Hi,
I use ubuntu 9.04 system.
The shell is bash version is : GNU bash, version 3.2.48(1)-release
(i486-pc-linux-gnu)
The make version is: GNU Make 3.81
The step I take to compile the u-boot is :
make smdk6400_config
make all
below is the some message from compiling:
Hi! Thanks for the beautiful project! Ive tried to launch standalone
app 'hello_world' on my SPARC leon3 board (ml-402) and found that
application says 'boom' and halts. So here is the patch to solve the
problem. Seems, that i am the first who ever launched Sparc'ish
standalone code :)
--
Hi
I have added a new command in the test_cmd u-boot. after adding test_cmd
, help command and many of the other commands are not working. help
command gives
Unknown command 'help' - try 'help'.
tftp gives
Unknown command 'tftp' - try 'help'.
The command i have added is working fine.
I have
Hello,
I'm trying to startup the latest kernel image (2.6.31) for my mpc8572ds
machine. I have downloaded the kernel's source code at kernel.org and i
have compiled it with a native ppc compiler using make uImage.
At this moment I have in my system my uImage and u-boot-2009-08 programmed
in the
Dear Jean-Christophe
2009/9/11 Minkyu Kang proms...@gmail.com:
Dear Wolfgang,
2009/9/10 Wolfgang Denk w...@denx.de:
Dear Minkyu Kang,
In message 4aa8ac42.50...@samsung.com you wrote:
This patch includes the serial driver for s5pc1xx
Signed-off-by: Minkyu Kang mk7.k...@samsung.com
...
Joakim Tjernlund wrote:
Timur Tabi ti...@freescale.com wrote on 15/09/2009 21:04:47:
Joakim Tjernlund wrote:
No, the impact on speed from DFSR is pretty small so it will
be close enough.
How small?
From the app note:
divisor = B * (A + ((3*C)/B)*2);
C is dfsr and 10 = A = 30, 16 = B =
Some boards need a higher DFSR value than the spec currently
recommends so give these boards the means to define there own.
For completeness, add CONFIG_FSL_I2C_CUSTOM_DFR too.
Signed-off-by: Joakim Tjernlund joakim.tjernl...@transmode.se
---
drivers/i2c/fsl_i2c.c | 14 +++---
1 files
The latest AN2819 has changed the way FDR/DFSR should be calculated.
Update the driver according to spec. However, Condition 2
is not accounted for as it is not clear how to do so.
Signed-off-by: Joakim Tjernlund joakim.tjernl...@transmode.se
---
drivers/i2c/fsl_i2c.c | 88
After issuing a STOP one must wait until the STOP has completed
on the bus before doing something new to the controller.
Also add an extra read of SR as the manual mentions doing that
is a good idea.
Remove surplus write of CR just before a write, isn't required and
could potentially disturb the
Wolfgang Grandegger w...@denx.de wrote on 16/09/2009 12:22:05:
Joakim Tjernlund wrote:
Timur Tabi ti...@freescale.com wrote on 15/09/2009 21:04:47:
Joakim Tjernlund wrote:
No, the impact on speed from DFSR is pretty small so it will
be close enough.
How small?
From the app note:
Hi, everyone
I'm running u-boot (2009.03) in S3C2410 board now.
But I have a problem.
It seems that bl lowlevel_init routine in ARM920t/start.s is not working.
The label, lowlevel_init, is defined as global label in
/board/samsung/s3c2410/lowlevel_init.s
and is seen system.map file.
I think
Joakim Tjernlund wrote:
Wolfgang Grandegger w...@denx.de wrote on 16/09/2009 12:22:05:
Joakim Tjernlund wrote:
Timur Tabi ti...@freescale.com wrote on 15/09/2009 21:04:47:
Joakim Tjernlund wrote:
No, the impact on speed from DFSR is pretty small so it will
be close enough.
How small?
From
Dear Rupesh Kumar,
In message
of0d18afed.10d56b57-on65257633.002e3d05-65257633.002d3...@lntemsys.com you
wrote:
I have added a new command in the test_cmd u-boot. after adding test_cmd
, help command and many of the other commands are not working. help
Do you think we can guess what's
Wolfgang Grandegger w...@grandegger.com wrote on 16/09/2009 13:45:03:
Joakim Tjernlund wrote:
Wolfgang Grandegger w...@denx.de wrote on 16/09/2009 12:22:05:
Joakim Tjernlund wrote:
Timur Tabi ti...@freescale.com wrote on 15/09/2009 21:04:47:
Joakim Tjernlund wrote:
No, the impact on
Hi Kumar, Anton,
Kumar Gala wrote:
On Aug 19, 2009, at 1:37 PM, Anton Vorontsov wrote:
Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
constant. With multi-serial support, the CONS_INDEX may no longer
represent actual console, so we should try to extract port number
Hi All,
When i executed fw_printenv on an embedded board , it threw an error
IOCTL error : Cannot get MTD information!! Any idea why this error
occurred?
The contents of config file which i used shown below
# MTD device name Device offset Env. size Flash sector size
Number of
Hi Rupesh,
I have added a new command in the test_cmd u-boot. after adding test_cmd
, help command and many of the other commands are not working. help
command gives
Unknown command 'help' - try 'help'.
tftp gives
Unknown command 'tftp' - try 'help'.
The command i have added is
Dear Rahanesh,
In message 4ab0dfca.4040...@tataelxsi.co.in you wrote:
When i executed fw_printenv on an embedded board , it threw an error
IOCTL error : Cannot get MTD information!! Any idea why this error
occurred?
Well, looking in the source code, I see a single place with a
Hi everybody...
The reorganization of the ARM custodian setup has caused some changes
to the workflow, and I wonder if we should allow for a longer merge
window?
What do you think about stretching the MW by another week (with or
without also shifting the release date) ?
Best regards,
Wolfgang
Hi Wolfgang
Cannot get MTD information: Inappropriate ioctl for device got printed
Thanks
Rahanesh
Wolfgang Denk wrote:
Dear Rahanesh,
In message 4ab0dfca.4040...@tataelxsi.co.in you wrote:
When i executed fw_printenv on an embedded board , it threw an error
IOCTL error : Cannot
Hi all,
Thanks for the help Sorry for the confusion created.
Actually while copying U-boot to NAND flash, somehow by mistake, full
U-boot image was not copied. As a result this problem was created.
Now i have fixed the problem by copying complete u-boot image.
Thanks
Rupesh
Detlev
Dear Rahanesh,
please do not top post / full quote. Please make sure to read
http://www.netmeister.org/news/learn2quote.html
In message 4ab0e9c3.10...@tataelxsi.co.in you wrote:
Cannot get MTD information: Inappropriate ioctl for device got printed
Well, that most certainly means that your
Hi Wolfgang,
On Wednesday 16 September 2009 15:32:26 Wolfgang Denk wrote:
The reorganization of the ARM custodian setup has caused some changes
to the workflow, and I wonder if we should allow for a longer merge
window?
What do you think about stretching the MW by another week (with or
Hi all,
I`ve implemented Gaisler Research`s Leon3 SPARC core to a FPGA evaluation board
of Actel. Now I`m about to get U-Boot running. So I made up my own board
directory, added header files with my configuration-parameters etc. just as
discribed in the u-boot README.
The make myboard_config
Thanks for review Jerry.
On Wed, Sep 16, 2009 at 08:59:14AM -0400, Jerry Van Baren wrote:
[...]
Below is a *HAND MODIFIED* (i.e. probably broken) edit of Anton's
patch reflecting my thoughts.
I'll leave it up to Anton and Kumar... I'm OK with Anton's original
patch and you have my
Signed-off-by: Marcel Ziswiler marcel.ziswi...@noser.com
Acked-by: Guennadi Liakhovetski g.liakhovet...@gmx.de
---
Changes since v1:
- CC all respective board maintainers
Changes since v2:
- Added Guennadi Liakhovetski's ack
README|6 --
include/configs/IDS8247.h
Anton Vorontsov wrote:
Thanks for review Jerry.
On Wed, Sep 16, 2009 at 08:59:14AM -0400, Jerry Van Baren wrote:
[...]
Below is a *HAND MODIFIED* (i.e. probably broken) edit of Anton's
patch reflecting my thoughts.
I'll leave it up to Anton and Kumar... I'm OK with Anton's original
patch
On Sep 16, 2009, at 8:49 AM, Stefan Roese wrote:
Hi Wolfgang,
On Wednesday 16 September 2009 15:32:26 Wolfgang Denk wrote:
The reorganization of the ARM custodian setup has caused some changes
to the workflow, and I wonder if we should allow for a longer merge
window?
What do you think
On Wed, Sep 16, 2009 at 5:40 AM, duckycool duckyc...@gmail.com wrote:
Correction, the nand flash is K9F8G08U0M.
K9F8G08U0M is a 4KB page size NAND flash.
Freescale eLBC NAND flash controller does not support 4KB page size.
thanks
bmeng
___
U-Boot
On Wednesday 16 September 2009 15:32:26 Wolfgang Denk wrote:
The reorganization of the ARM custodian setup has caused some changes
to the workflow, and I wonder if we should allow for a longer merge
window?
What do you think about stretching the MW by another week (with or
without
Hi,
I'm not using eLBC, but UPM of local bus controller of mpc8544.
Bin Meng wrote:
On Wed, Sep 16, 2009 at 5:40 AM, duckycool duckyc...@gmail.com wrote:
Correction, the nand flash is K9F8G08U0M.
K9F8G08U0M is a 4KB page size NAND flash.
Freescale eLBC NAND flash controller
Wolfgang Denk wrote:
Hi everybody...
The reorganization of the ARM custodian setup has caused some changes
to the workflow, and I wonder if we should allow for a longer merge
window?
What do you think about stretching the MW by another week (with or
without also shifting the release date)
On Wed, Sep 16, 2009 at 11:55:12PM +0800, Bin Meng wrote:
On Wed, Sep 16, 2009 at 5:40 AM, duckycool duckyc...@gmail.com wrote:
Correction, the nand flash is K9F8G08U0M.
K9F8G08U0M is a 4KB page size NAND flash.
Freescale eLBC NAND flash controller does not support 4KB page size.
Hi! Read carefullly your config file!
I've working with same things (Gaisler+Leon3+Gcc-4.3.3) on board
ML-402. My config compiles without problem, so i suggest that makefile
is good.
2009/9/16 Kraitschy, Tobias tobias.kraits...@siemens.com:
Hi all,
I`ve implemented Gaisler Research`s Leon3
Hi Simon,
On Tuesday 15 September 2009 22:34:43 Wolfgang Denk wrote:
Dear Simon Kagstrom,
In message 20090824091012.0df5b...@marrow.netinsight.se you wrote:
Define ffs/fls for all architectures
UBIFS requires fls(), which is not defined for arm (and some other
architectures) and this
This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.
Signed-off-by: Anton Vorontsov avoront...@ru.mvista.com
---
drivers/qe/uec.h |1 +
drivers/qe/uec_phy.c | 15 +--
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/qe/uec.h
Headers should include headers containing prototypes and defines they
depend on, don't assume that they're included by somebody else.
Signed-off-by: Anton Vorontsov avoront...@ru.mvista.com
---
drivers/qe/uccf.h |1 +
drivers/qe/uec.h |3 +++
2 files changed, 4 insertions(+), 0
Since commit 5c2ff323a94e27e481f70c44838d43fcd844dd46 (mpc8360emds:
rework LBC SDRAM setup), LBC SDRAM is available for use in Linux.
Though, it appears that QE Ethernet in Gigabit mode can't transmit
large packets when it tries to work with a data in LBC SDRAM (memtest
didn't discover any
This patch fixes various ethernet issues with gigabit links handling
in U-Boot. The workarounds originally implemented by Kim Phillips for
Linux kernel.
Signed-off-by: Anton Vorontsov avoront...@ru.mvista.com
---
board/freescale/mpc8360emds/mpc8360emds.c | 56 +---
With this patch we can change QE USB mode without need to hand-edit
the device tree.
Signed-off-by: Anton Vorontsov avoront...@ru.mvista.com
---
board/freescale/mpc8360emds/mpc8360emds.c | 12
include/configs/MPC8360EMDS.h |2 ++
2 files changed, 14 insertions(+),
On Tue, 15 Sep 2009, Wolfgang Denk wrote:
Dear Guennadi Liakhovetski,
In message pine.lnx.4.64.0909152214370.4...@axis700.grange you wrote:
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
-(u32 *)
Dear Kumar Gala,
In message pine.lnx.4.64.0909152219420.17...@localhost.localdomain you wrote:
The following changes since commit 3ca55bce9c8bf00df06a20487fafc16fa2f8084b:
Marcel Ziswiler (1):
mpc8260: remove Ethernet node fixup to use generic FDT code.
are available in the git
On Mon, 2009-09-14 at 23:26 +0200, Wolfgang Denk wrote:
Dear Peter Tyser,
In message 1252709159-22326-1-git-send-email-pty...@xes-inc.com you wrote:
** This patch is only meant to allow others to test relocation, it
should not be applied!! **
This patch is a quick hack to enable
Hi Anton,
Thank you, I have done a lot trial and error but still in vain.
I'm using u-boot-2009.06-rc3.
This is my /board/freescale/mpc8544board/nand.c below, as to nand_base.c
and fsl_upm.c I didn't change change anything.
=== nand.c
The more standard 'source' command provides identical functionality to
the autoscr command.
Environment variable names/values on the MVBC_P, MVBML7, kmeter1,
mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'.
The 'autoscript' and 'autoscript_uname' environment variables are
Remove board-specific #ifdefs for calling misc_init_r() during
initializtion
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
include/configs/CCM.h|1 +
include/configs/CPCI405.h|1 +
include/configs/CPCI4052.h |1 +
include/configs/CPCI405AB.h |1
Remove board-specific #ifdefs for calling phy_reset() during
initializtion
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
include/configs/CCM.h|1 +
include/configs/ELPT860.h|1 +
include/configs/IP860.h |1 +
include/configs/IVML24.h |2 ++
Hi List,
I understand NOR-based flash memory devices have traditionally been used for
non-volatile storage for a bootloader and other various advantages including
support for execute-in-place code, random access to memory, and zero error
rate, etc. However, we have a project that we would like
Dear Wolfgang,
Well, that most certainly means that your /dev/mtd0 is not a NOR or
NAND flash device.
I use mtd_debug utility to identify the /dev/mtd0 device. It said
it is Nor flash.
Thanks
Rahanesh
___
U-Boot mailing list
Hello Joakim,
Joakim Tjernlund wrote:
The latest AN2819 has changed the way FDR/DFSR should be calculated.
Update the driver according to spec. However, Condition 2
is not accounted for as it is not clear how to do so.
Thanks for your work, just some minor Codingstyle comments:
50 matches
Mail list logo
