Hi Masahiro,
And this driver works fine when my patch
(http://patchwork.ozlabs.org/patch/276429/) applied.
Best Regards,
Sergey Kostanbaev
On Tue, Sep 24, 2013 at 5:32 AM, Masahiro Yamada
yamad...@jp.panasonic.com wrote:
commit 716f7ade104a9aeed647e19a8b8c9ed9f491359d
deleted all ep93xx SoC
Hi Masahiro,
EP93xx is not dead! I recently submit patch for full support of
edb9315a board (see http://patchwork.ozlabs.org/patch/276429/). And
it's working well on my boards and on the original evaluation board.
Best Regards,
Sergey Kostanbaev
On Tue, Sep 24, 2013 at 5:32 AM, Masahiro Yamada
Remove Prodrive pdnb3 board (including the scpu variant) support
from mainline. As its unmaintained and not needed any more for
quite some time.
Signed-off-by: Stefan Roese s...@denx.de
Cc: Martijn de Gouw martijn.de.g...@prodrive.nl
Cc: Albert Aribaud albert.u.b...@aribaud.net
---
v2:
- Rebased
Hello Jens,
Am 23.09.2013 15:50, schrieb Jens Scharsig:
Hello,
I have a access violation problem with i2c_reloc_fixup on coldfire
m68k systems.
I found out, the i2c_reloc_fixup tries to relocate the adapter itself,
but at this time i2c_adap_p is already relocated.
Which toolchain?
Can
The koelsch board has R8A7791, 2GB DDR3-SDRAM, USB,
Quad SPI, Ethernet, and more.
This patch supports the following functions:
- DDR3-SDRAM
- SCIF
- Quad SPI
- Ether
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
Signed-off-by: Hisashi Nakamura
This adds the preset value to register for R8A7791.
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
CC: Nobuhiro Iwamatsu iwama...@nigauri.org
---
drivers/serial/serial_sh.h | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/serial_sh.h
R8A7791 has the same sh-ether IP core as other SH/rmobile.
This patch adds support of R8A7791.
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
CC: Nobuhiro Iwamatsu iwama...@nigauri.org
CC: Joe Hershberger joe.hershber...@gmail.com
---
drivers/net/sh_eth.c | 5 +++--
Hi Sascha,
Thanks for your inputs.
I think you commented w.r.t old driver configurations.
Yes, I will do these changes on next versions.
On Sun, Sep 22, 2013 at 12:24 AM, Sascha Silbe t-ub...@infra-silbe.de wrote:
Jagannadha Sutradharudu Teki jagannadha.sutradharudu-t...@xilinx.com
writes:
Hi Sascha,
Yes I understand your point, this time I just refer the old code.
See the old code will also use the 4K sector erase.
May be we can modify this flag once the old gets stabilized, request
for inputs..
On Sun, Sep 22, 2013 at 12:29 AM, Sascha Silbe t-ub...@infra-silbe.de wrote:
Hi
Hello Heiko,
Hello Jens,
I have a access violation problem with i2c_reloc_fixup on coldfire
m68k systems.
I found out, the i2c_reloc_fixup tries to relocate the adapter itself,
but at this time i2c_adap_p is already relocated.
Which toolchain?
m68k-elf-gcc (Sourcery CodeBench Lite
Hello Sergey
EP93xx is not dead! I recently submit patch for full support of
edb9315a board (see http://patchwork.ozlabs.org/patch/276429/). And
it's working well on my boards and on the original evaluation board.
Sorry, I had overlooked your recently-posted patch
arm: ep9315: Return back
Hello, Sergey
And this driver works fine when my patch
(http://patchwork.ozlabs.org/patch/276429/) applied.
OK. I retract this patch along with 4/5.
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Ajay,
On Sep 24, 2013, at 11:02 AM, Ajay Bhargav wrote:
This patch add SD/MMC interface register difinitions for Armada100
series.
Signed-off-by: Ajay Bhargav ajay.bhar...@einfochips.com
---
arch/arm/include/asm/arch-armada100/armada100.h | 10 ++
1 file changed, 10
Abandon this patch.
Will upload new patch relate ECC on off config for C29XPCIE.
Best regards,
Liu Po
-Original Message-
From: Liu Po-B43644
Sent: Wednesday, August 21, 2013 2:28 PM
To: u-boot@lists.denx.de
Cc: sun york-R58495; Wood Scott-B07421; Liu Po-B43644
Subject:
Hi Ajay,
On Sep 24, 2013, at 11:02 AM, Ajay Bhargav wrote:
This patch adds support for SD card interface (MMC1 and MMC2) for
Marvell gplugD.
Signed-off-by: Ajay Bhargav ajay.bhar...@einfochips.com
---
arch/arm/include/asm/arch-armada100/cpu.h | 1 +
Hello maintainers, Sergey.
ep93xx: remove remainders of dead board
net: ep93xx_eth: remove a dead driver.
I retract these two.
cosmetic: doc: driver-model: Do not number driver lists
cosmetic: doc: UDM-serial: clean up the remainders of dead driver
cosmetic: doc: UDM-net: clean
Hi Marek,
The mass storage composite function is now compiled in only when
CONFIG_USB_GADGET_MASS_STORAGE is defined.
Such change provides binary size reduction for boards which use USB
download gadget (like am335x_evm) with DFU, but don't use UMS.
For example at am335x_evm board reduction
IFC NAND AMASK register is programmed for 64K size.
so Update TLB LAW size accordingly.
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Based upon git://git.denx.de/u-boot.git branch master
board/freescale/c29xpcie/law.c |2 +-
board/freescale/c29xpcie/tlb.c |2 +-
2
Current IFC driver supports till 4K page size NAND flash.
Add support of 8K NAND flash
- Program Spare region size in csor_ext
- Add nand_ecclayout for 4 bit 8 bit ecc
- Defines constants
- Add support of 8K NAND boot.
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Based
Tested:
Xilinx ZC702 eval board (single bus master 'I2C0' with multiplexer
PCA9548).
Write and read registers with addresses of length 0 and 1.
Note:
Mainline code does not work out of the box on ZC702 at this time; ad
hoc adaptations based on 'u-boot-xlnx' repository were needed in
To support 8 bit ECC for 8K page size NAND flash, number of ecc bytes
required are more than 128.
so increase eccpos array to support 256 entries.
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Based upon git://git.denx.de/u-boot.git branch master
include/mtd/mtd-abi.h |2
I've added this support for an S3C2416 based board over 2012.10 u-boot
sources.
Please check this patch at:
http://patchwork.ozlabs.org/patch/185885/
José Gonçalves
___
U-Boot mailing list
U-Boot@lists.denx.de
Dear Lukasz,
On 29/08/13 06:01, Lukasz Majewski wrote:
Hi Minkyu
Dear Lukasz,
On 13/08/13 06:15, Lukasz Majewski wrote:
This commit brings removal of duplicated code for UART IP block
embedded at Samsung SoCs.
New include/asm/samsung-common directory has been created to store
common
Hi Zoltan,
Did not try this myself on the MINI2416 board, so I can not give you any
hints on that.
But I'm curious, why do you need u-boot's OHCI support for that board?
Best regards,
José Gonçalves
___
U-Boot mailing list
U-Boot@lists.denx.de
Dear Simon Glass,
Hi Julius,
On Mon, Sep 23, 2013 at 8:55 PM, Julius Werner jwer...@chromium.org wrote:
Hi Simon,
It seems like you could do something like
/*
* This is the delay for ...the spec requires a minimum of ...
*/
#define SOME_SUITABLE_NAME 8000
Dear Lukasz Majewski,
Hi Marek,
The mass storage composite function is now compiled in only when
CONFIG_USB_GADGET_MASS_STORAGE is defined.
Such change provides binary size reduction for boards which use USB
download gadget (like am335x_evm) with DFU, but don't use UMS.
For
Dear Vivek Gautam,
Hi Marek,
On Mon, Sep 23, 2013 at 8:59 PM, Marek Vasut ma...@denx.de wrote:
Dear Vivek Gautam,
+ Marek, Dan, Julius, Simon and Vikas for this cover patch ;-)
[...]
Thanks, I have the patches lined up. Just waiting for Dans' talk with
Sarah. Maybe we
On Tue, Sep 24, 2013 at 12:30 PM, Marek Vasut ma...@denx.de wrote:
Dear Vivek Gautam,
Hi Marek,
On Mon, Sep 23, 2013 at 8:59 PM, Marek Vasut ma...@denx.de wrote:
Dear Vivek Gautam,
+ Marek, Dan, Julius, Simon and Vikas for this cover patch ;-)
[...]
Thanks, I have the patches
Hi,
On Sun, Sep 15, 2013 at 4:55 AM, Suriyan Ramasami suriya...@gmail.com wrote:
Hello All and especially Dan Murphy,
Reading thru the mailing list Dan seems to have worked on usb3503a +
LAN9730 enumeration wrt the OMAP5. Hence, I seek his help and anyone else!
This is with regards
On Fri, 20 Sep 2013 17:22:58 -0700
Eric Nelson eric.nel...@boundarydevices.com wrote:
On 09/16/2013 02:26 PM, Eric Nelson wrote:
This patch set begins the process of consolidating mux and pad
declarations for the i.MX6 Dual/Quad and Dual-Lite/Solo processor
variants.
Patch 1 replaces
Hi Minkyu,
Dear Lukasz,
On 29/08/13 06:01, Lukasz Majewski wrote:
Hi Minkyu
Dear Lukasz,
On 13/08/13 06:15, Lukasz Majewski wrote:
This commit brings removal of duplicated code for UART IP block
embedded at Samsung SoCs.
New include/asm/samsung-common directory has been
NAND,CPLD AMASK register is programmed for 64K size.
so Update TLB LAW size accordingly.
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Based upon git://git.denx.de/u-boot.git branch master
changes for v2:
- Updated both CPLD and NAND
board/freescale/c29xpcie/law.c |
On Sun, Sep 22, 2013 at 12:21 AM, Sascha Silbe t-ub...@infra-silbe.de wrote:
Hi Jagannadha,
Jagannadha Sutradharudu Teki jagannadha.sutradharudu-t...@xilinx.com
writes:
Added new spi_flash_probe support, currently added N25Q*
flash part attributes support.
[...]
I've given your series
Hi Albert,
On 09/23/2013 04:37 PM, Albert ARIBAUD wrote:
Hi Michal,
On Mon, 23 Sep 2013 16:19:52 +0200, Michal Simek mon...@monstr.eu
wrote:
On 09/23/2013 02:31 PM, Albert ARIBAUD wrote:
Hi Michal,
On Thu, 22 Aug 2013 14:52:02 +0200, Michal Simek
michal.si...@xilinx.com wrote:
Zynq
Dear Marek Vasut,
On 19/09/13 23:34, Marek Vasut wrote:
Dear Marek Vasut,
Dear Marek Vasut,
Dear Mateusz Zalega,
This commit unifies board-specific USB initialization implementations
under one symbol (usb_board_init), declaration of which is available in
usb.h.
New API allows
When we call do_bootm() with a vmlinuz, this would lead to a NULL
pointer dereference, and after talking with Wolfgang the right thing to
do here for now is to make sure that we pass cmdtp to these functions
rather than NULL.
Reported-by: Steven A. Falco stevenfa...@gmail.com
Signed-off-by: Tom
Dear Minkyu Kang,
Dear Marek Vasut,
On 19/09/13 23:34, Marek Vasut wrote:
Dear Marek Vasut,
Dear Marek Vasut,
Dear Mateusz Zalega,
This commit unifies board-specific USB initialization implementations
under one symbol (usb_board_init), declaration of which is available
in
Signed-off-by: Tom Rini tr...@ti.com
---
include/configs/am335x_evm.h |8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index cdf689f..f0d1663 100644
--- a/include/configs/am335x_evm.h
+++
Thanks Tapani,
On 09/24/2013 02:36 AM, Tapani Utriainen wrote:
On Fri, 20 Sep 2013 17:22:58 -0700
Eric Nelson eric.nel...@boundarydevices.com wrote:
On 09/16/2013 02:26 PM, Eric Nelson wrote:
This patch set begins the process of consolidating mux and pad
declarations for the i.MX6 Dual/Quad
Hi,
I am facing the typical problem relating to prints in the do_irq handler of
versatile based u-boot. I dont know what is the problem. Though i am
getting the prints normally in super visor context but not able to get the
prints in the interrupt context. Please can you tell me if it is
This patch add support for new multi function pmic max77693.
The driver is split into three modules: pmic, muic and fuelgage.
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Changes for V2:
-
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Fabio Estevam fabio.este...@freescale.com
Cc: Otavio
Hi,
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Fabio Estevam fabio.este...@freescale.com
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Signed-off-by: Marek Vasut
Adding Freeze Controller driver. All HPS IOs need to be
in freeze state during pin mux or IO buffer configuration.
It is to avoid any glitch which might happen
during the configuration from propagating to external devices.
Signed-off-by: Chin Liang See cl...@altera.com
Cc: Wolfgang Denk
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
On Tue, Sep 24, 2013 at 11:51 AM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams
Sorry, Michal
I only wrote that part to explain how I was able to test on the
ZC702 board (in case somebody else should want to reproduce
the results).
I understand that you will sync the 'u-boot-xlnx' repo with mainline
at some time in the future, on your own schedule. I was not trying
to
On Tue, Sep 24, 2013 at 09:06:42AM -0400, Tom Rini wrote:
When we call do_bootm() with a vmlinuz, this would lead to a NULL
pointer dereference, and after talking with Wolfgang the right thing to
do here for now is to make sure that we pass cmdtp to these functions
rather than NULL.
On Mon, 2013-09-23 at 13:59 -0500, Dinh Nguyen wrote:
On Fri, 2013-09-20 at 00:08 -0500, Chin Liang See wrote:
diff --git a/arch/arm/cpu/armv7/socfpga/freeze_controller.c
b/arch/arm/cpu/armv7/socfpga/freeze_controller.c
new file mode 100644
index 000..93ad22a
--- /dev/null
+++
On Wed, Sep 11, 2013 at 04:38:45PM +0530, Dani Krishna Mohan wrote:
This patch set adds I2S-0 support and retains I2S-1 support.
The default i2s channel can be selected through DT.
Changes in V3:
- Followed proper indentations
Changes in V2:
- Enabled I2S-0 support through
On Wed, Sep 11, 2013 at 04:38:45PM +0530, Dani Krishna Mohan wrote:
This patch set adds I2S-0 support and retains I2S-1 support.
The default i2s channel can be selected through DT.
Changes in V3:
- Followed proper indentations
Changes in V2:
- Enabled I2S-0 support through
On 09/24/2013 04:58 PM, Michael Burr wrote:
Sorry, Michal
I only wrote that part to explain how I was able to test on the
ZC702 board (in case somebody else should want to reproduce
the results).
I understand that you will sync the 'u-boot-xlnx' repo with mainline
at some time in the
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:51 AM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to
On Tue, Sep 24, 2013 at 12:24 PM, Marek Vasut ma...@denx.de wrote:
+The production of BootStream image is handled via mkimage, which is
+also part of the U-Boot source tree. The mkimage requires OpenSSL
+development libraries to be installed. In case of Debian and derivates,
+this is installed
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Fabio Estevam fabio.este...@freescale.com
Cc: Otavio
On Mon, Sep 23, 2013 at 02:33:33PM -0400, Tom Rini wrote:
In 5c427e4 we pass BOOTM_STATE_OS_CMDLINE as part of the bootm states to
run, on all arches. However, this is only valid / useful on PowerPC and
MIPS, and causes a problem on ARM where we specifically do not use it.
Rather than make
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Fabio Estevam fabio.este...@freescale.com
Cc: Otavio
Dear Bo Shen,
When unbind the gadget driver, need call disconnect first.
Signed-off-by: Bo Shen voice.s...@atmel.com
Applied, thanks
Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists.denx.de
Dear Dan Murphy,
Marek
On 09/23/2013 10:29 AM, Marek Vasut wrote:
Dear Vivek Gautam,
+ Marek, Dan, Julius, Simon and Vikas for this cover patch ;-)
[...]
Thanks, I have the patches lined up. Just waiting for Dans' talk with
Sarah. Maybe we should put her on CC too next time
Oh, OK. I see what you mean. I'm still very new to this process,
so it takes some practice to learn the customs. Thanks for
clarifying.
So, in future I will keep those explanations below the --- line.
Michael Burr // Software Engineer II
Logic PD
T // 612.436.7273
NOTICE: Important
Thanks Vivek for your response!
On Tue, Sep 24, 2013 at 2:10 AM, Vivek Gautam gautamvivek1...@gmail.com wrote:
Hi,
On Sun, Sep 15, 2013 at 4:55 AM, Suriyan Ramasami suriya...@gmail.com wrote:
Hello All and especially Dan Murphy,
Reading thru the mailing list Dan seems to have worked on
On Tue, Sep 24, 2013 at 12:39 PM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Signed-off-by: Marek Vasut
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 12:39 PM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
of the elftosb tool. This cuts out another obscure dependency.
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 12:25 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:51 AM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that
Fixed bug with alen == 0 in 'i2c_write', 'i2c_read'
Further minor corrections:
Write 'address' register before 'data' register.
Write 'transfer_size' register before 'address' register.
Tested:
Xilinx ZC702 eval board.
Write and read registers with addresses of length 0 and 1.
Signed-off-by:
On Tue, Sep 24, 2013 at 1:28 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 12:39 PM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to generate the BootStreams instead
On Tue, Sep 24, 2013 at 12:25 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:51 AM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 11:40 AM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 1:28 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Tue, Sep 24, 2013 at 12:39 PM, Marek Vasut ma...@denx.de wrote:
Now that mkimage can generate an BootStream for i.MX23 and i.MX28,
use the mkimage as a default tool to
The EHCI controller has some very specific requirements for the USB 2.0
port test modes, which were not closely followed in the initial test
mode commit. It demands that the host controller is completely shut down
(all ports suspended, Run/Stop bit unset) when activating test mode, and
will not
Added SST25* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
Tested-by: Eric Nelson
Added proper comment style on spi_flash structure to make
more readable.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
include/spi_flash.h | 63
Divided the spi_flash framework into mutiple parts for
- spi_flash.c:
spi flash core file, interaction for spi/qspi driver to
spi_flash framework.
- spi_flash_ops.c
spi flash preffered operations, erase,write and read.
- spi_flash_probe.c
spi flash probing, easy to
Add support for Spansion S25FL256S_256K SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_probe.c | 3 ++-
1 file changed, 2 insertions(+), 1
Added AT45DB* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
-
This patch provides support to set the quad enable bit on flash.
quad enable bit needs to set before performing any quad IO
operations on respective SPI flashes.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Given proper spacing between flash table params.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_probe.c | 154 +++---
1 file
Added new spi_flash_probe support, currently added N25Q*
flash part attributes support.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Defined CONFIG_SPI_FLASH_LEGACY for old probing style
which is available on
Added W25* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
-
Moved BAR config to spi_flash_validate_ids, so its
better to have all flash initalization at once.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_internal.h
Add support for Spansion S25FL512S_256K SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_probe.c | 1 +
1 file changed, 1 insertion(+)
diff --git
Add support for EON EN25Q64 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_probe.c | 1 +
1 file changed, 1 insertion(+)
diff --git
Added MX25L* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
-
Added S25FL* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
-
From Micron, 512MB onwards, flash requires to poll flag status
instead of read status- hence added E_FSR flag on spectific
flash parts.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
Most of the SST flashes needs to write up using SST_WP, AAI
Word Program, so added a flag param on spi_flash_params table.
SST flashes, which supports SST_WP need to use a WP write
sst_write_wp instead of common flash write.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_internal.h | 5 -
drivers/mtd/spi/spi_flash_ops.c | 2 +-
2 files changed, 1 insertion(+), 6
Added EN25Q* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
-
More cleanups on spi_flash side:
- Removed unneeded comments.
- Rearranged macros in proper location.
- Rearranged func declerations
- Renamed few function names.
- Added License headers.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for
Current sf uses FAST_READ command, this patch adds support to
use the different/extended read command.
This implementation will determine the fastest command by taking
the supported commands from the flash and the controller,
controller is always been a priority.
Signed-off-by: Jagannadha
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_internal.h | 3 --
drivers/mtd/spi/spi_flash_probe.c| 56 +++-
Included erase_size while printing probed flash details.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_probe.c | 3 ++-
1 file changed, 2 insertions(+), 1
SECT_4K, SECT_32K and SECT_64K opeartions are performed to
to specific flash by adding a SECT* flag on respective
spi_flash_params.flag param.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
-
Add support for Macronix MX25L51235F SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash_probe.c | 1 +
1 file changed, 1 insertion(+)
diff --git
Added M25P* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size of flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
This patch series is a combination of
sf: Add common probe support
sf: Add support for extended/quad read and write commands
http://www.mail-archive.com/u-boot@lists.denx.de/msg121668.html
Added a support for common probe, hence removed removed
spi_flash_do_alloc reference.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
include/spi_flash.h | 38
- Rearranged multi-line comment style.
- Add tabs.
- Add spaces.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- none
include/spi.h | 99
Few of the flashes(Atmel, Macronix and SST) require to
clear BP# bits in flash power ups.
So clear these BP# bits at probe time, so-that the flash
is ready for user operations.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Changes for v3:
1 - 100 of 121 matches
Mail list logo
