Even for the single core cortex-a7, SMP bit should be set before
enabling MMU and cache.
Reference: Cortex A7 r0p5 TRM. section 4.3.31.
On Fri, Jan 13, 2017 at 12:41 PM, Icenowy Zheng wrote:
>
>
> 13.01.2017, 09:34, "Andre Przywara" :
>> Instead of enumerating all SoC families that need that bit
> Am 13.01.2017 um 08:50 schrieb Alison Wang :
>
> For 64-bit kernel, there is a warning about x1-x3 nonzero in violation
> of boot protocol. x3 should be reset to zero before jumping to the
> kernel.
>
> This patch will adjust the parameters to transfer and make sure x3 is
> zero.
>
> Signed-
On 13/01/17 04:41, Icenowy Zheng wrote:
Hi,
> 13.01.2017, 09:34, "Andre Przywara" :
>> Instead of enumerating all SoC families that need that bit set, let's
>> just express this more clearly: The SMP bits needs to be set on
>> SMP capable ARMv7 CPUs. It's much easier to Kconfig to express it the
On 13/01/17 08:09, Vishnu Patekar wrote:
Hi Vishnu,
> Even for the single core cortex-a7, SMP bit should be set before
> enabling MMU and cache.
>
> Reference: Cortex A7 r0p5 TRM. section 4.3.31.
Ah, good point, thanks for the heads up. I was misled by the SMP name
when answering Icenowy.
So it'
On 01/13/2017 09:23 AM, Alison Wang wrote:
Am 13.01.2017 um 08:50 schrieb Alison Wang :
For 64-bit kernel, there is a warning about x1-x3 nonzero in
violation
of boot protocol. x3 should be reset to zero before jumping to the
kernel.
This patch will adjust the parameters to transfer and make
Hi Alison,
I'll wait for a new version based on Alex's feedback before I test.
The change looks like it should work, so I'm happy to wait, unless you feel
thjere is a need to test it sooner.
Thanks for the quick response.
Regards,
Ryan.
On 13 Jan 2017 08:16, "Alison Wang" wrote:
Hi, Ryan,
Hi, Ryan,
This patch is to fix the issue about a warning for ARMv8 64-bit kernel
you reported before. I have tested on my LayerScape boards. Please review and
try on your boards too.
Thanks.
Best Regards,
Alison Wang
> -Original Message-
> From: Alison Wang [mailto:b1
Hi,
please subscribe here.
http://lists.denx.de/mailman/listinfo/u-boot
Thanks,
Michal
On 12.1.2017 17:45, adam.da...@stfc.ac.uk wrote:
> Hi,
>
> Just starting out looking at u-boot for a project using Xilinx Zynq zc7020
> chip on an Enclustra module
>
> Please add me to the mailing list
>
>
> On 01/13/2017 09:23 AM, Alison Wang wrote:
> >>> Am 13.01.2017 um 08:50 schrieb Alison Wang :
> >>>
> >>> For 64-bit kernel, there is a warning about x1-x3 nonzero in
> >> violation
> >>> of boot protocol. x3 should be reset to zero before jumping to the
> >>> kernel.
> >>>
> >>> This patch will
Hi,
On 13/01/17 02:19, Simon Glass wrote:
> Hi Andre,
>
> On 2 January 2017 at 04:48, Andre Przywara wrote:
>> When compiling the SPL for the Allwinner A64 in AArch64 mode, we can't
>> use the more compact Thumb2 encoding, which only exists for AArch32
>> code. This makes the SPL rather big, up
Hi Igor, Simon,
On 12/26/2016 09:24 AM, Igor Grinberg wrote:
> Hi Tomas,
>
> Sorry for the late response...
>
> On 12/20/16 07:29, Tomas Melin wrote:
>> Hi Igor, Simon,
>>
>> On 12/15/2016 11:08 AM, Igor Grinberg wrote:
>>> Hi Tomas,
>>>
>>> On 12/14/16 16:23, Tomas Melin wrote:
Hi Simon, I
On 01/13/2017 10:36 AM, Alison Wang wrote:
On 01/13/2017 09:23 AM, Alison Wang wrote:
Am 13.01.2017 um 08:50 schrieb Alison Wang :
For 64-bit kernel, there is a warning about x1-x3 nonzero in
violation
of boot protocol. x3 should be reset to zero before jumping to the
kernel.
This patch will
> Subject: Re: [PATCH v3] disk: convert to Kconfig
>
> >
> > >
> > > First, thanks for doing all of this, I think it's just about ready to
> > > apply so:
> > >
> > > Reviewed-by: Tom Rini
> > >
> > > But that said, I'm going to re-run the sync as there's still a few
> > > places where we enable
Enable support for loading a splash image from within a FIT image.
The image is assumed to be generated with mkimage -E flag to hold
the data external to the FIT.
Signed-off-by: Tomas Melin
---
Changes in v5:
- Change two debug() statements to use printf(), update printed error msg
Changes in
Sort include files in accordance to U-Boot coding style.
Signed-off-by: Tomas Melin
---
Changes in v5:
- None
Changes in v4:
- Added missing changelog
Changes in v3:
- Change patch order so that include sort patch comes prior to adding
new include
Changes in v2:
- Add separate patch for sor
From: Wenbin Song
The LS1043A rev1.1 silicon supports two types of GIC offset: 4K
alignment and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT]
is used to choose which offset will be used.
The LS1043A rev1.0 silicon only supports the CIG offset with 4K
alignment.
If GIC_ADDR_BIT bit is s
On Thu, Jan 12, 2017 at 11:47:48AM -0700, Stephen Warren wrote:
> On 01/12/2017 11:32 AM, Brian Masney wrote:
> > On Thu, Jan 12, 2017 at 11:02:14AM -0700, Stephen Warren wrote:
> > > On 01/12/2017 01:57 AM, Brian Masney wrote:
> > > > The bcm2835 driver polls the monitor and selects the highest re
From: Wenbin Song
The default MSI node in kernel tree is for LS1043A rev1.0 silicon, if
rev1.1 silicon used, need to fixup the MSI node to match it.
Signed-off-by: Wenbin Song
Signed-off-by: Mingkai Hu
Signed-off-by: Hou Zhiqiang
---
v7:
- Use a new MSI node on rev1.1.
arch/arm/cpu/armv8/f
Hi all,
people have repeatedly asked me how I generate the U-Boot release
statistics, or if they can use the tools to generate similar data for
other projects, etc.
To avoid such requests in the future and to make the information
easier available and the whole process more transparent, I decided
> -Original Message-
> From: york sun
> Sent: Friday, January 13, 2017 1:09 AM
> To: Y.B. Lu; u-boot@lists.denx.de
> Subject: Re: [U-Boot, v3, 3/3] armv8: ls1012a: define esdhc_status_fixup
> for RDB board
>
> On 12/07/2016 07:42 PM, Yangbo Lu wrote:
> > On LS1012ARDB board, three dual 1:4
The Zynq can also boot from QSPI or NAND, and environment scripting
uses "qspiboot" and "nandboot" already. Add these to the board init
routines so that modeboot is properly set to one of these values when
the mode bits indicate so.
Signed-off-by: Mike Looijmans
---
board/xilinx/zynq/board.c | 6
Hi,
On 13.1.2017 14:04, Mike Looijmans wrote:
> The Zynq can also boot from QSPI or NAND, and environment scripting
> uses "qspiboot" and "nandboot" already. Add these to the board init
> routines so that modeboot is properly set to one of these values when
> the mode bits indicate so.
>
> Signed
Ah, missed that. I noticed that "run $modeboot" didn't work for QSPI in the
2017.1 tag, hadn't seen that one yet.
On 13-01-17 14:18, Michal Simek wrote:
Hi,
On 13.1.2017 14:04, Mike Looijmans wrote:
The Zynq can also boot from QSPI or NAND, and environment scripting
uses "qspiboot" and "nand
> > Am 13.01.2017 um 08:50 schrieb Alison Wang :
> >
> > For 64-bit kernel, there is a warning about x1-x3 nonzero in
> violation
> > of boot protocol. x3 should be reset to zero before jumping to the
> > kernel.
> >
> > This patch will adjust the parameters to transfer and make sure x3 is
> > zero
On Thu, Jan 12, 2017 at 07:18:57PM -0700, Simon Glass wrote:
> Hi Tom,
>
> This includes rockchip Ethernet support and various other minor fixes/changes.
>
>
> The following changes since commit 4386feb73da7946fc79b55c4fa41c6dd66dcb2e2:
>
> SPL: Adjust more debug prints for ulong entry_point
On Thu, Jan 12, 2017 at 01:47:32PM +, Ryan Harkin wrote:
> On 12 January 2017 at 12:25, Mark Rutland wrote:
> > On Tue, Jan 10, 2017 at 06:50:19PM +, Jon Medhurst (Tixy) wrote:
> >> On Tue, 2017-01-10 at 18:34 +, Mark Rutland wrote:
> >> > Looking at the git log for arch/arm64/boot/dts
For 64-bit kernel, there is a warning about x1-x3 nonzero in violation
of boot protocol. x3 should be reset to zero before jumping to the
kernel.
This patch will adjust the parameters to transfer and make sure x3 is
zero.
Signed-off-by: Alison Wang
---
arch/arm/cpu/armv8/transition.S | 44 +
On Fri, Jan 13, 2017 at 11:48 AM, Brian Masney wrote:
> On Thu, Jan 12, 2017 at 11:47:48AM -0700, Stephen Warren wrote:
>> On 01/12/2017 11:32 AM, Brian Masney wrote:
>> > On Thu, Jan 12, 2017 at 11:02:14AM -0700, Stephen Warren wrote:
>> > > On 01/12/2017 01:57 AM, Brian Masney wrote:
>> > > > Th
On 01/13/17 13:20, Tomas Melin wrote:
> Enable support for loading a splash image from within a FIT image.
> The image is assumed to be generated with mkimage -E flag to hold
> the data external to the FIT.
>
> Signed-off-by: Tomas Melin
Acked-by: Igor Grinberg
--
Regards,
Igor.
_
Hi,
In message <20170113120449.9bc2b100...@atlas.denx.de> I wrote:
>
> To avoid such requests in the future and to make the information
> easier available and the whole process more transparent, I decided to
> move my so far local git repository to our public git server, see [1].
>
> The configu
On Fri, 13 Jan 2017 13:20:13 +0200
Tomas Melin tomas.me...@vaisala.com wrote:
> Sort include files in accordance to U-Boot coding style.
>
> Signed-off-by: Tomas Melin
> ---
>
> Changes in v5:
> - None
>
> Changes in v4:
> - Added missing changelog
>
> Changes in v3:
> - Change patch order so
On Fri, 13 Jan 2017 13:20:14 +0200
Tomas Melin tomas.me...@vaisala.com wrote:
> Enable support for loading a splash image from within a FIT image.
> The image is assumed to be generated with mkimage -E flag to hold
> the data external to the FIT.
>
> Signed-off-by: Tomas Melin
> ---
>
> Changes
On 13 January 2017 at 14:19, Mark Rutland wrote:
> On Thu, Jan 12, 2017 at 01:47:32PM +, Ryan Harkin wrote:
>> On 12 January 2017 at 12:25, Mark Rutland wrote:
>> > On Tue, Jan 10, 2017 at 06:50:19PM +, Jon Medhurst (Tixy) wrote:
>> >> On Tue, 2017-01-10 at 18:34 +, Mark Rutland wrote
Hi,
Here is a problem I presently meet, any help or track to follow would be
welcome.
My U-boot (2016.09) loads a kernel and a dtb, and "bootm" all this. This is
my reference, and this is correctly running.
>From this, I'm trying to implement FIT image management, so I enabled
CONFIG_FIT.
On th
On 01/13/2017 04:48 AM, Brian Masney wrote:
On Thu, Jan 12, 2017 at 11:47:48AM -0700, Stephen Warren wrote:
On 01/12/2017 11:32 AM, Brian Masney wrote:
On Thu, Jan 12, 2017 at 11:02:14AM -0700, Stephen Warren wrote:
On 01/12/2017 01:57 AM, Brian Masney wrote:
The bcm2835 driver polls the moni
On Fri, Jan 13, 2017 at 6:13 PM, Nicolas le bayon wrote:
> Hi,
>
> Here is a problem I presently meet, any help or track to follow would be
> welcome.
>
> My U-boot (2016.09) loads a kernel and a dtb, and "bootm" all this. This is
> my reference, and this is correctly running.
>
> From this, I'm t
Hi,
On Wed, 11 Jan 2017 10:36:48 +0800
Songjun Wu songjun...@microchip.com wrote:
> Add driver-model support to this driver.
>
> Signed-off-by: Songjun Wu
> ---
>
> Changes in v2:
> - Due to the peripheral clock driver improvement, remove
> the unneccessary clock calling.
>
> drivers/video
On Wed, 30 Nov 2016 14:30:59 +0100
Anatolij Gustschin ag...@denx.de wrote:
> If the splash file doesn't exist, the booting stops bricking
> the boards. Check return value of prepare function and stop
> decoding the logo data if splash prepare stage failed.
>
> Signed-off-by: Anatolij Gustschin
>
On 01/11/2017 05:39 PM, Y.B. Lu wrote:
> Hi York,
>
> Could you help to merge this patchset if there is no any changes needed?
> Thanks :)
>
It's in my queue.
York
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boo
From: "tomas.me...@vaisala.com"
SPLASH_STORAGE_RAW is defined as 0, so a check against & will
never be true. These flags are never combined so do a check
against == instead.
Signed-off-by: Tomas Melin
Reviewed-by: Tom Rini
---
Changes in v2:
- rebased on u-boot-video/master
common/splash_so
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of memory device booting. Memory device booting
is handled separatly from peripheral booting on HS devices as the load
address changes.
This defconfig is the same as for the non-secure part, except for:
On 13/01/17 17:13, Nicolas le bayon wrote:
> Hi,
>
> Here is a problem I presently meet, any help or track to follow would be
> welcome.
>
> My U-boot (2016.09) loads a kernel and a dtb, and "bootm" all this. This is
> my reference, and this is correctly running.
>
> From this, I'm trying to imp
Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from
which the board can actually boot from.
Enable the SPL support for the SPI controller and SPI flash to allow
putting the SPL, the DT and U-Boot proper into there. This will let
a board boot without an SD card inserted.
The fla
The OrangePi Zero can happily use the EMAC along with its integrated
PHY to use Ethernet (for TFTP booting, for instance).
Add the emac node to the board .dts by copying it from the OrangePi One
DT.
Signed-off-by: Andre Przywara
---
arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 11 +++
Hi,
two small patches on top of sunxi/next to enable Ethernet and SPI flash.
Was there any reason the emac node was omitted from the DT patch (as
it is in the OrangePi One DT, which I belive the Zero has copied from)?
Also newer versions of the board seem all to come with SPI flash soldered,
so l
On Fri, Jan 13, 2017 at 12:23:13PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Here is the fixing patches.
> Could you pull these patches on u-boot/master?
>
> The following changes since commit 4386feb73da7946fc79b55c4fa41c6dd66dcb2e2:
>
> SPL: Adjust more debug prints for ulong entry_point
On Fri, Jan 13, 2017 at 02:57:36PM -0600, Andrew F. Davis wrote:
> Add a new defconfig file for the AM335x High Security EVM. This config
> is specific for the case of memory device booting. Memory device booting
> is handled separatly from peripheral booting on HS devices as the load
> address ch
Hi,
I have a query regarding SDRAM initialization part in U boot code.
In Initdram function after prerecharge all bank command is delay required or
reading from particular address is required?
In our u boot code see below part highlighted in GREEN color is added after
precharge all bank comman
Hi Lukas/Jaehoon
On 13 January 2017 at 04:30, Lukasz Majewski wrote:
> Hi,
>
>> Hi Anand,
>>
>> On 01/12/2017 05:32 PM, Anand Moon wrote:
>> > Hi All,
>> >
>> > I tried to compile the latest u-boot for Odroid U3.
>> > issue is that Ethernet is not able to detected.
>
> Please try "usb start".
>
>
2017年1月14日 10:06于 Andre Przywara 写道:
>
> Hi,
>
> two small patches on top of sunxi/next to enable Ethernet and SPI flash.
> Was there any reason the emac node was omitted from the DT patch (as
> it is in the OrangePi One DT, which I belive the Zero has copied from)?
Because the DT is directly
50 matches
Mail list logo