Hi, Tom.
I am grateful that you have been working during the vacation.
And thanks for release 2014.04.
Best regards,
Nobuhiro
2014-04-15 4:20 GMT+09:00 Tom Rini tr...@ti.com:
On Mon, Apr 14, 2014 at 05:53:19PM +0900, Nobuhiro Iwamatsu wrote:
Dear Albert Aribaud,
Please pull
T1040 and it's variants provide Single Oscillator Source Reference Clock Mode.
In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference
clock
(100MHz) to the following PLLs:
• Platform PLL
• Core PLLs
• USB PLL
• DDR PLL, etc
The cfg_eng_use0 of porsr1 register identifies
Hi Simon,
Hi Lukasz,
On 14 April 2014 01:17, Lukasz Majewski l.majew...@samsung.com
wrote:
[snip[
I think your questions are mostly answered but I wanted to chime in
on a few.
What is wrong with specifying the bank field?
Why your gpio command cannot use the bank approach?
Hi Tom,
And I would encourge custodians to follow-up with anything big I've
overlooked.
Thanks for the hard work everyone! The merge window is now open until
Saturday May 03 2014.
A few minor patches were omitted, though :-).
http://patchwork.ozlabs.org/patch/337795/
Adds support for clock sourcing from sysclk(100MHz) for usb
on T104xRDB and T1040QDS. This requires changing reference divisor
and multiplication factor to derive usb clock from sysclk.
Signed-off-by: Nikhil Badola nikhil.bad...@freescale.com
---
Dependency on patch
Adds support for clock sourcing from sysclk(100MHz) for usb
on T104xRDB and T1040QDS. This requires changing reference divisor
and multiplication factor to derive usb clock from sysclk.
Signed-off-by: Nikhil Badola nikhil.bad...@freescale.com
---
Dependency on patch
On 04/11/14 14:02, Marek Vasut wrote:
Existing code relied on boolean value returned from
usb_cable_connected(), but there was no way to signal that it's
impossible to tell whether cable is connected or not. If you prefer an
enum with USBCNT_DONTKNOW as a return value, make a decision.
Did
Dear Tom,
In message 20140414192025.GM23803@bill-the-cat you wrote:
I've pushed v2014.04 out to the repository and tarballs should exist
soon.
The tarball is out, and also the release statistics (see [1], or short
summary below).
Tom - can you please also update the web page with the
Hi,
we're running 2014.04-rc3 on custom am335x board (same configuration as BBB).
When spl is loading u-boot from nand flash we can see a lot of
messages in console:
nand: bit-flip corrected @oob=0
It is always the same position (seems to be first byte in oob).
Anybody experienced same problem?
Hi Rob,
From: Rob Herring r...@kernel.org
Various commands that load images have no checks that a loaded image
does not exceed the available RAM space and will happily continue
overwriting u-boot or other RAM that should not be touched. Also,
some commands such as USB DFU or fastboot need
Hi Rob,
From: Rob Herring r...@kernel.org
Allow a NULL table to be passed to usb_gadget_get_string for cases
when a string table may not be populated.
I might be wrong, since I'm not the native speaker, but this
description is a bit misleading.
For me this patch is supposed to prevent from
Structure definition used type block_dev_desc_t, defined in part.h, which
wasn't included in mmc.h. It worked only in circumstances when common.h,
or another header using part.h was incuded in implementation files.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Minkyu Kang
Former usb_cable_connected() patch broke compilation of boards which do
not support this feature.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Minkyu Kang mk7.k...@samsung.com
---
common/cmd_usb_mass_storage.c | 2
When user attempted to perform a raw write using DFU (vide
dfu_fill_entity_mmc) with MMC interface not initialized before,
get_mmc_blk_size() reported invalid (zero) block size - it wasn't
possible to write ie. a new u-boot image.
This commit fixes that by initializing device in
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Tom Rini tr...@ti.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/linker_lists.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linker_lists.h b/include/linker_lists.h
index
Proper adjustment for supporting DFU at GONI target has been made.
The s5p_goni.h file has been updated. Moreover the code for low level
USB initialization has been added to GONI board code.
The malloc pool has been enlarged in order to support larger buffer
sizes needed by DFU implementation.
Preprocessor definitions and hardcoded implementation selection in
g_dnl core were replaced by a linker list made of (usb_function_name,
bind_callback) pairs.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Minkyu
mmc_init() doesn't call get_timer() anymore if MMC is already
initialized.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
drivers/mmc/mmc.c | 7 +--
1 file changed, 5 insertions(+), 2
This is, I hope, the final version of patchset.
Custodians: please ack appropriate patches.
Minkyu Kang: Could you pick it up after it gets reviewed by the community?
patches 1-7: fixes that can be applied before features
patches 8-13: features and fixes that depend on features
Patchset has
Implementation made use of types defined in common.h, even though it
wasn't #included. It worked in circumstances when .c files included
every needed header (all).
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Tom Rini tr...@ti.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/part.h
Configuration file for GONI has been updated to support FAT file system,
new mmc partitioning scheme and read linux kernel from eMMC instead of
OneNAND.
Signed-off-by: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Mateusz
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/configs/s5p_goni.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index f97b52d..c52a00a 100644
--- a/include/configs/s5p_goni.h
In some cases MMC was still uninitialized while media capacity check,
leading to broken ums command.
Tested on Samsung Goni.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Tested-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang
Future patches will make DFU too large to fit in this board's SPL build.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Tom Rini tr...@ti.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/configs/am335x_evm.h | 2 ++
1 file changed, 2
UMS-related defines were added to Samsung Goni config header.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/configs/s5p_goni.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index
Hi Rob,
From: Sebastian Siewior bige...@linutronix.de
This patch adds support for the Android boot-image format. The header
file is from the Android project and got slightly alterted so the
struct + its defines are not generic but have something like a
namespace. The header file is from
arch/arm/cpu/arm1136/start.S contain a cache flushing function.
Remove the function and move its code into arch/arm/lib/cache.c.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm1136/start.S | 10 --
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm1136/start.S | 2 --
arch/arm/cpu/arm1176/start.S | 2 --
arch/arm/cpu/arm946es/start.S | 2 --
arch/arm/cpu/armv7/start.S| 3 ---
arch/arm/cpu/pxa/start.S | 2 --
5
PXA start.S has a PXA (variant) specific check in
start.S. Move it to cpuinfo.c.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/pxa/cpuinfo.c | 6 ++
arch/arm/cpu/pxa/start.S | 6 --
2 files changed, 6 insertions(+), 6
This series aims at refactoring start.S files. Some of these
files contain cache-related or cpu-reset-related core, which
is moved where it belongs. Useless symbols are removed, and
finally, exception vector code, common across all ARM CPUs,
is moved in its own file.
At this point, the start.S
CPUs arm946es and sa1100 both define the reset_cpu()
function in their start.S file. Move this cpu-specific code
into cpu.c so that start.S only contains ARM generic code.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3: None
Changes in v2:
- fixed checkpatch issues in
Hi Mateusz,
In some cases MMC was still uninitialized while media capacity check,
leading to broken ums command.
Tested on Samsung Goni.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Tested-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc:
Hi Mateusz,
Former usb_cable_connected() patch broke compilation of boards which
do not support this feature.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Minkyu Kang mk7.k...@samsung.com
---
Hi Mateusz,
Future patches will make DFU too large to fit in this board's SPL
build.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Tom Rini tr...@ti.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
include/configs/am335x_evm.h | 2 ++
1
Hi Mateusz,
Preprocessor definitions and hardcoded implementation selection in
g_dnl core were replaced by a linker list made of (usb_function_name,
bind_callback) pairs.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Marek Vasut
On Tuesday, April 15, 2014 at 01:04:57 PM, Mateusz Zalega wrote:
On 04/11/14 14:02, Marek Vasut wrote:
Existing code relied on boolean value returned from
usb_cable_connected(), but there was no way to signal that it's
impossible to tell whether cable is connected or not. If you prefer an
On Tuesday, April 15, 2014 at 03:06:52 PM, Mateusz Zalega wrote:
Former usb_cable_connected() patch broke compilation of boards which do
not support this feature.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc:
On Tuesday, April 15, 2014 at 03:06:57 PM, Mateusz Zalega wrote:
Preprocessor definitions and hardcoded implementation selection in
g_dnl core were replaced by a linker list made of (usb_function_name,
bind_callback) pairs.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Lukasz
Dang,
On 04/14/2014 03:11 PM, Tran, Dang wrote:
Jim,
I'm using TeraTerm version 2.3.
I've also occasionally used TeraTerm successfully. Usually, I use the
Linux cu.
I can send Ctrl-C the board. However when I'm in this looping mode I can't.
I have no other ideas for you to try, I'm
On Tuesday, April 15, 2014 at 04:13:49 PM, Albert ARIBAUD wrote:
PXA start.S has a PXA (variant) specific check in
start.S. Move it to cpuinfo.c.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3: None
Changes in v2: None
Acked-by: Marek Vasut ma...@denx.de
Best
On Tuesday, April 15, 2014 at 03:06:51 PM, Mateusz Zalega wrote:
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Tom Rini tr...@ti.com
Cc: Minkyu Kang mk7.k...@samsung.com
You are missing a commit message here. Please fix that and add:
Acked-by: Marek
On Tue, Apr 15, 2014 at 10:41 AM, Lukasz Majewski
l.majew...@samsung.com wrote:
Hi Rob,
From: Sebastian Siewior bige...@linutronix.de
This patch contains an implementation of the fastboot protocol on the
device side and a little of documentation.
The gadget expects the new-style gadget
Hi Rob,
From: Sebastian Siewior bige...@linutronix.de
This patch contains an implementation of the fastboot protocol on the
device side and a little of documentation.
The gadget expects the new-style gadget framework.
The gadget implements the getvar, reboot, download and reboot
commands.
Built for all Exynos SoCs but couldn't test booting over all of them.
Tested U-Boot bootup over SMDK5420, SMDK5250, Snow.
Requesting maintaners to test once over affected SoCs.
Changes in V2:
- Enabled CMD_GPIO as suggested by Simon Glass
and supported same for EXYNOS5.
Changes
Enabling configs for GPIO CMD and Generic GPIO.
Also, doing modifications in the config definitions
wherever required due to change in gpio macros
pin numbering enums.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
On Mon, Apr 14, 2014 at 10:48 PM, Matthias Weißer weiss...@arcor.de wrote:
Am 14.04.2014 17:38, schrieb Kees Cook:
On Mon, Apr 14, 2014 at 1:51 AM, Matthias Weißer weiss...@arcor.de
wrote:
Am 14.04.2014 08:09, schrieb Matthias Weißer:
Hi Wolfgang
Am 11.04.2014 12:43, schrieb Wolfgang
The LZO decompressor wasn't initializing the maximum output size, which
meant it would fail to decompress most of the time.
Reported-by: Matthias Weißer weiss...@arcor.de
Signed-off-by: Kees Cook keesc...@chromium.org
Tested-by: Matthias Weißer weiss...@arcor.de
---
common/cmd_bootm.c |2 +-
On Tue, Apr 15, 2014 at 10:27 AM, Kees Cook keesc...@chromium.org wrote:
On Mon, Apr 14, 2014 at 10:48 PM, Matthias Weißer weiss...@arcor.de wrote:
Am 14.04.2014 17:38, schrieb Kees Cook:
On Mon, Apr 14, 2014 at 1:51 AM, Matthias Weißer weiss...@arcor.de
wrote:
Am 14.04.2014 08:09, schrieb
On 15 April 2014 11:28, Kees Cook keesc...@chromium.org wrote:
The LZO decompressor wasn't initializing the maximum output size, which
meant it would fail to decompress most of the time.
Reported-by: Matthias Weißer weiss...@arcor.de
Signed-off-by: Kees Cook keesc...@chromium.org
Tested-by:
We should use generic board in order the ARM maintainer
be able to remove arch/arm/lib/board.c
Signed-off-by: Ivan Khoronzhuk ivan.khoronz...@ti.com
---
include/configs/k2hk_evm.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index
On 04/15/2014 09:32 PM, Ivan Khoronzhuk wrote:
We should use generic board in order the ARM maintainer
be able to remove arch/arm/lib/board.c
Signed-off-by: Ivan Khoronzhuk ivan.khoronz...@ti.com
---
Based on [U-Boot] [PATCH v6 0/9] Add support for keystone2 SoC and K2HK
EVM
Hi,
is there a possibility to interrupt autoboot when a GPIO pin has a
certain value? I know there is CONFIG_AUTOBOOT_DELAY_STR and that should
suffice in most cases when there is another peripheral connected to the
UART, but think about the following setup I have:
A processor (in my case a
Dear Rob,
In message 1397157488-8695-2-git-send-email-robherri...@gmail.com you wrote:
Various commands that load images have no checks that a loaded image
does not exceed the available RAM space and will happily continue
overwriting u-boot or other RAM that should not be touched. Also,
Dear Akshay Saraswat,
In message 1397582186-7186-3-git-send-email-aksha...@samsung.com you wrote:
Enabling configs for GPIO CMD and Generic GPIO.
Also, doing modifications in the config definitions
wherever required due to change in gpio macros
pin numbering enums.
Signed-off-by:
Dear Florian,
In message 534d798a.9050...@koalo.de you wrote:
is there a possibility to interrupt autoboot when a GPIO pin has a
certain value? I know there is CONFIG_AUTOBOOT_DELAY_STR and that should
suffice in most cases when there is another peripheral connected to the
UART, but think
On Tue, Apr 15, 2014 at 4:59 PM, Wolfgang Denk w...@denx.de wrote:
Dear Rob,
In message 1397157488-8695-2-git-send-email-robherri...@gmail.com you wrote:
Various commands that load images have no checks that a loaded image
does not exceed the available RAM space and will happily continue
Hi, Fenghua:
I have tried to boot U-boot 2014.04 formal release code on FVP model.
But failed.
And u-boot-2014.04-rc3.tar.bz2 is OK.
Best wishes,
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi, Fenghua:
Sorry !
GICv3 caused it failed to boot.
Because I used free license FVP, not support GICv3.
I del #define CONFIG_GICV3 in vexpress_aemv8a.h.
Then it booted ok!
Best wishes,
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi, Mateusz.
ERROR: foo * bar should be foo *bar
#701: FILE: drivers/usb/gadget/g_dnl.c:104:
+static inline struct g_dnl_bind_callback * g_dnl_bind_callback_first(void)
ERROR: foo * bar should be foo *bar
#707: FILE: drivers/usb/gadget/g_dnl.c:110:
+static inline struct g_dnl_bind_callback *
Did ./MAKEALL -a arm and found all Exynos/S5P related boards
compiled successfully.
Couldn't test booting over all of them.
Tested U-Boot bootup over SMDK5420, SMDK5250, Snow.
Requesting maintaners to test once over affected SoCs/boards.
Changes in V2:
- Enabled CMD_GPIO as suggested by
Enabling configs for GPIO CMD and Generic GPIO in case
of S5P and Exynos target boards.
Also, doing modifications in the config definitions
wherever required due to change in gpio macros
pin numbering enums.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Signed-off-by: Akshay Saraswat
61 matches
Mail list logo
