[Touch-packages] [Bug 551637] Re: debconf seems to require a controlling TTY even when no interaction is required
I just tried the command in the opening "comment" again and indeed it now works. (the machine was reinstalled since 2010 and didn't get NTP until just now). P.S. Feel free to mark it as "fixed" ! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to debconf in Ubuntu. https://bugs.launchpad.net/bugs/551637 Title: debconf seems to require a controlling TTY even when no interaction is required Status in debconf package in Ubuntu: Invalid Bug description: Binary package hint: debconf Having installed NTP on a very similar workstation I expected no interaction, so I typed: % ssh root@falbala apt-get install ntp Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: linux-headers-2.6.32-16-generic linux-headers-2.6.32-16 Use 'apt-get autoremove' to remove them. Suggested packages: ntp-doc The following NEW packages will be installed: ntp 0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded. Need to get 559kB of archives. After this operation, 1,450kB of additional disk space will be used. Get:1 http://nl.archive.ubuntu.com/ubuntu/ lucid/main ntp 1:4.2.4p8+dfsg-1ubuntu 1 [559kB] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 559kB in 1s (412kB/s) Selecting previously deselected package ntp. (Reading database ... E: Sub-process /usr/bin/dpkg received a segmentation fault . Of course adding "-t" on the ssh commandline works: assurancetourix:~> ssh -t root@falbala apt-get install ntp Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: linux-headers-2.6.32-16-generic linux-headers-2.6.32-16 Use 'apt-get autoremove' to remove them. Suggested packages: ntp-doc The following NEW packages will be installed: ntp 0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded. Need to get 0B/559kB of archives. After this operation, 1,450kB of additional disk space will be used. Selecting previously deselected package ntp. (Reading database ... 143304 files and directories currently installed.) Unpacking ntp (from .../ntp_1%3a4.2.4p8+dfsg-1ubuntu1_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up ntp (1:4.2.4p8+dfsg-1ubuntu1) ... * Starting NTP server ntpd [ OK ] Connection to falbala closed. --- but I don't think that debconf should complain/fail and cause dpkg to crash if it doesn't need to ask me anything. Ubuntu Lucid. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debconf/+bug/551637/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1977507] [NEW] Cupsd crashes every other job.
Public bug reported: After yesterdays upgrade (apt log attached) cupsd has stared to crash again every other job. It is then restarted and the next job prints fine. This situation I recognize from the past. It's been like this for a while in the past. Back then I didn't know the upgrade that caused it as half the time it would print just fine. I tried filing a bug with "ubuntu-bug" on the fileserver, but the firefox that was started to let me file the bug wasn't able to get me logged into launchpad. (Works like a charm on my desktop google-chrome). These packages were upgraded yesterday: Start-Date: 2022-06-01 17:55:34 Commandline: apt-get dist-upgrade Requested-By: wolff (1000) Upgrade: libcups2:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), libkmod2:amd64 (27-1ubuntu2, 27-1ubuntu2.1), libcups2-dev:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), libcupsimage2-dev:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-server-common:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-common:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2-data:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), kmod:amd64 (27-1ubuntu2, 27-1ubuntu2.1), cups-ppdc:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2-bin:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3, 2.3.1-9ubuntu1.2), apache2-bin:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), cups-bsd:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-core-drivers:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-daemon:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), libcupsimage2:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), cups:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2-utils:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), cups-client:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-ipp-utils:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2) End-Date: 2022-06-01 17:56:15 ** Affects: cups (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1977507 Title: Cupsd crashes every other job. Status in cups package in Ubuntu: New Bug description: After yesterdays upgrade (apt log attached) cupsd has stared to crash again every other job. It is then restarted and the next job prints fine. This situation I recognize from the past. It's been like this for a while in the past. Back then I didn't know the upgrade that caused it as half the time it would print just fine. I tried filing a bug with "ubuntu-bug" on the fileserver, but the firefox that was started to let me file the bug wasn't able to get me logged into launchpad. (Works like a charm on my desktop google- chrome). These packages were upgraded yesterday: Start-Date: 2022-06-01 17:55:34 Commandline: apt-get dist-upgrade Requested-By: wolff (1000) Upgrade: libcups2:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), libkmod2:amd64 (27-1ubuntu2, 27-1ubuntu2.1), libcups2-dev:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), libcupsimage2-dev:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-server-common:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-common:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2-data:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), kmod:amd64 (27-1ubuntu2, 27-1ubuntu2.1), cups-ppdc:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2-bin:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3, 2.3.1-9ubuntu1.2), apache2-bin:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), cups-bsd:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-core-drivers:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-daemon:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), libcupsimage2:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), cups:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), apache2-utils:amd64 (2.4.41-4ubuntu3.10, 2.4.41-4ubuntu3.11), cups-client:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2), cups-ipp-utils:amd64 (2.3.1-9ubuntu1.1, 2.3.1-9ubuntu1.2) End-Date: 2022-06-01 17:56:15 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1977507/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1909297] Re: cups missing write permission (for sendmessage operation) in apparmor
Hi, I got fed up and figured out how to configure apparmor to allow it. I added # *** Added by rew. /run/systemd/notify rw, near line 108 of /etc/apparmor.d/usr.sbin.cupsd That solves it. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1909297 Title: cups missing write permission (for sendmessage operation) in apparmor Status in cups package in Ubuntu: Confirmed Bug description: After updating recent version of cups (2.3.3op1-3ubuntu1) : I have started to get errors about its missing permissions on journal audit[29527]: AVC apparmor="DENIED" operation="sendmsg" profile="/usr/sbin/cupsd" name="/run/systemd/notify" pid=29527 comm="cupsd" requested_mask="w" denied_mask="w" fsuid=0 ouid=0 kernel: audit: type=1400 audit(1608880333.084:56): apparmor="DENIED" operation="sendmsg" profile="/usr/sbin/cupsd" name="/run/systemd/notify" pid=29527 comm="cupsd" requested_mask="w" denied_mask="w" fsuid=0 ouid=0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu55 Architecture: amd64 CasperMD5CheckResult: skip CupsErrorLog: E [25/Dec/2020:10:11:15 +0300] [CGI] ippfind (PID 12144) stopped with status 1! CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.04 InstallationDate: Installed on 2020-12-25 (0 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20201224) KernLog: Lpstat: Error: command ['lpstat', '-v'] failed with exit code 1: lpstat: No destinations added. MachineType: LENOVO INVALID NonfreeKernelModules: nvidia_modeset nvidia Package: cups 2.3.3op1-3ubuntu1 PackageArchitecture: amd64 Papersize: a4 ProcCmdline: BOOT_IMAGE=/@/boot/vmlinuz-5.8.0-34-generic root=UUID=b42aef37-b541-43bb-bef8-2dcb8f34df09 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-5.8.0-34-generic root=UUID=b42aef37-b541-43bb-bef8-2dcb8f34df09 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.8.0-34.37+21.04.1-generic 5.8.18 Tags: hirsute package-from-proposed Uname: Linux 5.8.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/11/2019 dmi.bios.release: 1.45 dmi.bios.vendor: LENOVO dmi.bios.version: 4KCN45WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: VIUU4 dmi.board.vendor: LENOVO dmi.board.version: NO DPK dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: INVALID dmi.ec.firmware.release: 1.45 dmi.modalias: dmi:bvnLENOVO:bvr4KCN45WW:bd01/11/2019:br1.45:efr1.45:svnLENOVO:pnINVALID:pvrINVALID:rvnLENOVO:rnVIUU4:rvrNODPK:cvnLENOVO:ct10:cvrINVALID: dmi.product.family: IDEAPAD dmi.product.name: INVALID dmi.product.sku: LENOVO_BI_IDEAPAD4K_BU_idea_FM_ dmi.product.version: INVALID dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1909297/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1909297] Re: cups missing write permission (for sendmessage operation) in apparmor
Soo any progress about this in 6 months? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1909297 Title: cups missing write permission (for sendmessage operation) in apparmor Status in cups package in Ubuntu: Confirmed Bug description: After updating recent version of cups (2.3.3op1-3ubuntu1) : I have started to get errors about its missing permissions on journal audit[29527]: AVC apparmor="DENIED" operation="sendmsg" profile="/usr/sbin/cupsd" name="/run/systemd/notify" pid=29527 comm="cupsd" requested_mask="w" denied_mask="w" fsuid=0 ouid=0 kernel: audit: type=1400 audit(1608880333.084:56): apparmor="DENIED" operation="sendmsg" profile="/usr/sbin/cupsd" name="/run/systemd/notify" pid=29527 comm="cupsd" requested_mask="w" denied_mask="w" fsuid=0 ouid=0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu55 Architecture: amd64 CasperMD5CheckResult: skip CupsErrorLog: E [25/Dec/2020:10:11:15 +0300] [CGI] ippfind (PID 12144) stopped with status 1! CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.04 InstallationDate: Installed on 2020-12-25 (0 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20201224) KernLog: Lpstat: Error: command ['lpstat', '-v'] failed with exit code 1: lpstat: No destinations added. MachineType: LENOVO INVALID NonfreeKernelModules: nvidia_modeset nvidia Package: cups 2.3.3op1-3ubuntu1 PackageArchitecture: amd64 Papersize: a4 ProcCmdline: BOOT_IMAGE=/@/boot/vmlinuz-5.8.0-34-generic root=UUID=b42aef37-b541-43bb-bef8-2dcb8f34df09 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-5.8.0-34-generic root=UUID=b42aef37-b541-43bb-bef8-2dcb8f34df09 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.8.0-34.37+21.04.1-generic 5.8.18 Tags: hirsute package-from-proposed Uname: Linux 5.8.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/11/2019 dmi.bios.release: 1.45 dmi.bios.vendor: LENOVO dmi.bios.version: 4KCN45WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: VIUU4 dmi.board.vendor: LENOVO dmi.board.version: NO DPK dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: INVALID dmi.ec.firmware.release: 1.45 dmi.modalias: dmi:bvnLENOVO:bvr4KCN45WW:bd01/11/2019:br1.45:efr1.45:svnLENOVO:pnINVALID:pvrINVALID:rvnLENOVO:rnVIUU4:rvrNODPK:cvnLENOVO:ct10:cvrINVALID: dmi.product.family: IDEAPAD dmi.product.name: INVALID dmi.product.sku: LENOVO_BI_IDEAPAD4K_BU_idea_FM_ dmi.product.version: INVALID dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1909297/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1846334] Re: cupsd assert failure: free(): invalid pointer
I'm also seeing this on a samsung printer -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1846334 Title: cupsd assert failure: free(): invalid pointer Status in cups package in Ubuntu: Fix Committed Bug description: Just running in the background, no user action (printing) ProblemType: Crash DistroRelease: Ubuntu 19.10 Package: cups-daemon 2.2.12-2ubuntu1 ProcVersionSignature: Ubuntu 5.3.0-16.17-generic 5.3.1 Uname: Linux 5.3.0-13-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu7 Architecture: amd64 AssertionMessage: free(): invalid pointer Date: Tue Oct 1 19:41:35 2019 ExecutablePath: /usr/sbin/cupsd InstallationDate: Installed on 2019-02-09 (234 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190203) Lpstat: device for HP_LaserJet_CM1415fn_44A808_: implicitclass://HP_LaserJet_CM1415fn_44A808_/ device for Samsung_C48x_Series_SEC84251900EE44_: implicitclass://Samsung_C48x_Series_SEC84251900EE44_/ MachineType: Dell Inc. Latitude E6530 Papersize: letter PpdFiles: HP_LaserJet_CM1415fn_44A808_: LaserJet CM1415fn - IPP Everywhere Samsung_C48x_Series_SEC84251900EE44_: C48x Series - IPP Everywhere ProcAttrCurrent: /usr/sbin/cupsd (enforce) ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-5.3.0-16-generic root=UUID=4cc2c833-0db9-4a3d-84d1-9f00f5785fca ro quiet splash vt.handoff=7 ProcEnviron: LANG=de_DE.UTF-8 PATH=(custom, no user) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-16-generic root=UUID=4cc2c833-0db9-4a3d-84d1-9f00f5785fca ro quiet splash vt.handoff=7 Signal: 6 SourcePackage: cups StacktraceTop: __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7f923ecb83a5 "%s\n") at ../sysdeps/posix/libc_fatal.c:181 malloc_printerr (str=str@entry=0x7f923ecb652a "free(): invalid pointer") at malloc.c:5332 _int_free (av=, p=, have_lock=0) at malloc.c:4173 ?? () from /lib/x86_64-linux-gnu/libcups.so.2 ippDelete () from /lib/x86_64-linux-gnu/libcups.so.2 Title: cupsd assert failure: free(): invalid pointer UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/30/2018 dmi.bios.vendor: Dell Inc. dmi.bios.version: A22 dmi.board.name: 07Y85M dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA22:bd11/30/2018:svnDellInc.:pnLatitudeE6530:pvr01:rvnDellInc.:rn07Y85M:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6530 dmi.product.sku: Latitude E6530 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1846334/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1915181] Re: cups crashes with SIGABRT every other printing attempt
I'm also seeing this on a samsung printer -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1915181 Title: cups crashes with SIGABRT every other printing attempt Status in cups package in Ubuntu: New Bug description: Using ubuntu 20.10, cups 2.3.3-3ubuntu1, with a networked Samsung C480 printer (was automatically detected and set up on installation of the system). Every other attempt to print fails with a varying message depending on the printing app (eg. on libreoffice write, "Cannot start printer"). Waiting a few minutes and retrying prints successfully. Looking at cups.service journal messages while attempting to print, it looks like the second printing attempt crashes cupsd cupsd[]: free(): invalid pointer systemd[1]: cups.service: Main process exited, code=dumped, status=6/ABRT systemd[1]: cups.service: Failed with result core-dump The service then proceeds to restart after a few seconds, and trying to print again succeeds. Trying to print once more thereafter triggers the issue again. Cuspd's error_log shows nothing happening around the crash (it does show some "org.freedesktop.ColorManager.AlreadyExists" error messages on restart, but I figured this would be normal, I can see the same message on other machines that have no printing issues). This is a pretty standard (and recent) ubuntu install, with not much customized; in particular no apport custom config was made, and nothing was configured on cups side or ubuntu print settings, everything is set up as it was autodetected on install. The same printer works flawlessly on a different computer using Arch and cups 2.3.3 as well (albeit without any ubuntu patches, obviously). --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50.5 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2021-01-28 (12 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) KernLog: Lpstat: device for Samsung_C48x_Series_SEC842519933D78_: implicitclass://Samsung_C48x_Series_SEC842519933D78_/ MachineType: ASUSTeK COMPUTER INC. ZenBook UX434DA_UM433DA Package: cups 2.3.3-3ubuntu1 PackageArchitecture: amd64 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/Samsung_C48x_Series_SEC842519933D78_.ppd'] failed with exit code 2: grep: /etc/cups/ppd/Samsung_C48x_Series_SEC842519933D78_.ppd: Permission denied ProcCmdline: BOOT_IMAGE=/vmlinuz-5.8.0-41-generic root=/dev/mapper/vgubuntu-root ro quiet splash resume=/dev/mapper/vgubuntu-root resume_offset=6731776 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.8.0-41-generic root=/dev/mapper/vgubuntu-root ro quiet splash resume=/dev/mapper/vgubuntu-root resume_offset=6731776 ProcVersionSignature: Ubuntu 5.8.0-41.46-generic 5.8.18 RebootRequiredPkgs: linux-image-5.8.0-43-generic linux-base Tags: groovy Uname: Linux 5.8.0-41-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/05/2019 dmi.bios.release: 5.14 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX434DA_UM433DA.302 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX434DA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX434DA_UM433DA.302:bd09/05/2019:br5.14:svnASUSTeKCOMPUTERINC.:pnZenBookUX434DA_UM433DA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX434DA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: ZenBook dmi.product.name: ZenBook UX434DA_UM433DA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1915181/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1871268] Re: Installation fails due to useless immediate configuration error when "Install Third-Party Drivers" is selected
Guys. What I don't get is that it is 2021 now, this bug has been reported (in 2019) and is tagged "fixed" and still the installer "crashed" and tells me it is this bug that is happening. This happens to me on a "clean" machine. I unplugged my harddisk, only have an SSD installed now. The installer image I downloaded yesterday (jan 23 2021). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1871268 Title: Installation fails due to useless immediate configuration error when "Install Third-Party Drivers" is selected Status in Ubuntu CD Images: Fix Released Status in apt package in Ubuntu: Fix Released Status in apt source package in Bionic: In Progress Status in apt source package in Focal: Fix Released Status in apt source package in Groovy: Fix Released Status in apt package in Debian: Unknown Bug description: [Impact] Installations that really succeeded would then fail because APT could not immediately configure a package. Which is a pointless way to fail at that point, because everything did work out anyway. We have two changes that help address this: * The first one stops immediately configuring multi-arch siblings (e.g. libc6:i386 when it's configuring libc6:amd64). This was not necessary, and caused all the libc6:i386 failures here. * The second change sort of also supersedes the first one: It just ignores any errors from immediate configuration, relying on the fact that it's checked and rectified at a later point if there are unconfigured packages (which is what made all those failures happen spuriously after having successfully installed everything). [Test case] We have one test case in EIPP format in the Debian bug 973305 which was only helped by the second change, not the first one. Run /usr/lib/apt/planners < eipp.log and check there are no errors. TODO: It's unclear if the APT from proposed installed in the live session will fix the installer, needs investigation, but would make a useful test case. [Regression potential] It's imaginable that we missed something somewhere and some path that checked for a set error doesn't check it anymore, and we report success when we hit an error, but it seems unlikely. Behavior of --simulate changes. This used to fail before as well, and will now only produce a warning. We don't believe that is a reason of concern. [Groovy SRU] The groovy SRU is a sync of the 2.1.11 micro release from Debian unstable which also incorporates changes to the documentation: A typo fix, replacing focal with groovy in examples, and minor Dutch manual pages translation updates. We do not have test cases for the documentation changes, and we do not consider there to be a huge regression potential. As long as they build, they should be readable - maybe some words are wrong in the translation, who knows. [Original bug report] Test Case 1. Install Ubuntu Desktop on hardware with an nVidia card and select to install 3rd party drivers 2. Proceed with installation The following error message is displayed in /var/log/syslog /plugininstall.py: Verifying downloads ... /plugininstall.py: Failed to find package object for /cdrom//pool/main/g/gcc-defaults/gcc_9.3.0-1ubuntu2_amd64.deb: "Version: '9.3.0-1ubuntu2' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/libx/libxcrypt/libcrypt-dev_4.4.10-10ubuntu4_amd64.deb: "Version: '4.4.10-10ubuntu4' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/g/gcc-defaults/g++_9.3.0-1ubuntu2_amd64.deb: "Version: '9.3.0-1ubuntu2' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/z/zlib/zlib1g_1.2.11.dfsg-2ubuntu1_i386.deb: "Version: '1.2.11.dfsg-2ubuntu1' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/libx/libxau/libxau6_1.0.9-0ubuntu1_i386.deb: "Version: '1.0.9-0ubuntu1' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/libx/libxdmcp/libxdmcp6_1.1.3-0ubuntu1_i386.deb: "Version: '1.1.3-0ubuntu1' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/libx/libx11/libx11-6_1.6.9-2ubuntu1_i386.deb: "Version: '1.6.9-2ubuntu1' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/libx/libxext/libxext6_1.3.4-0ubuntu1_i386.deb: "Version: '1.3.4-0ubuntu1' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/l/lm-sensors/libsensors5_3.6.0-2ubuntu1_i386.deb: "Version: '3.6.0-2ubuntu1' not found." /plugininstall.py: Failed to find package object for /cdrom//pool/main/libx/libx11/libx11-xcb1_1.6.9-2ubuntu1_i386.deb: "Version: '1.6.9-2ubuntu1' not found." /plugininstall.py: Failed to find package object for
[Touch-packages] [Bug 1782559] [NEW] Wayland hangs?
Public bug reported: I have an industrial PC that needs to run Ubuntu. Installing from USB stick was a hassle. (didn't work in dozens of combinations of memory stick (kingston/adata), usb slot (front, back), distribution(14.04, 16.04, 18.04), variant (server, desktop, mini, net) When I finally got it installed, the PC would hang after booting, never completing to the login. A recovery boot allowed me to install ssh, and using SSH I could see the wayland process. I'm a bit wary of wayland, so I removed it and now the system boots. model name : Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) ** Affects: wayland (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wayland in Ubuntu. https://bugs.launchpad.net/bugs/1782559 Title: Wayland hangs? Status in wayland package in Ubuntu: New Bug description: I have an industrial PC that needs to run Ubuntu. Installing from USB stick was a hassle. (didn't work in dozens of combinations of memory stick (kingston/adata), usb slot (front, back), distribution(14.04, 16.04, 18.04), variant (server, desktop, mini, net) When I finally got it installed, the PC would hang after booting, never completing to the login. A recovery boot allowed me to install ssh, and using SSH I could see the wayland process. I'm a bit wary of wayland, so I removed it and now the system boots. model name : Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wayland/+bug/1782559/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 551637] Re: debconf seems to require a controlling TTY even when no interaction is required
``` debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: ''' -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to debconf in Ubuntu. https://bugs.launchpad.net/bugs/551637 Title: debconf seems to require a controlling TTY even when no interaction is required Status in debconf package in Ubuntu: Confirmed Bug description: Binary package hint: debconf Having installed NTP on a very similar workstation I expected no interaction, so I typed: % ssh root@falbala apt-get install ntp Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: linux-headers-2.6.32-16-generic linux-headers-2.6.32-16 Use 'apt-get autoremove' to remove them. Suggested packages: ntp-doc The following NEW packages will be installed: ntp 0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded. Need to get 559kB of archives. After this operation, 1,450kB of additional disk space will be used. Get:1 http://nl.archive.ubuntu.com/ubuntu/ lucid/main ntp 1:4.2.4p8+dfsg-1ubuntu 1 [559kB] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 559kB in 1s (412kB/s) Selecting previously deselected package ntp. (Reading database ... E: Sub-process /usr/bin/dpkg received a segmentation fault . Of course adding "-t" on the ssh commandline works: assurancetourix:~> ssh -t root@falbala apt-get install ntp Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: linux-headers-2.6.32-16-generic linux-headers-2.6.32-16 Use 'apt-get autoremove' to remove them. Suggested packages: ntp-doc The following NEW packages will be installed: ntp 0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded. Need to get 0B/559kB of archives. After this operation, 1,450kB of additional disk space will be used. Selecting previously deselected package ntp. (Reading database ... 143304 files and directories currently installed.) Unpacking ntp (from .../ntp_1%3a4.2.4p8+dfsg-1ubuntu1_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up ntp (1:4.2.4p8+dfsg-1ubuntu1) ... * Starting NTP server ntpd [ OK ] Connection to falbala closed. --- but I don't think that debconf should complain/fail and cause dpkg to crash if it doesn't need to ask me anything. Ubuntu Lucid. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debconf/+bug/551637/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 551637] Re: debconf seems to require a controlling TTY even when no interaction is required
I tried it again: assurancetourix:~> ssh falbala sudo apt install ntp and this time I got... What's in the previous comment. (I looked for a "preview" button to see if I got the "quoted text" right. Expecting to be able to edit, and not finding the preview, I clicked subit. Now I can't find the "edit" either. Sorry ) So It seems the bug mostly got fixed in the past 8 years. At least for me it did -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to debconf in Ubuntu. https://bugs.launchpad.net/bugs/551637 Title: debconf seems to require a controlling TTY even when no interaction is required Status in debconf package in Ubuntu: Confirmed Bug description: Binary package hint: debconf Having installed NTP on a very similar workstation I expected no interaction, so I typed: % ssh root@falbala apt-get install ntp Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: linux-headers-2.6.32-16-generic linux-headers-2.6.32-16 Use 'apt-get autoremove' to remove them. Suggested packages: ntp-doc The following NEW packages will be installed: ntp 0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded. Need to get 559kB of archives. After this operation, 1,450kB of additional disk space will be used. Get:1 http://nl.archive.ubuntu.com/ubuntu/ lucid/main ntp 1:4.2.4p8+dfsg-1ubuntu 1 [559kB] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 559kB in 1s (412kB/s) Selecting previously deselected package ntp. (Reading database ... E: Sub-process /usr/bin/dpkg received a segmentation fault . Of course adding "-t" on the ssh commandline works: assurancetourix:~> ssh -t root@falbala apt-get install ntp Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: linux-headers-2.6.32-16-generic linux-headers-2.6.32-16 Use 'apt-get autoremove' to remove them. Suggested packages: ntp-doc The following NEW packages will be installed: ntp 0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded. Need to get 0B/559kB of archives. After this operation, 1,450kB of additional disk space will be used. Selecting previously deselected package ntp. (Reading database ... 143304 files and directories currently installed.) Unpacking ntp (from .../ntp_1%3a4.2.4p8+dfsg-1ubuntu1_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up ntp (1:4.2.4p8+dfsg-1ubuntu1) ... * Starting NTP server ntpd [ OK ] Connection to falbala closed. --- but I don't think that debconf should complain/fail and cause dpkg to crash if it doesn't need to ask me anything. Ubuntu Lucid. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debconf/+bug/551637/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589938] [NEW] Network cycles interfaces on DCP lease prolongation.
Public bug reported: I'm running a VMWARE virutal machine. Every time the host renews its DHCP lease, the virtual interface of the VM is cycled. Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5131] address 192.168.xxx.x Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5131] lease time 6000 Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5132] nameserver '192.168.xxx.x' Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5132] dhcp4 (eth0): state changed bound -> bound Jun 7 13:31:47 assurancetourix kernel: [1870761.608743] userif-3: sent link down event. Jun 7 13:31:47 assurancetourix kernel: [1870761.608745] userif-3: sent link up event. I suspect that the state change bound->bound causes a short (unnoticable to humans) interruption of the networking config, which the virtual interface for the VM notices. (in the VM the network then goes down for about ten seconds! Noticeable to humans... ). Description:Ubuntu 16.04 LTS network-manager: Installed: 1.2.0-0ubuntu0.16.04.2 Candidate: 1.2.0-0ubuntu0.16.04.2 Version table: *** 1.2.0-0ubuntu0.16.04.2 500 500 http://nl.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages 100 /var/lib/dpkg/status 1.1.93-0ubuntu4 500 500 http://nl.archive.ubuntu.com/ubuntu xenial/main amd64 Packages ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589938 Title: Network cycles interfaces on DCP lease prolongation. Status in network-manager package in Ubuntu: New Bug description: I'm running a VMWARE virutal machine. Every time the host renews its DHCP lease, the virtual interface of the VM is cycled. Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5131] address 192.168.xxx.x Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5131] lease time 6000 Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5132] nameserver '192.168.xxx.x' Jun 7 13:31:47 NetworkManager[1041]: [1465299107.5132] dhcp4 (eth0): state changed bound -> bound Jun 7 13:31:47 assurancetourix kernel: [1870761.608743] userif-3: sent link down event. Jun 7 13:31:47 assurancetourix kernel: [1870761.608745] userif-3: sent link up event. I suspect that the state change bound->bound causes a short (unnoticable to humans) interruption of the networking config, which the virtual interface for the VM notices. (in the VM the network then goes down for about ten seconds! Noticeable to humans... ). Description:Ubuntu 16.04 LTS network-manager: Installed: 1.2.0-0ubuntu0.16.04.2 Candidate: 1.2.0-0ubuntu0.16.04.2 Version table: *** 1.2.0-0ubuntu0.16.04.2 500 500 http://nl.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages 100 /var/lib/dpkg/status 1.1.93-0ubuntu4 500 500 http://nl.archive.ubuntu.com/ubuntu xenial/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1589938/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1571296] [NEW] Sawfish crash
Public bug reported: After upgrading from 15.10, xenial-sawfish stops with an error indicating that wallpaper can't be found. Turns out it is looking for wallpaper.jl or wallpaper.jlc. I searched for the file, installed it where it could find it, and that is currently my workaround. I reported it as "returns to login prompt", because that's what would normally happen. I've seen sawfish crashes in the past, and I've recently figured out enough to maybe catch it in the act to make a sensible report about it. But since Xenial is so close that's not worth persuing. Those crashes (losing my x session) were so annoying that I have wrapped sawfish in a script that asks: really quit? before exiting the loop of restarting sawfish. So... somehow the wallpaper.jl is not being included the package. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6 Uname: Linux 4.4.0-18-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Apr 17 09:55:51 2016 DistUpgraded: 2016-04-16 20:51:02,019 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: xenial DistroVariant: ubuntu DkmsStatus: virtualbox, 5.0.16, 4.2.0-35-generic, x86_64: installed virtualbox, 5.0.16, 4.4.0-18-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GF119 [GeForce GT 610] [1043:8496] InstallationDate: Installed on 2014-11-16 (517 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) MachineType: ASUS All Series ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-18-generic root=UUID=1bf2d530-c709-4cd6-9048-ab7aa16135e0 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg crash UpgradeStatus: Upgraded to xenial on 2016-04-16 (0 days ago) dmi.bios.date: 05/15/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0908 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: B85M-G dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0908:bd05/15/2014:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnB85M-G:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS version.compiz: compiz 1:0.9.12.2+16.04.20160331-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Sun Apr 17 08:21:06 2016 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputEee PC WMI hotkeys KEYBOARD, id 8 inputAT Translated Set 2 keyboard KEYBOARD, id 9 inputImPS/2 Logitech Wheel Mouse MOUSE, id 10 xserver.errors: Failed to load module "nvidia" (module does not exist, 0) Failed to load module "nvidia" (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.18.3-1ubuntu2 xserver.video_driver: nouveau ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug crash ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1571296 Title: Sawfish crash Status in xorg package in Ubuntu: New Bug description: After upgrading from 15.10, xenial-sawfish stops with an error indicating that wallpaper can't be found. Turns out it is looking for wallpaper.jl or wallpaper.jlc. I searched for the file, installed it where it could find it, and that is currently my workaround. I reported it as "returns to login prompt", because that's what would normally happen. I've seen sawfish crashes in the past, and I've recently figured out enough to maybe catch it in the act to make a sensible report about it. But since Xenial is so close that's not worth persuing. Those crashes (losing my x session) were so annoying that I have wrapped
