntu UX: New Status in content-hub package in Ubuntu: Confirmed Bug description: I think a good idea could be add a new icon in the Share system page for copy urls and text. Thanks in advance To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1553774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1567288] [NEW] Online docs speak of version 1.1, not 1.3
Public bug reported: https://developer.ubuntu.com/api/apps/qml/sdk-15.04.3/Ubuntu.Content/ (and pages under it such as https://developer.ubuntu.com/api/apps/qml/sdk-15.04.3/Ubuntu.Content.index/) say that the current version of Ubuntu.Content is 1.1, when it's 1.3 in framework version 15.04.3. ** Affects: content-hub (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to content-hub in Ubuntu. https://bugs.launchpad.net/bugs/1567288 Title: Online docs speak of version 1.1, not 1.3 Status in content-hub package in Ubuntu: New Bug description: https://developer.ubuntu.com/api/apps/qml/sdk-15.04.3/Ubuntu.Content/ (and pages under it such as https://developer.ubuntu.com/api/apps/qml/sdk-15.04.3/Ubuntu.Content.index/) say that the current version of Ubuntu.Content is 1.1, when it's 1.3 in framework version 15.04.3. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/content-hub/+bug/1567288/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1567140] [NEW] “Select All” pop up shows all the time, even when nothing is selected
Public bug reported: In the Twitter web app, if I reply to a tweet, I see the Select All pop up under the cursor all the time, which is rather disconcerting. ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** Attachment added: "screenshot20160407_003732673.png" https://bugs.launchpad.net/bugs/1567140/+attachment/4626801/+files/screenshot20160407_003732673.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1567140 Title: “Select All” pop up shows all the time, even when nothing is selected Status in webbrowser-app package in Ubuntu: New Bug description: In the Twitter web app, if I reply to a tweet, I see the Select All pop up under the cursor all the time, which is rather disconcerting. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1567140/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1567019] [NEW] "Copy" selected text works but gives no indication that it has
Public bug reported: After selecting text in the browser, it is now possible to copy it from the "Select All | Copy" popup (hooray!), and tapping Copy does copy the selected text to the clipboard, but there's no indication that it's done so. I therefore hit the Copy button about twelve times, thinking that it wasn't doing anything. ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1567019 Title: "Copy" selected text works but gives no indication that it has Status in webbrowser-app package in Ubuntu: New Bug description: After selecting text in the browser, it is now possible to copy it from the "Select All | Copy" popup (hooray!), and tapping Copy does copy the selected text to the clipboard, but there's no indication that it's done so. I therefore hit the Copy button about twelve times, thinking that it wasn't doing anything. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1567019/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1566778] Re: Documentation on anchoring and PageHeader is confusing
** Description changed: It is not very clear how one is best to have, for example, a Page with a PageHeader and a ListView, and have the ListView take up the whole page. Page { - PageHeader {} + header:PageHeader {} ListView {} } This has changed quite a lot in different versions of the UITK -- should the ListView be set to anchors.fill: parent? Or anchors.top: page.top? Or anchors.top: pageheader.bottom? Should Page.flickable be set to the ListView, or will that be set automatically, or is it deprecated in favour of PageHeader.flickable, and does that have to be set explicitly or will it be set automatically? Should one set the ListView to anchors.fill:parent with a topMargin of pageheader.height as the UITK gallery does? It would be very useful to have a series of examples with diagrams showing how to achieve various standard effects, for example: 1. a page with a header and a listview, where the listview takes up the whole page and the header scrolls away as the listview is scrolled 2. a page with a header and a listview, where the listview takes up the whole page and the header does not scroll away but stays fixed 3. a page with a header and a button which stays fixed under the header, and a listview which takes up the rest of the page and scrolls etc. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1566778 Title: Documentation on anchoring and PageHeader is confusing Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: It is not very clear how one is best to have, for example, a Page with a PageHeader and a ListView, and have the ListView take up the whole page. Page { header:PageHeader {} ListView {} } This has changed quite a lot in different versions of the UITK -- should the ListView be set to anchors.fill: parent? Or anchors.top: page.top? Or anchors.top: pageheader.bottom? Should Page.flickable be set to the ListView, or will that be set automatically, or is it deprecated in favour of PageHeader.flickable, and does that have to be set explicitly or will it be set automatically? Should one set the ListView to anchors.fill:parent with a topMargin of pageheader.height as the UITK gallery does? It would be very useful to have a series of examples with diagrams showing how to achieve various standard effects, for example: 1. a page with a header and a listview, where the listview takes up the whole page and the header scrolls away as the listview is scrolled 2. a page with a header and a listview, where the listview takes up the whole page and the header does not scroll away but stays fixed 3. a page with a header and a button which stays fixed under the header, and a listview which takes up the rest of the page and scrolls etc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1566778/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1566778] [NEW] Documentation on anchoring and PageHeader is confusing
Public bug reported: It is not very clear how one is best to have, for example, a Page with a PageHeader and a ListView, and have the ListView take up the whole page. Page { header:PageHeader {} ListView {} } This has changed quite a lot in different versions of the UITK -- should the ListView be set to anchors.fill: parent? Or anchors.top: page.top? Or anchors.top: pageheader.bottom? Should Page.flickable be set to the ListView, or will that be set automatically, or is it deprecated in favour of PageHeader.flickable, and does that have to be set explicitly or will it be set automatically? Should one set the ListView to anchors.fill:parent with a topMargin of pageheader.height as the UITK gallery does? It would be very useful to have a series of examples with diagrams showing how to achieve various standard effects, for example: 1. a page with a header and a listview, where the listview takes up the whole page and the header scrolls away as the listview is scrolled 2. a page with a header and a listview, where the listview takes up the whole page and the header does not scroll away but stays fixed 3. a page with a header and a button which stays fixed under the header, and a listview which takes up the rest of the page and scrolls etc. ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Assignee: Tim Peeters (tpeeters) Status: New ** Description changed: It is not very clear how one is best to have, for example, a Page with a PageHeader and a ListView, and have the ListView take up the whole page. Page { - PageHeader {} - ListView {} + PageHeader {} + ListView {} } This has changed quite a lot in different versions of the UITK -- should the ListView be set to anchors.fill: parent? Or anchors.top: page.top? Or anchors.top: pageheader.bottom? Should Page.flickable be set to the ListView, or will that be set automatically, or is it deprecated in favour of PageHeader.flickable, and does that have to be set explicitly - or will it be set automatically? It would be very useful to have a - series of examples with diagrams showing how to achieve various standard - effects, for example: + or will it be set automatically? Should one set the ListView to + anchors.fill:parent with a topMargin of pageheader.height as the UITK + gallery does? + + It would be very useful to have a series of examples with diagrams + showing how to achieve various standard effects, for example: 1. a page with a header and a listview, where the listview takes up the whole page and the header scrolls away as the listview is scrolled 2. a page with a header and a listview, where the listview takes up the whole page and the header does not scroll away but stays fixed 3. a page with a header and a button which stays fixed under the header, and a listview which takes up the rest of the page and scrolls etc. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1566778 Title: Documentation on anchoring and PageHeader is confusing Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: It is not very clear how one is best to have, for example, a Page with a PageHeader and a ListView, and have the ListView take up the whole page. Page { header:PageHeader {} ListView {} } This has changed quite a lot in different versions of the UITK -- should the ListView be set to anchors.fill: parent? Or anchors.top: page.top? Or anchors.top: pageheader.bottom? Should Page.flickable be set to the ListView, or will that be set automatically, or is it deprecated in favour of PageHeader.flickable, and does that have to be set explicitly or will it be set automatically? Should one set the ListView to anchors.fill:parent with a topMargin of pageheader.height as the UITK gallery does? It would be very useful to have a series of examples with diagrams showing how to achieve various standard effects, for example: 1. a page with a header and a listview, where the listview takes up the whole page and the header scrolls away as the listview is scrolled 2. a page with a header and a listview, where the listview takes up the whole page and the header does not scroll away but stays fixed 3. a page with a header and a button which stays fixed under the header, and a listview which takes up the rest of the page and scrolls etc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1566778/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1566741] [NEW] Tabs and Page with PageHeader shows two headers
Public bug reported: If I use a Tabs component, and place a Page in one of the Tabs, and that Page has a new-style PageHeader, then my app shows two separate headers. Tabs { Tab { page:Page { header: PageHeader { id: pageHeader title: i18n.tr("MyApp") } } } Tab { title: i18n.tr("Simple page") page: Page { Label { id: label anchors.centerIn: parent text: "A centered label" } } } } ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Assignee: Tim Peeters (tpeeters) Status: New ** Attachment added: "Screenshot at 16-04-06 10.09.46.png" https://bugs.launchpad.net/bugs/1566741/+attachment/4625749/+files/Screenshot%20at%2016-04-06%2010.09.46.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1566741 Title: Tabs and Page with PageHeader shows two headers Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: If I use a Tabs component, and place a Page in one of the Tabs, and that Page has a new-style PageHeader, then my app shows two separate headers. Tabs { Tab { page:Page { header: PageHeader { id: pageHeader title: i18n.tr("MyApp") } } } Tab { title: i18n.tr("Simple page") page: Page { Label { id: label anchors.centerIn: parent text: "A centered label" } } } } To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1566741/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1566736] [NEW] Tabs documentation page example does not work (Page.tools no longer exists)
Public bug reported: The Tabs documentation page (https://developer.ubuntu.com/api/apps/qml/sdk-15.04.1/Ubuntu.Components.Tabs/) contains a primary documentation example that does not work: it uses Page.tools, which no longer exists. import QtQuick 2.4 import Ubuntu.Components 1.3 import Ubuntu.Components.ListItems 1.3 as ListItem MainView { width: units.gu(48) height: units.gu(60) Tabs { id: tabs Tab { title: i18n.tr("Simple page") page: Page { Label { id: label anchors.centerIn: parent text: "A centered label" } tools: ToolbarItems { ToolbarButton { text: "action" onTriggered: print("action triggered") } } } } (snip) ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Assignee: Tim Peeters (tpeeters) Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1566736 Title: Tabs documentation page example does not work (Page.tools no longer exists) Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: The Tabs documentation page (https://developer.ubuntu.com/api/apps/qml/sdk-15.04.1/Ubuntu.Components.Tabs/) contains a primary documentation example that does not work: it uses Page.tools, which no longer exists. import QtQuick 2.4 import Ubuntu.Components 1.3 import Ubuntu.Components.ListItems 1.3 as ListItem MainView { width: units.gu(48) height: units.gu(60) Tabs { id: tabs Tab { title: i18n.tr("Simple page") page: Page { Label { id: label anchors.centerIn: parent text: "A centered label" } tools: ToolbarItems { ToolbarButton { text: "action" onTriggered: print("action triggered") } } } } (snip) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1566736/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1566735] [NEW] Tabs documentation does not mention that Tabs are deprecated
Public bug reported: The Tabs documentation at https://developer.ubuntu.com/api/apps/qml/sdk-15.04.1/Ubuntu.Components.Tabs/ does not mention that the Tabs component and navigation pattern are apparently deprecated, according to https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui- toolkit/+bug/1539759. ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1566735 Title: Tabs documentation does not mention that Tabs are deprecated Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: The Tabs documentation at https://developer.ubuntu.com/api/apps/qml/sdk-15.04.1/Ubuntu.Components.Tabs/ does not mention that the Tabs component and navigation pattern are apparently deprecated, according to https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui- toolkit/+bug/1539759. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1566735/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1490749] Re: Cannot download URIs with a "filesystem:" scheme
I've just tried the same thing in the in-app Twitter browser and it does not download. I do not know whether this is because the webview can't handle it or because the webview handles it fine and then gives the data to the Twitter app itself, which does not know what to do with it. (If you can think of a better way of testing, I'm happy to do so.) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1490749 Title: Cannot download URIs with a "filesystem:" scheme Status in Oxide: New Status in webbrowser-app package in Ubuntu: Confirmed Bug description: Bq aquaris 4.5 15.04 r24 When I try to download images from telegram web version web browser ask me to select an APP . Cant simply downlad, by other hand if I select Gallery, udropcabin or Imaginario i recived this error: Error during downloading NetworkError 301 - Protocol "filesystem" is unknown. To manage notifications about this bug go to: https://bugs.launchpad.net/oxide/+bug/1490749/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1490749] Re: Cannot download URIs with a "filesystem:" scheme
Android Chrome does not have this limitation; photoeditorsdk.com downloads a blob URL (as described in bug #1563035) and the export button works as expected in Chrome on Android; the image is downloaded. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1490749 Title: Cannot download URIs with a "filesystem:" scheme Status in Oxide: New Status in webbrowser-app package in Ubuntu: Confirmed Bug description: Bq aquaris 4.5 15.04 r24 When I try to download images from telegram web version web browser ask me to select an APP . Cant simply downlad, by other hand if I select Gallery, udropcabin or Imaginario i recived this error: Error during downloading NetworkError 301 - Protocol "filesystem" is unknown. To manage notifications about this bug go to: https://bugs.launchpad.net/oxide/+bug/1490749/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1563035] [NEW] Downloading blob: URLs fails
Public bug reported: If I attempt to download a blob: URL from a site, I am presented with a dialog asking to choose an application as destination, and then after choosing I am presented with "NetworkError 301: Protocol 'blob' is unknown". (Replicate by, for example, going to https://www.photoeditorsdk.com/, choosing "Try HTML5 editor", and then hitting Export in the editor.) I think that the browser probably hands off the URL in question to the download manager, which does not understand blob URLs (and should not). The browser should handle this itself; it is the only thing that can understand blob URLs, which may be (and in this case was) dynamically generated and stored in memory only. (If handing off to the download manager is still required, then perhaps the browser should serialise to a file or a data URL and then hand that URL to the DLM.) ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1563035 Title: Downloading blob: URLs fails Status in webbrowser-app package in Ubuntu: New Bug description: If I attempt to download a blob: URL from a site, I am presented with a dialog asking to choose an application as destination, and then after choosing I am presented with "NetworkError 301: Protocol 'blob' is unknown". (Replicate by, for example, going to https://www.photoeditorsdk.com/, choosing "Try HTML5 editor", and then hitting Export in the editor.) I think that the browser probably hands off the URL in question to the download manager, which does not understand blob URLs (and should not). The browser should handle this itself; it is the only thing that can understand blob URLs, which may be (and in this case was) dynamically generated and stored in memory only. (If handing off to the download manager is still required, then perhaps the browser should serialise to a file or a data URL and then hand that URL to the DLM.) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1563035/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1556078] [NEW] Playlist requires QtMultimedia 5.6 but documentation says 5.4
Public bug reported: https://developer.ubuntu.com/api/apps/qml/sdk-15.04.1/QtMultimedia.Playlist/ has this explicit code example: import QtQuick 2.0 import QtMultimedia 5.4 Item { width: 400; height: 300; Audio { id: player; playlist: Playlist { id: playlist PlaylistItem { source: "song1.ogg"; } PlaylistItem { source: "song2.ogg"; } PlaylistItem { source: "song3.ogg"; } } } ... } That doesn't work. Playlist doesn't seem to exist in QtMultimedia 5.4; one must import QtMultimedia 5.6. ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1556078 Title: Playlist requires QtMultimedia 5.6 but documentation says 5.4 Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: https://developer.ubuntu.com/api/apps/qml/sdk-15.04.1/QtMultimedia.Playlist/ has this explicit code example: import QtQuick 2.0 import QtMultimedia 5.4 Item { width: 400; height: 300; Audio { id: player; playlist: Playlist { id: playlist PlaylistItem { source: "song1.ogg"; } PlaylistItem { source: "song2.ogg"; } PlaylistItem { source: "song3.ogg"; } } } ... } That doesn't work. Playlist doesn't seem to exist in QtMultimedia 5.4; one must import QtMultimedia 5.6. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1556078/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1489643] Re: [pay UI] Paypal login cannot be assured to be from paypal
@jdstrand: I may have not explained this ideally. Yes, EV certs will protect us if your router is trying to lie to you about where paypal.com is, but they don't help at all if my app shows something which looks like the trust-store dialog but actually isn't. Users will then type their Ubuntu One password into it, which we don't want them to do, but there's no way of telling whether something that looks like a secure OS- presented dialog actually *is* that secure OS-presented dialog. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1489643 Title: [pay UI] Paypal login cannot be assured to be from paypal Status in Canonical System Image: Confirmed Status in pay-ui: Triaged Status in Ubuntu UX: Triaged Status in webbrowser-app package in Ubuntu: Confirmed Bug description: When paying for an app with Paypal, the Paypal login screen is presented in an Ubuntu wrapper. There is no indication on this page that I'm actually looking at paypal.com rather than being phished or that some bad DNS has pointed me to a wrong site. The padlock in the top corner doesn't indicate anything I'm inclined to believe -- is it showing that the connection is https? Has it verified that I'm really talking to Paypal? How can I know that? This is encouraging people to type their Paypal password into phishing sites. The previous step in the purchase process, where I'm choosing which payment system to use, also displays a padlock, and that hasn't connected to any payment site at all. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1489643/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1474078] Re: Provide a way to disable notifications from calendar events
A combination of 2 and 3 might be useful -- add a .desktop key which apps can set, and if an app doesn't set this key and then does show its first notification, the user is prompted. So app developers are encouraged to set the key (so avoid their users being prompted for whether showing notifications is allowed), but forgetting still maintains the principle that embarrassing apps will not show a first notification unprompted. (I expect that some part of the documentation/askubuntu question ought to be a prominent search engine hit for the search "why does my app ask for permission to show notifications" or similar, too.) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-datetime in Ubuntu. https://bugs.launchpad.net/bugs/1474078 Title: Provide a way to disable notifications from calendar events Status in Canonical System Image: In Progress Status in Ubuntu Calendar App: Fix Committed Status in indicator-datetime package in Ubuntu: In Progress Status in ubuntu-system-settings package in Ubuntu: Invalid Bug description: While I like having the calendar on the phone I do not want an audible notification for the events. Would we simply add the calendar app to the Notifications page? To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1474078/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "ubuntu-location-service-trust-stored.log.1.gz" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458352/+files/ubuntu-location-service-trust-stored.log.1.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "com.ubuntu.location.ubuntu-phablet.invalid-user.log.INFO.20150904-114017.1719" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458357/+files/com.ubuntu.location.ubuntu-phablet.invalid-user.log.INFO.20150904-114017.1719 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
It was suggested that I add logfile /var/log/upstart/ubuntu-espoo- service.log but I don't seem to have that at all. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "com.ubuntu.location.INFO" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458354/+files/com.ubuntu.location.INFO -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "com.ubuntu.location.ERROR" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458353/+files/com.ubuntu.location.ERROR -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "com.ubuntu.location.WARNING" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458355/+files/com.ubuntu.location.WARNING -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "ubuntu-location-service-trust-stored.log" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458351/+files/ubuntu-location-service-trust-stored.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "com.ubuntu.location.ubuntu-phablet.invalid-user.log.ERROR.20150904-101710.3687" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458356/+files/com.ubuntu.location.ubuntu-phablet.invalid-user.log.ERROR.20150904-101710.3687 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] Re: GPS does not work on my Bq E5
** Attachment added: "com.ubuntu.location.ubuntu-phablet.invalid-user.log.ERROR.20150904-101710.3687" https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+attachment/4458358/+files/com.ubuntu.location.ubuntu-phablet.invalid-user.log.ERROR.20150904-101710.3687 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492783] [NEW] GPS does not work on my Bq E5
Public bug reported: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. ** Affects: location-service (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1492783 Title: GPS does not work on my Bq E5 Status in location-service package in Ubuntu: New Bug description: I have a Bq E5 (not an E4.5) and the GPS does not seem to work. The SensorsStatus app shows GPS as returning no results for location (every reading ("Latitude", "Longitude", etc) is shown as a dash, except "Method" which is "Satellite" and "Speed" which is "nan") . I have attached various logfiles in the hope that they will help. I have tried turning off location detection and GPS and turning them back on again, to no avail. I have also tried turning off wifi, to no avail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1492783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1489643] [NEW] Paypal login cannot be assured to be from paypal
Public bug reported: When paying for an app with Paypal, the Paypal login screen is presented in an Ubuntu wrapper. There is no indication on this page that I'm actually looking at paypal.com rather than being phished or that some bad DNS has pointed me to a wrong site. The padlock in the top corner doesn't indicate anything I'm inclined to believe -- is it showing that the connection is https? Has it verified that I'm really talking to Paypal? How can I know that? This is encouraging people to type their Paypal password into phishing sites. The previous step in the purchase process, where I'm choosing which payment system to use, also displays a padlock, and that hasn't connected to any payment site at all. ** Affects: unity-scope-click (Ubuntu) Importance: Undecided Status: New ** Attachment added: ""Paypal" login in Ubuntu wrapper" https://bugs.launchpad.net/bugs/1489643/+attachment/4453547/+files/screenshot20150827_230910161.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1489643 Title: Paypal login cannot be assured to be from paypal Status in unity-scope-click package in Ubuntu: New Bug description: When paying for an app with Paypal, the Paypal login screen is presented in an Ubuntu wrapper. There is no indication on this page that I'm actually looking at paypal.com rather than being phished or that some bad DNS has pointed me to a wrong site. The padlock in the top corner doesn't indicate anything I'm inclined to believe -- is it showing that the connection is https? Has it verified that I'm really talking to Paypal? How can I know that? This is encouraging people to type their Paypal password into phishing sites. The previous step in the purchase process, where I'm choosing which payment system to use, also displays a padlock, and that hasn't connected to any payment site at all. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1489643/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1489642] Re: With only one payment method available, app purchase dropdown seems to do nothing
** Attachment added: "screenshot 2" https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1489642/+attachment/4453546/+files/screenshot20150827_230837710.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1489642 Title: With only one payment method available, app purchase dropdown seems to do nothing Status in unity-scope-click package in Ubuntu: New Bug description: When paying for an app from the store, if there is only one payment method available (for example, Paypal), then the "dropdown" of payment methods does not actually drop down in any way. Instead, all that happens is that the "this drops down" chevron on the right hand side (see attached screenshot 1) changes to a tick mark (screenshot 2). This change is almost imperceptible, and I had to do it two or three times before I understood what was going on. If there is only one option for payment, perhaps it should not be presented as a drop down list, or perhaps drop down lists should do something more obvious to indicate that they're working when they are tapped? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1489642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1489642] [NEW] With only one payment method available, app purchase dropdown seems to do nothing
Public bug reported: When paying for an app from the store, if there is only one payment method available (for example, Paypal), then the "dropdown" of payment methods does not actually drop down in any way. Instead, all that happens is that the "this drops down" chevron on the right hand side (see attached screenshot 1) changes to a tick mark (screenshot 2). This change is almost imperceptible, and I had to do it two or three times before I understood what was going on. If there is only one option for payment, perhaps it should not be presented as a drop down list, or perhaps drop down lists should do something more obvious to indicate that they're working when they are tapped? ** Affects: unity-scope-click (Ubuntu) Importance: Undecided Status: New ** Attachment added: "screenshot 1" https://bugs.launchpad.net/bugs/1489642/+attachment/4453545/+files/screenshot20150827_230833324.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1489642 Title: With only one payment method available, app purchase dropdown seems to do nothing Status in unity-scope-click package in Ubuntu: New Bug description: When paying for an app from the store, if there is only one payment method available (for example, Paypal), then the "dropdown" of payment methods does not actually drop down in any way. Instead, all that happens is that the "this drops down" chevron on the right hand side (see attached screenshot 1) changes to a tick mark (screenshot 2). This change is almost imperceptible, and I had to do it two or three times before I understood what was going on. If there is only one option for payment, perhaps it should not be presented as a drop down list, or perhaps drop down lists should do something more obvious to indicate that they're working when they are tapped? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1489642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1489395] [NEW] Single star means "this number is the rating", but looks like app has a low rating
Public bug reported: App ratings are displayed as ☆ 4.5. Every time I glance at an app's rating my first thought is that it's been rated low, because it's only got one star. Then I read the number and realise that the app is rated highly and that star means "here is the rating", not "it's got a one- star rating". As far as I can tell everywhere a star rating is displayed it's on a line on its own, so there ought to be room to write ☆ 4.5 (nine characters) -- there is room to fit the developer name horizontally, or the app name -- and this would avoid the confusion. ** Affects: unity-scope-click (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1489395 Title: Single star means "this number is the rating", but looks like app has a low rating Status in unity-scope-click package in Ubuntu: New Bug description: App ratings are displayed as ☆ 4.5. Every time I glance at an app's rating my first thought is that it's been rated low, because it's only got one star. Then I read the number and realise that the app is rated highly and that star means "here is the rating", not "it's got a one- star rating". As far as I can tell everywhere a star rating is displayed it's on a line on its own, so there ought to be room to write ☆ 4.5 (nine characters) -- there is room to fit the developer name horizontally, or the app name -- and this would avoid the confusion. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1489395/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1478075] Re: Sound indicator should only indicate ringtone volume
(Additional: perhaps app event sounds should obey the ringer volume, not the media volume? This is unlikely to be a good approach and carries with it its own confusion; it becomes impossible to silence a game without also silencing the ringer, which is not good.) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1478075 Title: Sound indicator should only indicate ringtone volume Status in Canonical System Image: New Status in Ubuntu UX: Incomplete Status in indicator-sound package in Ubuntu: Incomplete Bug description: On the phone, the volume indicator follows the current active stream volume (music, alarm etc.) to show and control via slider and/or volume buttons. The indicator icon and slider should only ever follow the ringtone volume. I'm not sure whether volume buttons should work for alarms. This is somewhat related to bug #1291458. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20150508-0ubuntu1 Uname: Linux 3.4.67 armv7l ActionStates: ({'mediaplayer-app.desktop.greeter': (true, signature '', [<{'running': , 'state': <'Paused'>}>]), 'mute': (true, '', []), 'phone-settings': (true, '', []), 'mic-volume': (true, '', [<1.0>]), 'scroll': (true, 'i', []), 'high-volume': (true, '', []), 'play-playlist.mediaplayer-app.desktop': (true, 's', []), 'desktop-settings': (true, '', []), 'mediaplayer-app.desktop': (true, '', [<{'running': , 'state': <'Paused'>}>]), 'play.mediaplayer-app.desktop': (true, '', [<'Paused'>]), 'volume': (true, 'i', [<0.7414398193359375>]), 'next.mediaplayer-app.desktop': (true, '', []), 'indicator-shown': (true, '', []), 'root': (true, '', [<{'title': <'Dźwięk'>, 'accessible-desc': <'Głośność (74%)'>, 'icon': <('themed', <['audio-volume-high-panel', 'audio-volume-high', 'audio-volume', 'audio']>)>, 'visible': }>]), 'silent-mode': (true, '', []), 'previous.mediaplayer-app.desktop': (true, '', [])},) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: armhf Date: Fri Jul 24 18:07:15 2015 InstallationDate: Installed on 2015-07-23 (1 days ago) InstallationMedia: Ubuntu 15.04 - armhf (20150723-020304) SourcePackage: indicator-sound UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1478075/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1478075] Re: Sound indicator should only indicate ringtone volume
"It's true that with the current UI you can't change the ringtone volume while media is playing. But there's still no explanation here of why that would actually be a problem" An additional piece of information which may weigh into this discussion (I propose no solutions here) is that of apps and games which play sounds but do not play constant music. This may be because they are capable of playing background music but the user has switched it off, or that the app is not a game but uses sounds for various events. In such a situation, it is often very difficult to decrease the sound volume of the game. If the current foreground app is, for example, a game which plays sounds for events but does not have background music, then it's very unclear what using the hardware volume keys is *expected* to do in this situation. Application sounds obey the media volume setting, not the ringer volume setting (and I assume for this discussion that they will continue to do so, although see below). If the hardware volume keys are used when such a game is the current app, should they adjust the media volume? The phone is not currently playing any media, and there is no obvious direct feedback to be heard when the media volume adjusts (unlike, for example, the music app, where a media volume change is immediately apparent). But if the hardware volume keys adjust the ringer volume when there is no media *playing*, then it becomes effectively impossible to decrease the volume of the game's event sounds. Android and iOS both suffer from this issue, and it is I think at least partially because there are at least two independent volume settings (media and ringer) but they are presented as one context-dependent setting. Maybe separating out the two settings and making them independently adjustable would help alleviate this confusion (at the cost of additional complexity)? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1478075 Title: Sound indicator should only indicate ringtone volume Status in Canonical System Image: New Status in Ubuntu UX: Incomplete Status in indicator-sound package in Ubuntu: Incomplete Bug description: On the phone, the volume indicator follows the current active stream volume (music, alarm etc.) to show and control via slider and/or volume buttons. The indicator icon and slider should only ever follow the ringtone volume. I'm not sure whether volume buttons should work for alarms. This is somewhat related to bug #1291458. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20150508-0ubuntu1 Uname: Linux 3.4.67 armv7l ActionStates: ({'mediaplayer-app.desktop.greeter': (true, signature '', [<{'running': , 'state': <'Paused'>}>]), 'mute': (true, '', []), 'phone-settings': (true, '', []), 'mic-volume': (true, '', [<1.0>]), 'scroll': (true, 'i', []), 'high-volume': (true, '', []), 'play-playlist.mediaplayer-app.desktop': (true, 's', []), 'desktop-settings': (true, '', []), 'mediaplayer-app.desktop': (true, '', [<{'running': , 'state': <'Paused'>}>]), 'play.mediaplayer-app.desktop': (true, '', [<'Paused'>]), 'volume': (true, 'i', [<0.7414398193359375>]), 'next.mediaplayer-app.desktop': (true, '', []), 'indicator-shown': (true, '', []), 'root': (true, '', [<{'title': <'Dźwięk'>, 'accessible-desc': <'Głośność (74%)'>, 'icon': <('themed', <['audio-volume-high-panel', 'audio-volume-high', 'audio-volume', 'audio']>)>, 'visible': }>]), 'silent-mode': (true, '', []), 'previous.mediaplayer-app.desktop': (true, '', [])},) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: armhf Date: Fri Jul 24 18:07:15 2015 InstallationDate: Installed on 2015-07-23 (1 days ago) InstallationMedia: Ubuntu 15.04 - armhf (20150723-020304) SourcePackage: indicator-sound UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1478075/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1480726] [NEW] All Alarm{}s show in all apps and no extra data can be stored
Public bug reported: There is only one database of Alarms in the phone. This means that every app which has anything to do with Alarms (or which wants to set a timer for anything at all) shows all the Alarms set in the phone, from every other Alarm-using app. So if my app creates a countdown timer for an event two weeks from now, that event will also show in the Clock app, and vice versa. Similarly, if my app creates an Alarm with a custom sound in it, the Clock app cannot resolve that sound's URL to a name and so does not know what to show. An app cannot store any custom data at all about an Alarm in order to enable this filtering to only the alarms that it created. I propose two new properties be added to an Alarm object: 8< Properties creator : string data : string Property Documentation creator : string The property holds the applicationName of the app which created this Alarm. This should be set automatically by the QML Alarm object, and so should be read-only to apps. data : string The property holds a string, which can be used by the app to store arbitrary data with the Alarm in any format it chooses. 8< An app can then choose to show all Alarms in the system (by acting as it does now and using the AlarmModel object), or can optionally filter to just its own alarms thus: SortFilterModel { model: AlarmModel {} filter.property: "creator" filter.pattern: new RegExp("^" + main.applicationName + "$") } If apps being able to see another app's Alarms is considered a privacy leak, then AlarmModel can be changed to act thus and so each app *only* sees its own Alarms. ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Status: Confirmed ** Description changed: There is only one database of Alarms in the phone. This means that every app which has anything to do with Alarms (or which wants to set a timer for anything at all) shows all the Alarms set in the phone, from every other Alarm-using app. So if my app creates a countdown timer for an event two weeks from now, that event will also show in the Clock app, and vice versa. Similarly, if my app creates an Alarm with a custom sound in it, the Clock app cannot resolve that sound's URL to a name and so does not know what to show. An app cannot store any custom data at all about an Alarm in order to enable this filtering to only the alarms that it created. I propose two new properties be added to an Alarm object: 8< Properties - owner : string + creator : string data : string Property Documentation creator : string The property holds the applicationName of the app which created this Alarm. This should be set automatically by the QML Alarm object, and so should be read-only to apps. data : string The property holds a string, which can be used by the app to store arbitrary data with the Alarm in any format it chooses. 8< An app can then choose to show all Alarms in the system (by acting as it does now and using the AlarmModel object), or can optionally filter to just its own alarms thus: SortFilterModel { - model: AlarmModel {} - filter.property: "creator" - filter.pattern: new RegExp("^" + main.applicationName + "$") + model: AlarmModel {} + filter.property: "creator" + filter.pattern: new RegExp("^" + main.applicationName + "$") } If apps being able to see another app's Alarms is considered a privacy leak, then AlarmModel can be changed to act thus and so each app *only* sees its own Alarms. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1480726 Title: All Alarm{}s show in all apps and no extra data can be stored Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Bug description: There is only one database of Alarms in the phone. This means that every app which has anything to do with Alarms (or which wants to set a timer for anything at all) shows all the Alarms set in the phone, from every other Alarm-using app. So if my app creates a countdown timer for an event two weeks from now, that event will also show in the Clock app, and vice versa. Similarly, if my app creates an Alarm with a custom sound in it, the Clock app cannot resolve that sound's URL to a name and so does not know what to show. An app cannot store any custom data at all about an Alarm in order to enable this filtering to only the alarms that it created. I propose two new properties be added to an Alarm object: 8< Properties creator : string data : string Property Documentation creator : string The property holds the applicationName of the app which created this Alarm. This should be set automatically by the QML Alarm object,
[Touch-packages] [Bug 1452416] [NEW] Provide a reliable entry point for inserting third party components
Public bug reported: UCS (and other third party component archives) needs a way to download the source code of a component and add it to the current project's build system. This suggests that the qmake build templates for Ubuntu SDK projects need some sort of a "hook" or identifiable entry point so that ucs knows where to add new components to. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-sdk 1.126.1 ProcVersionSignature: Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17 Uname: Linux 3.13.0-49-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 CurrentDesktop: Unity Date: Wed May 6 20:01:57 2015 InstallationDate: Installed on 2014-04-07 (394 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: ubuntu-touch-meta UpgradeStatus: Upgraded to trusty on 2014-04-25 (376 days ago) ** Affects: qtcreator-plugin-ubuntu (Ubuntu) Importance: High Status: Confirmed ** Tags: amd64 apport-bug third-party-packages trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-touch-meta in Ubuntu. https://bugs.launchpad.net/bugs/1452416 Title: Provide a reliable entry point for inserting third party components Status in qtcreator-plugin-ubuntu package in Ubuntu: Confirmed Bug description: UCS (and other third party component archives) needs a way to download the source code of a component and add it to the current project's build system. This suggests that the qmake build templates for Ubuntu SDK projects need some sort of a "hook" or identifiable entry point so that ucs knows where to add new components to. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-sdk 1.126.1 ProcVersionSignature: Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17 Uname: Linux 3.13.0-49-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 CurrentDesktop: Unity Date: Wed May 6 20:01:57 2015 InstallationDate: Installed on 2014-04-07 (394 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: ubuntu-touch-meta UpgradeStatus: Upgraded to trusty on 2014-04-25 (376 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtcreator-plugin-ubuntu/+bug/1452416/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1436630] Re: must unlock screen even if it was only off for a few seconds
Daniel, the setting "System > Security & Privacy > Lock phone > Lock when idle" sets how long the phone will wait, if left untouched, before locking the screen. I currently have it set to 1 minute. However, if I press the power button to turn off the screen, and then immediately press the power button to turn the screen back on again, I must enter my PIN again; this is not controlled by the above setting. At the moment, the phone basically locks every time the screen is turned off, and as far as I can tell I can't change that without completely disabling locking. What I'd like (and what I believe Selene is requesting) is that "turn off the screen" does not always mean "and lock the screen". -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1436630 Title: must unlock screen even if it was only off for a few seconds Status in ubuntu-system-settings package in Ubuntu: Triaged Status in unity8 package in Ubuntu: Incomplete Bug description: On Ubuntu Touch so far (vivid, mid-March 2015), it is still necessary to unlock the screen after it shuts off, even if the screen was only off for a few seconds. This is inconvenient, and it would be much easier if the lock didn't activate for ~10 seconds after the screen turns itself off. If the user activates the screen-off event by tapping the power button, then it's okay to lock immediately. If the screen times out though, it should probably delay before locking, to give the user a chance to turn the screen back on. Could we add a ~10 second delay between automatic screen shutoff and screen lock? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-system-settings/+bug/1436630/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1370008] Re: url-dispatcher-bad-url
In general there should probably be fallback handling in the URL dispatcher for all unknown URL schemata, I think? (Although having a dedicated handler for market: URLs may also be useful.) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1370008 Title: url-dispatcher-bad-url Status in Ubuntu UX bugs: Triaged Status in gallery-app package in Ubuntu: Invalid Status in webbrowser-app package in Ubuntu: Confirmed Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding gallery-app. This problem was most recently seen with version 13.10.0+14.10.20140908.1-0ubuntu1, the problem page at https://errors.ubuntu.com/problem/b1f16000af092461aeb85b5c7edfd3dc3f1271c8 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1370008/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1413121] Re: MainView is missing an API to lock to landscape
Also, I always lock my phone's rotation so that it's always portrait only. A "lock to landscape" API for a game should override this, for that game only. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1413121 Title: MainView is missing an API to lock to landscape Status in Qt integration with the Mir display server: Confirmed Status in QT Ubuntu: New Status in qtmir package in Ubuntu: New Status in qtubuntu package in Ubuntu: New Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: The MainView offers an api to lock the app to portrait. For games however, it's common to require landscape mode. This is not supported and causes most of the games to show a notice like "Please rotate the device" when in portrait mode which looks not very professional. To manage notifications about this bug go to: https://bugs.launchpad.net/qtmir/+bug/1413121/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1404540] [NEW] Scrollbar is basically invisible on dark coloured backgrounds
Public bug reported: See attached image. Obviously a scrollbar should be unobtrusive on a mobile platform, but this isn't unobtrusive, it's invisible. I had to look very very hard to be sure it was even there at all. This surely can't be the design goal; if so, why have a scrollbar at all? ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Status: Confirmed ** Attachment added: "invisible-ubuntu-sdk-scrollbar.png" https://bugs.launchpad.net/bugs/1404540/+attachment/4284803/+files/invisible-ubuntu-sdk-scrollbar.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1404540 Title: Scrollbar is basically invisible on dark coloured backgrounds Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Bug description: See attached image. Obviously a scrollbar should be unobtrusive on a mobile platform, but this isn't unobtrusive, it's invisible. I had to look very very hard to be sure it was even there at all. This surely can't be the design goal; if so, why have a scrollbar at all? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1404540/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1365733] Re: unity8-dash keeps trying to start but never does
There doesn't seem to be anything useful in unity8-dash.log. I've pasted mine below (this is after I restarted unity8-dash, and is in an newly created x86 emulator). phablet@ubuntu-phablet:~$ cat ~/.cache/upstart/unity8-dash.log file:///usr/share/unity8/Dash/Dash.qml:278: ReferenceError: scopeStyle is not defined UbuntuWindow - regular geometry file:///usr/share/unity8/Dash/Dash.qml:278: ReferenceError: scopeStyle is not defined User agent string: "scopes-api=0.6.7+14.10.20141014-0ubuntu1&plugin=0.5.4+14.10.20141015-0ubuntu1&unity8=8.01+15.04.20141030~rtm-0ubuntu1&release=14.10&build=5" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" Pre-populating scope "musicaggregator" Pre-populating scope "videoaggregator" file:///usr/share/unity8/Dash/CardTool.qml:179:38: Unable to assign [undefined] to bool file:///usr/share/unity8/Dash/CardTool.qml:179:38: Unable to assign [undefined] to bool file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:56:44: QML CroppedImageMinimumSourceSize: Error downloading http://images.gs-cdn.net/static/albums/500_9604196.jpg - server replied: Not Found file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:56:44: QML CroppedImageMinimumSourceSize: Error downloading http://images.gs-cdn.net/static/albums/500_9759153.jpg - server replied: Not Found file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:56:44: QML CroppedImageMinimumSourceSize: Error downloading http://images.gs-cdn.net/static/albums/500_9753883.jpg - server replied: Not Found file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:56:44: QML CroppedImageMinimumSourceSize: Error downloading http://images.gs-cdn.net/static/albums/500_9604196.jpg - server replied: Not Found file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:56:44: QML CroppedImageMinimumSourceSize: Error downloading http://images.gs-cdn.net/static/albums/500_9759153.jpg - server replied: Not Found file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:56:44: QML CroppedImageMinimumSourceSize: Error downloading http://images.gs-cdn.net/static/albums/500_9753883.jpg - server replied: Not Found file:///usr/share/unity8/Dash/CardTool.qml:179:38: Unable to assign [undefined] to bool file:///usr/share/unity8/Dash/CardTool.qml:179:38: Unable to assign [undefined] to bool file:///usr/share/unity8/Dash/CardTool.qml:179:38: Unable to assign [undefined] to bool file:///usr/share/unity8/Dash/CardTool.qml:179:38: Unable to assign [undefined] to bool file:///usr/share/unity8/Dash/Dash.qml:278: ReferenceError: scopeStyle is not defined UbuntuWindow - regular geometry file:///usr/share/unity8/Dash/Dash.qml:278: ReferenceError: scopeStyle is not defined UbuntuWindow::handleSurfaceFocusChange(focused=true) UbuntuWindow::handleSurfaceResize(width=480, height=768) UbuntuWindow::handleSurfaceFocusChange(focused=false) UbuntuWindow::handleSurfaceFocusChange(focused=true) UbuntuClipboard - Got invalid serialized mime data. Ignoring it. User agent string: "scopes-api=0.6.7+14.10.20141014-0ubuntu1&plugin=0.5.4+14.10.20141015-0ubuntu1&unity8=8.01+15.04.20141030~rtm-0ubuntu1&release=14.10&build=5" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" file:///usr/lib/i386-linux-gnu/unity8/qml/Dash/createCardComponent:8:1: QML AbstractButton: Binding loop detected for property "implicitWidth" Pre-populating scope "musicaggregator" Pre-populating scope "videoaggregator" file:///usr/share/unity8/Dash/CardTool.qml:179:38: Una
[Touch-packages] [Bug 1388177] Re: Scope sends me off to Online Accounts to sign in with U1, never returns
Ah, once the emulator is running, I can ssh into it. $ dpkg -l | grep unity-scope-click ii unity-scope-click 0.1.1+14.10.20140915-0ubuntu1 i386 Click Packages Scope for Unity ii unity-scope-click-departmentsdb 0.1.1+14.10.20140915-0ubuntu1 all Click Scope Departments Database -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1388177 Title: Scope sends me off to Online Accounts to sign in with U1, never returns Status in “unity-scope-click” package in Ubuntu: Incomplete Bug description: When I first use the click scope to search for and install an app on the phone, I need to sign in with Ubuntu One. Once I have so signed in, I'm left looking at the System Settings screen rather than continuing with installation of the app I chose. Worse, if I then return to the Dash, it has reset and I have to search and find the app again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1388177/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1388177] Re: Scope sends me off to Online Accounts to sign in with U1, never returns
How do I work out which version of the deb is installed in the image? Ubuntu SDK > Devices > emulator says "Ubuntu version: 20140917", "Image version: 243". I'm happy to upgrade it, but I'm not sure how from Ubuntu SDK! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1388177 Title: Scope sends me off to Online Accounts to sign in with U1, never returns Status in “unity-scope-click” package in Ubuntu: Incomplete Bug description: When I first use the click scope to search for and install an app on the phone, I need to sign in with Ubuntu One. Once I have so signed in, I'm left looking at the System Settings screen rather than continuing with installation of the app I chose. Worse, if I then return to the Dash, it has reset and I have to search and find the app again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1388177/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1388177] Re: Scope sends me off to Online Accounts to sign in with U1, never returns
I'm using the emulator. Installed yesterday. System Settings says it's Ubuntu 14.10 (r243). ** Changed in: unity-scope-click (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1388177 Title: Scope sends me off to Online Accounts to sign in with U1, never returns Status in “unity-scope-click” package in Ubuntu: New Bug description: When I first use the click scope to search for and install an app on the phone, I need to sign in with Ubuntu One. Once I have so signed in, I'm left looking at the System Settings screen rather than continuing with installation of the app I chose. Worse, if I then return to the Dash, it has reset and I have to search and find the app again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1388177/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1388179] [NEW] After installing a new app, there's no obvious way to launch it
Public bug reported: When I install an app on the phone, the scope updates to have an Open and Uninstall button, but if I've left the Dash in the interim (and so can't use that button) then the app I've just installed does not appear anywhere obvious. Perhaps the "All" scope on the home of the dash should include recently installed apps, or they should be pinned to the launcher as they are on Ubuntu desktop? ** Affects: unity-scope-click (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1388179 Title: After installing a new app, there's no obvious way to launch it Status in “unity-scope-click” package in Ubuntu: New Bug description: When I install an app on the phone, the scope updates to have an Open and Uninstall button, but if I've left the Dash in the interim (and so can't use that button) then the app I've just installed does not appear anywhere obvious. Perhaps the "All" scope on the home of the dash should include recently installed apps, or they should be pinned to the launcher as they are on Ubuntu desktop? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1388179/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1388177] [NEW] Scope sends me off to Online Accounts to sign in with U1, never returns
Public bug reported: When I first use the click scope to search for and install an app on the phone, I need to sign in with Ubuntu One. Once I have so signed in, I'm left looking at the System Settings screen rather than continuing with installation of the app I chose. Worse, if I then return to the Dash, it has reset and I have to search and find the app again. ** Affects: unity-scope-click (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1388177 Title: Scope sends me off to Online Accounts to sign in with U1, never returns Status in “unity-scope-click” package in Ubuntu: New Bug description: When I first use the click scope to search for and install an app on the phone, I need to sign in with Ubuntu One. Once I have so signed in, I'm left looking at the System Settings screen rather than continuing with installation of the app I chose. Worse, if I then return to the Dash, it has reset and I have to search and find the app again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1388177/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1354164] [NEW] No way to show power indicator for wireless mice/keyboards on desktop machines without battery
Public bug reported: I have a desktop computer running Ubuntu 14.04. Today I discovered that the battery status for my wireless mouse and keyboard are shown in the Power section of System Settings, which was very pleasing. However, there is no way to show the battery status in the menu bar on this machine. The options available for this in System Settings are: Show battery status in the menu bar when battery is present Show battery status in the menu bar when battery is charging/in use Show battery status in the menu bar never Either the batteries in my wireless keyboard and wireless mouse count as a "battery" for the purposes of this menu, or they don't, and I don't know which is true, but either way there is a bug. If the "Show battery status in the menu bar" dropdown menu applies to only a main computer battery (such as is found in a laptop) then there is no way to show the battery status of my wireless keyboard and mouse if my computer does not *have* a main computer battery (because it is a desktop computer plugged into mains power always). Suggested fix: add a new option, "when device(s) using a battery are connected", which would act as "Show battery status in the menu bar when battery is present" but also show the status in the menu bar if battery-using peripherals are connected. If the "Show battery status in the menu bar" dropdown menu applies to all batteries, including those in peripherals such as mice, then the setting is incorrectly being ignored because I do not have a power indicator. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: indicator-power 12.10.6+14.04.20140411-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CurrentDesktop: Unity Date: Thu Aug 7 21:53:35 2014 InstallationDate: Installed on 2014-04-07 (122 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: indicator-power UpgradeStatus: Upgraded to trusty on 2014-04-25 (104 days ago) ** Affects: indicator-power (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-power in Ubuntu. https://bugs.launchpad.net/bugs/1354164 Title: No way to show power indicator for wireless mice/keyboards on desktop machines without battery Status in “indicator-power” package in Ubuntu: New Bug description: I have a desktop computer running Ubuntu 14.04. Today I discovered that the battery status for my wireless mouse and keyboard are shown in the Power section of System Settings, which was very pleasing. However, there is no way to show the battery status in the menu bar on this machine. The options available for this in System Settings are: Show battery status in the menu bar when battery is present Show battery status in the menu bar when battery is charging/in use Show battery status in the menu bar never Either the batteries in my wireless keyboard and wireless mouse count as a "battery" for the purposes of this menu, or they don't, and I don't know which is true, but either way there is a bug. If the "Show battery status in the menu bar" dropdown menu applies to only a main computer battery (such as is found in a laptop) then there is no way to show the battery status of my wireless keyboard and mouse if my computer does not *have* a main computer battery (because it is a desktop computer plugged into mains power always). Suggested fix: add a new option, "when device(s) using a battery are connected", which would act as "Show battery status in the menu bar when battery is present" but also show the status in the menu bar if battery-using peripherals are connected. If the "Show battery status in the menu bar" dropdown menu applies to all batteries, including those in peripherals such as mice, then the setting is incorrectly being ignored because I do not have a power indicator. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: indicator-power 12.10.6+14.04.20140411-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CurrentDesktop: Unity Date: Thu Aug 7 21:53:35 2014 InstallationDate: Installed on 2014-04-07 (122 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: indicator-power UpgradeStatus: Upgraded to trusty on 2014-04-25 (104 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1354164/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.la
[Touch-packages] [Bug 1352000] [NEW] Screen repeatedly goes black, returns to normal after a couple of seconds
Public bug reported: Running 14.04. My screen (an external monitor, connected to a desktop computer) has started going black and then returning back to normal a couple of seconds later. This happens every few minutes. dmesg shows lines: [ 9241.255109] HDMI: ELD buf size is 0, force 128 [ 9241.255132] HDMI: invalid ELD data byte 0 There does not seem to be anything relevant being added to Xorg.0.log. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sun Aug 3 22:00:36 2014 DistUpgraded: 2014-04-25 18:09:11,162 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8534] InstallationDate: Installed on 2014-04-07 (118 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: ASUS All Series ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=ad1b3110-ee9a-4dac-839d-604080e0020d ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to trusty on 2014-04-25 (100 days ago) dmi.bios.date: 12/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1707 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: PCS dmi.chassis.type: 3 dmi.chassis.vendor: PC SPECIALIST dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1707:bd12/13/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ87-A:rvrRev1.xx:cvnPCSPECIALIST:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sun Aug 3 19:24:59 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 10147 vendor ACI xserver.version: 2:1.15.1-0ubuntu2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 trusty ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1352000 Title: Screen repeatedly goes black, returns to normal after a couple of seconds Status in “xorg” package in Ubuntu: New Bug description: Running 14.04. My screen (an external monitor, connected to a desktop computer) has started going black and then returning back to normal a couple of seconds later. This happens every few minutes. dmesg shows lines: [ 9241.255109] HDMI: ELD buf size is 0, force 128 [ 9241.255132] HDMI: invalid ELD data byte 0 There does not seem to be anything relevant being added to Xorg.0.log. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sun Aug 3 22:00:36 2014 DistUpgraded: 2014-04-25 18:09:11,162 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])