Re: [RFC 5/5] doc: describe Milk-V Mars board

On 3/8/24 22:48, E Shattow wrote: Yes this reference to GPIO high/low states is clearer to understand. Have you tested the DIP switch functionality to confirm?; It is not shown in the MilkV documentation or outdated schematics and I don't have a Mars to test. I did find function descriptions

Re: [RFC 5/5] doc: describe Milk-V Mars board

Yes this reference to GPIO high/low states is clearer to understand. Have you tested the DIP switch functionality to confirm?; It is not shown in the MilkV documentation or outdated schematics and I don't have a Mars to test. I did find function descriptions from what is likely cut-and-paste of

Re: [RFC 5/5] doc: describe Milk-V Mars board

On 3/8/24 00:20, E Shattow wrote: On Sun, Mar 3, 2024 at 5:02 AM Heinrich Schuchardt > wrote: ... +The board provides the DIP switches MSEL[1:0] to select the boot device out of +SPI flash, eMMC, SD-card, UART. To select booting from

Re: [RFC 5/5] doc: describe Milk-V Mars board

On Sun, Mar 3, 2024 at 5:02 AM Heinrich Schuchardt < heinrich.schucha...@canonical.com> wrote: ... > +The board provides the DIP switches MSEL[1:0] to select the boot device > out of > +SPI flash, eMMC, SD-card, UART. To select booting from SD-card set the DIP > +switches MSEL[1:0] to 10. > This

[RFC 5/5] doc: describe Milk-V Mars board

Add instructions to build U-Boot for the Milk-V Mars board Signed-off-by: Heinrich Schuchardt --- doc/board/starfive/index.rst | 1 + doc/board/starfive/milk-v_mars.rst | 93 ++ 2 files changed, 94 insertions(+) create mode 100644