This patch adds the glue code for hi6220 SoC which has 2x synopsis dw_mmc controllers. This will be used by the hikey board support in subsequent patches.
Signed-off-by: Peter Griffin <[email protected]> --- arch/arm/include/asm/arch-hi6220/dwmmc.h | 8 +++++ drivers/mmc/Makefile | 1 + drivers/mmc/hi6220_dw_mmc.c | 56 ++++++++++++++++++++++++++++++++ 3 files changed, 65 insertions(+) create mode 100644 arch/arm/include/asm/arch-hi6220/dwmmc.h create mode 100644 drivers/mmc/hi6220_dw_mmc.c diff --git a/arch/arm/include/asm/arch-hi6220/dwmmc.h b/arch/arm/include/asm/arch-hi6220/dwmmc.h new file mode 100644 index 0000000..c747383 --- /dev/null +++ b/arch/arm/include/asm/arch-hi6220/dwmmc.h @@ -0,0 +1,8 @@ +/* + * (C) Copyright 2015 Linaro + * Peter Griffin <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +int hi6220_dwmci_add_port(int index, u32 regbase, int bus_width); diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index ed73687..81a1a8f 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o obj-$(CONFIG_DWMMC) += dw_mmc.o obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o +obj-$(CONFIG_HIKEY_DWMMC) += hi6220_dw_mmc.o obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c new file mode 100644 index 0000000..106f673 --- /dev/null +++ b/drivers/mmc/hi6220_dw_mmc.c @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2015 Linaro + * peter.griffin <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dwmmc.h> +#include <malloc.h> +#include <asm-generic/errno.h> + +#define DWMMC_MAX_CH_NUM 4 + +#define DWMMC_MAX_FREQ 50000000 +#define DWMMC_MIN_FREQ 378000 + +/* Source clock is configured to 100Mhz by ATF bl1*/ +#define MMC0_DEFAULT_FREQ 100000000 + +static int hi6220_dwmci_core_init(struct dwmci_host *host, int index) +{ + host->name = "HiKey DWMMC"; + + host->dev_index = index; + + /* Add the mmc channel to be registered with mmc core */ + if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) { + printf("DWMMC%d registration failed\n", index); + return -1; + } + return 0; +} + +/* + * This function adds the mmc channel to be registered with mmc core. + * index - mmc channel number. + * regbase - register base address of mmc channel specified in 'index'. + * bus_width - operating bus width of mmc channel specified in 'index'. + */ +int hi6220_dwmci_add_port(int index, u32 regbase, int bus_width) +{ + struct dwmci_host *host = NULL; + + host = calloc(1, sizeof(struct dwmci_host)); + if (!host) { + error("dwmci_host malloc fail!\n"); + return -ENOMEM; + } + + host->ioaddr = (void *)regbase; + host->buswidth = bus_width; + host->bus_hz = MMC0_DEFAULT_FREQ; + + return hi6220_dwmci_core_init(host, index); +} -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
