Hi Daniel,
From: Daniel Mack [mailto:zon...@gmail.com]
Resending this since I got no replies on the first version.
I also fixed up the commit log of #1.
I plan to test this, but there is still a long pending list of patches which
for me to test in kernel and u-boot. So it might take bit time.
Hi Vasili,
On Wed, 2014-06-25 at 15:38 +0300, Vasili Galka wrote:
Hi Alexey,
Your commit 50b0df814b0f75c08a3d45a017016a75af3edb5d caused
drivers/net/designware.c to be dependent on dcache functionality, e.g.
invalidate_dcache_range(). This brakes build for configurations that
don't
have
Hi,
On 06/26/2014 08:08 AM, Gupta, Pekon wrote:
From: Daniel Mack [mailto:zon...@gmail.com]
Resending this since I got no replies on the first version.
I also fixed up the commit log of #1.
I plan to test this, but there is still a long pending list of patches which
for me to test in
(re-adding Hans whose CC I seem to have dropped somehow, sorry)
On Wed, 2014-06-25 at 20:57 +0100, Ian Campbell wrote:
Hi Albert,
Any comments on these sunxi series from Hans and myself?
I wonder if Hans and I should be applying for a u-boot-sunxi.git
custodian tree[0]?
Ian.
[0]
From: Shaohui Xie shaohui@freescale.com
On some platforms, CSn FTIM2.TCH is set to zero which is invalid,
an invalid hold time makes DUT timing variances, whether it works
or not on luck.
Signed-off-by: Shaohui Xie shaohui@freescale.com
---
based on 'next' of
Dear Scott,
In message 1403637570.26908.38.ca...@snotra.buserror.net you wrote:
I still disagree with #ifndef __UBOOT__ as it will hurt more than it
helps with future merges.
I agree that #ifdef's should be avoided, but then here they also serve
a documentation purpose as they clearly mark
Von: Tom Rini [mailto:tom.r...@gmail.com] Im Auftrag von Tom Rini
Gesendet: Mittwoch, 25. Juni 2014 15:07
An: Thumshirn, Johannes Tobias
Cc: u-boot@lists.denx.de; Schnürer, Thomas
Betreff: Re: [U-Boot] [PATCH] Add Epson RX8581 RTC support
* PGP Signed by an unknown key
On Wed, Jun 25,
Patchset V1:
https://www.mail-archive.com/u-boot@lists.denx.de/msg140596.html
Patch 6 is TEST_ONLY since Simon will be sending it as a part of
device model changes.
Patch 10 is TEST_ONLY and it adds support for cros-ec on peach_pit.
Simon will be sending a proper patchset for the same.
Changes
This patch adds missing declaration for gpio_direction_input
function, thereby helps in resolving compilation warnings.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
---
arch/arm/include/asm/arch-exynos/gpio.h | 1 +
1 file changed, 1 insertion(+)
diff --git
Enable drivers for FIMD, DP and parade bridge chip.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
---
include/configs/peach-pit.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 76b8d7a..88c093f 100644
---
RPLL is needed to drive the LCD panel on Exynos5420 based boards.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/armv7/exynos/clock_init.h | 3 +++
From: Vadim Bendebury vben...@chromium.org
The initialization table comes from the Illustration of I2C command
for initialing PS8625 document supplied by Parade.
Signed-off-by: Vadim Bendebury vben...@chromium.org
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
Acked-by: Simon Glass
This patch adds DT properties for fimd and the parade bridge chip
present on peach_pit. The panel supports 1366x768 resolution.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
Previously, we used to statically assign values for vl_col, vl_row and
vl_bpix using #defines like LCD_XRES, LCD_YRES and LCD_COLOR16.
Introducing the function exynos_lcd_early_init() would take care of this
assignment on the fly by parsing FIMD DT properties, thereby allowing us
to remove
Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 needed by
exynos video driver.
Also, configure ACLK_400_DISP1 as the parent for MUX_ACLK_400_DISP1_SUB_SEL.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
On Exynos5420 and newer versions, the FIMD sysmmus are in
on state by default.
We have to disable them in order to make FIMD DMA work.
This patch adds the required framework to exynos_fimd driver,
and disables FIMD sysmmu on Exynos5420.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
---
Add initialization code for peach_pit panel, parade bridge chip,
and backlight.
Signed-off-by: Ajay Kumar ajaykumar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
arch/arm/include/asm/arch-exynos/system.h | 3 +
WIP patch to enable cros-ec on peach_pit.
Signed-off-by: Simon Glass s...@chromium.org
---
drivers/misc/cros_ec_spi.c| 4 +-
drivers/power/pmic/Makefile | 3 +-
drivers/power/pmic/pmic_tps65090_ec.c | 212 ++
drivers/spi/exynos_spi.c
Hi Fabio,
On 25/06/2014 19:45, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
With CONFIG_SYS_GENERIC_BOARD the board hangs after issuing a 'save' command.
Remove CONFIG_SYS_GENERIC_BOARD until this issue can be fixed properly.
Signed-off-by: Fabio Estevam
From: Stephen Warren swar...@wwwdotorg.org
To: u-boot@lists.denx.de, Heiko Schocher h...@denx.de,
Cc: Stephen Warren swar...@nvidia.com, Tom Warren twar...@nvidia.com
Date: 2014/06/25 19:05
Subject: [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads
Sent by:
Hi Albert,
please pull from u-boot-imx, thanks !
The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
net/designware: Make DMA burst length configurable and reduce by
default (2014-05-25 17:23:58 +0200)
are available in the git repository at:
Dear Ajay Kumar,
In message 1403769668-2026-11-git-send-email-ajaykumar...@samsung.com you
wrote:
WIP patch to enable cros-ec on peach_pit.
Do you think anybody would be able to figure out what this is supposed
to mean? I can't...
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2013 The Chromium
Dear Ajay Kumar,
In message 1403769668-2026-6-git-send-email-ajaykumar...@samsung.com you
wrote:
...
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
NAK. We need precise licnese terms; just mentioning some LICENSE
file without even
- env ask, env grep and setexpr are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images
Signed-off-by: Marek Vasut
From: Lothar Rubusch lot...@denx.de
Signed-off-by: Marek Vasut ma...@denx.de
Signed-off-by: Lothar Rubusch lot...@denx.de
---
include/configs/m28evk.h | 87 ++--
1 file changed, 84 insertions(+), 3 deletions(-)
diff --git a/include/configs/m28evk.h
Adjust the mtdparts to also consider factory-programmed config block.
Signed-off-by: Marek Vasut ma...@denx.de
---
include/configs/m28evk.h | 17 -
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index
- env ask, env grep and setexpr are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images
Signed-off-by: Marek Vasut
Adjust the mtdparts settings to allow for alternative boot images and
for using UBI.
Signed-off-by: Marek Vasut ma...@denx.de
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Stefano Babic sba...@denx.de
---
include/configs/m53evk.h | 17 -
1 file changed, 8 insertions(+), 9
From: Lothar Rubusch lot...@denx.de
Signed-off-by: Marek Vasut ma...@denx.de
Signed-off-by: Lothar Rubusch lot...@denx.de
Signed-off-by: Wolfgang Denk w...@denx.de
---
include/configs/m53evk.h | 87 +++-
1 file changed, 86 insertions(+), 1 deletion(-)
Hi Denk,
On Thu, Jun 26, 2014 at 2:16 PM, Wolfgang Denk w...@denx.de wrote:
Dear Ajay Kumar,
In message 1403769668-2026-11-git-send-email-ajaykumar...@samsung.com you
wrote:
WIP patch to enable cros-ec on peach_pit.
This Entire patch is a TEST_ONLY since it is still WIP(Work In Progress).
On Thursday, June 26, 2014 at 06:46:11 AM, Vivek Gautam wrote:
Hi Simon, Marek,
On Thu, Jun 26, 2014 at 10:04 AM, Vivek Gautam gautam.vi...@samsung.com
wrote:
sorry for spamming, the earlier message got sent by mistake.
On Thu, Jun 26, 2014 at 8:00 AM, Simon Glass s...@chromium.org
Dear Ajay kumar,
In message caec9eqna9dkkhg9cgobawtprkmsn32jorq9uw2wgrdkedpr...@mail.gmail.com
you wrote:
In message 1403769668-2026-11-git-send-email-ajaykumar...@samsung.com you
wrote:
WIP patch to enable cros-ec on peach_pit.
This Entire patch is a TEST_ONLY since it is still
On Thu, Jun 26, 2014 at 4:19 PM, Wolfgang Denk w...@denx.de wrote:
Dear Ajay kumar,
In message
caec9eqna9dkkhg9cgobawtprkmsn32jorq9uw2wgrdkedpr...@mail.gmail.com you
wrote:
In message 1403769668-2026-11-git-send-email-ajaykumar...@samsung.com
you wrote:
WIP patch to enable cros-ec
On Wed, Jun 25, 2014 at 7:16 PM, Steve Rae s...@broadcom.com wrote:
Rob,
On 14-06-25 06:59 AM, Rob Herring wrote:
On Mon, Jun 23, 2014 at 1:37 PM, Steve Rae s...@broadcom.com wrote:
Rob Sebastian
I would appreciate your comments on this issue; I suspect that you had
some
ideas
It is possible to boot from a few media devices, especially
using a micro SD or eMMC slots. In this situation depends on
a boot device - some setup can be changeg.
This change adds function:
boot_device() - which returns an OM[1:5] bits value
This allows checking if boot device is SD(0x2).
This change enable automatic setting of dfu alt info
on every boot. This is useful in case of booting one
u-boot binary from multiple media.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
---
board/samsung/common/board.c | 3 +++
1 file changed, 3 insertions(+)
diff --git
This change adds setup of environmental board info using
get_board_name() and get_board_type() functions for config
CONFIG_BOARD_TYPES.
This is useful in case of running many boards with just one config.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Piotr Wilczek
This change fixes the bad gpio configuration for the exynos dwmmc.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Beomho Seo beomho@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Jaehoon Chung jh80.ch...@samsung.com
---
arch/arm/cpu/armv7/exynos/pinmux.c | 4 ++--
1 file
This patch set introduces:
- boot device check
- automatic init order of mmc proper driver
- automatic setting of dfu entities which depends on boot device
- pre reset function for board own implementation
- setting board info environment for multi board support
- Odroid U3/X2 support
Przemyslaw
This change introduces new common function:
- set_dfu_alt_info() - put dfu system and bootloader setting
into $dfu_alt_info.
functions declaration:
- char *get_dfu_alt_system(void)
- char *get_dfu_alt_boot(void)
- void set_dfu_alt_info(void)
and new config:
-
This board file supports standard features of Odroid X2 and U3 boards:
- Exynos4412 core clock set to 1000MHz and MPLL peripherial clock set to 800MHz,
- MAX77686 power regulator,
- USB PHY,
- enable XCL205 - power for board peripherials
- check board type: U3 or X2.
- enable Odroid U3 FAN cooler
This is a standard description for Odroid boards.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Tom Rini tr...@ti.com
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/exynos4412-odroid.dts | 70 ++
On an Odroid U3 board, the SOC is unable to reset the eMMC card
in the DWMMC mode by the cpu software reset. Manual reset of the card
by switching proper gpio pin - fixes this issue.
Such solution needs to add a call to pre reset function.
This is done by the reset_misc() function, which is
It is possible to boot device using a micro SD or eMMC slots.
In this situation, boot device should be registered as a block
device 0 in the MMC framework, because CONFIG_SYS_MMC_ENV_DEV
is usually set to 0 in the most config cases.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
---
This change adds declaration of functions:
- set_board_type() - called at checkboard()
- get_board_type() - called at checkboard()
- get_board_name()
For supporting multiple board types in a one config - it is welcome
to display the current board model. This is what get_board_type()
should
This config is valid for two devices:
- Odroid X2,
- Odroid U3.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Tom Rini tr...@ti.com
---
Changes v2:
- odroid config: add CONFIG_DFU_ALT_BOOTLOADER
- odroid config: change name of
Hi,
This is a section of the log from u-boot running on Avnet Microzed board:
[Thu Jun 26 17:40:53.656 2014]
[Thu Jun 26 17:40:53.656 2014]
[Thu Jun 26 17:40:53.656 2014] U-Boot 2013.07 (Jun 26 2014 - 17:34:41)
[Thu Jun 26 17:40:53.656 2014]
[Thu Jun 26 17:40:53.656 2014] 1 GiB
[Thu Jun 26
On 06/26/2014 02:11 AM, Joakim Tjernlund wrote:
From: Stephen Warren swar...@wwwdotorg.org
To: u-boot@lists.denx.de, Heiko Schocher h...@denx.de,
Cc: Stephen Warren swar...@nvidia.com, Tom Warren twar...@nvidia.com
Date: 2014/06/25 19:05
Subject: [U-Boot] [PATCH 1/3] i2c: tegra: use repeated
On 14-06-26 06:20 AM, Rob Herring wrote:
On Wed, Jun 25, 2014 at 7:16 PM, Steve Rae s...@broadcom.com wrote:
Rob,
On 14-06-25 06:59 AM, Rob Herring wrote:
On Mon, Jun 23, 2014 at 1:37 PM, Steve Rae s...@broadcom.com wrote:
Rob Sebastian
I would appreciate your comments on this issue;
This not only looks a bit better it also prevents a
warning with W=1 (no previous prototype).
cc: ag...@denx.de
Signed-off-by: Jeroen Hofstee jer...@myspectrum.nl
---
common/splash.c | 6 +-
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/common/splash.c b/common/splash.c
index
This not only looks a bit better it also prevents a
warning with W=1 (no previous prototype).
Signed-off-by: Jeroen Hofstee jer...@myspectrum.nl
---
lib/lmb.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/lib/lmb.c b/lib/lmb.c
index 081e418..49a3c9e 100644
---
The field wrtord_bg should add 2 clocks if on the fly chop is enabled,
according to DDR controller manual for DDR4.
Signed-off-by: York Sun york...@freescale.com
---
drivers/ddr/fsl/ctrl_regs.c |3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/ddr/fsl/ctrl_regs.c
This not only looks a bit better it also prevents a
warning with W=1 (no previous prototype).
Signed-off-by: Jeroen Hofstee jer...@myspectrum.nl
---
common/main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/common/main.c b/common/main.c
index 32618f1..2979fbe 100644
---
This series implements the fastboot flash command for eMMC devices.
It supports both raw and sparse images.
NOTES:
- the support for the fastboot flash command is enabled with
CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for
- to prepare for the support of fastboot sparse images
Signed-off-by: Steve Rae s...@broadcom.com
---
This file is ASIS from:
https://raw.githubusercontent.com/AOSB/android_system_core/master/libsparse/sparse_format.h
(commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
except for the __UBOOT__
- implement 'fastboot flash' for eMMC devices
Signed-off-by: Steve Rae s...@broadcom.com
---
Changes in v2:
- update README.android-fastboot file
README | 10 ++
doc/README.android-fastboot | 5 +++--
drivers/usb/gadget/f_fastboot.c | 31
- add support for 'fastboot flash' command for eMMC devices
Signed-off-by: Steve Rae s...@broadcom.com
---
I suspect that the sparse image handling (ie. the while (remaining_chunks)
loop)
has been implemented elsewhere -- I need help finding the original code to
determine
any licensing
- update static function
- additional debugging statements
Signed-off-by: Steve Rae s...@broadcom.com
---
Changes in v2:
- new in v2
drivers/usb/gadget/f_fastboot.c | 10 +++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 18:47:55:
On 06/26/2014 02:11 AM, Joakim Tjernlund wrote:
From: Stephen Warren swar...@wwwdotorg.org
To: u-boot@lists.denx.de, Heiko Schocher h...@denx.de,
Cc: Stephen Warren swar...@nvidia.com, Tom Warren
twar...@nvidia.com
On 06/26/2014 01:11 PM, Joakim Tjernlund wrote:
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 18:47:55:
On 06/26/2014 02:11 AM, Joakim Tjernlund wrote:
From: Stephen Warren swar...@wwwdotorg.org
To: u-boot@lists.denx.de, Heiko Schocher h...@denx.de,
Cc: Stephen Warren
On 06/26/2014 01:18 PM, Stephen Warren wrote:
On 06/26/2014 01:11 PM, Joakim Tjernlund wrote:
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 18:47:55:
On 06/26/2014 02:11 AM, Joakim Tjernlund wrote:
From: Stephen Warren swar...@wwwdotorg.org
To: u-boot@lists.denx.de, Heiko Schocher
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 21:18:50:
On 06/26/2014 01:11 PM, Joakim Tjernlund wrote:
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 18:47:55:
On 06/26/2014 02:11 AM, Joakim Tjernlund wrote:
From: Stephen Warren swar...@wwwdotorg.org
To:
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 21:24:05:
On 06/26/2014 01:18 PM, Stephen Warren wrote:
On 06/26/2014 01:11 PM, Joakim Tjernlund wrote:
Stephen Warren swar...@wwwdotorg.org wrote on 2014/06/26 18:47:55:
On 06/26/2014 02:11 AM, Joakim Tjernlund wrote:
From:
- to prepare for the support of fastboot sparse images
Signed-off-by: Steve Rae s...@broadcom.com
---
This file is ASIS from:
https://raw.githubusercontent.com/AOSB/android_system_core/master/libsparse/sparse_format.h
(commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
except for the __UBOOT__
- implement 'fastboot flash' for eMMC devices
Signed-off-by: Steve Rae s...@broadcom.com
---
Changes in v3: None
Changes in v2:
- update README.android-fastboot file
README | 10 ++
doc/README.android-fastboot | 5 +++--
drivers/usb/gadget/f_fastboot.c |
- add support for 'fastboot flash' command for eMMC devices
Signed-off-by: Steve Rae s...@broadcom.com
---
I suspect that the sparse image handling (ie. the while (remaining_chunks)
loop)
has been implemented elsewhere -- I need help finding the original code to
determine
any licensing
This series implements the fastboot flash command for eMMC devices.
It supports both raw and sparse images.
NOTES:
- the support for the fastboot flash command is enabled with
CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for
- update static function
- additional debugging statements
Signed-off-by: Steve Rae s...@broadcom.com
---
Changes in v3: None
Changes in v2:
- new in v2
drivers/usb/gadget/f_fastboot.c | 10 +++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git
J6 EVM can be built with UART3 as console, but currently
there's nothing muxing UART3 correctly. Likely this only
works because, based on commit log, author was only testing
with UART3 boot and - I assume - ROM code leave UART3 correctly
muxed in that case.
If we want to boot from MMC and still
On 06/26/2014 02:01 PM, Joakim Tjernlund wrote:
...
Strange, I had a look at the driver and I have a hard time figuring out
how/when START/STOP
is generated. However I don't think the current driver's
wait_for_transfer_complete() waits for
the START/STOP. I guess it waits until all data
70 matches
Mail list logo