Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] environmental baudrate not used at boot up
The full NAND code only works after relocation. So you cannot read out
the NAND environment, in the normal way, before serial init -- you get
the default environment instead.
If you
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Wood Scott-B07421
Sent: Thursday, January 20, 2011 1:28 AM
To: chr...@cyberswitching.com
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] environmental baudrate not used at boot up
On Wed, Jan 19, 2011 at 07:59:10AM +0100, Wolfgang Denk wrote:
Based on empirical testing, I've discovered that re-running
init_baudrate() after env_relocate() fixes everything. The serial
console uses the baud rate stored in the baudrate variable now, and
some ordering of display outputs
Dear chr...@cyberswitching.com,
In message 20110119144640.GA8828@cslinux-build01.cyberswitching.local you
wrote:
Thanks for the feedback. I hope that someone else can continue this
work now that I've identified the problem and have developed a solution
that works for my needs with no
Dear Wolfgang Denk,
Dear chr...@cyberswitching.com,
In message20110119144640.GA8828@cslinux-build01.cyberswitching.local you
wrote:
Thanks for the feedback. I hope that someone else can continue this
work now that I've identified the problem and have developed a solution
that works for
On Wed, Jan 19, 2011 at 08:49:12PM +0100, Reinhard Meyer wrote:
I just want to point out that this works fine on our AT91SAM9260/9XE,
however the environment is read from I2C EEPROM. Not sure where
his ENV is coming from, whether it is read before use, or if there is
static data involved
On Tue, 18 Jan 2011 21:34:45 -0800
chr...@cyberswitching.com wrote:
On Sun, Jan 16, 2011 at 06:01:22AM -0800, chr...@cyberswitching.com wrote:
...
Any advice on where to take it from here?
Hi everyone,
I investigated this a little further, and I'm wondering if the problem
is related
On Sun, Jan 16, 2011 at 06:01:22AM -0800, chr...@cyberswitching.com wrote:
...
Any advice on where to take it from here?
Hi everyone,
I investigated this a little further, and I'm wondering if the problem
is related to the initialization ordering in lib_arm/board.c.
Here's the sequence:
Dear chr...@cyberswitching.com,
In message 20110119053445.GA9776@cslinux-build01.cyberswitching.local you
wrote:
I investigated this a little further, and I'm wondering if the problem
is related to the initialization ordering in lib_arm/board.c.
Here's the sequence:
start_armboot():
Le 16/01/2011 15:01, chr...@cyberswitching.com a écrit :
Hi list,
I have a board based on an Atmel AT91SAM9263-EK running U-boot 2009.01.
I can't seem to get the environmental variable baudrate to be used
properly, though.
Here's the sequence:
1. Power on board, baudrate=115200
On Sun, Jan 16, 2011 at 03:42:25PM +0100, Albert ARIBAUD wrote:
Le 16/01/2011 15:01, chr...@cyberswitching.com a ?crit :
I have a board based on an Atmel AT91SAM9263-EK running U-boot 2009.01.
I can't seem to get the environmental variable baudrate to be used
properly, though.
Hmm...
11 matches
Mail list logo