From: Jagan Teki
Mark FSL_ESPI as DEPRECATED, this so the resulting build shows
warning for deprecated configuration enabled and associated code
will remove in v2019.07 release.
Cc: Oleksandr Zhadan and Michael Durrant
Signed-off-by: Jagan Teki
[trini: Switch to DEPRECATED]
Signed-off-by: Tom
From: Jagan Teki
Mark LPC32XX_SSP as DEPRECATED, this so the resulting build shows
warning for deprecated configuration enabled and associated code
will remove in v2019.07 release.
Cc: Albert ARIBAUD
Signed-off-by: Jagan Teki
Acked-by: Vladimir Zapolskiy
Acked-by: Sylvain Lemieux
[trini:
On 5/19/19 3:52 PM, Tom Rini wrote:
> From: Jagan Teki
>
> Mark SH_SPI as DEPRECATED, this so the resulting build shows
> warning for a deprecated configuration enabled and associated code
> will remove in v2019.07 release.
>
> Cc: Marek Vasut
> Signed-off-by: Jagan Teki
> [trini: Switch to
On Fri, May 03, 2019 at 07:51:42PM +0200, Philippe Reynes wrote:
> This board define the flag CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
> but it's a mistake. It's a workaround for an issue in nand core.
> This issue was fixed by the commit 5f626e78491c ("mtd: nand: raw:
> Fix
On Fri, May 03, 2019 at 07:43:08PM +0200, Philippe Reynes wrote:
> The watchdog should use a clock at 50 Mhz, so
> instead of using the clock osc (200 Mhz), we
> define a reference clock at 50Mhz and use it
> for both watchdog.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Stefan Roese
On Fri, May 03, 2019 at 07:51:43PM +0200, Philippe Reynes wrote:
> This board define the flag CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
> but it's a mistake. It's a workaround for an issue in nand core.
> This issue was fixed by the commit 5f626e78491c ("mtd: nand: raw:
> Fix
On Mon, Mar 25, 2019 at 03:55:16PM +0100, Michal Simek wrote:
> Prioritize external dtb if its passed via EXT_DTB
> than the dtb that was built in the tree. With this
> patch it appends the specified external dtb to
> the u-boot image.
>
> Signed-off-by: Michal Simek
> Signed-off-by: Siva Durga
On 5/19/19 10:44 PM, Tom Rini wrote:
> On Mon, Mar 25, 2019 at 03:55:16PM +0100, Michal Simek wrote:
>
>> Prioritize external dtb if its passed via EXT_DTB
>> than the dtb that was built in the tree. With this
>> patch it appends the specified external dtb to
>> the u-boot image.
>>
>>
Add driver for the Renesas RCar PCIe controller present on Gen3 SoCs.
The PCIe on Gen3 is used both to connect external PCIe peripherals.
Signed-off-by: Marek Vasut
Cc: Bin Meng
Cc: Nobuhiro Iwamatsu
---
V2: - Rename the driver
- Use platdata instead of priv
---
drivers/pci/Kconfig
Enable PCIe driver on R-Car Gen3 Salvator-X boards.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
V2: Rename the driver
---
configs/r8a7795_salvator-x_defconfig | 4
configs/r8a77965_salvator-x_defconfig | 4
configs/r8a7796_salvator-x_defconfig | 4
3 files changed, 12
On Fri, May 03, 2019 at 09:40:57AM -0400, Trevor Woerner wrote:
> This config is the only config that uses:
> #define CONFIG_SYS_DCACHE_OFF 1
> in its #define.
>
> Remove the superfluous "1" so this cache #define is like all the others.
>
> Signed-off-by: Trevor Woerner
Applied to
On Fri, May 03, 2019 at 09:40:56AM -0400, Trevor Woerner wrote:
> According to De Morgan's Law[1]:
> !(A && B) = !A || !B
> !(A || B) = !A && !B
>
> There are 5 places in the code where we find:
> #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
> and 4
On Fri, May 03, 2019 at 09:40:58AM -0400, Trevor Woerner wrote:
> Eventually these configuration items will be converted to Kconfig,
> therefore there's little point in leaving commented-out versions of
> them in include/configs.
>
> Signed-off-by: Trevor Woerner
Applied to u-boot/master,
On Fri, May 03, 2019 at 09:40:59AM -0400, Trevor Woerner wrote:
> CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
> parameters; only for the ARC architecture. This patch turns these two
> parameters into Kconfig items everywhere else they are found.
>
> All of the
Hi,
On Sat, May 18, 2019 at 6:05 PM Simon Glass wrote:
>
> In general we should avoid calling malloc() and free() repeatedly in
> U-Boot lest we turn it into tianocore. In SPL this can make SPI flash
> unusable since free() is often a nop and allocation space is limited.
>
> In any case, these
Clean up the whitespaces in macros, no functional change.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Cc: Peng Fan
---
drivers/mmc/renesas-sdhi.c | 20 ++--
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/renesas-sdhi.c
Since Gen3 SDHI has an internal DS signal AC-spec violation in HS400 mode,
CRC-error may occur in read command in HS400 mode. This phoenomenon occurs
at low/high temperature.
To fix this, after completion of HS400 tuning, enable manual calibration.
However, Gen3 M3 Ver.1.2 or earlier and H3 1.x
The following changes since commit 98b3156b0df4b0df9cb3a0bbfc240d0c4edd2638:
Merge branch 'master' of git://git.denx.de/u-boot-samsung (2019-05-16
07:09:59 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-efi.git tags/efi-2019-07-rc3-2
for you to fetch changes up to
On Wed, May 15, 2019 at 08:37:52AM -0500, Adam Ford wrote:
> The MMC controller enabled card detect, so this patch enables
> the GPIO driver in SPL to support it.
>
> Signed-off-by: Adam Ford
>
> diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
> index
On Thu, May 09, 2019 at 05:34:15PM +0200, Heinrich Schuchardt wrote:
> Configuration option CONFIG_CMD_BOOTEFI_SELFTEST is useful for the
> development of the UEFI sub-system. For production it is not needed.
>
> Remove CONFIG_CMD_BOOTEFI_SELFTEST from bcm963158_ram_defconfig.
>
> Suggested-by:
On 5/20/19 12:08 AM, Tom Rini wrote:
> On Mon, May 20, 2019 at 12:03:45AM +0200, Marek Vasut wrote:
>> On 5/19/19 10:44 PM, Tom Rini wrote:
>>> On Mon, Mar 25, 2019 at 03:55:16PM +0100, Michal Simek wrote:
>>>
Prioritize external dtb if its passed via EXT_DTB
than the dtb that was built
On Wed, Feb 13, 2019 at 08:32:24PM +0800, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> This would print out all the FPGA node names setting to fpga property.
>
> Signed-off-by: Tien Fong Chee
> ---
> common/image-fit.c | 14 +++---
> 1 files changed, 11 insertions(+),
On Fri, May 03, 2019 at 07:43:07PM +0200, Philippe Reynes wrote:
> The watchdog should use a clock at 50 Mhz, so
> instead of using the clock osc (200 Mhz), we
> define a reference clock at 50Mhz and use it
> for both watchdog.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Stefan Roese
On Fri, May 03, 2019 at 09:41:00AM -0400, Trevor Woerner wrote:
> While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
> where these configuration items are conditional on SPL. This commit adds SPL
> variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
On Tue, May 14, 2019 at 07:35:02PM +0100, luca.bocca...@gmail.com wrote:
> From: Luca Boccassi
>
> Add an option to open files in read-only mode in mmap_fdt so
> that fit_check_sign can be used to inspect files on read-only
> filesystems.
> For example, this is useful when a key is shipped in a
On Mon, May 06, 2019 at 04:17:56PM +0200, Fabien Parent wrote:
> Instead of using the watchdog, let's use PSCI to perform the reset
> of the SoC.
>
> Signed-off-by: Fabien Parent
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, May 20, 2019 at 12:03:45AM +0200, Marek Vasut wrote:
> On 5/19/19 10:44 PM, Tom Rini wrote:
> > On Mon, Mar 25, 2019 at 03:55:16PM +0100, Michal Simek wrote:
> >
> >> Prioritize external dtb if its passed via EXT_DTB
> >> than the dtb that was built in the tree. With this
> >> patch it
Implement the SetTime() runtime service.
Extend the real time clock selftest to check setting the clock.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/efi_runtime.c| 73 -
lib/efi_selftest/efi_selftest_rtc.c | 56 ++
2 files
According to the UEFI spec 2.8 the GetTime() runtime service should return
EFI_UNSUPPORTED if the real time clock is not available.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/efi_runtime.c | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git
On Thu, May 09, 2019 at 05:35:12PM +0200, Heinrich Schuchardt wrote:
> Configuration option CONFIG_CMD_BOOTEFI_SELFTEST is useful for the
> development of the UEFI sub-system. For production it is not needed.
>
> Remove CONFIG_CMD_BOOTEFI_SELFTEST from bcm968580xref_ram_defconfig.
>
>
On Tue, May 14, 2019 at 09:05:26PM +0200, Alex Deymo wrote:
> This takes the latest changes from AOSP from the file
> bootloader_message/include/bootloader_message/bootloader_message.h
> in the repository
> https://android.googlesource.com/platform/bootable/recovery
> and re-licensed them to
On Wed, May 15, 2019 at 04:18:35PM -0500, Adam Ford wrote:
> There appears to be enough RAM to support cache in SPL.
> This pach enables block cache in SPL.
>
> Signed-off-by: Adam Ford
>
> diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
> index 09c6147e2d..8c16d5c4f5
On Fri, May 03, 2019 at 07:51:44PM +0200, Philippe Reynes wrote:
> This board define the flag CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
> but it's a mistake. It's a workaround for an issue in nand core.
> This issue was fixed by the commit 5f626e78491c ("mtd: nand: raw:
> Fix
On Sun, May 19, 2019 at 04:19:06PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This PR includes the following updates to U-Boot x86 support:
>
> - Allow coreboot to process unhandled tags
> - Enable NVMe on QEMU x86_64 target
>
> The following changes since commit
On Fri, May 03, 2019 at 07:43:06PM +0200, Philippe Reynes wrote:
> The function bcm6345_wdt_start use the argument timeout
> as tick but it should be used as milliseconds.
>
> A clock is added as requirement for this driver.
> The frequency of the clock is then used to convert the
> millisecond
Hi Simon,
> Hi Lukasz,
>
> On Sat, 18 May 2019 at 15:28, Lukasz Majewski wrote:
> >
> > Hi Simon,
> >
> > This is not the newest patch set version of CCF (v3 vs. v4), but the
> > comments/issues apply.
> >
> > > Hi Lukasz,
> > >
> > > On Thu, 25 Apr 2019 at 04:30, Lukasz Majewski
> > >
At the OSFC conference the U-Boot logo has been used with a text. So let's
add the text to the SVG file.
Signed-off-by: Heinrich Schuchardt
---
tools/logos/u-boot_logo.svg | 116 +++-
1 file changed, 74 insertions(+), 42 deletions(-)
diff --git
On Wed, May 15, 2019 at 10:10:04PM +0100, Ibai Erkiaga wrote:
> The current prompt text for FIT external offset is identical to
> SYS_TEXT_BASE which might confuse the users. Provided more accurate
> description for the prompt text.
>
> Signed-off-by: Ibai Erkiaga
> Reviewed-by: Marek Vasut
On Tue, May 07, 2019 at 09:17:02PM +0200, Marek Vasut wrote:
> Set the spl_image->fdt_addr pointer both for simple fitImage configuration
> as well as full fitImage configuration, to let spl_perform_fixups() access
> the DT and perform modifications to it if necessary.
>
> Signed-off-by: Marek
On Tue, May 14, 2019 at 10:33:41AM +0200, Christian Gmeiner wrote:
> Also get rid of ahci_setup_port(..).
>
> Signed-off-by: Christian Gmeiner
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing
rk3328-rock64.dts has been taken from Linux kernel commit
cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")
with minor modifications (drop nodes not known by rk3328.dtsi).
Signed-off-by: Matwey V. Kornilov
---
arch/arm/dts/Makefile | 3 +-
From: Kever Yang
rk3328 SPL is locate at dram, so do not have strict size limit,
suppose to enable storage media controller driver, load ATF and
U-Boot, then boot into ATF.
Signed-off-by: Kever Yang
[cherry picked from
This series adds initial basic support for Pine64 Rock64 board.
The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM
Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64 board.
Unfortunately, proprietary TPL is stil required for deploy:
From: Kever Yang
Add SPL support for rk3328, default with of-platdata enabled.
Signed-off-by: Kever Yang
[cherry picked from
https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b
with minor modifications]
Signed-off-by: Matwey V. Kornilov
---
From: Kever Yang
Enable SPL support and some related option in Kconfig.
Signed-off-by: Kever Yang
[cherry picked from
https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d
with minor modifications]
Signed-off-by: Matwey V. Kornilov
---
On Wed, May 15, 2019 at 11:38 PM Bin Meng wrote:
>
> When dma_addr_t is u32 in 64-bit, there are some warnings when
> building NVME driver. Fix it by doing an additional (long) cast.
>
> Signed-off-by: Bin Meng
> ---
>
> drivers/nvme/nvme.c | 4 ++--
> drivers/nvme/nvme_show.c | 4 ++--
>
Hi Tom,
This PR includes the following updates to U-Boot x86 support:
- Allow coreboot to process unhandled tags
- Enable NVMe on QEMU x86_64 target
The following changes since commit 98b3156b0df4b0df9cb3a0bbfc240d0c4edd2638:
Merge branch 'master' of git://git.denx.de/u-boot-samsung
On Sun, May 19, 2019 at 12:33 AM Simon Glass wrote:
>
> On Wed, 15 May 2019 at 09:52, Bin Meng wrote:
> >
> > NVMe was turned on in qemu-x86 but somehow we missed it for 64-bit.
> >
> > Signed-off-by: Bin Meng
> > ---
> >
> > configs/qemu-x86_64_defconfig | 1 +
> > 1 file changed, 1
Hi Kever,
чт, 16 мая 2019 г. в 09:56, Kever Yang :
>
> Hi Matwey,
>
>
> On 05/08/2019 02:34 PM, Matwey V. Kornilov wrote:
> > rk3328-rock64.dts has been taken from Linux kernel with minor
> > modifications.
>
> Could you detail about which commit of kernel do you take
> this dts from?
Sure.
>
>
The ROCK64 is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64
board. The proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd \
-d
Hi Kever,
чт, 16 мая 2019 г. в 10:01, Kever Yang :
>
> Hi Matwey,
>
> Please add commit message for the patch.
>
> On 05/08/2019 02:34 PM, Matwey V. Kornilov wrote:
> > Signed-off-by: Matwey V. Kornilov
> > ---
> > configs/rock64-rk3328_defconfig | 91
> >
On Sun, May 19, 2019 at 6:24 AM Marek Vasut wrote:
>
> Add driver for the Renesas RCar PCIe controller present on Gen3 SoCs.
> The PCIe on Gen3 is used both to connect external PCIe peripherals.
>
> Signed-off-by: Marek Vasut
> Cc: Bin Meng
> Cc: Nobuhiro Iwamatsu
> ---
> drivers/pci/Kconfig
On Sun, May 19, 2019 at 2:00 AM Simon Glass wrote:
>
> This struct is not defined in this header file. Add a forward declaration
> so that it can be included in any context.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/include/asm/coreboot_tables.h | 2 ++
> 1 file changed, 2 insertions(+)
Add a new option, CONFIG_DEPRECATED, for code that relies on deprecated
functionality and has not been converted past the deadline for
conversion.
Signed-off-by: Tom Rini
---
Kconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/Kconfig b/Kconfig
index da208d65a32c..e780fce8efdb
From: Jagan Teki
Mark SH_SPI as DEPRECATED, this so the resulting build shows
warning for a deprecated configuration enabled and associated code
will remove in v2019.07 release.
Cc: Marek Vasut
Signed-off-by: Jagan Teki
[trini: Switch to DEPRECATED]
Signed-off-by: Tom Rini
---
From: Jagan Teki
We have a warning text for non dm converted spi drivers, but the plan is
to mark all these respective drivers with CONFIG_DEPRECATED.
So, trigger a warning saying that these driver configurations and
associated code will remove in v2019.07 (earlier plan is to remove it
from
From: Jagan Teki
Mark MXS_SPI as DEPRECATED, this so the resulting build shows
warning for broken configuration enabled and associated code
will remove in v2019.07 release.
Cc: Marek Vasut
Cc: Fabio Estevam
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
[trini: Switch to DEPRECATED]
In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have
the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this
in the Kconfigs.
Signed-off-by: Tom Rini
---
arch/Kconfig | 2 ++
cmd/Kconfig | 3 +++
env/Kconfig | 2 +-
3 files changed, 6 insertions(+), 1
Hi Simon,
> Hi Lukasz,
>
> On Sat, 18 May 2019 at 14:49, Lukasz Majewski wrote:
> >
> > Hi Simon,
> >
> > > kHi Lukasz,
> > >
> > > On Thu, 16 May 2019 at 16:11, Lukasz Majewski
> > > wrote:
> > > >
> > > > This patch series brings the files from Linux kernel to provide
> > > > clocks
On Sun, May 19, 2019 at 08:55:53AM +0800, Bin Meng wrote:
> Hi Tom,
>
> On Sun, May 19, 2019 at 12:07 AM Simon Glass wrote:
> >
> > Hi Tom,
> >
> > On Sat, 18 May 2019 at 06:13, Tom Rini wrote:
> > >
> > > Hey guys,
> > >
> > > Looking at https://travis-ci.org/trini/u-boot/jobs/534037240 this
From: Jagan Teki
If configured target has deprecated configs enabled, trigger a warning
about this.
Cc: Heinrich Schuchardt
Signed-off-by: Jagan Teki
[trini: Change from BROKEN to DEPRECATED]
Signed-off-by: Tom Rini
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git
From: Jagan Teki
Mark SOFT_SPI as DEPRECATED, this so the resulting build shows
warning for deprecated configuration enabled and associated code
will remove in v2019.07 release.
Cc: Vasily Khoruzhick
Signed-off-by: Jagan Teki
[trini: Switch to DEPRECATED]
Signed-off-by: Tom Rini
---
On 4/4/19 3:45 PM, Eugeniu Rosca wrote:
> Hi Marek,
Hi,
> On Tue, Apr 02, 2019 at 05:45:29AM +0200, Marek Vasut wrote:
>> On 3/13/19 4:25 PM, Eugeniu Rosca wrote:
>>> On Tue, Mar 12, 2019 at 10:11:21PM +0100, Marek Vasut wrote:
On 3/12/19 8:30 PM, Eugeniu Rosca wrote:
> Hi Marek cc:
> Subject: [RFC] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
>
> Currently, when the spl_boot_device checks the boot device, it will only
> return MMC1 when it's either sd or eMMC regardless of whether or not it's
> MMC1 or MMC2. This is a problem when booting from MMC2 if MMC isn't
>
> Subject: [PATCH] imx8mq_evk: Staticize when appropriate
>
> Staticize 'spl_dram_init' and 'i2c_pad_info1' to fix the following sparse
> warnings:
>
> board/freescale/imx8mq_evk/spl.c:30:6: warning: symbol 'spl_dram_init' was
> not declared. Should it be static?
>
Pull DRAM layout configuration code into rcar-common.c instead of
having it in multiple copies across board files. This poses no
change for Salvator-X/XS, ULCB and Ebisu boards, however it adds
a bit of extra code for Draak and Eagle boards, which now gain
the capability of being passed in the
On 5/19/19 11:57 PM, Heinrich Schuchardt wrote:
> At the OSFC conference the U-Boot logo has been used with a text. So let's
> add the text to the SVG file.
>
> Signed-off-by: Heinrich Schuchardt
Can we also get rid of those windows, the periscope, and the propeller ?
They look really
Move CONFIG_PXA_MMC_GENERIC to Kconfig.
Signed-off-by: Marcel Ziswiler
---
configs/colibri_pxa270_defconfig | 1 +
configs/zipitz2_defconfig| 1 +
drivers/mmc/Kconfig | 8
include/configs/pxa-common.h | 7 ---
include/configs/zipitz2.h| 8
Enable CONFIG_DM_MMC.
Signed-off-by: Marcel Ziswiler
---
configs/colibri_pxa270_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig
index c9d7e4e7ce..609855fe7d 100644
--- a/configs/colibri_pxa270_defconfig
+++
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut
Cc: Chris Brandt
Cc: Nobuhiro Iwamatsu
Cc: Vladimir Zapolskiy
Cc: Yoshihiro Shimoda
---
arch/sh/Kconfig | 5 -
On Sun, May 19, 2019 at 9:45 PM Marcel Ziswiler wrote:
>
> Annotate endifs to make CONFIG_IS_ENABLED(DM_MMC) or not more obvious.
>
> Signed-off-by: Marcel Ziswiler
Reviewed-by: Fabio Estevam
Thanks
___
U-Boot mailing list
U-Boot@lists.denx.de
When sd/mmc work at DDR mode, like HS400/HS400ES/DDR52/DDR50
mode, the output clock rate is half of the internal clock rate.
But first need set DDR_EN bit first , then hardware will
automatically divide the usdhc clock.
The mixctrl register exits on new i.MX SoC since i.MX6, so add
CONFIG check.
Hello Bartosz,
Am 17.05.2019 um 11:17 schrieb Bartosz Golaszewski:
From: Bartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in
Clean-up platform data include file by using BIT macro and converting
indentation with spaces to tabs.
Signed-off-by: Marcel Ziswiler
---
include/dm/platform_data/serial_pxa.h | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/dm/platform_data/serial_pxa.h
Add missing space before a comment delimiter.
Signed-off-by: Marcel Ziswiler
---
drivers/mmc/mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 456c1b4cc9..ede528dc5a 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut
Cc: Chris Brandt
Cc: Nobuhiro Iwamatsu
Cc: Vladimir Zapolskiy
Cc: Yoshihiro Shimoda
---
arch/sh/Kconfig| 5 -
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut
Cc: Chris Brandt
Cc: Nobuhiro Iwamatsu
Cc: Vladimir Zapolskiy
Cc: Yoshihiro Shimoda
---
arch/sh/Kconfig | 5 -
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut
Cc: Chris Brandt
Cc: Nobuhiro Iwamatsu
Cc: Vladimir Zapolskiy
Cc: Yoshihiro Shimoda
---
arch/sh/Kconfig| 5 -
board/ms7722se/Kconfig |
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut
Cc: Chris Brandt
Cc: Nobuhiro Iwamatsu
Cc: Vladimir Zapolskiy
Cc: Yoshihiro Shimoda
---
arch/sh/Kconfig| 5 --
board/ms7750se/Kconfig |
Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.
Signed-off-by: Marek Vasut
Cc: Chris Brandt
Cc: Nobuhiro Iwamatsu
Cc: Vladimir Zapolskiy
Cc: Yoshihiro Shimoda
---
arch/sh/Kconfig| 5 -
board/espt/Kconfig | 9 --
This series, after some initial clean-up, ultimately adds support for
the driver model (DM) in the PXA MMC driver.
Marcel Ziswiler (10):
mmc: add missing space before comment delimiter
mmc: fsl_esdhc: annotate endifs
serial: pxa: clean-up platform data include file
Makefile: allow
Allow for CONFIG_DM_MMC with platform data rather than
CONFIG_OF_CONTROL.
Signed-off-by: Marcel Ziswiler
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 6eb08a5724..eb08aaea75 100644
--- a/Makefile
+++ b/Makefile
@@ -926,7 +926,7 @@
Add driver model (DM) support.
Signed-off-by: Marcel Ziswiler
---
drivers/mmc/pxa_mmc_gen.c | 160 -
include/dm/platform_data/pxa_mmc_gen.h | 22
2 files changed, 154 insertions(+), 28 deletions(-)
create mode 100644
Enable CONFIG_CMD_DM.
Signed-off-by: Marcel Ziswiler
---
configs/colibri_pxa270_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig
index a3c07d5887..c9d7e4e7ce 100644
--- a/configs/colibri_pxa270_defconfig
+++
Add MMC platform data.
While at it also fix trivial checkpatch.pl issues.
Signed-off-by: Marcel Ziswiler
---
board/toradex/colibri_pxa270/colibri_pxa270.c | 20 ++-
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c
Gracefully handle alias seq in the platform data rather than OF case.
Signed-off-by: Marcel Ziswiler
---
drivers/core/read.c | 4 +++-
include/dm/read.h | 4
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/core/read.c b/drivers/core/read.c
index
Annotate endifs to make CONFIG_IS_ENABLED(DM_MMC) or not more obvious.
Signed-off-by: Marcel Ziswiler
---
drivers/mmc/fsl_esdhc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 1b7de74a72..0742cd64e1 100644
---
Hi Marek,
> Subject: Re: [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container
> format file
>
> On 5/20/19 3:30 AM, Peng Fan wrote:
> > Hi Simon,
> >
> >> Subject: Re: [PATCH 4/6] spl: mmc: support loading i.MX container
> >> format file
> >>
> >> Hi Peng,
> >>
> >> On Tue, 7 May 2019
On 5/20/19 2:44 AM, Marcel Ziswiler wrote:
> Add driver model (DM) support.
>
> Signed-off-by: Marcel Ziswiler
>
> ---
>
> drivers/mmc/pxa_mmc_gen.c | 160 -
> include/dm/platform_data/pxa_mmc_gen.h | 22
> 2 files changed, 154 insertions(+), 28
On 5/20/19 2:45 AM, Marcel Ziswiler wrote:
> Add MMC platform data.
>
> While at it also fix trivial checkpatch.pl issues.
>
> Signed-off-by: Marcel Ziswiler
>
> ---
>
> board/toradex/colibri_pxa270/colibri_pxa270.c | 20 ++-
> 1 file changed, 15 insertions(+), 5 deletions(-)
On 5/20/19 2:45 AM, Marcel Ziswiler wrote:
> Enable CONFIG_CMD_DM.
>
> Signed-off-by: Marcel Ziswiler
>
> ---
>
> configs/colibri_pxa270_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/configs/colibri_pxa270_defconfig
> b/configs/colibri_pxa270_defconfig
> index
On 5/20/19 2:44 AM, Marcel Ziswiler wrote:
> Clean-up platform data include file by using BIT macro and converting
> indentation with spaces to tabs.
>
> Signed-off-by: Marcel Ziswiler
>
> ---
>
> include/dm/platform_data/serial_pxa.h | 8
> 1 file changed, 4 insertions(+), 4
Hi Simon,
> Subject: Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file
>
> Hi Peng,
>
> On Tue, 7 May 2019 at 06:52, Peng Fan wrote:
> >
> > i.MX8 only support AHAB secure boot with Container format image, we
> > could not use FIT to support secure boot, so introduce
On 5/20/19 3:30 AM, Peng Fan wrote:
> Hi Simon,
>
>> Subject: Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file
>>
>> Hi Peng,
>>
>> On Tue, 7 May 2019 at 06:52, Peng Fan wrote:
>>>
>>> i.MX8 only support AHAB secure boot with Container format image, we
>>> could not use FIT
On Sun, May 19, 2019 at 11:56 PM Marek Vasut wrote:
>
> Add driver for the Renesas RCar PCIe controller present on Gen3 SoCs.
> The PCIe on Gen3 is used both to connect external PCIe peripherals.
>
> Signed-off-by: Marek Vasut
> Cc: Bin Meng
> Cc: Nobuhiro Iwamatsu
> ---
> V2: - Rename the
On Sun, May 19, 2019 at 11:57 PM Marek Vasut wrote:
>
> Enable PCIe driver on R-Car Gen3 Salvator-X boards.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> ---
> V2: Rename the driver
> ---
> configs/r8a7795_salvator-x_defconfig | 4
> configs/r8a77965_salvator-x_defconfig | 4
Hi Lukasz,
Do you expect me to pick this patch, just see this patch was delegated to
Stefano?
Regards,
Peng.
> Subject: RE: [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock
> setting issue"
>
> > Subject: RE: [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock
> > setting
97 matches
Mail list logo
