Hi Marek,
On Saturday, February 01, 2014 at 10:56:27 AM, Lukasz Majewski wrote:
On Sat, 1 Feb 2014 03:50:26 +0100
Marek Vasut ma...@denx.de wrote:
On Friday, January 31, 2014 at 01:16:25 PM, Lukasz Majewski wrote:
A set of cache operations (both invalidation and flush) were
Dear Wolfgang Denk,
On 23/01/14 19:28, Wolfgang Denk wrote:
Dear Piotr Wilczek,
In message 1390402477-24340-2-git-send-email-p.wilc...@samsung.com you
wrote:
This patch enables to read cpu revision on Exynos CPU.
Sorry, you really need to refactor your patches.
In this commit you
Hi Simon,
On 02/01/2014 01:28 AM, Simon Glass wrote:
+U-Boot (good to copy the list)
yes, sure.
Hi Michal,
On 28 January 2014 06:23, Michal Simek mon...@monstr.eu wrote:
Hi Simon,
hope that you are good.
IRC you mentioned at u-boot minisummit that you are enabling
FIT support for
Hi Stephen,
(Sorry for the spam; resending with the correct U-Boot mailing list
in CC)
On 02/01/2014 11:14 PM, Stephen Warren wrote:
Oleksandr, I'm starting to look at getting USB support enabled for
the Raspberry Pi in mainline U-Boot. To that end, I looked at:
Changes:
1. L2 cache is being invalidated by Boot ROM code for e6500 core.
So removing the invalidation from start.S
2. Clear the LAW and corresponding configuration for CPC. Boot ROM
code uses it as hosekeeping area.
3. For Secure boot, CPC is configured as SRAM and used as house
keeping
Changes:
1. L2 cache is being invalidated by Boot ROM code for e6500 core.
So removing the invalidation from start.S
2. Clear the LAW and corresponding configuration for CPC. Boot ROM
code uses it as hosekeeping area.
3. For Secure boot, CPC is configured as SRAM and used as house
keeping
-Original Message-
From: Wood Scott-B07421
Sent: Wednesday, January 29, 2014 2:38 AM
To: Bansal Aneesh-B39320
Cc: u-boot@lists.denx.de; Sun York-R58495
Subject: Re: [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround
for IFC errata A003399
On Sun, 2014-01-26 at 23:27
Hi Marek,
On Saturday, February 01, 2014 at 12:05:29 PM, Lukasz Majewski wrote:
On Sat, 1 Feb 2014 03:55:20 +0100
Marek Vasut ma...@denx.de wrote:
On Friday, January 31, 2014 at 01:16:27 PM, Lukasz Majewski wrote:
The Samsung's UDC driver is not anymore copying data from USB
Acked-by: Jaehoon Chung jh80.ch...@samsung.com
On 01/29/2014 05:04 PM, Minkyu Kang wrote:
Because of the list of peripherals is not sequential,
such a routine does not check for valid correctly.
Error check will be done when call the exynos_pinmux_config function.
Signed-off-by: Minkyu Kang
Hi Marek,
sorry for late answer.
On 28/01/2014 20:32, Marek Vasut wrote:
On Tuesday, January 28, 2014 at 04:06:12 PM, Stefano Babic wrote:
Hi Marek,
On 24/01/2014 16:25, Marek Vasut wrote:
Add a callback so that a board can implement it's own specific routine to
toggle the port's nRESET
Hi Tim,
On 01/02/2014 20:49, Tim Harvey wrote:
Signed-off-by: Tim Harvey thar...@gateworks.com
---
drivers/power/pmic/Makefile| 1 +
drivers/power/pmic/pmic_pfuze100.c | 42 +
include/power/pfuze100_pmic.h | 96
++
3 files
After a successful booting in SPI-NOR(FUSE) mode I would like to boot the
same board in INTERNAL mode i.e Serial download mode.Can anyone suggest me
commands and steps to achieve the same?
___
U-Boot mailing list
U-Boot@lists.denx.de
Add spl_sata to read a fat partition from a bootable SATA
drive.
Signed-off-by: Dan Murphy dmur...@ti.com
---
v2 - Removed debug print - http://patchwork.ozlabs.org/patch/314811/
common/Makefile |3 +++
common/cmd_scsi.c |2 ++
common/spl/Makefile |1 +
common/spl/spl.c
Add the SATA boot support for OMAP5 and dra7xx.
Renamed the omap_sata_init to the common init_sata(int dev)
for commonality in with sata stack.
Added the ROM boot device ID for SATA.
Signed-off-by: Dan Murphy dmur...@ti.com
---
v2 - Removed omap_sata_init from header -
Just extend tables with this new device.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
board/xilinx/zynq/board.c | 4
include/zynqpl.h | 5 +
2 files changed, 9 insertions(+)
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index a5b9bde..5a47149
changes to omap24_i2c_write(...) for polling ARDY Bit from IRQ-Status.
Otherwise on a subsequent call the transfer of last byte from the
predecessor is aborted and therefore lost. For exmaple when
i2c_write(...) is followed by a i2c_setspeed(...) (which has to
deactivate and activate master for
These are header files used by ARC700 architecture.
Also note that arch-arc700/hardware.h is only required for compilation of
designware_i2c driver which refers to asm/arch/hardware.h.
It would be good to fix mentioned driver sometime soon but it will cause
changes in ARM board configs that use
This patch series adds support for the Synopsys DesignWare ARC700 architecture.
DesignWare ARC700 is family of 32-bit CPUs developed by Synopsys, Inc.
Since version 3.9 ARC architecture is supported in mainline Linux developemnt.
And now to get better support in commonly used boot-loader we are
These are library functions used by ARC700 architecture.
Following files were borrowed from Linux kernel sources,
commit 5ee54f38171b9b3541c5e9cf9c3a9e53455fd8b4 (Linux 3.11.10):
* memcmp.S
* memcpy-700.S
* memset.S
* strchr-700.S
* strcmp.S
* strcpy-700.S
* strlen.S
Signed-off-by:
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Francois Bedard fbed...@synopsys.com
Cc: Wolfgang Denk w...@denx.de
Cc: Heiko Schocher h...@denx.de
---
Changes for v3:
* Added inclusion of u-boot-arc.h in common.h.
common/cmd_bdinfo.c | 18
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Francois Bedard fbed...@synopsys.com
Cc: Wolfgang Denk w...@denx.de
Cc: Heiko Schocher h...@denx.de
---
Changes for v3:
* Fixed checkpatch.pl errors.
* All AUX regs were moved into one header.
*
AXS101 is a new generation of devlopment boards from Synopsys that houses
ASIC with ARC700 and lots of DesignWare peripherals:
* DW APB UART
* DW Mobile Storage (MMC/SD)
* DW I2C
* DW GMAC
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Francois
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Francois Bedard fbed...@synopsys.com
Cc: Wolfgang Denk w...@denx.de
Cc: Heiko Schocher h...@denx.de
---
No changes for v3.
doc/README.ARC | 27 +++
1 file changed, 27
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Francois Bedard fbed...@synopsys.com
Cc: Wolfgang Denk w...@denx.de
Cc: Heiko Schocher h...@denx.de
---
No changes for v3.
MAKEALL | 6 ++
1 file changed, 6 insertions(+)
diff --git a/MAKEALL
Arcangel4 is a FPGA-based development board that is used for prototyping and
verification of of both ARC hardware (CPUs) and software running upon CPU.
Prerequisite is http://patchwork.ozlabs.org/patch/300901/
This board avaialble in 2 flavours:
* Little-endian (arcangel4)
* Big-endian
Adds support for set-speed on the OMAP24xx I2C Adapter.
Changes to omap24_i2c_write(...) for polling ARDY Bit from IRQ-Status.
Otherwise on a subsequent call the transfer of last byte from the
predecessor is aborted and therefore lost. For exmaple when
i2c_write(...) is followed by a
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Francois Bedard fbed...@synopsys.com
Cc: Wolfgang Denk w...@denx.de
Cc: Heiko Schocher h...@denx.de
---
No changes for v3.
examples/standalone/stubs.c | 13 +
1 file changed, 13
On 02/03/2014 01:23 AM, Lukasz Majewski wrote:
Hi Stephen,
(Sorry for the spam; resending with the correct U-Boot mailing list
in CC)
On 02/01/2014 11:14 PM, Stephen Warren wrote:
Oleksandr, I'm starting to look at getting USB support enabled for
the Raspberry Pi in mainline U-Boot. To
Tom,
The following changes since commit 07e2822d158940a0e8ba45b6ab0344ffa1011a07:
board: nios2: Check if flash is configured before calling
early_flash_cmd_reset() (2014-01-29 16:44:18 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to
On Monday, February 03, 2014 at 09:05:06 AM, Lukasz Majewski wrote:
[...]
To sum up:
1. s3c_udc_ep0_zlp - EP0 ZLP packets don't need to invalidate the
cache (since it is zero length transmission)
2. s3c_udc_pre_setup - cache invalidation is not needed when I setup
buffer
On Monday, February 03, 2014 at 12:56:04 PM, Stefano Babic wrote:
Hi Marek,
sorry for late answer.
On 28/01/2014 20:32, Marek Vasut wrote:
On Tuesday, January 28, 2014 at 04:06:12 PM, Stefano Babic wrote:
Hi Marek,
On 24/01/2014 16:25, Marek Vasut wrote:
Add a callback so that a
On Monday, February 03, 2014 at 12:06:59 PM, Lukasz Majewski wrote:
Hi Marek,
On Saturday, February 01, 2014 at 12:05:29 PM, Lukasz Majewski wrote:
On Sat, 1 Feb 2014 03:55:20 +0100
Marek Vasut ma...@denx.de wrote:
On Friday, January 31, 2014 at 01:16:27 PM, Lukasz Majewski
Hi Marek,
On 02/03/2014 11:17 AM, Marek Vasut wrote:
On Monday, February 03, 2014 at 12:56:04 PM, Stefano Babic wrote:
Hi Marek,
sorry for late answer.
On 28/01/2014 20:32, Marek Vasut wrote:
On Tuesday, January 28, 2014 at 04:06:12 PM, Stefano Babic wrote:
Hi Marek,
On 24/01/2014 16:25,
Dear Aneesh Bansal,
In message 1391419033-14283-1-git-send-email-aneesh.ban...@freescale.com you
wrote:
Changes:
1. L2 cache is being invalidated by Boot ROM code for e6500 core.
So removing the invalidation from start.S
2. Clear the LAW and corresponding configuration for CPC. Boot ROM
Dear Hannes,
In message 1391444250-29430-1-git-send-email-oe5...@oevsv.at you wrote:
changes to omap24_i2c_write(...) for polling ARDY Bit from IRQ-Status.
Otherwise on a subsequent call the transfer of last byte from the
predecessor is aborted and therefore lost. For exmaple when
Dear Alexey Brodkin,
In message 1391445368-10545-7-git-send-email-abrod...@synopsys.com you wrote:
Arcangel4 is a FPGA-based development board that is used for prototyping and
verification of of both ARC hardware (CPUs) and software running upon CPU.
Prerequisite is
Dear Alexey,
In message 1391445368-10545-8-git-send-email-abrod...@synopsys.com you wrote:
AXS101 is a new generation of devlopment boards from Synopsys that houses
ASIC with ARC700 and lots of DesignWare peripherals:
...
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x200)
On Mon, Feb 3, 2014 at 4:05 AM, Stefano Babic sba...@denx.de wrote:
Hi Tim,
On 01/02/2014 20:49, Tim Harvey wrote:
Signed-off-by: Tim Harvey thar...@gateworks.com
---
drivers/power/pmic/Makefile| 1 +
drivers/power/pmic/pmic_pfuze100.c | 42 +
On Monday, February 03, 2014 at 07:40:09 PM, Eric Nelson wrote:
[...]
Well ... SL and N6X both. For all I care, we can have #define
MX6_PCIE_RESET_GPIO and if that's not defined, puke out this warning. And
ultimatelly let this function be overriden anyway in case people used
some GPIO
Hi
Il 01/feb/2014 20:51 Tim Harvey thar...@gateworks.com ha scritto:
Signed-off-by: Tim Harvey thar...@gateworks.com
---
drivers/power/pmic/Makefile| 1 +
drivers/power/pmic/pmic_pfuze100.c | 42 +
include/power/pfuze100_pmic.h | 96
Hello Wolfgang,
On Mon, 2014-02-03 at 20:15 +0100, Wolfgang Denk wrote:
Dear Alexey Brodkin,
In message 1391445368-10545-7-git-send-email-abrod...@synopsys.com you
wrote:
Arcangel4 is a FPGA-based development board that is used for prototyping and
verification of of both ARC hardware
Hello Wolfgang,
On Mon, 2014-02-03 at 20:19 +0100, Wolfgang Denk wrote:
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C1
+#define CONFIG_DW_I2C 1
...
+#define CONFIG_I2C_MULTI_BUS 1
...
Please do not define values for
Hi Marek,
On 02/03/2014 12:33 PM, Marek Vasut wrote:
On Monday, February 03, 2014 at 07:40:09 PM, Eric Nelson wrote:
[...]
Well ... SL and N6X both. For all I care, we can have #define
MX6_PCIE_RESET_GPIO and if that's not defined, puke out this warning. And
ultimatelly let this function be
On 01/24/2014 04:21 AM, Prabhakar Kushwaha wrote:
T1040 has only one SerDes block. so update the code accordingly.
Also, add support of SerDes Protocol 0x00, 0x06, 0x40, 0x69 0x85,
0xA7 and 0xAA
Signed-off-by: Arpit Goel b44...@freescale.com
Signed-off-by: Poonam Aggrwal
Hi Marek,
On 03/02/2014 19:17, Marek Vasut wrote:
Well ... SL and N6X both. For all I care, we can have #define
MX6_PCIE_RESET_GPIO and if that's not defined, puke out this warning. And
ultimatelly let this function be overriden anyway in case people used some GPIO
expander or whatnot. So the
On 01/27/2014 02:25 AM, Prabhakar Kushwaha wrote:
Enable entherent for T1040QDS. It enables FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5
- Define MDIO related configs
- Added eth.c file
- Update t1040.c to support RGMII and SGMII
- Update t1040qds.c to support ethernet
- Define the PHY address
On 01/24/2014 11:23 PM, Prabhakar Kushwaha wrote:
Current print only display width of PCIe device. Add print to display
PCIe generation supported by the device.
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Applied to u-boot-mpc85xx master branch.
York
On 01/27/2014 12:37 AM, Priyanka Jain wrote:
-Add usb2 node entry in hwconfig string
-Remove controller interleaving from hwconfig string as T1040
has only one DDR conroller
-SPI related macros which were earlier under #ifdef CONFIG_SPIFLASH
are move outside so that they are defined for
On 01/23/2014 12:54 PM, Poonam Aggrwal wrote:
Removed LIODNs for RMAN, RIO, 10G. T1040 has 10 QMAN portals so assigned
LIODNs accordingly.
Signed-off-by: Poonam Aggrwal poonam.aggr...@freescale.com
---
Applied to u-boot-mpc85xx master branch.
York
On 01/27/2014 01:11 AM, Prabhakar Kushwaha wrote:
-Add usb2 node entry in hwconfig string
-Remove controller interleaving from hwconfig string as T1040
has only one DDR conroller
-SPI related macros which were earlier under #ifdef CONFIG_SPIFLASH
are move outside so that they are
On 01/24/2014 10:41 PM, Prabhakar Kushwaha wrote:
Due to increased size of u-boot, FMAN ucode start address has been shifted
by 256KB causing a overlap with rootfs start address.
Update rootfs start address to reflect correct memory map.
Also fix minor typo in README
Signed-off-by:
On Monday, February 03, 2014 at 08:57:30 PM, Eric Nelson wrote:
[...]
6.6.1. Conventional Reset
Conventional Reset includes all reset mechanisms other than Function
Level Reset. There are two categories of Conventional Resets:
Fundamental Reset and resets that are not Fundamental
On 01/29/2014 10:00 PM, Priyanka Jain wrote:
This covers only non-L2 switch ethernet interfaces i.e.
RGMII and SGMII interface for both
-T1040RDB
-T1042RDB_PI
T1040RDB is configured as serdes protocol 0x66 which can
support following interfaces
-2 RGMIIS on DTSEC4, DTSEC5
-1 SGMII on
On 01/27/2014 01:51 AM, Nikhil Badola wrote:
Define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE macro for enabling dual
phy in t1040
Signed-off-by: Nikhil Badola nikhil.bad...@freescale.com
Applied to u-boot-mpc85xx master branch.
York
___
U-Boot
On 01/31/2014 05:03 PM, Simon Glass wrote:
Hi Stephen,
On 27 January 2014 13:49, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
do_test() currently uses strcmp() twice to determine which operator is
present; once to determine how many arguments the
From: Stephen Warren swar...@nvidia.com
Fix a few issues with the generic save shell command, and fs_write()
function.
1) fstypes[].write wasn't filled in for some file-systems, and isn't
checked when used, which could cause crashes/... if executing save
on e.g. fat/ext filesystems.
2)
From: Stephen Warren swar...@nvidia.com
This better mirrors the behaviour of bash, for example:
$ if test -z = -z; then echo yes; else echo no; fi
yes
This is parsed as a string comparison of -z and -z, since the check
for the binary = operator occurs first. Without this change, the
command
From: Stephen Warren swar...@nvidia.com
FAT and ext4 expect that the passed in block device descriptor not be
NULL. This causes problems on sandbox, where get_device_and_partition()
succeeds for the host device, yet passes back a NULL device descriptor.
Add special handling for this situation, so
From: Stephen Warren swar...@nvidia.com
This emulates bash:
$ if test; then echo yes; else echo no; fi
no
Currently, the code sets expr = -1 in this case, which gets mapped to
0 (true) at the end of do_test() by the logical - shell exit code
conversion.
Signed-off-by: Stephen Warren
From: Stephen Warren swar...@nvidia.com
Since the generic ls command no longer segfaults sandbox, enable it.
Signed-off-by: Stephen Warren swar...@nvidia.com
Acked-by: Simon Glass s...@chromium.org
---
v4: No change.
v3: New patch.
---
include/configs/sandbox.h | 1 +
1 file changed, 1
From: Stephen Warren swar...@nvidia.com
This could be used in scripts such as:
if test -e mmc 0:1 /boot/boot.scr; then
load mmc 0:1 ${scriptaddr} /boot/boot.scr
source ${scriptaddr}
fi
rather than:
if load mmc 0:1 ${scriptaddr} /boot/boot.scr; then
source ${scriptaddr}
fi
This
From: Stephen Warren swar...@nvidia.com
This is much like a regular shell's -e operator, except that it takes
multiple arguments to specify the device type and device/partition ID
in addition to the usual filename:
if test -e mmc 0:1 /boot/boot.scr; then echo yes; else echo no; fi
From: Stephen Warren swar...@nvidia.com
Currently, ! can only be parsed as the first operator in an expression.
This prevents the following from working:
$ if test ! ! 1 -eq 1; then echo yes; else echo no; fi
yes
$ if test ! 1 -eq 2 -a ! 3 -eq 4; then echo yes; else echo no; fi
yes
Fix this by
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
According to the errata, some bits of an undocumented register in the
DCSR must be set for every core in order to avoid a possible data or
instruction corruption.
This is required for the 2.0 revision of the P2041 that should be used
as soon
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
From: Rainer Boschung rainer.bosch...@keymile.com
- make use of the QRIO1 32bit register at 0x20 as bootcounter register
- check for BOOTCOUNT_MAGIC pattern when before bootcounter value is read
Signed-off-by: Rainer Boschung
From: Stephen Warren swar...@nvidia.com
This hooks into the generic file exists support added in an earlier
patch, and provides an implementation for the sandbox test environment.
Signed-off-by: Stephen Warren swar...@nvidia.com
Acked-by: Simon Glass s...@chromium.org
---
v4: No change.
v3:
*
From: Stephen Warren swar...@nvidia.com
This hooks into the generic file exists support added in an earlier
patch, and provides an implementation for the ext4 filesystem.
Signed-off-by: Stephen Warren swar...@nvidia.com
Acked-by: Simon Glass s...@chromium.org
---
v4: No change.
v3: Invert return
From: Stephen Warren swar...@nvidia.com
This hooks into the generic file exists support added in an earlier
patch, and provides an implementation for the FAT filesystem.
Signed-off-by: Stephen Warren swar...@nvidia.com
Acked-by: Simon Glass s...@chromium.org
---
v4: No change.
v3:
* s/ext/fat/
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
The QRIO GPIO functions can be of general interest. They are thus added
to a qrio.c and their prototype are available from kmp204x.h. The QRIO
prst function are also included in this file, as well as the functions
required for the I2C
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
On the previous HW revision (now unsupported), there was a need for
external DMA signals and thus the I2C3/4 signals were used
DMA1_DONE/ACK/REQ.
These signals now are configured as GPIO[16:19].
Signed-off-by: Valentin Longchamp
Adds support for set-speed on the OMAP24xx I2C Adapter.
Changes to omap24_i2c_write(...) for polling ARDY Bit from IRQ-Status.
Otherwise on a subsequent call the transfer of last byte from the
predecessor is aborted and therefore lost. For exmaple when
i2c_write(...) is followed by a
From: Stephen Warren swar...@nvidia.com
I recently re-wrote cmd_test() to add new features. Add a bunch of unit-
tests to make sure I didn't break anything.
Suggested-by: Simon Glass s...@chromium.org
Signed-off-by: Stephen Warren swar...@nvidia.com
---
This patch depends on my 12-entry patch
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
The kmcoge4 board is the product board derived from the kmlion1
prototype. The main difference between the 2 boards is that the kmcoge4
does not configure the Local Bus controller for LCS2.
Signed-off-by: Valentin Longchamp
From: Stephen Warren swar...@nvidia.com
env default -f doesn't work any more; replace it with
env default -f -a. This avoids the following when running the ut
command:
do_ut_cmd: Testing commands
env - environment handling commands
Usage:
env default [-f] -a - [forcibly] reset default
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
The PEXHC PCIe configuration mechanism ensures that the FPGA get
configured at power-up. Since all the PCIe devices should be configured
when the kernel start, u-boot has to take care that the FPGA gets
configured also in other reset scenarios,
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
This define can be used if the ubi boot partition (defined for all
Keymile boards with KM_UBI_PARTITION_NAME_BOOT #define to ubi0) needs
some additionnal boot options.
This is the case for the kmp204x boards since u-boot does not support
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
The new prototype and the final series was moved from Micron to Spansion
to have a better reset sequence that is easier to support.
Signed-off-by: Valentin Longchamp valentin.longch...@keymile.com
---
Changes in v2: None
Applied to
On 02/02/2014 11:45 PM, Valentin Longchamp wrote:
From: Rainer Boschung rainer.bosch...@keymile.com
This patch adds support for using some GPIOs that are connected to the
I2C bus to force the bus lines state and perform some bus deblocking
sequences.
The KM common deblocking algorithm
On 01/17/2014 10:58 PM, Prabhakar Kushwaha wrote:
IFC registers can be of type Little Endian or big Endian depending upon
Freescale SoC. Here SoC defines the register type of IFC IP.
So update acessor functions with common IFC acessor functions to take care
both type of endianness.
From: Stephen Warren swar...@nvidia.com
do_test() currently uses strcmp() twice to determine which operator is
present; once to determine how many arguments the operator needs, then
a second time to actually decode the operator and implement it.
Rewrite the code so that a table lookup is used to
Hi Stephen,
On 3 February 2014 13:19, Stephen Warren swar...@wwwdotorg.org wrote:
On 01/31/2014 05:03 PM, Simon Glass wrote:
Hi Stephen,
On 27 January 2014 13:49, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
do_test() currently uses strcmp()
On 01/27/2014 01:51 AM, Nikhil Badola wrote:
Define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE macro for enabling dual
phy in t1040
Signed-off-by: Nikhil Badola nikhil.bad...@freescale.com
Applied to u-boot-mpc85xx master branch.
York
___
U-Boot
Add a callback so that a board can implement it's own specific routine to
toggle the port's #PERST line or #define a GPIO to do so.
Signed-off-by: Marek Vasut ma...@denx.de
---
drivers/pci/pcie_imx.c | 47 ---
1 file changed, 44 insertions(+), 3
Hi Marek,
On 02/03/2014 01:16 PM, Marek Vasut wrote:
On Monday, February 03, 2014 at 08:57:30 PM, Eric Nelson wrote:
[...]
I like having this bit included, but do you need to attribute copyright
for this block?
6.6.1. Conventional Reset
Conventional Reset includes all reset mechanisms
From: Stephen Warren swar...@nvidia.com
Tegra124 moved the CSITE block's base address. Fix U-Boot to use
the correct address.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
arch/arm/include/asm/arch-tegra/tegra.h | 5 +
1 file changed, 5 insertions(+)
diff --git
The Kona architecture is present on a number of Broadcom mobile SoCs
including the bcm281xx family of chips.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae s...@broadcom.com
Reviewed-by: Tim Kryger tkry...@linaro.org
---
arch/arm/cpu/armv7/Makefile|
This patchset introduces the Broadcom bcm281xx family of mobile SoC
chips. Broadcom kona hardware blocks are often found in Broadcom mobile
SoC chips including the bcm281xx family, so support for some of these
kona blocks is also provided here. These patches work on u-boot master
as well as the
From: Stephen Warren swar...@nvidia.com
In order to completely halt the AVP processor, we should simply write
FLOW_MODE_STOP without any extra options that allow wakeup. Amend the
code to do this.
I believe that enabling FIQ_1 and IRQ_1 allow the CPU to be awoken by
interrupts. We don't want
From: Stephen Warren swar...@nvidia.com
asm/arch-tegra/tegra.h needs to use CONFIG_TEGRA* to conditionalize
some definitions, since some modules moved between generations. Move
the definition of CONFIG_TEGRAnn to a header that's included earlier,
so that it's set by the time tegra.h needs to use
From: Stephen Warren swar...@nvidia.com
Register pmc_pwrgate_timer_mult has a different layout on Tegra114 and
Tegra124. Reflect this in pmc.h.
Also, simply write the whole of the register in start_cpu() rather than
doing a read-modify-write; the register is simple enough that the code
can
Add bcm281xx architecture support code including a clock framework and
chip reset. Define register block base addresses for the bcm281xx
architecture and create an empty gpio header file required when
CONFIG_CMD_GPIO is set.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae
Add support for the Kona GPIO controller found on Broadcom mobile SoCs.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae s...@broadcom.com
Reviewed-by: Markus Mayer markus.ma...@linaro.org
Reviewed-by: Tim Kryger tkry...@linaro.org
---
drivers/gpio/Makefile|1 +
Add support for the Kona I2C controller found on Broadcom mobile SoCs.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae s...@broadcom.com
Reviewed-by: Tim Kryger tkry...@linaro.org
---
drivers/i2c/Makefile |1 +
drivers/i2c/kona_i2c.c | 730
Add support for the Kona SDHCI found on Broadcom mobile SoCs.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae s...@broadcom.com
Reviewed-by: Tim Kryger tkry...@linaro.org
---
drivers/mmc/Makefile |1 +
drivers/mmc/kona_sdhci.c | 125
Add support for the bcm28155_ap reference board.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae s...@broadcom.com
Reviewed-by: Tim Kryger tkry...@linaro.org
---
board/broadcom/bcm28155_ap/Makefile |7 ++
board/broadcom/bcm28155_ap/bcm28155_ap.c | 87
Nice catch, fortunately I don't see this base addr used anywhere (yet) in T124.
-Original Message-
From: Stephen Warren [mailto:swar...@wwwdotorg.org]
Sent: Monday, February 03, 2014 2:03 PM
To: u-boot@lists.denx.de; Simon Glass; Tom Warren; Stephen Warren
Subject: [PATCH 3/4] ARM:
On 01/24/2014 06:59 AM, Tom Rini wrote:
On 01/24/2014 08:49 AM, Wolfgang Denk wrote:
Dear Dennis Gilmore,
In message 1390501358-4564-2-git-send-email-den...@ausil.us you wrote:
Signed-off-by: Dennis Gilmore den...@ausil.us
add any option for filesystem with sysboot uses generic load ?
On 01/24/2014 08:46 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
This enables generic filesystem commands such as load and ls, which
automatically work with multiple filesystem types, without having to
be told which is present, unlike e.g. ext2load, fatls.
Are there any
On 01/24/2014 07:58 AM, Dennis Gilmore wrote:
Hi Wolfgang,
El Fri, 24 Jan 2014 14:50:10 +0100
Wolfgang Denk w...@denx.de escribió:
Dear Dennis Gilmore,
In message 1390501358-4564-3-git-send-email-den...@ausil.us you
wrote:
describe a set of default features that distros can rely on
On 02/03/2014 02:18 PM, Tom Warren wrote:
Nice catch, fortunately I don't see this base addr used anywhere (yet) in
T124.
It's used to define CSITE_CPU_DBG*_LAR, and those are used in code.
(The internal Tegra simulator I'm running complains about the incorrect
register accesses when booting
1 - 100 of 143 matches
Mail list logo