Hi Sughosh,
On Mon, Jul 2, 2012 at 9:24 PM, Sughosh Ganu urwithsugh...@gmail.com wrote:
hi,
While testing on hawkboard with the latest commit, i hit an issue of
commands not being accepted.
hawkboard reset
Unknown command '�' - try 'help'
hawkboard
Running git bisect showed that
Hi
I am working on one MIPS based board ap91 which has x1 Pci Express 1.1
interface..There is only one host and one endpoint .
But when i am using uboot commands OR any driver function (hose scan etc..)
,i am keep on getting devices on every bus...
Is there any bug or issue in Cmd_pci .c file ?/
Hello, Måns
Thank you for summarizing.
I am not against you.
I'm OK either Allow unaligned access in U-Boot setting or
Specify compiler not to generate unaligned memory access
or other.
I just want to solve hung-up by unaligned access.
I follow custodian's decision.
(2012/07/03 1:14), Måns
-Original Message-
From: Michael Walle [mailto:mich...@walle.cc]
Sent: 26 June 2012 03:00
To: Prafulla Wadaskar
Cc: Joe Hershberger; u-boot@lists.denx.de; albert.u.b...@aribaud.net
Subject: Re: [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl
board support
Hi Prafulla,
-Original Message-
From: Simon Guinot [mailto:si...@sequanux.org]
Sent: 02 July 2012 14:19
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Albert Aribaud
Subject: Re: [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices
On Thu, Jun 14, 2012 at 08:18:33AM -0700, Prafulla Wadaskar
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 18:34
To: u-boot@lists.denx.de
Cc: Valentin Longchamp; Holger Brunck; Prafulla Wadaskar
Subject: [PATCH] arm/kirkwood: protect the ENV_SPI #defines
From: Valentin Longchamp
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 18:31
To: u-boot@lists.denx.de
Cc: Valentin Longchamp; Holger Brunck; Prafulla Wadaskar
Subject: [PATCH] arm/km: use spi claim bus to switch between SPI and
NAND
From: Valentin
This patch is supported DesginWare MMC Controller.
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Rajeshawari Shinde rajeshwar...@samsung.com
---
drivers/mmc/dw_mmc.c | 400
Include mmc:dw-mmc:support DesignWare MMC controller at this patchset.
dw-mmc.c is generic interface.(like sdhci.c)
For using dw-mmc controller, need to add the some samsung specific code.
Exynos specific code should be presented into exynos_dw_mmc.c
If want to use with exynos5, must enable the
To get more exactly sclk value, used the get_mmc_clk.
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c | 78
arch/arm/include/asm/arch-exynos/clk.h |1 +
2
Support DesignWare MMC Controller for Samsung Specific.
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Rajeshawari Shinde rajeshwar...@samsung.com
---
arch/arm/include/asm/arch-exynos/dwmmc.h | 36 ++
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/mmc/Makefile |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index a8e681c..eccbf55 100644
---
Dear Holger
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 19:03
To: u-boot@lists.denx.de
Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Thomas
Herzmann
Subject: [PATCH v2 02/14] arm/km: add kmcoge5un board support
For
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 19:03
To: u-boot@lists.denx.de
Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar
Subject: [PATCH v2 03/14] arm/km: convert mgcoge3un target to
km_kirkwood
Use the generic header
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 19:03
To: u-boot@lists.denx.de
Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar
Subject: [PATCH v2 04/14] arm/km: remove portl2.h and use km_kirkwood
instead
The additional
-Original Message-
From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
Sent: 21 June 2012 18:40
To: Prafulla Wadaskar
Cc: prafu...@mavell.com; holger.bru...@keymile.com; u-
b...@lists.denx.de
Subject: Re: [U-Boot] [PATCH 12/20] arm/km: add support for external
2012/6/29 Javier Martinez Canillas jav...@dowhile0.org
An OMAP specific serial driver was merged on the Linux kenel a long
time ago. So, it makes sense to default the console name to OMAP
ttyO instead of the generic ttyS naming.
Signed-off-by: Javier Martinez Canillas jav...@dowhile0.org
2012/6/29 Javier Martinez Canillas jav...@dowhile0.org
omap2plus_defconfig now has built-in compile support for EXT4 enabled
by default now. So, we can use EXT4 as the default root file system
type for MMC.
Signed-off-by: Javier Martinez Canillas jav...@dowhile0.org
---
Hello Prafulla,
I see in current mainline code:
arch/arm/include/asm/arch-kirkwood/cpu.h
35 #define KWGBE_PORT_SERIAL_CONTROL1_REG(_x) \
36 ((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c)
with results in:
if _x = 0 KW_EGIGA1_BASE and if _x = 1 KW_EGIGA0_BASE
^
On 06/29/2012 04:32 AM, Simon Glass wrote:
Hi,
On Wed, Jun 27, 2012 at 11:49 PM, Michal Simek mon...@monstr.eu
mailto:mon...@monstr.eu wrote:
On 06/28/2012 07:57 AM, Simon Glass wrote:
Hi Michal,
On Wed, Jun 27, 2012 at 10:50 PM, Michal Simek mon...@monstr.eu
On 07/03/2012 10:04 AM, Prafulla Wadaskar wrote:
Dear Holger
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 19:03
To: u-boot@lists.denx.de
Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Thomas
Herzmann
Subject: [PATCH v2
Those patches add support for composite USB download gadget.
This gadget (at least for now) is equipped with DFU download function.
A separate DFU back-end and front-end have been added.
Back-end is placed at ./drivers/dfu directory. The front-end is implemented
as USB function.
The back-end is
Composite USB download gadget support (g_dnl) for download functions.
This code works on top of composite gadget.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
drivers/usb/gadget/Makefile |1 +
Support for f_dfu USB function.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
drivers/usb/gadget/Makefile |1 +
drivers/usb/gadget/f_dfu.c | 666 +++
New, separate driver at ./drivers/dfu has been added. It allows platform
and storage independent operation of DFU.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
Makefile |1 +
Support for MMC storage devices to work with DFU framework.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
drivers/dfu/Makefile |1 +
drivers/dfu/dfu_mmc.c | 126
Support for USB UDC driver at trats board.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Minkyu Kang mk7.k...@samsung.com
---
board/samsung/trats/trats.c |9 +
1 files changed, 9
Support for u-boot's command line command dfu interface dev [list].
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
common/Makefile |1 +
common/cmd_dfu.c | 81
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/configs/trats.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/trats.h b/include/configs/trats.h
Hello Prafulla,
On 07/03/2012 10:17 AM, Prafulla Wadaskar wrote:
-Original Message-
From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
Sent: 21 June 2012 18:40
To: Prafulla Wadaskar
Cc: prafu...@mavell.com; holger.bru...@keymile.com; u-
b...@lists.denx.de
Subject: Re:
Hi, Rajeshwari,
2012/5/8 Rajeshwari Shinde rajeshwar...@samsung.com:
This patchset series adds support to enable USB 2.0 on smdk5250.
Do you have any plan to support USB 3.0 DRD Controller of Exynos5250?
Thanks.
It corrects sysreg register, usb host, usb otg base address,
adds power
Hi Joonyoung Shim,
Yes, Vivek Gautam is working on the same.
He might let you know the progress of the same.
Regards,
Rajeshwari Shinde.
On Tue, Jul 3, 2012 at 3:24 PM, Joonyoung Shim dofm...@gmail.com wrote:
Hi, Rajeshwari,
2012/5/8 Rajeshwari Shinde rajeshwar...@samsung.com:
This
Hi,
I have got the u-boot up and running on my Xilinx ML507 development
board, but for some reason, it is missing the fatload command. If someone could
tell me which config option controls the inclusion of the fatload command into
the u-boot image, it would be great.
Without the fatload
-Original Message-
From: Heiko Schocher [mailto:h...@denx.de]
Sent: 03 July 2012 14:41
To: Prafulla Wadaskar
Cc: U-Boot user list; Brunck, Holger
Subject: arm, kirkwood: KWGBE_PORT_SERIAL_CONTROL1_REG define correct?
Hello Prafulla,
I see in current mainline code:
Hi Prafulla,
On 07/03/2012 10:05 AM, Prafulla Wadaskar wrote:
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 13 June 2012 19:03
To: u-boot@lists.denx.de
Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar
Subject: [PATCH v2 03/14] arm/km:
Hello Luke,
On 25.06.2012 18:37, Luke Lowrey wrote:
Modified the arch-kirkwood header so KWGBE_PORT_SERIAL_CONTROL1_REG(x)
returns the correct address.
Originally calling KWGBE_PORT_SERIAL_CONTROL1_REG(1) returned the
address for port 0 and vice versa.
Doesn't have any knock on effects to the
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 03 July 2012 16:08
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Valentin Longchamp
Subject: Re: [PATCH v2 03/14] arm/km: convert mgcoge3un target to
km_kirkwood
Hi Prafulla,
On 07/03/2012
NFS_TIMEOUT is constant value defined in net/nfs.c. But sometimes it needs to
adjust.
This patch enables to override NFS_TIMEOUT by defining CONFIG_NFS_TIMEOUT in a
board specific config file.
Signed-off-by: Tetsuyuki Kobayashi k...@kmckk.co.jp
---
Hello,
I made a patch from Joe's idea.
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 27 June 2012 17:33
To: u-boot@lists.denx.de
Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
Subject: [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Prafulla
-Original Message-
From: Prafulla Wadaskar
Sent: 03 July 2012 17:14
To: 'Marek Vasut'; u-boot@lists.denx.de
Cc: Wolfgang Denk
Subject: RE: [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 27
Dear Albert
Please kindly pull
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
Rajeshwari Shinde (1):
EXYNOS: SMDK5250: Enable the pinmux setup
are available in the git repository at:
u-boot-marvell.git ..BRANCH.NOT.VERIFIED..
Holger Brunck (7):
-Original Message-
From: Prafulla Wadaskar
Sent: 03 July 2012 17:29
To: 'Albert ARIBAUD'
Cc: 'u-boot@lists.denx.de'; Ashish Karkare; Prabhanjan Sarnaik;
'Wolfgang Denk'
Subject: Pull request for u-boot-marvell.git
Dear Albert
Please kindly pull
The following changes since
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 27 June 2012 17:33
To: u-boot@lists.denx.de
Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
Subject: [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Prafulla
Dear Prafulla Wadaskar,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 27 June 2012 17:33
To: u-boot@lists.denx.de
Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
Subject: [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Prafulla Wadaskar prafu...@marvell.com
Cc: Wolfgang Denk w...@denx.de
---
board/karo/tk71/Makefile | 45 +++
board/karo/tk71/kwbimage.cfg | 174 ++
board/karo/tk71/tk71.c | 174
On 07/03/2012 01:19 PM, Prafulla Wadaskar wrote:
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 03 July 2012 16:08
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Valentin Longchamp
Subject: Re: [PATCH v2 03/14] arm/km: convert mgcoge3un target to
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 03 July 2012 18:02
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Valentin Longchamp;
albert.u.b...@aribaud.net
Subject: Re: [PATCH v2 03/14] arm/km: convert mgcoge3un target to
km_kirkwood
On
On 2 July 2012 20:36, Rajeshwari Shinde rajeshwar...@samsung.com wrote:
This patch set adds support for Exynos5250 Rev 1.0.
Exynos5250 Rev 1.0 supports DDR3 Memory configuration and
support for LPDDR2 is removed.
Exynos5250 Rev 1.0 supports DWMMC controller and does not support SDHCI
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 03 July 2012 17:58
To: u-boot@lists.denx.de
Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
Subject: [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Prafulla
Dear Prafulla Wadaskar,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 03 July 2012 17:58
To: u-boot@lists.denx.de
Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
Subject: [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut
On Tue, Jul 3, 2012 at 6:38 AM, Lukasz Majewski l.majew...@samsung.com wrote:
Those patches add support for composite USB download gadget.
This gadget (at least for now) is equipped with DFU download function.
Awesome! :-)
--
Otavio Salvador O.S. Systems
E-mail:
Dear Otavio Salvador,
On Tue, Jul 3, 2012 at 6:38 AM, Lukasz Majewski l.majew...@samsung.com
wrote:
Those patches add support for composite USB download gadget.
This gadget (at least for now) is equipped with DFU download function.
Awesome! :-)
Hey Otavio ... we can do the same with our
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 03 July 2012 18:21
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Wolfgang Denk
Subject: Re: [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Dear Prafulla Wadaskar,
-Original Message-
From:
On 07/03/2012 02:38 PM, Prafulla Wadaskar wrote:
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 03 July 2012 18:02
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Valentin Longchamp;
albert.u.b...@aribaud.net
Subject: Re: [PATCH v2 03/14] arm/km:
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Prafulla Wadaskar prafu...@marvell.com
Cc: Wolfgang Denk w...@denx.de
---
board/karo/tk71/Makefile | 45 +++
board/karo/tk71/kwbimage.cfg | 174 ++
board/karo/tk71/tk71.c | 166
Dear Prafulla Wadaskar,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 03 July 2012 18:21
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Wolfgang Denk
Subject: Re: [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Dear Prafulla Wadaskar,
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 03 July 2012 18:31
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Valentin Longchamp;
albert.u.b...@aribaud.net
Subject: Re: [PATCH v2 03/14] arm/km: convert mgcoge3un target to
km_kirkwood
On
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: 03 July 2012 18:32
To: u-boot@lists.denx.de
Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
Subject: [PATCH 2/2 V4] Kirkwood: Add support for Ka-Ro TK71
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Prafulla
On 07/03/2012 03:07 PM, Prafulla Wadaskar wrote:
This patch makes sense to me since it since it shrinks overall
code.
Doe not have dependency in patch series, can be accepted if
outside
the series.
again, but there are a lot of dependencies between 01-02 and 03-
04
because all
doing a
On Jul 3, 2012, at 6:22 AM, Tetsuyuki Kobayashi k...@kmckk.co.jp wrote:
NFS_TIMEOUT is constant value defined in net/nfs.c. But sometimes it needs to
adjust.
This patch enables to override NFS_TIMEOUT by defining CONFIG_NFS_TIMEOUT in
a board specific config file.
Signed-off-by:
On Mon, Jul 02, 2012 at 10:51:58PM -0700, Allen Martin wrote:
This patch series fixes a long standing problem with the tegra20
u-boot build. Tegra20 contains an ARM7TDMI boot processor and a
Cortex A9 main processor. Prior to this patch series this was
accomplished by #ifdefing out any armv7
Hi Prafulla,
[...]
But 01-08 are not only bugfixes there are also two new boards in these
patches.
So will you pull these eight patches in if I post them again without
09-14?
Pls post bug fixes and improvement patches first those will be pulled
faster.
May I please ask you to reconsider
Doing some tests with the new fsl_elbc code that enables the use of ONFI
chip detection, I verified that one of the NAND chip's we use report a
LUN count 1.
The size detection code doesn't take this into account, making these
chips to have the wrong size detected.
This patch corrected the
With the implementation of the fsl_elbc_nand driver that supports
reading the ONFI parameter page, at least one of the NAND chip's started
to have the size being wrongly reported.
This is due to the fact that this chip reports having more than one LUN,
and this was not being taken into account in
Hello Joe, thanks to responding.
On 2012/07/03, at 22:47, Joe Hershberger wrote:
On Jul 3, 2012, at 6:22 AM, Tetsuyuki Kobayashi k...@kmckk.co.jp wrote:
NFS_TIMEOUT is constant value defined in net/nfs.c. But sometimes it needs
to adjust.
This patch enables to override NFS_TIMEOUT by
-Original Message-
From: Holger Brunck [mailto:holger.bru...@keymile.com]
Sent: 03 July 2012 19:13
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; Valentin Longchamp;
albert.u.b...@aribaud.net; Detlev Zundel
Subject: Re: [PATCH v2 03/14] arm/km: convert mgcoge3un target to
Hi,
On 29.06.2012 13:26, Wolfgang Denk wrote:
Dear Matthias Fuchs,
In message 4fed7877.2020...@esd.eu you wrote:
I just noticed that using getenv (and friends)
does not work on ARM (namely i.MX28) from board_init_f()
after running through the init_sequence.
This is normal, and
Hi Joonyoung Shim,
We are currently working on this.
We also needed stack support for xhci in U-boot. So both tasks are going on
simultaneously, the stack as well as USB 3.0 DRD controller for exynos5250.
Will soon come with the required support patchesets.
Thanks
Vivek
On Tue, Jul 3, 2012 at
2012/6/29 Javier Martinez Canillas jav...@dowhile0.org
omap2plus_defconfig now has built-in compile support for EXT4 enabled
by default now. So, we can use EXT4 as the default root file system
type for MMC.
Signed-off-by: Javier Martinez Canillas jav...@dowhile0.org
---
2012/6/29 Javier Martinez Canillas jav...@dowhile0.org
An OMAP specific serial driver was merged on the Linux kenel a long
time ago. So, it makes sense to default the console name to OMAP
ttyO instead of the generic ttyS naming.
Signed-off-by: Javier Martinez Canillas jav...@dowhile0.org
On 07/02/2012 11:52 PM, Allen Martin wrote:
Change the mkdir commands for the object directories to be
unconditional. This fixes an issue when building for SPL where
SRCTREE and OBJTREE are the same, but $(obj) is under SPLTREE.
Signed-off-by: Allen Martin amar...@nvidia.com
All the
On Sat, 30 Jun 2012 18:29:20 -0500
Kim Phillips kim.phill...@freescale.com wrote:
extention of commit 3b6b256 powerpc/mpc83xx: increment
malloc heap size for the MPC832x MDS boards to all other
mpc83xx based boards. It fixes Unable to save the rest
of sector messages when trying to save the
Wolfgang Denk,
Please pull a couple of minor fixes for 83xx:
The following changes since commit 558cd995d6d3eaa94fb342d142289a1fa2f76ba3:
tools/mkenvimage.c: fix basename(3) usage (2012-07-02 20:21:49 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.git
ext2fs.c: In function 'ext2fs_read_file':
ext2fs.c:458:19: warning: 'blocknxt' may be used uninitialized in this function
[-Wuninitialized]
Cc: Jason Cooper u-b...@lakedaemon.net
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
is this right?
fs/ext2/ext2fs.c | 2 +-
1 file changed,
On Mon, 18 Jun 2012 19:11:34 -0500
Timur Tabi ti...@freescale.com wrote:
The misspelling of semiconductor causes some internal copyright analysis
tools to complain.
Signed-off-by: Timur Tabi ti...@freescale.com
---
applied, thanks.
Kim
___
On Tue, Jul 03, 2012 at 06:55:48AM -0700, Thierry Reding wrote:
...
Successfully booted to login prompt on TEC.
Tested-by: Thierry Reding thierry.red...@avionic-design.de
That's great news, it sounds like it was the USE_PRIVATE_LIBGCC
problem. Thank you very much for finding that and
From 9da2bc23d24f9275390c193d62e2e95d3d7505ce Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Tue, 3 Jul 2012 21:41:04 +0530
Subject: [PATCH] imx: Remove unused Macro CONFIG_DISCOVER_PHY
Remove the macro as this is not used anywhere
Signed-off-by: Ashok Kumar
On Tue, Jul 3, 2012 at 1:52 PM, Ashok ashokkourla2...@gmail.com wrote:
From 9da2bc23d24f9275390c193d62e2e95d3d7505ce Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Tue, 3 Jul 2012 21:41:04 +0530
Subject: [PATCH] imx: Remove unused Macro CONFIG_DISCOVER_PHY
According to the IGEPv2 Rev.C data-sheet the LAN9221i pin 14 (IRQ) is
connected to the OMAP3730 mcspi1_cs2 pin. Since this omap mux pin acts
as an IRQ line, it has to be configured as an input GPIO.
IGEPv2 platform code sets the smsc911x_cfg-gpio_irq to GPIO 176 but
since the mux pin default mode
Dear Prafulla,
In message f766e4f80769bd478052fb6533fa745d1a2fe30...@sc-vexch4.marvell.com
you wrote:
Do you think I should pull this patch series, I hope it applies cleanly on
the recent master branch.
Please confirm.
I have to admit that I neither reviewed the patches in question, nor
Dear Matthias Fuchs,
In message 4ff306fc.9040...@esd.eu you wrote:
This is normal, and documented. Before relocation, you must not use
getenv().
Yes, I am aware of this. I even think that the getenv() implementation
falls back to getenv_f() before relocation.
This is not guaranteed to
Dear Stefan Herbrechtsmeier,
The commit 5dd95cf93dfffa1d19a1928990852aac9f55b9d9 'usb_storage:
Fix EHCI out of buffer pointers with CD-ROM' introduce a bug in
usb_storage as it wrongly assumes that every transfer can use 4k
per qt_buffer. This is wrong if the start address of the data
is not
hi Christian,
On Tue, Jul 3, 2012 at 11:52 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Hi Sughosh,
On Mon, Jul 2, 2012 at 9:24 PM, Sughosh Ganu urwithsugh...@gmail.com
wrote:
hi,
While testing on hawkboard with the latest commit, i hit an issue of
commands not being
Hi,
On Fri, Jun 29, 2012 at 1:22 PM, Stephan Linz l...@li-pro.net wrote:
Am Freitag, den 29.06.2012, 10:18 +0200 schrieb Michal Simek:
On 06/29/2012 04:32 AM, Simon Glass wrote:
Hi,
--snip--
I have sent support for Microblaze. Currently without dts because I want
to clear this
Hi,
On Tue, Jul 3, 2012 at 2:21 AM, Michal Simek mon...@monstr.eu wrote:
On 06/29/2012 04:32 AM, Simon Glass wrote:
Hi,
On Wed, Jun 27, 2012 at 11:49 PM, Michal Simek mon...@monstr.eu mailto:
mon...@monstr.eu wrote:
On 06/28/2012 07:57 AM, Simon Glass wrote:
Hi Michal,
Hi,
On Sun, Jul 1, 2012 at 10:43 PM, Michal Simek mon...@monstr.eu wrote:
2012/6/29 Stephan Linz l...@li-pro.net:
Am Freitag, den 29.06.2012, 10:18 +0200 schrieb Michal Simek:
On 06/29/2012 04:32 AM, Simon Glass wrote:
Hi,
--snip--
I have sent support for Microblaze. Currently
Hi,
Am Montag, den 02.07.2012, 07:43 +0200 schrieb Michal Simek:
2012/6/29 Stephan Linz l...@li-pro.net:
Am Freitag, den 29.06.2012, 10:18 +0200 schrieb Michal Simek:
On 06/29/2012 04:32 AM, Simon Glass wrote:
Hi,
--snip--
I have sent support for Microblaze. Currently without
Hi Michal,
On Thu, Jun 28, 2012 at 12:26 AM, Michal Simek mon...@monstr.eu wrote:
Support new CONFIG_OF_CONTROL option where device
probing is done based on device tree description.
Signed-off-by: Michal Simek mon...@monstr.eu
---
drivers/net/xilinx_emaclite.c | 30
Dear Marek,
30.06.2012 23:27, Marek Vasut wrote:
do {
/* Invalidate dcache */
invalidate_dcache_range((uint32_t)qh_list,
(uint32_t)qh_list + sizeof(struct QH));
invalidate_dcache_range((uint32_t)qh,
Dear Marek,
30.06.2012 23:28, Marek Vasut wrote:
Not exactly. It never worked (at least on my systems) with D-Cache
enabled. But at least we had a choice of run-time disabled dcache. With
the recent changes we have to disable cache support at compile time.
I see what you're after. But do you
Am Dienstag, den 03.07.2012, 12:21 -0700 schrieb Simon Glass:
Hi,
On Sun, Jul 1, 2012 at 10:43 PM, Michal Simek mon...@monstr.eu wrote:
2012/6/29 Stephan Linz l...@li-pro.net:
Am Freitag, den 29.06.2012, 10:18 +0200 schrieb Michal Simek:
On 06/29/2012 04:32 AM, Simon Glass wrote:
On 07/03/2012 01:13 PM, Ilya Yanok wrote:
Dear Marek,
30.06.2012 23:28, Marek Vasut wrote:
Not exactly. It never worked (at least on my systems) with D-Cache
enabled. But at least we had a choice of run-time disabled dcache. With
the recent changes we have to disable cache support at
Freescale FCM controller has a 2K size limitation of buffer RAM. In order
to support the Nand flash chip with pagesize larger than 2K bytes,
we read/write 2k data repeatedly by issuing FIR_OP_RB/FIR_OP_WB and save
them to a large buffer.
Because of this, the in flash layout of the oob is different
Hi Tom,
04.07.2012 00:43, Tom Rini wrote:
On 07/03/2012 01:13 PM, Ilya Yanok wrote:
Dear Marek,
30.06.2012 23:28, Marek Vasut wrote:
Not exactly. It never worked (at least on my systems) with D-Cache
enabled. But at least we had a choice of run-time disabled dcache. With
the recent changes
This is my implementation of the factory badblock migration process for
the fsl_elbc driver using the hack to support nand devices with page
sizes bigger than 2048k.
As per last discussion with Scott Wood, I now write the marker in all
the pages of the block, to add redundancy.
The code that
Dear Tom Rini,
On 07/03/2012 01:13 PM, Ilya Yanok wrote:
Dear Marek,
30.06.2012 23:28, Marek Vasut wrote:
Not exactly. It never worked (at least on my systems) with D-Cache
enabled. But at least we had a choice of run-time disabled dcache. With
the recent changes we have to disable
Dear Ilya Yanok,
Dear Marek,
30.06.2012 23:27, Marek Vasut wrote:
do {
/* Invalidate dcache */
invalidate_dcache_range((uint32_t)qh_list,
(uint32_t)qh_list + sizeof(struct QH));
Dear Lukasz Majewski,
New, separate driver at ./drivers/dfu has been added. It allows platform
and storage independent operation of DFU.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
[...]
Dear Lukasz Majewski,
Support for f_dfu USB function.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
[...]
+
+static const char dfu_name[] = Device Firmware Upgrade;
+
+/* static strings, in
Dear Lukasz Majewski,
Support for MMC storage devices to work with DFU framework.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
[...]
+
+#include common.h
+#include malloc.h
+#include
1 - 100 of 147 matches
Mail list logo
