On 17:27 Fri 05 Dec , Nicolas Ferre wrote:
This patch adds the possiblity to choose the media where the environment will
be located. This allow to choose this fundamental configuration without
editing
config files.
Documentation file added.
Signed-off-by: Nicolas Ferre [EMAIL
On Fri, 5 Dec 2008 07:27:37 +0100
Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED] wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
---
board/renesas/r2dplus/lowlevel_init.S |2 +-
drivers/pci/pci_sh7751.c |4 ++--
2 files changed, 3
On Tue, 2 Dec 2008 07:40:03 +0100
Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED] wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
---
board/renesas/r2dplus/lowlevel_init.S | 42
1 files changed, 21 insertions(+), 21 deletions(-)
Hi Wolfgang,
Please pull The following changes since commit
90665e3d97948000f98846ded37c921c7ae67dd7:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-at91
are available in the git repository at:
git://git.denx.de/u-boot-at91.git master
Nicolas Ferre (1):
I've run u-boot with all of these patches and see it working well on
Beagle.
On Dec 6, 2008, at 1:00 AM, Dirk Behme wrote:
mmc_init was always returning success -- now returns failure if
no card is present.
Signed-off-by: Steve Sakoman [EMAIL PROTECTED]
Signed-off-by: Dirk Behme [EMAIL
Is it possible to rename boot.script to boot.scr or something with an
8.3 filename, in case someone formats their SD card as msdos, rather
than vfat?
On Dec 6, 2008, at 1:03 AM, Dirk Behme wrote:
Enable hush command parser and set default environment to boot
from MMC if
a bootable card
On 18:42 Sat 29 Nov , Daniel Mack wrote:
Hi,
this patch adds support for Toradex' Colibri PXA300 module. I had to
modify the AX88796 driver a bit to make it work, but that goes in a
different patch.
some general comment
please becarefull on the 80 chars limit
please check all the
Hi,
On Sat, Dec 06, 2008 at 06:11:04PM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 18:42 Sat 29 Nov , Daniel Mack wrote:
Hi,
this patch adds support for Toradex' Colibri PXA300 module. I had to
modify the AX88796 driver a bit to make it work, but that goes in a
different
===
--- u-boot-arm.orig/include/asm-arm/arch-omap3/omap3.h
+++ u-boot-arm/include/asm-arm/arch-omap3/omap3.h
@@ -75,7 +75,15 @@
/* 32KTIMER */
#define SYNC_32KTIMER_BASE 0x4832
-#define S32K_CR
On 10:38 Sat 06 Dec , Jason Kridner wrote:
Is it possible to rename boot.script to boot.scr or something with an
8.3 filename, in case someone formats their SD card as msdos, rather
than vfat?
Ack
Best Regards,
J.
___
U-Boot mailing list
- fat_register_device(mmc_blk_dev, 1);
- return 0;
+ if (configure_mmc(cur_card_data) == 1) {
+ mmc_blk_dev.if_type = IF_TYPE_MMC;
+ mmc_blk_dev.part_type = PART_TYPE_DOS;
+ mmc_blk_dev.dev = 0;
+ mmc_blk_dev.lun = 0;
+
On 09:41 Fri 05 Dec , Remy Bohmer wrote:
Hello Jean-Christophe,
@@ -33,9 +33,13 @@ ifeq ($(ARCH),arm)
ifeq ($(BOARD),omap2420h4)
LOAD_ADDR = 0x8030
else
+ifeq ($(BOARD),at91sam9261ek)
+LOAD_ADDR = 0x2140
+else
LOAD_ADDR = 0xc10
endif
endif
+endif
On 11:28 Wed 03 Dec , Timur Tabi wrote:
All implementations of the functions i2c_reg_read() and i2c_reg_write() are
identical. We can save space and simplify the code by converting these
functions into inlines and putting them in i2c.h.
Signed-off-by: Timur Tabi [EMAIL PROTECTED]
Hello Stefan,
please see comments below:
Stefan Althoefer wrote:
[PATCH] video: Add new driver for Silicon Motion SM501/SM502
this line duplicates the subject, so simply remove it.
This patch adds a new driver for SM501/SM502. Compared to the
existing driver it allows dynamic selection of
On 00:14 Wed 26 Nov , Grazvydas Ignotas wrote:
This patch adds configuration file for OMAP3 Pandora.
Signed-off-by: Grazvydas Ignotas [EMAIL PROTECTED]
---
include/configs/omap3_pandora.h | 302
+++
1 files changed, 302 insertions(+), 0
diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
new file mode 100644
index 000..7c0c5b4
--- /dev/null
+++ b/board/omap3/pandora/pandora.c
@@ -0,0 +1,124 @@
+/*
Copyright?
+ * Maintainer : Grazvydas Ignotas [EMAIL PROTECTED]
+ *
+ * Derived from Beagle
On 22:25 Thu 04 Dec , Remy Bohmer wrote:
Currently the arm926ejs tree has the armv4 option set during compilation.
This flag does not belong here because a arm926 CPU is always a armv5 CPU.
Signed-off-by: Remy Bohmer [EMAIL PROTECTED]
---
cpu/arm926ejs/at91/config.mk |1 -
This patch fixes the PCI handling routines of the IXP port.
It seems that this hasn't been touched for quite a while and
u-boot PCI handling has changed since then (but nobody
update IXP).
Changes (list uncomplete):
- non_prefetched_read/write now return ERROR on
(master-) abort.
-
Hi Anatolij,
snip
Use CONFIG_VIDEO_SM501NEW to enable the driver.
not sure if CONFIG_VIDEO_SM501NEW is a good chose here. Maybe
we should use s.th. like CONFIG_VIDEO_SM50x. This applies to
the file names too: sm50x.h, sm50x.c, etc. Even better would
be a merge with the existing driver.
Dear Peter Tyser,
In message [EMAIL PROTECTED] you wrote:
Use the GNU 'date' command to auto-generate a new U-Boot
timestamp on every compile.
Signed-off-by: Peter Tyser [EMAIL PROTECTED]
---
Changes since v1:
* Split up U_BOOT_DATE define (date and time) into
U_BOOT_DATE (day, month,
I posted new version of patch to fix some more errors and style, so
this is obsolete.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Peter Tyser,
In message [EMAIL PROTECTED] you wrote:
Allow tqm8xx.c to cleanly compile when CONFIG_LCD_INFO is
defined and remove unneeded version.h from lcd.c
Signed-off-by: Peter Tyser [EMAIL PROTECTED]
---
I noticed this when adding timestamp.h to tqm8xx.c.
The Update U-Boot's
Dear Niklaus Giger,
In message [EMAIL PROTECTED] you wrote:
The following improvements are made and tested on my HCUx boards:
README
- document bootvx and CONFIG_SYS_VXWORKS parameters
vxworks.h
- add new vxworks.h with some default definitions
cmd_elf.c
- fix size too small by one
Dear Niklaus Giger,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Niklaus Giger [EMAIL PROTECTED]
---
common/cmd_elf.c | 81
--
1 files changed, 30 insertions(+), 51 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Dear Niklaus Giger,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Niklaus Giger [EMAIL PROTECTED]
---
include/configs/netstal-common.h | 29 ++---
1 files changed, 14 insertions(+), 15 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX
CONFIG_SC520 is now used for conditional compile
Signed-off-by: Graeme Russ [EMAIL PROTECTED]
---
cpu/i386/sc520/sc520.c |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c
index 50bd8ef..12e8f38 100644
---
Signed-off-by: Graeme Russ [EMAIL PROTECTED]
---
board/eNET/u-boot.lds |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds
index 2dafbb5..9e02326 100644
--- a/board/eNET/u-boot.lds
+++ b/board/eNET/u-boot.lds
@@ -75,7 +75,7
Signed-off-by: Graeme Russ [EMAIL PROTECTED]
---
board/sc520_cdp/sc520_cdp.c |2 +-
drivers/misc/ali512x.c |2 +-
include/{asm-i386/ic = }/ali512x.h |0
3 files changed, 2 insertions(+), 2 deletions(-)
rename include/{asm-i386/ic = }/ali512x.h (100%)
diff --git
Reset function specific to AMD SC520 microcontroller - Is more of a 'hard
reset' that the triple fault.
Signed-off-by: Graeme Russ [EMAIL PROTECTED]
--
Requires CONFIG_SYS_RESET_SC520 to be defined in config
I would have liked to add this to a new file (cpu/i386/sc520/reset.c) but ld
requires
Forgotten in commit d1f2d102a266804a50ff0cd9794459791f057c94
Signed-off-by: Graeme Russ [EMAIL PROTECTED]
---
include/configs/eNET.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 7d4e21f..16dfb3f 100644
---
Options are now all uniformly CONFIG_SYS_SC520_option
Signed-off-by: Graeme Russ [EMAIL PROTECTED]
---
board/sc520_cdp/sc520_cdp.c | 16
cpu/i386/sc520/Makefile |4 ++--
cpu/i386/sc520/sc520.c|6 +++---
cpu/i386/sc520/sc520_asm.S|4 ++--
Dear Mike Frysinger,
In message [EMAIL PROTECTED] you wrote:
When running `strings` on really long strings, the stack tends to get
smashed due to printf(). Switch to puts() instead since we're only passing
the data through.
Signed-off-by: Mike Frysinger [EMAIL PROTECTED]
---
Dear Mike,
in message [EMAIL PROTECTED] you wrote:
...but would it not make sense to allow to make the decision which
behaviour fits the user's requirements at runtime instead of compile
time?
We could either make this depend on some environment variable setting,
or on a command line
Dear Gary Jennejohn,
In message [EMAIL PROTECTED] you wrote:
Modifications to support console multiplexing. This is controlled using
CONFIG_SYS_CONSOLE_MUX in the board configuration file.
This allows a user to specify multiple console devices in the environment
with a command like this:
Dear Richard Retanubun,
In message [EMAIL PROTECTED] you wrote:
Corrected endian order printing for compact flash serial number.
Signed-off-by: Richard Retanubun [EMAIL PROTECTED]
---
common/cmd_ide.c |7 ---
1 files changed, 4 insertions(+), 3 deletions(-)
Applied, thanks.
Best
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
---
drivers/bios_emulator/Makefile |3 ++-
drivers/bios_emulator/atibios.c |5 -
drivers/bios_emulator/besys.c
Hello Stefan,
Stefan Althoefer wrote:
[PATCH] video: Add new driver for Silicon Motion SM501/SM502
This patch adds a new driver for SM501/SM502. Compared to the
existing driver it allows dynamic selection of resolution
(environment: videomode).
The drive is based on Vincent Sanders and
Dear Gary Jennejohn,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Gary Jennejohn [EMAIL PROTECTED]
---
board/keymile/mgcoge/Makefile |3 +-
board/keymile/mgcoge/mgcoge_hdlc_enet.c | 276
+++
2 files changed, 278 insertions(+), 1
Dear Gary Jennejohn,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Gary Jennejohn [EMAIL PROTECTED]
---
board/keymile/mgsuvd/Makefile |3 +-
board/keymile/mgsuvd/mgsuvd_hdlc_enet.c | 278
+++
2 files changed, 280 insertions(+), 1
39 matches
Mail list logo