Remove unnecessary condition CONFIG_RAMBOOT_PBL to
have SST and EON SPI flash work in case of NOR boot.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
include/configs/T208xQDS.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/T208xQDS.h
I have following folder structure:
board/kernel_fdt.its
output/images/zImage
The kernel.its has following path for the zImage:
data = /incbin/(output/images/zImage);
When I invoke mkimage like this, it complains, that
output/images/zImage doesn't exist:
mkimage -f board/kernel_fdt.its
Replace 80 mircoseconds delay with polling flag ESPI_EV_TXE.
Signed-off-by: Hou Zhiqiang b48...@freescale.com
---
drivers/spi/fsl_espi.c | 138 +
1 file changed, 106 insertions(+), 32 deletions(-)
diff --git a/drivers/spi/fsl_espi.c
This patch makes it possible to boot from battery on olinuxino Boards
from Olimex.
We should not set DOUBLE_FETS in HW_POWER_MINPWR, it makes my system
reset with in seconds while running on battery power.
Also mxs_power_enable_4p2() should not be called if running from
battery. It switches
Hi Jeroen,
On Tue, May 20, 2014 at 9:06 PM, Jeroen Hofstee dasub...@myspectrum.nl wrote:
Dear Vasili,
On ma, 2014-05-19 at 12:45 +0300, Vasili Galka wrote:
[...]
2. I see a reoccurring pattern of some headers being used from the host,
causing mismatches and arising build errors. Then
Dear all,
I am thinking of getting the Uboot to load a VMM (in hyp mode) rather than a
standard kernel, is it a good (and feasible) idea to set the VMM as a
standalone application which runs in hyp mode, and then the VMM uncompress
and load a kernel image to be executed in SVC mode, is there a
Hi ,
I have added mmc driver into the vexpress64 board file for uboot and tested
it on FVP base model. I tried booting a kernel on that but it is aborting
with the following message:
Final value for argc=3
Loading Kernel Image ... OK
kernel loaded at 0x0008, end = 0x00827024
using: FDT
resync mtd, ubi and ubifs subsystem with linux:
commit 455c6fdbd219161bd09b1165f11699d6d73de11c
Author: Linus Torvalds torva...@linux-foundation.org
Date: Sun Mar 30 20:40:15 2014 -0700
Linux 3.14
Main reason for this sync is, we now have UBI fastmap support
in U-Boot.
Tested it on
resync with linux:
commit 455c6fdbd219161bd09b1165f11699d6d73de11c
Author: Linus Torvalds torva...@linux-foundation.org
Date: Sun Mar 30 20:40:15 2014 -0700
Linux 3.14
Needed for the MTD/UBI/UBIFS resync
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Marek Vasut ma...@denx.de
Cc: Sergey
using UBI and DM together leads in compiler error, as
both define a struct device, so rename struct device
in include/dm/device.h to struct udevice, as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux struct device
Signed-off-by: Heiko Schocher h...@denx.de
Cc:
from linux 3.14:
commit 455c6fdbd219161bd09b1165f11699d6d73de11c
Author: Linus Torvalds torva...@linux-foundation.org
Date: Sun Mar 30 20:40:15 2014 -0700
Linux 3.14
Needed for the MTD/UBI/UBIFS resync
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Marek Vasut ma...@denx.de
Cc: Sergey
On 20/05/14 20:47, Simon Glass wrote:
Hi Minkyu,
On 15 May 2014 00:51, Minkyu Kang mk7.k...@samsung.com wrote:
On 03/04/14 08:24, Simon Glass wrote:
From: Aaron Durbin adur...@chromium.org
The TSP65090 is a PMIC on some exynos5 boards. The init function is
called for the TPS65090 pmic. If
Development board for headless gateway platform from Abilis Systems.
Initial commit with working UART and DW GMAC.
For now with generic Ethernet PHY due to problems in Realtek PHY driver.
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Vineet Gupta vgu...@synopsys.com
Cc: Christian
On Wed, May 21, 2014 at 09:46:35AM +0100, Vishal Bhoj wrote:
Hi ,
Hi,
I have added mmc driver into the vexpress64 board file for uboot and tested
it on FVP base model. I tried booting a kernel on that but it is aborting
with the following message:
Final value for argc=3
Loading Kernel
On 05/21/2014 04:20 AM, Jaehoon Chung wrote:
Hi, Hector.
On 05/21/2014 01:37 AM, Hector Palacios wrote:
Hi,
On 05/16/2014 06:59 AM, Jaehoon Chung wrote:
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Tested-by: Lukasz Majewski l.majew...@samsung.com
Acked-by: Lukasz Majewski
Hi,
a script with 'if run' don't work as expect. I have test it on an
omap3_overo board.
The following script always prints true:
setenv testcmd false; if run testcmd; then echo true; fi;
This could be fixed by reverting commit
1992dbfdb9886c3dfc4a505091895c851f736f3a:
Make 'run' use
This board is based on Exynos5420 and is similar to SMDK5420 board.
Adding new and refactoring existing DT and config files to support
both SMDK5420 and Peach-Pit.
Akshay Saraswat (2):
Exynos5420: Introduce support for the Peach-Pit board
Exynos5420: Let macros be used for exynos5420
While the Exynos5420 chip is used in both Smdk5420 and in the Peach-Pit
line of devices, there could be other boards using the same chip, so a
common configuration file is being added (exynos5420.h) as well
as two common device tree files (exynos54xx.dtsi exynos5420.dtsi).
The peach board as
Macros defined in exynos5_setup.h specific to SMDK5420
are required for Peach-Pit too. Hence, replacing
CONFIG_SMDK5420 with CONFIG_EXYNOS5420 to enable these
macros for all the boards based on Exynos5420.
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Currently cntvoff_el2 is initialised with an arbitrary bag of bits
derived from the initial value of cnthctl_el2 on the current CPU. This is
somewhat odd and problematic as some of these bits are UNKNOWN at reset
and may differ across CPUs (which may cause an OS at EL1 to observe time
going
Hi Marek,
About the following piece of code in enable_pcie_clock:
int enable_pcie_clock(void)
* Switch LVDS clock source to SATA (0xb), disable clock INPUT and
* enable clock OUTPUT. This is important for PCI express link that
* is clocked from the i.MX6.
*/
#define
Hello,
is it possible to export some Uboot command line functions (e.g. bootm) to a
standalone app, in such shall my app be GPLed.
Many thanks.
--
View this message in context:
http://u-boot.10912.n7.nabble.com/Export-Uboot-command-line-functions-to-a-standalone-app-tp180395.html
Sent from
On Wed, May 21, 2014 at 10:40:38AM +0100, Mark Rutland wrote:
On Wed, May 21, 2014 at 09:46:35AM +0100, Vishal Bhoj wrote:
Hi ,
Hi,
I have added mmc driver into the vexpress64 board file for uboot and tested
it on FVP base model. I tried booting a kernel on that but it is aborting
On Wed, May 21, 2014 at 04:28:53PM +0100, Tom Rini wrote:
On Wed, May 21, 2014 at 10:40:38AM +0100, Mark Rutland wrote:
On Wed, May 21, 2014 at 09:46:35AM +0100, Vishal Bhoj wrote:
Hi ,
Hi,
I have added mmc driver into the vexpress64 board file for uboot and
tested
it on
I was wondering about the following warnings while bootings linux 3.15.0-rc5:
[0.998885] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xd1
[1.005485] nand: Toshiba NAND 128MiB 3,3V 8-bit
[1.010165] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[1.016176] Scanning device
On 05/20/2014 11:40 PM, Jaehoon Chung wrote:
Hi, Stephen.
i didn't apply your patch. Which repository do you use?
It's based on u-boot.git master branch. The latest u-boot-mmc.git master
branch is already included in that branch, and it looks like some
changes have been applied to cmd_mmc.c
The following series fixes problems with booting U-Boot without SPL
on am33xx/am43xx, which only happens in the case of NOR or QSPI. The
changes themselves are rather straight forward. The biggest thing is
that they highlight that SPL needs to migrate over to common/board_f.c
because, yeah,
We have two contexts for booting these platforms. One is SPL which is
roughly: reset, cpu_init_crit, lowlevel_init, s_init, sdram_init, _main,
board_init_f from SPL, ... then U-Boot loads. The other is a
memory-mapped XIP case (NOR or QSPI) where we do not run an SPL. In
this case we go,
With the changes to the i2c framework (and adopting the omap24xx_i2c
driver to them) we can no longer call i2c functions prior to gd having
been set and cleared. When SPL booting, this is handled by setting gd
to point to SRAM in s_init. However in the cases where we are loaded
directly by ROM
On Wed, 2014-05-14 at 11:20 -0400, Tom Rini wrote:
On Wed, May 14, 2014 at 08:29:48AM +0100, Ian Campbell wrote:
On Tue, 2014-05-13 at 07:19 -0400, Tom Rini wrote:
On Tue, May 13, 2014 at 11:19:13AM +0100, Ian Campbell wrote:
Thanks, have you also seen [PATCH v3 0/5] net/designware:
Hi Minkyu,
On 21 May 2014 00:05, Minkyu Kang mk7.k...@samsung.com wrote:
On 20/05/14 20:47, Simon Glass wrote:
Hi Minkyu,
On 15 May 2014 00:51, Minkyu Kang mk7.k...@samsung.com wrote:
On 03/04/14 08:24, Simon Glass wrote:
From: Aaron Durbin adur...@chromium.org
The TSP65090 is a PMIC on
On Wed, May 21, 2014 at 07:44:15PM +0100, Ian Campbell wrote:
On Wed, 2014-05-14 at 11:20 -0400, Tom Rini wrote:
On Wed, May 14, 2014 at 08:29:48AM +0100, Ian Campbell wrote:
On Tue, 2014-05-13 at 07:19 -0400, Tom Rini wrote:
On Tue, May 13, 2014 at 11:19:13AM +0100, Ian Campbell wrote:
From: Cormier, Jonathan jcorm...@criticallink.com
get_phy_id returns -EIO when it can't read from a phy at a given addr. This
would cause
create_phy_by_mask to return prematurely before it had tested the other
addresses in the provided mask.
Example usage:
Replace
phydev =
Hi Simon,
I have added the next patch in the series i.e., (../339610/) But the
result is still the same. This particular patch just created a device tree
In the arch/arm/dts folder For the beaglebone. I have already tried
creating for am335x-evmsk and was able to build the u-boot-dtb.bin.
I
Hey all,
Something that Rob mentioned to me at ELC, and others have mentioned
before is that it would be nice if 'bootm' (which says boot application
image stored in memory in the help, even) would just work with zImage
or Image or whatever is spit directly out of the kernel.
The following shows
Dear Tom Rini,
In message 20140521195824.GE1752@bill-the-cat you wrote:
Something that Rob mentioned to me at ELC, and others have mentioned
before is that it would be nice if 'bootm' (which says boot application
image stored in memory in the help, even) would just work with zImage
or Image
On Tue, May 20, 2014 at 10:34 AM, Stefan Herbrechtsmeier
ste...@herbrechtsmeier.net wrote:
A run of mmcargs is missing.
Totally correct---good catch.
I'll send a v2 for this series rebased on u-boot-ti/master and also
include this [1] patch. Hopefully this is correct.
--Ash
[1]
On Wed, May 21, 2014 at 10:10:50PM +0200, Wolfgang Denk wrote:
Dear Tom Rini,
In message 20140521195824.GE1752@bill-the-cat you wrote:
Something that Rob mentioned to me at ELC, and others have mentioned
before is that it would be nice if 'bootm' (which says boot application
image
This patch series collects board-specific fixes and updates for the
Gumstix Overo COMs.
v2 adds [1] originally sent separately and amends as discussed [2].
[1] https://www.mail-archive.com/u-boot@lists.denx.de/msg137739.html
[2] http://lists.denx.de/pipermail/u-boot/2014-May/179891.html
Ash
The linux kernel is at nand0,3 using the current layout, but is best
accessed through the partition label linux. Since CONFIG_CMD_MTDPARTS is
defined the CONFIG_JFFS2 settings are unreferenced; use setenv partition
rootfs to set the default mtd partition for jffs2.
Signed-off-by: Peter A. Bigot
Add EEPROM ID switches for Alto35, Arbor43C, Stagecoach, Thumbo, and
Turtlecore Gumstix Overo expansion boards.
Signed-off-by: Ash Charles a...@gumstix.com
---
board/overo/overo.c | 42 --
board/overo/overo.h | 16
2 files changed, 56
Update the board configuration for Gumstix Overo. In particular,
add support for zImage and DTB files on boot.
Signed-off-by: Ash Charles ashchar...@gmail.com
---
include/configs/omap3_overo.h | 58 ---
1 file changed, 38 insertions(+), 20 deletions(-)
Clean-up the board configuration file for the Gumstix Overo board by
including common omap3 definitions from ti_omap3_common.h as suggested
here [1].
[1] http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/185960
Signed-off-by: Ash Charles ashchar...@gmail.com
Conflicts:
The relocation code can now relocate from anywhere to
the RAM.
The old code assumed that the binary was copied to the RAM
by some PBL and then it just relocated the .text section
from the loaded address to the linked address.
Now, it first checks if vectors are somewhere else than the
linked
The OpenRISC architecture specification v1.0 defines
new SPR registers. This patch adds registers definition
for group 0 and update bit definitions for the CPU
configuration register.
Signed-off-by: Franck Jullien franck.jull...@gmail.com
---
arch/openrisc/include/asm/spr-defs.h | 13
From: Peter A. Bigot p...@pabigot.com
Linux kernel at version 3.5 is about 3.5 MiB; test kernels for 3.10 exceed 4
MiB. Prepare for future upgrades by increasing the NAND partition now.
Signed-off-by: Peter A. Bigot p...@pabigot.com
Tested-by: Ash Charles a...@gumstix.com
---
The NAND linux partition format default was changed from jffs2 to ubi in
254973e6df0e48f1a72b67905185c774dcd9f394 but the corresponding commands were
not enabled.
Signed-off-by: Peter A. Bigot p...@pabigot.com
Tested-by: Ash Charles a...@gumstix.com
---
include/configs/omap3_overo.h | 40
Patch f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used]
breaks SPL booting on Overo. Since some gpio inputs are
read to detect the board revision. But with this patch above, the
clocks to the GPIO subsystems are not enabled per default any more.
The GPIO banks need to be
Gumstix Overo COMs with board revision 0x4 use a different Wifi and
Bluetooth module: Wi2Wi's W2CBW0015. No other code changes are required
in u-boot---just handling of this particular board revision.
Signed-off-by: Ash Charles ashchar...@gmail.com
---
board/overo/overo.c | 1 +
Adapted from d70f5480 described below.
commit d70f54808dfa83b574e1239c3eccbcf3317343e1
Author: Javier Martinez Canillas jav...@dowhile0.org
Date: Mon Jan 7 03:51:20 2013 +
omap4: allow the use of a plain text env file instead boot scripts
For production systems it is
Building for a custom Freescale i.MX28 board failed for me. Here is the
output:
[joerg@timelineX u-boot-testing]$ export ARCH=arm
[joerg@timelineX u-boot-testing]$ export
CROSS_COMPILE=arm-linux-gnueabi-
[joerg@timelineX u-boot-testing]$ make mrproper
CLEAN scripts/basic
On 21 May 2014 03:20, Akshay Saraswat aksha...@samsung.com wrote:
While the Exynos5420 chip is used in both Smdk5420 and in the Peach-Pit
line of devices, there could be other boards using the same chip, so a
common configuration file is being added (exynos5420.h) as well
as two common device
On 21 May 2014 03:20, Akshay Saraswat aksha...@samsung.com wrote:
Macros defined in exynos5_setup.h specific to SMDK5420
are required for Peach-Pit too. Hence, replacing
CONFIG_SMDK5420 with CONFIG_EXYNOS5420 to enable these
macros for all the boards based on Exynos5420.
Signed-off-by:
Hi Doug,
On 20 May 2014 12:51, Doug Anderson diand...@chromium.org wrote:
Simon,
On Tue, May 13, 2014 at 11:17 AM, Simon Glass s...@chromium.org wrote:
Hi Doug,
On 18 April 2014 15:32, Doug Anderson diand...@chromium.org wrote:
Simon,
On Fri, Apr 18, 2014 at 1:43 PM, Simon Glass
In 20 May 2014 03:16, Michael van der Westhuizen
michael.vanderwesthui...@smart-africa.com wrote:
Due to the FIT_MAX_HASH_LEN constant not having been updated
to support SHA256 signatures one will always see a buffer
overflow in fit_image_process_hash when signing images that
use this larger
On 20 May 2014 03:58, Michael van der Westhuizen
mich...@smart-africa.com wrote:
It is trivial to crash fit_check_sign by invoking with an
absolute path in a deeply nested directory. This is exposed
by vboot_test.sh.
Signed-off-by: Michael van der Westhuizen mich...@smart-africa.com
Hi Harsha,
On 21 May 2014 06:46, Harsha Kiran harshakiran...@gmail.com wrote:
Hi Simon,
I have added the next patch in the series i.e., (../339610/) But the
result is still the same. This particular patch just created a device tree
In the arch/arm/dts folder For the beaglebone. I have
On 22/05/14 03:58, Simon Glass wrote:
Hi Minkyu,
On 21 May 2014 00:05, Minkyu Kang mk7.k...@samsung.com wrote:
On 20/05/14 20:47, Simon Glass wrote:
Hi Minkyu,
On 15 May 2014 00:51, Minkyu Kang mk7.k...@samsung.com wrote:
On 03/04/14 08:24, Simon Glass wrote:
From: Aaron Durbin
Hi Stephen,
On 13 May 2014 09:30, Stephen Warren swar...@wwwdotorg.org wrote:
On 05/09/2014 11:28 AM, Simon Glass wrote:
This is an implementation of GPIOs for Tegra that uses driver model. It has
been tested on trimslice and also using the new iotrace feature.
The implementation uses a
Hi Josh,
On 05/21/2014 10:42 AM, Josh Wu wrote:
Also we enable the mmc command in configuration file.
As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
so remove the redundant CONFIG_DOS_PARTITION definition.
Signed-off-by: Josh Wu josh...@atmel.com
Acked-by: Bo Shen
Hi Josh,
On 05/21/2014 10:42 AM, Josh Wu wrote:
In this configuration the environment will save in file: uboot.env of
mmc card.
Signed-off-by: Josh Wu josh...@atmel.com
Acked-by: Bo Shen voice.s...@atmel.com
---
v1 - v2:
1. remove mem=128m and roottype in bootargs.
2. default boot
On 05/22/2014 01:18 AM, Stephen Warren wrote:
On 05/20/2014 11:40 PM, Jaehoon Chung wrote:
Hi, Stephen.
i didn't apply your patch. Which repository do you use?
It's based on u-boot.git master branch. The latest u-boot-mmc.git master
branch is already included in that branch, and it looks
Hello Jörg,
Am 21.05.2014 22:44, schrieb Jörg Krause:
Building for a custom Freescale i.MX28 board failed for me. Here is the output:
[joerg@timelineX u-boot-testing]$ export ARCH=arm
[joerg@timelineX u-boot-testing]$ export
CROSS_COMPILE=arm-linux-gnueabi-
[joerg@timelineX u-boot-testing]$
Hi Stefan,
On 21 May 2014 03:12, Stefan Herbrechtsmeier ste...@herbrechtsmeier.net wrote:
Hi,
a script with 'if run' don't work as expect. I have test it on an
omap3_overo board.
The following script always prints true:
setenv testcmd false; if run testcmd; then echo true; fi;
This could
64 matches
Mail list logo
