From: Marcel Ziswiler marcel.ziswi...@toradex.com
This patch fixes operation of our on-board AX88772B chip without EEPROM
but with a ethaddr coming from the regular U-Boot environment. This is
a forward port of some remaining parts initially implemented by
Antmicro.
Signed-off-by: Marcel
From: Marcel Ziswiler marcel.ziswi...@toradex.com
Remove spurious new line in configuration file.
Signed-off-by: Marcel Ziswiler marcel.ziswi...@toradex.com
Tested-by: Marek Vasut ma...@denx.de
Acked-by: Marek Vasut ma...@denx.de
---
Changes in v2: none
include/configs/colibri_vf.h | 1 -
1
From: Marcel Ziswiler marcel.ziswi...@toradex.com
Allow showing custom board info from a checkboard() function being
implemented if CONFIG_CUSTOM_BOARDINFO is specified. Previously the
device tree model was always displayed not taking any
CONFIG_CUSTOM_BOARDINFO into account.
Signed-off-by:
From: Marcel Ziswiler marcel.ziswi...@toradex.com
Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:
ERROR: v7_dcache_inval_range - start address is not aligned - 0x1f7f0108
ERROR: v7_dcache_inval_range -
From: Max Krummenacher max.krummenac...@toradex.com
This fixes the following warning (and the runtime error reporting):
../common/image-fdt.c:491:4: warning: 'fdt_ret' may be used
uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Max Krummenacher max.krummenac...@toradex.com
From: Max Krummenacher max.krummenac...@toradex.com
CONFIG_TFTP_TSIZE should limit a tftp downloads progress to 50 '#'
chars. Make this work also for small files.
If the file size is small, i.e. smaller than 2 tftp block sizes the
number of '#' can get much larger. i.e. with a 1 byte file 65000
From: Max Krummenacher max.krummenac...@toradex.com
http://lists.denx.de/pipermail/u-boot/2012-September/134347.html
allows for reading files in chunks from the shell.
When this feature is used to read past the end of a file an error
was returned instead of returning the bytes read up to the end
From: Marcel Ziswiler marcel.ziswi...@toradex.com
This patch set is an assortment of fixes/enhancements distilled
straight from our downstream integration work.
Marcel Ziswiler (4):
net: asix: fix operation without eeprom
generic-board: allow showing custom board info
colibri_vf: remove
From: Stefan Agner stefan.ag...@toradex.com
Use the boot loader splash screen from WinCE which matches our
wallpapers position wise. Although the logo is an 8-bit indexed BMP as
well colours looked odd at first in U-Boot. After converting to full
RGB palette and converting back to an indexed BMP
Hi Bin,
On 07/08 11:18, Bin Meng wrote:
Hi Andrew,
On Wed, Jul 8, 2015 at 3:16 AM, and...@bradfordembedded.com wrote:
From: Andrew Bradford andrew.bradf...@kodakalaris.com
Allow for configuration of FSP UPD from the device tree which will
override any settings which the FSP was built
Hi Simon,
On 07-07-15 09:00, Hans de Goede wrote:
Hi,
On 06-07-15 18:39, Simon Glass wrote:
Hi Hans,
On 5 July 2015 at 12:56, Hans de Goede hdego...@redhat.com wrote:
Some boards simply do not have any serial ports. Also no one will see the
panic message as there is no where to print it if
Hi Minghuan,
On Tue, Jul 7, 2015 at 7:55 PM, Minghuan Lian
minghuan.l...@freescale.com wrote:
PCIe extends device's configuration space to 4k and provides
extended capability. The patch adds function to find them.
The code is ported from Linux PCIe driver.
Signed-off-by: Minghuan Lian
Hello Sharma,
On Wed, 8 Jul 2015 07:31:47 +, Sharma Bhupesh
bhupesh.sha...@freescale.com wrote:
-Original Message-
From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wang
Haikun
On 7/8/2015 3:13 PM, Bin Meng wrote:
Hi,
On Wed, Jul 8, 2015 at 2:51 PM, Wang
On Wed, Jul 8, 2015 at 5:05 PM, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
I've rebased my git repo on u-boot-x86/master branch and found one
warning popped up:
$ make crownbay_defconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED
-Original Message-
From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wang
Haikun
On 7/8/2015 3:13 PM, Bin Meng wrote:
Hi,
On Wed, Jul 8, 2015 at 2:51 PM, Wang Haikun haikun.w...@freescale.com
wrote:
On 6/26/2015 7:53 PM, Haikun Wang wrote:
From: Haikun Wang
Hi Bin,
Thanks for your comments.
Please see my reply inline.
-Original Message-
From: Bin Meng [mailto:bmeng...@gmail.com]
Sent: Wednesday, July 08, 2015 4:14 PM
To: Lian Minghuan-B31939
Cc: U-Boot Mailing List; Hu Mingkai-B21284; Sun York-R58495
Subject: Re: [U-Boot] [PATCH 1/2]
Hi Albert
-Original Message-
From: Albert ARIBAUD [mailto:albert.u.b...@aribaud.net]
Sent: Wednesday, July 08, 2015 2:50 PM
To: Sharma Bhupesh-B45370
Cc: Wang Haikun-B53464; Bin Meng; Russell King; Mark Rutland; Sun York-
R58495; Kushwaha Prabhakar-B32579; u-boot@lists.denx.de
Hi Simon,
I've rebased my git repo on u-boot-x86/master branch and found one
warning popped up:
$ make crownbay_defconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED
On Wednesday, July 08, 2015 at 01:58:47 PM, Marcel Ziswiler wrote:
From: Marcel Ziswiler marcel.ziswi...@toradex.com
This patch fixes operation of our on-board AX88772B chip without EEPROM
but with a ethaddr coming from the regular U-Boot environment. This is
a forward port of some remaining
On 8 July 2015 at 05:58, Marcel Ziswiler mar...@ziswiler.com wrote:
From: Marcel Ziswiler marcel.ziswi...@toradex.com
Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:
ERROR: v7_dcache_inval_range -
On 8 July 2015 at 05:58, Marcel Ziswiler mar...@ziswiler.com wrote:
From: Marcel Ziswiler marcel.ziswi...@toradex.com
Allow showing custom board info from a checkboard() function being
implemented if CONFIG_CUSTOM_BOARDINFO is specified. Previously the
device tree model was always displayed
Remove duplicated entry of OF_CONTROL in crownbay_defconfig and
minnowmax_defconfig which causes a warning when making defconfig.
The updated defconfig files are generated by 'make savedefconfig'.
Signed-off-by: Bin Meng bmeng...@gmail.com
---
configs/crownbay_defconfig | 14 ++
Hello Sharma,
On Wed, 8 Jul 2015 10:31:45 +, Sharma Bhupesh
bhupesh.sha...@freescale.com wrote:
Hi Albert
-Original Message-
From: Albert ARIBAUD [mailto:albert.u.b...@aribaud.net]
Sent: Wednesday, July 08, 2015 2:50 PM
To: Sharma Bhupesh-B45370
Cc: Wang Haikun-B53464;
On 23 June 2015 at 15:38, Simon Glass s...@chromium.org wrote:
This is checking the wrong method. Fix it.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
drivers/cpu/cpu-uclass.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Hi Peng,
On 30/06/2015 10:02, Peng Fan wrote:
The reason to add different commands but not one CHECK_DATA_COMMAND is that
compatible with current implementation.
Current DCD supports DATA 4 addr value. If want to use one
CHECK_DATA_COMMAND
to cover CHECK_BITS_SET/CLR, we need another
+Masahiro
Hi Hans,
On 8 July 2015 at 05:56, Hans de Goede hdego...@redhat.com wrote:
Hi Simon,
On 07-07-15 09:00, Hans de Goede wrote:
Hi,
On 06-07-15 18:39, Simon Glass wrote:
Hi Hans,
On 5 July 2015 at 12:56, Hans de Goede hdego...@redhat.com wrote:
Some boards simply do not have
Hi Steve,
On 15-07-07 06:27 AM, Lukasz Majewski wrote:
Hi Steve,
Signed-off-by: Steve Rae s...@broadcom.com
---
Changes in v2: None
drivers/usb/gadget/s3c_udc_otg.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c
On Wednesday, July 08, 2015 at 04:22:14 PM, Lukasz Majewski wrote:
Hi Steve,
Hi!
b/drivers/usb/gadget/bcm_udc_otg.h new file mode 100644
index 000..81a1fc0
--- /dev/null
+++ b/drivers/usb/gadget/bcm_udc_otg.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2015 Broadcom Corporation.
Hi Tom,
One of the sunxi dts files for a new board got merged into the
upstream kernel under a different name than that it was originally
submitted with. This pull-req contains a single patch adjusting
the name in u-boot, so that we do not end up shipping a u-boot
which looks for a differently
On Wednesday, July 08, 2015 at 04:54:07 PM, Hans de Goede wrote:
USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do not like this.
Currently we power off the USB ports both on a usb reset and when
booting the kernel, causing the
+ML
Hi Ulrich,
On 7 July 2015 at 08:32, Ulrich Prinz ulrich.pr...@googlemail.com wrote:
Am 24.06.2015 um 01:28 schrieb Simon Glass:
The Rockchip RK3288 is based on a quad-core Cortex-A17 CPU and has a good
set of peripherals. Various full-featured U-Boot ports are available and
this is an
Hi,
On 08-07-15 16:08, Simon Glass wrote:
+Masahiro
Hi Hans,
On 8 July 2015 at 05:56, Hans de Goede hdego...@redhat.com wrote:
Hi Simon,
On 07-07-15 09:00, Hans de Goede wrote:
Hi,
On 06-07-15 18:39, Simon Glass wrote:
Hi Hans,
On 5 July 2015 at 12:56, Hans de Goede
On Wed, 2015-07-08 at 16:54 +0200, Hans de Goede wrote:
USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do not like this.
Currently we power off the USB ports both on a usb reset and when
booting the kernel, causing the usb-power to
USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do not like this.
Currently we power off the USB ports both on a usb reset and when
booting the kernel, causing the usb-power to bounce off and then back
on again.
This patch removes the
Hi Steve,
Hi, Lukasz
On 15-07-07 06:33 AM, Lukasz Majewski wrote:
Hi Steve,
From: JD (Jiandong) Zheng jdzh...@broadcom.com
Add the required files for the Broadcom UDC OTG interface.
Signed-off-by: Steve Rae s...@broadcom.com
---
Changes in v2: None
When core A turning of core B, via tetris DPSC it places the core
B DPSC into transitional state. The core B has to execute wfi instruction
to move its DPSC to the OFF state. This patch add such instruction.
Signed-off-by: Vitaly Andrianov vita...@ti.com
---
arch/arm/mach-keystone/cmd_mon.c | 9
This patch adds the glue code for hi6220 SoC which has 2x synopsis
dw_mmc controllers. This will be used by the hikey board support
in subsequent patches.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
arch/arm/include/asm/arch-hi6220/dwmmc.h | 8 +
drivers/mmc/Makefile
To help others with compiling and flashing ATF and u-boot add
a README for this board.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
board/hisilicon/hikey/README | 160 +++
1 file changed, 160 insertions(+)
create mode 100644
K2L and L2E have different from K2HK EthSS version, which uses tag_info
field for destination slave port. This commit adds the dest_port_info field
to the struct pktdma_cfg, to configure which HD filed tag_info or pkt_info
shall be used to configure descriptor.
Before that commit the swinfo[2]
This patch adds support for the GPIO perif found on hi6220
SoC.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
arch/arm/include/asm/arch-hi6220/gpio.h | 29 ++
drivers/gpio/Makefile | 2 +
drivers/gpio/hi6220_gpio.c | 95
Hi Folks,
This series adds support for the first 96boards consumer edition HiKey board.
More information can be found about this board at the following link
https://www.96boards.org/products/hikey/.
This initial port adds support for: -
1) Serial
2) eMMC and sd card
3) USB
4) GPIO
It has been
Keystone2 SOC physical DDR3 address range is outside the first 4GB and
cannot be entirely accessible without MMU enabled. Only first 2GB of
the physical memory have 32-bits aliased addresses. This patch adds u-boot
shell command that allows to enable/disable MMU and map the 1GB of
36bits physical
The MCAST_TFTP support requires that network drivers has mcast functon
implemented. This commit adds dummy keystone2_eth_bcast_addr() to meet
the requirement. As far as the driver doesn't use ALE and doesn't filter
any incoming packets, the function is empty.
Signed-off-by: Vitaly Andrianov
This pmic is used on the 96boards consumer edition HiKey board.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
arch/arm/include/asm/arch-hi6220/hi6553.h | 75 +++
1 file changed, 75 insertions(+)
create mode 100644 arch/arm/include/asm/arch-hi6220/hi6553.h
HiKey is the first 96boards consumer edition compliant board. It features a
hi6220
SoC which has eight ARM A53 cpu's.
This initial port adds support for: -
1) Serial
2) eMMC / sd card
3) USB
4) GPIO
It has been tested with Arm Trusted Firmware running u-boot as the BL33
executable.
Notes:
This patch adds the header files which will be used in the subsquent
board / drivers to enable support for hi6220 hikey board.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
arch/arm/include/asm/arch-hi6220/hi6220.h | 324 +++
2015-07-08 13:29 GMT+09:00 Masahiro Yamada yamada.masah...@socionext.com:
diff --git a/drivers/core/devres.c b/drivers/core/devres.c
index f24bcac..71f2f67 100644
--- a/drivers/core/devres.c
+++ b/drivers/core/devres.c
@@ -13,6 +13,7 @@
#include linux/kernel.h
#include linux/list.h
Hi Simon,
2015-07-07 2:32 GMT+09:00 Simon Glass s...@chromium.org:
Hi Masahiro,
On 6 July 2015 at 11:24, Masahiro Yamada yamada.masah...@socionext.com
wrote:
Hi Simon,
2015-06-24 8:29 GMT+09:00 Simon Glass s...@chromium.org:
+
+static int rk3288_pinctrl_get_periph_id(struct
On 07/08/2015 01:50 PM, ivan.khoronzhuk wrote:
Vitaly,
On 08.07.15 20:26, Vitaly Andrianov wrote:
On 07/08/2015 01:05 PM, Ivan Khoronzhuk wrote:
Vitaly,
On 08.07.15 20:05, Vitaly Andrianov wrote:
On 07/08/2015 12:38 PM, Ivan Khoronzhuk wrote:
Hi, Vitaly
I suppose it's better to
On 07/08/2015 12:38 PM, Ivan Khoronzhuk wrote:
Hi, Vitaly
I suppose it's better to decide in upper driver how to use swinfo field.
Like in drivers/net/keystone_net.c
The keystone navigator supposed to be used as a tool for communicating
between different IPs, and each of them decide how to
On 07/08/2015 01:05 PM, Ivan Khoronzhuk wrote:
Vitaly,
On 08.07.15 20:05, Vitaly Andrianov wrote:
On 07/08/2015 12:38 PM, Ivan Khoronzhuk wrote:
Hi, Vitaly
I suppose it's better to decide in upper driver how to use swinfo field.
Like in drivers/net/keystone_net.c
The keystone navigator
On Wed, Jul 08, 2015 at 04:52:43PM +0200, Hans de Goede wrote:
Hi Tom,
One of the sunxi dts files for a new board got merged into the
upstream kernel under a different name than that it was originally
submitted with. This pull-req contains a single patch adjusting
the name in u-boot, so
On Mon, Jun 15, 2015 at 06:40:19PM +0800, Bin Meng wrote:
commit f566c99 net: Update hardware MAC address if it changes in env
removes writing MAC address to designware controller after soft reset.
This makes designware ethernet port fail to work. Actually the MAC
address should always be
Hi Vladimir,
Thanks for taking the time to test this patch.
After further investigation, the issue was with our internal Micrel KSZ8031RNL
phy implementation.
The extra 10ms delay is not require. This patch should be discard.
Thanks for the feedback regarding the mail system;
- for an internal
Hi,
On 08-07-15 17:02, Marek Vasut wrote:
On Wednesday, July 08, 2015 at 04:54:07 PM, Hans de Goede wrote:
USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do not like this.
Currently we power off the USB ports both on a usb reset and
Hello Albert,
On Monday 06 July 2015, 23:26:41 wrote Albert ARIBAUD:
On Mon, 06 Jul 2015 20:24:31 +0200, Alexander Stein
alexander...@web.de wrote:
Hello Albert,
On Monday 06 July 2015, 09:39:40 wrote Albert ARIBAUD:
On Sat, 4 Jul 2015 11:48:39 +0200, Alexander Stein
HW coherency won't work properly for CAAM write transactions
if AWCACHE is left to default (POR) value - 4'b0001.
It has to be programmed to 4'b0010.
For platforms that have HW coherency support:
-PPC-based: the update has no effect; CAAM coherency already works
due to the IOMMU (PAMU) driver
+Hans
Hi Joe,
On 7 July 2015 at 22:04, Joe Hershberger joe.hershber...@gmail.com wrote:
Hi Simon,
On Tue, Jul 7, 2015 at 9:53 PM, Simon Glass s...@chromium.org wrote:
For USB Ethernet devices we need to use the usbethaddr environment variable
(instead of ethaddr) the Ethernet hardware
Hi Hans,
On 8 July 2015 at 08:16, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 08-07-15 16:08, Simon Glass wrote:
+Masahiro
Hi Hans,
On 8 July 2015 at 05:56, Hans de Goede hdego...@redhat.com wrote:
Hi Simon,
On 07-07-15 09:00, Hans de Goede wrote:
Hi,
On 06-07-15 18:39,
On Wednesday, July 08, 2015 at 07:49:37 PM, Hans de Goede wrote:
Hi,
Hi!
On 08-07-15 17:02, Marek Vasut wrote:
On Wednesday, July 08, 2015 at 04:54:07 PM, Hans de Goede wrote:
USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do
On 07/07/2015 12:04 AM, Marcel Ziswiler wrote:
On 6 July 2015 18:38:21 CEST, Simon Glass s...@chromium.org wrote:
Out of interest, is this just a message for the user? Why is it useful?
Well, we or customers might do other interesting things on entering rcm like
stopping autoboot or
Signed-off-by: Horia Geantă horia.gea...@freescale.com
---
drivers/crypto/fsl/sec.c | 17 -
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/crypto/fsl/sec.c b/drivers/crypto/fsl/sec.c
index b25b1a4052d2..0940faf768cc 100644
--- a/drivers/crypto/fsl/sec.c
+++
Use fdt_setprop_u32() instead of fdt_setprop().
Fixes: 0181937fa371a (crypto/fsl: Add fixup for crypto node)
Signed-off-by: Horia Geantă horia.gea...@freescale.com
Reviewed-by: Mingkai Hu mingkai...@freescale.com
---
drivers/crypto/fsl/sec.c | 3 +--
1 file changed, 1 insertion(+), 2
Hi, Vitaly
I suppose it's better to decide in upper driver how to use swinfo field.
Like in drivers/net/keystone_net.c
The keystone navigator supposed to be used as a tool for communicating
between different IPs, and each of them decide how to use swinfo fields.
It's protocol specific
Hi Bin,
On 8 July 2015 at 07:50, Bin Meng bmeng...@gmail.com wrote:
Remove duplicated entry of OF_CONTROL in crownbay_defconfig and
minnowmax_defconfig which causes a warning when making defconfig.
The updated defconfig files are generated by 'make savedefconfig'.
Signed-off-by: Bin Meng
On 08.07.15 22:22, ivan.khoronzhuk wrote:
Vitaly,
On 08.07.15 21:28, Vitaly Andrianov wrote:
On 07/08/2015 01:50 PM, ivan.khoronzhuk wrote:
Vitaly,
On 08.07.15 20:26, Vitaly Andrianov wrote:
On 07/08/2015 01:05 PM, Ivan Khoronzhuk wrote:
Vitaly,
On 08.07.15 20:05, Vitaly Andrianov
Hi Joe,
On 8 July 2015 at 14:43, Joe Hershberger joe.hershber...@gmail.com wrote:
Hi Simon,
On Wed, Jul 8, 2015 at 3:31 PM, Simon Glass s...@chromium.org wrote:
+Hans
Hi Joe,
On 7 July 2015 at 22:04, Joe Hershberger joe.hershber...@gmail.com wrote:
Hi Simon,
On Tue, Jul 7, 2015 at 9:53
After extension of the dfu_get_buf() to also setup (implicitly) the dfu_buf_size
variable it is not needed to set dfu_buf_size to CONFIG_SYS_DFU_DATA_BUF_SIZE.
This variable is set in the dfu_get_buf() by not only considering
CONFIG_SYS_DFU_DATA_BUF but more importantly the dfu_bufsiz env
Hi, Vitaly
I suppose it's better to decide in upper driver how to use swinfo field.
Like in drivers/net/keystone_net.c
The keystone navigator supposed to be used as a tool for communicating
between different IPs, and each of them decide how to use swinfo fields.
It's protocol specific
Vitaly,
On 08.07.15 20:05, Vitaly Andrianov wrote:
On 07/08/2015 12:38 PM, Ivan Khoronzhuk wrote:
Hi, Vitaly
I suppose it's better to decide in upper driver how to use swinfo field.
Like in drivers/net/keystone_net.c
The keystone navigator supposed to be used as a tool for communicating
Vitaly,
On 08.07.15 21:28, Vitaly Andrianov wrote:
On 07/08/2015 01:50 PM, ivan.khoronzhuk wrote:
Vitaly,
On 08.07.15 20:26, Vitaly Andrianov wrote:
On 07/08/2015 01:05 PM, Ivan Khoronzhuk wrote:
Vitaly,
On 08.07.15 20:05, Vitaly Andrianov wrote:
On 07/08/2015 12:38 PM, Ivan
Vitaly,
On 08.07.15 20:26, Vitaly Andrianov wrote:
On 07/08/2015 01:05 PM, Ivan Khoronzhuk wrote:
Vitaly,
On 08.07.15 20:05, Vitaly Andrianov wrote:
On 07/08/2015 12:38 PM, Ivan Khoronzhuk wrote:
Hi, Vitaly
I suppose it's better to decide in upper driver how to use swinfo
field.
Like
Hi Masahiro,
On 8 July 2015 at 03:35, Masahiro Yamada yamada.masah...@socionext.com wrote:
Hi Simon,
2015-07-07 2:32 GMT+09:00 Simon Glass s...@chromium.org:
Hi Masahiro,
On 6 July 2015 at 11:24, Masahiro Yamada yamada.masah...@socionext.com
wrote:
Hi Simon,
2015-06-24 8:29
On 6/26/2015 7:53 PM, Haikun Wang wrote:
From: Haikun Wang haikun.w...@freescale.com
Bring in required device tree files for ls2085a from Linux.
These are initially unchanged and have a number of pieces not needed by
U-Boot.
Hi Simon,
I got below comment when review this patch internal.
Hi,
On Wed, Jul 8, 2015 at 2:51 PM, Wang Haikun haikun.w...@freescale.com wrote:
On 6/26/2015 7:53 PM, Haikun Wang wrote:
From: Haikun Wang haikun.w...@freescale.com
Bring in required device tree files for ls2085a from Linux.
These are initially unchanged and have a number of pieces not
On 7/8/2015 3:13 PM, Bin Meng wrote:
Hi,
On Wed, Jul 8, 2015 at 2:51 PM, Wang Haikun haikun.w...@freescale.com wrote:
On 6/26/2015 7:53 PM, Haikun Wang wrote:
From: Haikun Wang haikun.w...@freescale.com
Bring in required device tree files for ls2085a from Linux.
These are initially
Hi Joe
On 8 July 2015 05:55:28 CEST, Joe Hershberger joe.hershber...@gmail.com wrote:
Definitely use checkpatch.pl on this series.
Yeah, it's been late and I somehow forgot about it. I already run v2 about to
be posted through it now.
I recommend patman.
So far I have not used that one yet
On Wed, Jul 8, 2015 at 12:54 AM, Simon Glass s...@chromium.org wrote:
On 6 July 2015 at 09:28, Yegor Yefremov yegorsli...@googlemail.com wrote:
Signed-off-by: Yegor Yefremov yegorsli...@googlemail.com
---
configs/am335x_baltos_defconfig | 4 ++--
include/configs/baltos.h| 2 --
2
Hello Wolfgang,
On Wed, 08 Jul 2015 00:36:52 +0200, Wolfgang Denk w...@denx.de wrote:
Dear Jagan,
In message
CAD6G_RQnrBWyPp1CyiDxkZ4vme4PB5fNHDX-f2Sf=9cvrod...@mail.gmail.com you
wrote:
I'm running u-boot from u-boot prompt, just like a standalone
application with
On 07/06/2015 02:20 AM, Marcel Ziswiler wrote:
From: Max Krummenacher max.krummenac...@toradex.com
Enable CONFIG_IP_DEFRAG and set CONFIG_TFTP_BLOCKSIZE to 16384.
This increases the tftp download speed considerably.
While at it enable CONFIG_TFTP_TSIZE which limits the progress bar to
fifty
Hello Alexander,
On Wed, 08 Jul 2015 20:15:42 +0200, Alexander Stein
alexander...@web.de wrote:
Hello Albert,
On Monday 06 July 2015, 23:26:41 wrote Albert ARIBAUD:
On Mon, 06 Jul 2015 20:24:31 +0200, Alexander Stein
alexander...@web.de wrote:
Hello Albert,
On Monday 06 July
To improve eTSEC performance on LS1021A Rev2.0,
snooping of all transmit frames from memory and
all transmit BD memory accesses in enabled.
Signed-off-by: Alison Wang alison.w...@freescale.com
---
include/tsec.h | 4
1 file changed, 4 deletions(-)
diff --git a/include/tsec.h
On LS1021A Rev2.0, OCRAM's security level needs to be changed to
non-secure access for SD boot. This patch will allow OCRAM
access permission as R/W in SPL.
Signed-off-by: Alison Wang alison.w...@freescale.com
---
board/freescale/ls1021aqds/ls1021aqds.c | 178 +---
On 07/09/2015 12:57 AM, Peter Griffin wrote:
This patch adds the glue code for hi6220 SoC which has 2x synopsis
dw_mmc controllers. This will be used by the hikey board support
in subsequent patches.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
Hi Simon,
2015-07-09 9:22 GMT+09:00 Simon Glass s...@chromium.org:
Hi Masahiro,
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com
wrote:
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
The temperature calculation must be typecasted to keep the compiler
from sign extending a negative value prior to division.
This fixes an issue where if the CPU temperature is 0C it will get stuck
in the busywait loop until the CPU heats up to 0C.
Cc: Ye Li b37...@freescale.com
Cc: Jason Liu
Hi Bin,
On 8 July 2015 at 18:17, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Jul 9, 2015 at 4:28 AM, Simon Glass s...@chromium.org wrote:
Hi Bin,
On 8 July 2015 at 07:50, Bin Meng bmeng...@gmail.com wrote:
Remove duplicated entry of OF_CONTROL in crownbay_defconfig and
Hi Stefan,
-Original Message-
From: Vikas MANOCHA
Sent: Wednesday, July 01, 2015 9:25 AM
To: 'Stefan Roese'
Cc: 'u-boot@lists.denx.de'; 'grmo...@opensource.altera.com';
'dingu...@opensource.altera.com'; 'jt...@openedev.com'
Subject: RE: [PATCH RESEND 0/7] spi: cadence_qspi:
On Tue, Jul 07, 2015 at 03:48:26PM +0800, tang yuantian wrote:
From: Tang Yuantian yuantian.t...@freescale.com
When compling under 64bit platforms, there are lots of warnings,
like:
drivers/block/ahci.c:114:18: warning: cast to pointer from integer
of different size
On Wed, 2015-07-08 at 13:58 +0200, Marcel Ziswiler wrote:
From: Marcel Ziswiler marcel.ziswi...@toradex.com
Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:
ERROR: v7_dcache_inval_range - start
On Tue, Jun 9, 2015 at 6:40 AM, Tim Harvey thar...@gateworks.com wrote:
Remove the check for temperature being within the min/max range and enter the
busywait cooling loop whenever the CPU temperature is over the critical temp.
This fixes the issue where if a board was booted at a temp greater
Hi Simon,
On Thu, Jul 9, 2015 at 4:28 AM, Simon Glass s...@chromium.org wrote:
Hi Bin,
On 8 July 2015 at 07:50, Bin Meng bmeng...@gmail.com wrote:
Remove duplicated entry of OF_CONTROL in crownbay_defconfig and
minnowmax_defconfig which causes a warning when making defconfig.
The updated
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com wrote:
The macro cpu_relax() is defined by several headers in different
ways.
arch/{arm,avr32,mips}/include/asm/processor.h defines it as follows:
#define cpu_relax() barrier()
On the other hand,
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com wrote:
Currently, kzalloc() returns zero-filled memory, while kmalloc()
simply ignores the second argument and never fills the memory
area with zeros.
I want kmalloc(size, __GFP_ZERO) to behave as kzalloc() does,
which
Hi Masahiro,
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com wrote:
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com wrote:
devm_kmalloc() is identical to kmalloc() except that the memory
allocated with it is managed and will be automatically released
when the device is removed/unbound.
Likewise for the other variants.
Signed-off-by:
On 7 July 2015 at 22:46, Bin Meng bmeng...@gmail.com wrote:
On Wed, Jul 8, 2015 at 12:29 PM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
These two declarations in arch/x86/include/asm/interrupt.h conflict
with ones in include/linux/compat.h, so x86 boards cannot include
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com wrote:
The vzalloc(size) is equivalent to kzalloc(size, 0). Move it to
include/linux/compat.h as an inline function in order to avoid the
function call overhead.
Signed-off-by: Masahiro Yamada
Hi Masahiro,
On 7 July 2015 at 22:29, Masahiro Yamada yamada.masah...@socionext.com wrote:
Currently, we only have DM_FLAG_ACTIVATED to indicate the device
status, but we still cannot know in which stage is in progress,
binding or probing.
This commit introduces a new flag, DM_FLAG_BOUND,
Hello Masahiro,
On Thu, 9 Jul 2015 14:16:33 +0900, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Hi Simon,
3. How do we handle things like gpio_exynos_bind() which allocs some
data and passes it to a device it creates, as platform data? At
present we don't free it.
So,
1 - 100 of 103 matches
Mail list logo
