On 12/06/2012 18:37, Vikram Narayanan wrote:
Changes from v1:
Used appropriate gpio_* lib calls.
---
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Changelog must go after the --- line and commit message before. They
are swapped. Apart of that..
On 13/05/2012 01:40, Otavio Salvador wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk
On 11/05/2012 17:37, Otavio Salvador wrote:
The macro mistakenly referred to 32bit struct instead of 8bit one.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
Cc: Fabio Estevam fabio.este...@freescale.com
Cc: Marek Vasut ma...@denx.de
---
Applied to u-boot-imx, thanks.
Best
On 13/05/2012 01:40, Otavio Salvador wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk
On 15/05/2012 22:59, Otavio Salvador wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
Cc: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
On 13/05/2012 01:40, Otavio Salvador wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/m28evk.h |6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index ebf7e39..c1ae996 100644
On 13/05/2012 01:40, Otavio Salvador wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk
On Thu Jun 07, 2012 at 03:25:27PM +0530, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
This series adds MMC/SD, NAND and NOR SPL support
for Logic PD's DA850/OMAP-L138 EVM. This series
also fixes some issues found on the EVM during
testing. The patches are sent in a series
Dear Liu Hui-R64343,
-Original Message-
From: Dirk Behme [mailto:dirk.be...@de.bosch.com]
Sent: Tuesday, June 12, 2012 11:05 PM
To: Fabio Estevam; Liu Hui-R64343
Cc: Vikram Narayanan; u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in
On Wed, Jun 13, 2012 at 8:18 AM, Marek Vasut ma...@denx.de wrote:
I really dislike how write 1 should have no effect sounds. Can you please
check with HW people?
I agree.
Jason, please check this with the design team.
Vikram's patch look correct.
Regards,
Fabio Estevam
Hi, Marek,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: Wednesday, June 13, 2012 7:18 PM
To: u-boot@lists.denx.de
Cc: Liu Hui-R64343; Dirk Behme; Fabio Estevam
Subject: Re: [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in
imximage.cfg
Dear Liu Hui-R64343,
On Mon, Jun 11, 2012 at 12:02 PM, Vikram Narayanan vikram...@gmail.com wrote:
Also, this macro is useful not only for mx25, and it would be nice to
let it avaible for the other i.MX SoCs as well.
Agree. But I guess u-boot doesn't have a common folder where this can be put
up something like
Hi Mike,
On Sat, Jan 14, 2012 at 5:36 PM, Mike Frysinger vap...@gentoo.org wrote:
On Saturday 14 January 2012 19:47:16 Simon Glass wrote:
--- a/arch/arm/cpu/armv7/tegra2/funcmux.c
+++ b/arch/arm/cpu/armv7/tegra2/funcmux.c
+struct pingroup_config disp1_default[] = {
const ? although
On 06/12/2012 12:29 PM, Holger Brunck wrote:
On 06/12/2012 11:32 AM, Prafulla Wadaskar wrote:
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 12 June 2012 14:08
To: Prafulla Wadaskar
Cc: Valentin Longchamp; prafu...@mavell.com; u-boot@lists.denx.de;
Hi Mike,
On Sat, Jan 14, 2012 at 5:38 PM, Mike Frysinger vap...@gentoo.org wrote:
On Saturday 14 January 2012 19:47:23 Simon Glass wrote:
We want to make the display section-aligned on ARM so that we can easily
turn off data caching for this.
Is this useful for other architectures? We
Hi Mike,
On Sat, Jan 14, 2012 at 6:16 PM, Mike Frysinger vap...@gentoo.org wrote:
On Saturday 14 January 2012 20:57:25 Simon Glass wrote:
On Sat, Jan 14, 2012 at 5:42 PM, Mike Frysinger wrote:
On Saturday 14 January 2012 19:47:24 Simon Glass wrote:
--- a/common/cmd_echo.c
+++
Dear Liu Hui-R64343,
[...]
According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has bits
4 and 5 read-only and the value is always set as zero.
So write '0' to these bits instead of writing '1'.
Jason, Fabio: What do you think? You should be the datasheet
'masters' ;)
Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this
patch.
--
According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
bits 4 and 5 read-only and the value is always set as zero.
So write '0' to these bits instead of writing '1'.
I'm
From: Valentin Longchamp valentin.longch...@keymile.com
We overwrite these weak functions from the kirkwood spi code to
use our own method to be able to switch between the SPI NOR and
the NAND flash. This is needed e.g. to update the u-boot. The former
command do_spi_toggle can therefore be
From: Valentin Longchamp valentin.longch...@keymile.com
So that they can be redefined by some boards specific values.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
Signed-off-by: Holger Brunck holger.bru...@keymile.com
cc: Prafulla Wadaskar prafu...@marvell.com
---
Hi
Hi, Marek,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: Wednesday, June 13, 2012 8:25 PM
To: u-boot@lists.denx.de
Cc: Liu Hui-R64343; Dirk Behme
Subject: Re: [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in
imximage.cfg
Dear Liu Hui-R64343,
[...]
Dear Liu Hui-R64343,
Hi, Marek,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: Wednesday, June 13, 2012 8:25 PM
To: u-boot@lists.denx.de
Cc: Liu Hui-R64343; Dirk Behme
Subject: Re: [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in
imximage.cfg
Dear
On 06/08/2012 03:52 PM, Anatolij Gustschin wrote:
Hi,
On Thu, 24 May 2012 14:42:39 +0300
Igor Grinberggrinb...@compulab.co.il wrote:
From: Nikita Kiryanovnik...@compulab.co.il
Simplify #ifdefs by slightly changing the order of operations
Signed-off-by: Nikita
For u-boot this board is similar to mgcoge3un. But some differences
are present. We have a different SDRAM on it and therefore a new
SDRAM config file. Additionaly this board has a direct MAC/MAC
connection from the kirkwood to a marvell simple switch without a
phy inbetween, this needs a new
Remove config options from boards.cfg and simply add one switch
per board and differ afterwards in km_kirkwood.h between the features.
More boards are upcoming and therefore it's easier to have this
at one place.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
Signed-off-by: Valentin
Updated after some comments on the Mailing list.
From the previous version was removed and send as standalone patch:
[PATCH 03/20] arm/kirkwood: protect the ENV_SPI
see:
http://lists.denx.de/pipermail/u-boot/2012-June/126140.html
And this four were squshed to one:
[PATCH 01/20] arm/km: enable
This board is similar to portl2, but it has the u-boot environment
in a SPI NOR flash and not in an i2c eeprom like portl2 have.
Some other details:
- IVM EEPROM is at adress: pca9547:70:9
- PCI is enabled
- PIGGY4 is connected via MV88E6352 simple switch. There is no phy
between the simple
From: Valentin Longchamp valentin.longch...@keymile.com
The configuration EEPROM should be removed for P1B.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
cc: Holger Brunck holger.bru...@keymile.com
cc: Prafulla Wadaskar prafu...@marvell.com
---
changes for v2:
- nothing
From: Valentin Longchamp valentin.longch...@keymile.com
In order to be able to perform board resets without interrupting the
traffic, the configuration of an already properly configured FPGA is
skipped.
This is because some PCIe FPGAs embed some other function that must
continue to work over
From: Valentin Longchamp valentin.longch...@keymile.com
The PCIe FPGAs now have to support 2 resets: one for the non traffic
affecting part (PCIe) and one for the traffic affecting part.
When the FPGA is not reconfigured, we only reset the PCIe part.
Signed-off-by: Valentin Longchamp
From: Valentin Longchamp valentin.longch...@keymile.com
Some very similar #defines for reg addresses are used in a later patch
(managed_switch support for km_arm).
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
cc: Holger Brunck holger.bru...@keymile.com
cc: Prafulla Wadaskar
These functions tried to access two static tables before relocation
(board_early_init_f is executed before relocation). But these static
tables lie in the bss section which is not valid before relocation.
These accesses then overwrote some parts of u-boot binary before it was
relocated. For the
The additional headerfile is unneeded here, we can use the generic
km_kirkwood.h instead. And we can use the better config option
KM_PIGGY4_88E6061 for the specific features for boards with this
design in km_arm.c.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
Signed-off-by: Valentin
From: Valentin Longchamp valentin.longch...@keymile.com
This can be used if we do not want to use an EEPROM for the
configuration.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
cc: Holger Brunck holger.bru...@keymile.com
cc: Prafulla Wadaskar prafu...@marvell.com
---
changes
Use the generic header km_kirkwood.h and get rid of the
board specific header.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
cc: Prafulla Wadaskar prafu...@marvell.com
---
changes for v2:
- rebased because of changes in
From: Thomas Herzmann thomas.herzm...@keymile.com
Add a function to read the dip_switch on kmcoge5un. If the
switch is set the actual_bank is set to 0 and this SW is
booted.
Signed-off-by: Thomas Herzmann thomas.herzm...@keymile.com
Signed-off-by: Holger Brunck holger.bru...@keymile.com
cc:
From: Valentin Longchamp valentin.longch...@keymile.com
This is achieved thanks to the support read/write regs for the external
88e6352 switch. The functions for this are added into an own file
managed_switch.c. This is compiled if the define CONFIG_KM_MANAGED_SW_ADDR
was set in the board setup.
From: Valentin Longchamp valentin.longch...@keymile.com
This adds a first support of the FPGA download for a PCIe FPGA based
on the BOCO2 CPLD.
This takes place in 3 steps, all done accessing the SPICTRL reg of the
BOCO2:
1) start the FPGA config with an access to the FPGA_PROG bit
2) later in
On Tue, May 22, 2012 at 10:53 PM, Linus Walleij
linus.wall...@linaro.org wrote:
The configuration that is common for all Integrator boards may
just as well be stored in a common include file as per pattern
from other boards. This eases maintenance quite a bit.
Signed-off-by: Linus Walleij
On 06/13/2012 12:30 AM, Jan, Sebastien wrote:
Hi Tom,
On Tue, Jun 12, 2012 at 7:41 PM, Tom Rini tr...@ti.com
mailto:tr...@ti.com wrote:
On Tue, Jun 12, 2012 at 12:34 AM, Sebastien Jan s-...@ti.com
mailto:s-...@ti.com wrote:
Signed-off-by: Sebastien Jan s-...@ti.com
Hi Tom,
On Tue, Jun 12, 2012 at 7:41 PM, Tom Rini tr...@ti.com wrote:
On Tue, Jun 12, 2012 at 12:34 AM, Sebastien Jan s-...@ti.com wrote:
Signed-off-by: Sebastien Jan s-...@ti.com
Please explain what / why you are changing things here (based on docs,
testing, ?). Thanks!
Sure, sorry for
On Wed, Jun 13, 2012 at 5:03 PM, Tom Rini tr...@ti.com wrote:
On 06/13/2012 12:30 AM, Jan, Sebastien wrote:
Hi Tom,
On Tue, Jun 12, 2012 at 7:41 PM, Tom Rini tr...@ti.com
mailto:tr...@ti.com wrote:
On Tue, Jun 12, 2012 at 12:34 AM, Sebastien Jan s-...@ti.com
This reduced M,N couple corresponds to the advised value from
TI HW team.
Tested on 4460 Pandaboard, it also provides peripheral clocks
closer to the advised values.
Signed-off-by: Sebastien Jan s-...@ti.com
---
arch/arm/cpu/armv7/omap4/clocks.c |2 +-
1 file changed, 1 insertion(+), 1
On Jun 12, 2012, at 7:54 PM, Wood Scott-B07421 b07...@freescale.com wrote:
You mean to replace this tool? There are other PBL things that may need
to be done, such as reconfiguring the SPI speed so it doesn't take
forever to read out the rest of the PBL image.
My tool builds and RCW
Add LCD definitions and also a proposed binding for LCD displays.
The PWFM is in progress on the device-tree-discuss list, so only a
very basic binding is offered here.
I am not sure if it is better to have the lcd within the display
controller as with i2c/spi, or a separate node. From a
From: Mayuresh Kulkarni mkulka...@nvidia.com
Enable the Seaboard's 16-bit LCD and use it as the console.
Signed-off-by: Mayuresh Kulkarni mkulka...@nvidia.com
Signed-off-by: Simon Glass s...@chromium.org
---
include/configs/seaboard.h | 12 ++--
1 files changed, 10 insertions(+), 2
The new debugging shows the value of integers and addresses read
from the device tree.
Signed-off-by: Simon Glass s...@chromium.org
---
lib/fdtdec.c | 22 --
1 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index cc09e06..61056f1
The pulse width/frequency modulation peripheral supports generating
a repeating pulse. It is useful for controlling LCD brightness.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/armv7/tegra2/Makefile |1 +
arch/arm/cpu/armv7/tegra2/pwfm.c| 40
Add calls to the LCD driver from Nvidia board code.
Signed-off-by: Simon Glass s...@chromium.org
---
board/nvidia/common/board.c | 21 -
1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index
From: Wei Ni w...@nvidia.com
Add support for the LCD peripheral at the Tegra2 SOC level. A separate
LCD driver will use this functionality to configure the display.
Mayuresh Kulkarni:
- changes to remove bitfields and clean up for submission
Simon Glass:
- simplify code, move clock control into
Add support for adjusting the cachability of an L1 section by updating
the MMU. The mmu_set_region_dcache() function allows drivers to make
these changes after the MMU is set up.
It is implemented only for ARMv7 at present.
This is needed for LCD support, where we want to make the LCD frame
These two functions don't actually modify their arguments so add a const
keyword.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to use const in pinmux_config_pingroup/table()
arch/arm/cpu/armv7/tegra2/pinmux.c|4 ++--
The normal alignment is PAGE_SIZE, but if this is defined, we can support
other alignments.
The motivation for this change is to make the display section-aligned on
ARM so that we can easily turn off data caching for the frame buffer region
without resorting to level 2 page tables.
This provides an option for the LCD to flush the dcache after each update
(puts, scroll or clear).
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Put the LCD cache flush logic into lcd_putc() instead of lcd_puts()
common/cmd_echo.c |3 ++-
common/lcd.c | 45
The Seaboard has a 1366x768 16bpp LCD. The backlight is controlled
by one of the PWMs.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Update seaboard LCD definitions for new fdt binding
board/nvidia/dts/tegra2-seaboard.dts | 21 +
1 files changed, 21
This makes it easier to include this header from other headers.
Signed-off-by: Simon Glass s...@chromium.org
---
include/fdtdec.h |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/fdtdec.h b/include/fdtdec.h
index d7bef6c..627d077 100644
--- a/include/fdtdec.h
This driver supports driving a single LCD and providing a U-Boot console
on it.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Update LCD driver to deal with new fdt bindings
drivers/video/Makefile |1 +
drivers/video/tegra.c | 383
Add support for a default pin mapping for display1.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Use const where possible in funcmux
arch/arm/cpu/armv7/tegra2/funcmux.c | 39 +++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git
Add support for selecting the required cache mode for the LCD:
off, write-through or write-back.
Signed-off-by: Simon Glass s...@chromium.org
---
drivers/video/tegra.c |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
For tegra we want to enable the cache for the LCD. This is easier if
we can avoid using L2 page tages, so align the LCD to a section
boundary.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Align tegra display using new CONFIG_LCD_ALIGNMENT feature
When the cursor position gets to the end of the LCD console we normally
scroll by one line. This adds an option to increase that value.
Console scrolling is often slow, and if a large amount of output is
being sent, increasing this option to 10 or so will speed things up
considerably.
This series adds support for the Tegra2x's display peripheral. This
supports the LCD display on Seaboard and we use this to enable console
output in U-Boot on the LCD.
Configuration is via the device tree. Proposed bindings are included
in this series.
I looked at the message [RFC 4/4] drm: Add
This function should also be part of the GPIO API, so add it.
Signed-off-by: Simon Glass s...@chromium.org
---
include/asm-generic/gpio.h |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index
Hello Wolfgang,
On 5/30/2012 11:04 AM, Simon Glass wrote:
On Wed, May 23, 2012 at 11:58 AM, Vikram Narayanan vikram...@gmail.com
mailto:vikram...@gmail.com wrote:
Move the config file from ~/.config/patman to ~/.patman as it is
more appropriate to have it there. Update the same in
On 6/13/2012 1:22 PM, Stefano Babic wrote:
On 12/06/2012 18:37, Vikram Narayanan wrote:
Changes from v1:
Used appropriate gpio_* lib calls.
---
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Changelog must go after the --- line and commit message
Hello Marek,
On 6/13/2012 5:57 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this
patch.
--
According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
bits 4 and 5 read-only and the value is always set as zero.
So write
This is a commonly-used requirement, so add a function to support it
easily.
Signed-off-by: Simon Glass s...@chromium.org
---
include/fdtdec.h | 13 +
lib/fdtdec.c | 11 +++
2 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/include/fdtdec.h
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
I _really_ don't like ifdef -ing a lot of stuff. Instead I'd feel to
have a separate file in the directory which does this LCD init and FB
init call, and let the makefile handle the
On Wed, Jun 13, 2012 at 2:00 PM, Vikram Narayanan vikram...@gmail.com wrote:
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
I _really_ don't like ifdef -ing a lot of stuff. Instead I'd feel to have a
separate file in the directory
On 13/06/2012 19:00, Vikram Narayanan wrote:
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
But CONFIG_VIDEO is *not* set in mx53loco.h mainline. Do you mean you
are testing Fabio's patches ?
Fabio, can you give me an overview about
Dear Vikram Narayanan,
Hello Marek,
On 6/13/2012 5:57 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this
patch.
--
According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
bits 4 and 5 read-only and the
Hello Marek,
On 6/13/2012 10:45 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
Hello Marek,
On 6/13/2012 5:57 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this
patch.
--
According to REV C manual, the register
On 6/13/2012 10:50 PM, Stefano Babic wrote:
On 13/06/2012 19:00, Vikram Narayanan wrote:
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
But CONFIG_VIDEO is *not* set in mx53loco.h mainline. Do you mean you
are testing Fabio's patches
On Wed, Jun 13, 2012 at 2:20 PM, Stefano Babic sba...@denx.de wrote:
On 13/06/2012 19:00, Vikram Narayanan wrote:
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
But CONFIG_VIDEO is *not* set in mx53loco.h mainline. Do you mean you
On Wed, Jun 13, 2012 at 2:53 PM, Vikram Narayanan vikram...@gmail.com wrote:
Anyway, when patches for IPU flow into mainline, is there a good reason
to not enable CONFIG_VIDEO for mx53loco ?
Though this would be helpful for headless boards, I'm not the right guy.
Fabio can give a better
Parameters used for configuring certain SoC peripherals are parsed
from the cfg file and appended as part of the ais image's header. The
u-boot-spl.ais generated is flashed separately to the nand, so do not
delete the file after generation of u-boot.ais.
Signed-off-by: Sughosh Ganu
From: Stephen Warren swar...@nvidia.com
These variables act like loadaddr, but for a device tree image. Defining
them in the environment allows boot scripts to be identical on Tegra20 and
Tegra30, which have different memory base addresses, and hence need
different values for these variables.
From: Stephen Warren swar...@nvidia.com
bootz is just like bootm, except that it can boot a raw zImage, without
requiring it to be wrapped inside a uImage.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
include/configs/tegra2-common.h |1 +
1 files changed, 1 insertions(+), 0
From: Stephen Warren swar...@nvidia.com
cmd_bootm.c: In function 'do_bootz':
cmd_bootm.c:1590:9: warning: variable 'iflag' set but not used
[-Wunused-but-set-variable]
Cc: Marek Vasut marek.va...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Signed-off-by: Stephen Warren swar...@nvidia.com
---
I
Dear Stephen Warren,
From: Stephen Warren swar...@nvidia.com
cmd_bootm.c: In function 'do_bootz':
cmd_bootm.c:1590:9: warning: variable 'iflag' set but not used
[-Wunused-but-set-variable]
It can be applied directly too ...
Acked-by: Marek Vasut ma...@denx.de
Cc: Marek Vasut
This fix prevents env_import() CRC to fail when CONFIG_ENV_SIZE
is not equal to 4096 bytes
It also prevents mtd-read and mtd-write to be incomplete when
the environment is larger than 4096 bytes.
Signed-off-by: David du Colombier 0in...@gmail.com
---
common/env_onenand.c |2 +-
1 files
On 06/13/2012 10:19 AM, Simon Glass wrote:
This series adds support for the Tegra2x's display peripheral. This
supports the LCD display on Seaboard and we use this to enable console
output in U-Boot on the LCD.
Simon,
This series doesn't apply to u-boot-tegra/master cleanly; there are a
On 06/13/2012 04:57 PM, Stephen Warren wrote:
On 06/13/2012 10:19 AM, Simon Glass wrote:
This series adds support for the Tegra2x's display peripheral. This
supports the LCD display on Seaboard and we use this to enable console
output in U-Boot on the LCD.
Simon,
This series doesn't
On 06/13/2012 05:03 PM, Stephen Warren wrote:
On 06/13/2012 04:57 PM, Stephen Warren wrote:
On 06/13/2012 10:19 AM, Simon Glass wrote:
This series adds support for the Tegra2x's display peripheral. This
supports the LCD display on Seaboard and we use this to enable console
output in U-Boot on
This allows a watchdog reset to start the ROM's
usb/serial downloader, or boot from an sdcard.
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
Compile tested only, I don't have a mx53evk.
---
board/freescale/mx53evk/mx53evk.c | 13 +
include/configs/mx53evk.h |
This allows a watchdog reset to start the ROM's
usb downloader, or boot from an sdcard.
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
squash sabrelite
---
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 14 ++
include/configs/mx6qsabrelite.h |3 +++
2
This is useful for forcing the ROM's
usb downloader to activate upon a watchdog reset.
Or, you can boot from either SD Card.
Currently, support added for MX53 and MX6Q
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
Note: MX53 support untested.
---
From: Jim Lin ji...@nvidia.com
Add support for command line usb reset or usb start to initialize
, usb stop to stop multiple USB controllers at once.
Other commands like usb tree also support multiple controllers.
New added definitions in header file are:
CONFIG_USB_INIT_MULTI
88 matches
Mail list logo
