Hi Simon,
On Tue, Sep 8, 2015 at 11:50 AM, Simon Glass wrote:
> Hi Bin,
>
> Do you have any other patches that you think should be applied for the
> upcoming release? I'd like to get these in before sending out the last
> big pull request.
>
I have one last Quark patch series I think it's good t
Hi Sergey,
On 7 September 2015 at 09:18, Sergey Temerkhanov
wrote:
> On some systems, UART initialization is performed before running U-Boot.
> This commit allows to skip UART re-initializaion on those systems
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
>
> -
Hi Sergey,
On 7 September 2015 at 09:18, Sergey Temerkhanov
wrote:
> This commit adds the FDT for the ThunderX family of SoCs
>
> Signed-off-by: Sergey Temerkhanov
> Signed-off-by: Radha Mohan Chintakuntla
>
> ---
>
> Changes in v5:
> - Added FDT for ThunderX 88xx series
>
> Changes in v4: None
Hi,
On 6 September 2015 at 08:27, Marek Vasut wrote:
> On Sunday, September 06, 2015 at 03:20:21 PM, Thomas Chou wrote:
>> Hi Marek,
>>
>> >>> I think this will not work on 64bit machines.
>>
>> I tried 64bits with
>>
>> print_lnum("fdt_blob", (u64)gd->fdt_blob);
>>
>> But got this warning,
Hi Gary,
On 7 September 2015 at 03:20, Gary Bisson
wrote:
> Since last API changes for files >2GB, the read of symlink is broken as
> ext4fs_read_file now returns 0 instead of the length of the actual read.
>
> Signed-off-by: Gary Bisson
> ---
> Hi all,
>
> Switching from an old v2014.07 to v201
Hi Bin,
Do you have any other patches that you think should be applied for the
upcoming release? I'd like to get these in before sending out the last
big pull request.
Regards,
Simon
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mail
Using NAKs on empty RX fifo for bulk in transfers is the right choice
for a interrupt driven model, but U-Boot uses polling and expects an
immediate answer if there is no incoming packet. Using ZLP Bulk In Response
(BIR) mode avoids unexpected timeouts in the host controller driver.
As ZLP mode is
Enable SDMMC calibration to determine the best setting for
drvsel and smpsel. It will be triggered whenever there is
a change of card frequency and bus width. This is to ensure
reliable transmission between the controller and the card.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguye
Remove hard-coded SDMMC timing parameter drvsel and smplsel.
This setting now will come from SDMMC calibration
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
---
include/configs/socfpga_common.h |2 --
1 files changed, 0 insertions(+), 2 d
Hi,
On Mon, 2015-09-07 at 03:33 +, Jaehoon Chung wrote:
> Hi,
>
> On 09/04/2015 07:41 PM, Pavel Machek wrote:
> > Hi!
> >
> >>> How is this SMPLSEL and DRVSEL implemented on Exynos ?
> >
> > Exynos is using CLKSEL register in dw-mmc controller.
> > It's exynos specific regist
With a working QSPI calibration, the SCLK can now run up to 100MHz
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Vikas Manocha
Cc: Jagannadh Teki
Cc: Pavel Machek
Reviewed-by: Marek Vasut
---
arch/arm/dts/socfpga_cyclone5_socdk.dts |
Ensure the intended SCLK frequency not exceeding the maximum
frequency. If that happen, SCLK will set to maximum frequency.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Vikas Manocha
Cc: Jagannadh Teki
Cc: Pavel Machek
---
drivers/spi/
Ensuring spi_calibration is run when there is a change of sclk
frequency. This will ensure the qspi flash access works for high
sclk frequency
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Vikas Manocha
Cc: Jagannadh Teki
Cc: Pavel Machek
Fix the fdt read for spi-max-frequency as it's contained
in the child node. Current state of code is always
returning default value.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Vikas Manocha
Cc: Jagannadh Teki
Cc: Pavel Machek
---
Chan
Hi,
On Thu, 2015-09-03 at 16:19 +0200, ma...@denx.de wrote:
> On Thursday, September 03, 2015 at 03:42:00 PM, Chin Liang See wrote:
> > Fix the fdt read for spi-max-frequency as it's contained
> > in the child node. Current state of code is always
> > returning default value.
> >
> > Signed-off-b
Hi,
On Thu, 2015-09-03 at 16:17 +0200, ma...@denx.de wrote:
> On Thursday, September 03, 2015 at 03:41:59 PM, Chin Liang See wrote:
> > Ensuring spi_calibration is run when there is a change of sclk
> > frequency. This will ensure the qspi flash access works for high
> > sclk frequency
> >
> > Si
Hi,
On Wed, Aug 26, 2015 at 06:19:38AM -0700, Simon Glass wrote:
>On 26 August 2015 at 00:41, Peng Fan wrote:
>> Should use FSL_SEC_MON, not CONFIG_FSL_SEC_MON as Kconfig entry.
>>
>> Signed-off-by: Peng Fan
>> Cc: Simon Glass
>> Cc: Masahiro Yamada
>> Cc: Fabio Estevam
>> Cc: York Sun
>> Cc
Hey all,
I've pushed v2015.10-rc3 out to the repository and tarballs should exist
soon.
I think this looks reasonable overall and we're on pace for release.
There's certainly a few fixes that need to come in but at least in the
case of the 64bit fdt nodes I want to be sure that we get a change in
On Mon, Sep 07, 2015 at 10:46:26AM +, Alexey Brodkin wrote:
> Hi Tom,
>
> The following changes since commit 6015f8f1b6fc30de7b4839bd691058583ec7f521:
>
> doc: document the fdtdir PXE command (2015-09-03 16:59:07 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/
On Mon, Sep 07, 2015 at 02:13:06PM +0200, Marek Vasut wrote:
> The following changes since commit 6015f8f1b6fc30de7b4839bd691058583ec7f521:
>
> doc: document the fdtdir PXE command (2015-09-03 16:59:07 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-socfpga.g
On Mon, Sep 07, 2015 at 02:13:41PM +0200, Marek Vasut wrote:
> The following changes since commit 6015f8f1b6fc30de7b4839bd691058583ec7f521:
>
> doc: document the fdtdir PXE command (2015-09-03 16:59:07 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-usb.git
priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.
This patch also replaces formatting string to use
speed instead
priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.
This patch also replaces formatting string to use
speed instead
priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.
This patch also replaces formatting string to use
speed instead
This patch adds code which sets up 2-level page tables on ARM64 thus
extending available VA space. CPUs implementing 64k translation
granule are able to use direct PA-VA mapping of the whole 48 bit
address space.
It also adds the ability to reset the SCTRL register at the very beginning
of executio
This patch series adds support for Cavium ThunderX 88xx SoC family
(http://cavium.com/ThunderX_ARM_Processors.html)
This is the version 5 of the series I posted at
http://lists.denx.de/pipermail/u-boot/2015-August/224324.html
http://lists.denx.de/pipermail/u-boot/2015-August/223618.html
Changes
On 7 September 2015 at 12:09, Mirza Krak wrote:
> From: Mirza Krak
>
> Respect the mode passed in claim_bus call.
>
> Signed-off-by: Mirza Krak
> ---
>
> Changes in v2:
> * Refactor clearing the CPOL and CPHA bits. Based on comments from Jagan Teki.
>
> drivers/spi/tegra20_slink.c | 17
This commit adds basic Cavium ThunderX 88xx board definitions and support.
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
---
Changes in v5:
- Added CONFIG_OF_CONTROL support
- Changed memory attributes
Changes in v4:
- Moved CONFIG_SYS_PROMPT to configs/thunderx_88
This commit adds functions issuing calls to the product-specific ATF
services
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
board/cavium/thunderx/Makefile | 2 +-
board/cavium/th
Change the dram_init() function on ThunderX to query ATF services for
the real installed DRAM size
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
DRAM fix
---
Changes in v5:
- Moved dram_init() from a separate file to thunderx.c
Changes in v4: None
Changes in v3: No
This commit adds functions issuing calls to secure monitor or
hypervisore. This allows using services such as Power State
Coordination Interface (PSCI) provided by firmware, e.g. ARM
Trusted Firmware (ATF)
The SMC call can destroy all registers declared temporary by the
calling conventions. The cl
This commit adds the psci.h header file from Linux kernel
which contains definitions related to the PSCI interface provided
by firmware
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
This commit adds the FDT for the ThunderX family of SoCs
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
---
Changes in v5:
- Added FDT for ThunderX 88xx series
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/dts/Makefile | 1 +
arc
On some systems, UART initialization is performed before running U-Boot.
This commit allows to skip UART re-initializaion on those systems
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
---
Changes in v5:
- Added OF control support
Changes in v4:
- Fixed build warni
This patch adds the read_mpidr() function which returns the
MPIDR_EL1 register value
Signed-off-by: Sergey Temerkhanov
Signed-off-by: Radha Mohan Chintakuntla
Reviewed-by: Simon Glass
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/include/asm/sy
Hi Marek,
On 09/07/2015 05:29 PM, Marek Vasut wrote:
Nice, I like seeing how NIOS2 getting back to shape. btw you could have
waited a few days before applying patches that were just posted.
Thanks for reminding. I used to wait a week. But I hate too many things
floating around, that would pre
Hi Marek,
On 09/07/2015 08:31 PM, Marek Vasut wrote:
Move the timer code from interrupts.c into timer.c . Eliminate the
installation of timer interrupt handler, which is no longer used.
Signed-off-by: Marek Vasut
---
arch/nios2/cpu/Makefile | 2 +-
arch/nios2/cpu/interrupts.c |
Hi Marek,
On 09/07/2015 08:31 PM, Marek Vasut wrote:
Zap almost all of the ad-hoc timer code from interrupts.c and
use the code in lib/time.c instead.
Signed-off-by: Marek Vasut
---
arch/nios2/cpu/interrupts.c | 132
arch/nios2/lib/Makefile
Hello,
Am 07.09.2015 um 08:59 schrieb Peng Fan:
> Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
> because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> Cc: Heiko Schocher
> Cc: Christian Gmeiner
> Cc: Stefan Roese
> Cc:
On Mon, 2015-08-24 at 19:00 +0300, Alexey Brodkin wrote:
> This fixes building in automated flow that doesn't use defconfigs.
>
> See discussion on that topic here:
> http://patchwork.ozlabs.org/patch/502558/
>
> See similar patches for other architectures/platforms here:
> [1]
> http://git.d
Hi there,
I am using u-boot 2015.04. I am trying to use spl mode to boot Linux
without loading u-boot. I am working on the Zynq-7000 zc706 board.
I enabled the debug mode and here is the output:
U-Boot SPL 2015.04 (Sep 07 2015 - 08:22:08)
>>spl:board_init_r()
using memory 0x10c0-0x20c0
On 07.09.2015 13:43, Andreas Bießmann wrote:
From: Heiko Schocher
introduce BIT() definition, used in at91_udc gadget
driver.
Signed-off-by: Heiko Schocher
[remove all other occurrences of BIT(x) definition]
Signed-off-by: Andreas Bießmann
---
Full buildman is running
Would be nice to get s
Hi Tom,
The following changes since commit 6015f8f1b6fc30de7b4839bd691058583ec7f521:
doc: document the fdtdir PXE command (2015-09-03 16:59:07 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arc.git
for you to fetch changes up to a883f83e6d62fef1830b1634ccb72535c43
From: Heiko Schocher
introduce BIT() definition, used in at91_udc gadget
driver.
Signed-off-by: Heiko Schocher
[remove all other occurrences of BIT(x) definition]
Signed-off-by: Andreas Bießmann
---
Full buildman is running
Would be nice to get some Acked-by/Reviewed-by since this is a fixup
Since last API changes for files >2GB, the read of symlink is broken as
ext4fs_read_file now returns 0 instead of the length of the actual read.
Signed-off-by: Gary Bisson
---
Hi all,
Switching from an old v2014.07 to v2015.07 we've noticed that we couldn't
read symlinks any more. This is due to
Bigger source buffer than dest buffer could
overflow when copying strings.
Source and destination buffer sizes are same now.
Signed-off-by: Imran Zaman
---
common/cli_simple.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cli_simple.c b/common/cli_simple.c
index 00a8
Bigger source buffer than dest buffer could
overflow when copying strings.
Source and destination buffer sizes are same now.
Signed-off-by: Imran Zaman
---
common/cli_simple.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cli_simple.c b/common/cli_simple.c
index 00a8
From: Mirza Krak
Respect the mode passed in claim_bus call.
Signed-off-by: Mirza Krak
---
Changes in v2:
* Refactor clearing the CPOL and CPHA bits. Based on comments from Jagan Teki.
drivers/spi/tegra20_slink.c | 17 +
1 file changed, 17 insertions(+)
diff --git a/drivers/s
On Saturday, September 05, 2015 at 02:10:37 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 09/04/2015 10:08 PM, Marek Vasut wrote:
> > I think I removed this led nonsense somewhere along the way indeed.
> > This is a timer code, not some LED blinking code afterall, so it
> > should not be poluted by
On 7 September 2015 at 17:45, Marek Vasut wrote:
> On Monday, September 07, 2015 at 02:01:11 PM, Andreas Bießmann wrote:
>> Hi Heiko,
>>
>> On 2015-09-07 13:52, Heiko Schocher wrote:
>> > Hello Andreas,
>> >
>> > Am 07.09.2015 um 13:20 schrieb Andreas Bießmann:
>> >> On 08/21/2015 07:01 PM, Heiko
Zap almost all of the ad-hoc timer code from interrupts.c and
use the code in lib/time.c instead.
Signed-off-by: Marek Vasut
---
arch/nios2/cpu/interrupts.c | 132
arch/nios2/lib/Makefile | 1 -
arch/nios2/lib/time.c | 22 ---
Move the timer code from interrupts.c into timer.c . Eliminate the
installation of timer interrupt handler, which is no longer used.
Signed-off-by: Marek Vasut
---
arch/nios2/cpu/Makefile | 2 +-
arch/nios2/cpu/interrupts.c | 84 +
arch/nios2/
On Monday, September 07, 2015 at 02:01:11 PM, Andreas Bießmann wrote:
> Hi Heiko,
>
> On 2015-09-07 13:52, Heiko Schocher wrote:
> > Hello Andreas,
> >
> > Am 07.09.2015 um 13:20 schrieb Andreas Bießmann:
> >> On 08/21/2015 07:01 PM, Heiko Schocher wrote:
> >>> introduce BIT() definition, used in
The following changes since commit 6015f8f1b6fc30de7b4839bd691058583ec7f521:
doc: document the fdtdir PXE command (2015-09-03 16:59:07 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git
for you to fetch changes up to 49b4c5c700077e387fef61a7225f92d190ee0c45:
The following changes since commit 6015f8f1b6fc30de7b4839bd691058583ec7f521:
doc: document the fdtdir PXE command (2015-09-03 16:59:07 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git
for you to fetch changes up to a7ed0ac2620b00c6eb85227f3c66bc169ad11f44
Hi Heiko,
On 2015-09-07 13:52, Heiko Schocher wrote:
Hello Andreas,
Am 07.09.2015 um 13:20 schrieb Andreas Bießmann:
On 08/21/2015 07:01 PM, Heiko Schocher wrote:
introduce BIT() definition, used in at91_udc gadget
driver.
Signed-off-by: Heiko Schocher
NAK, this one breaks a lot of board
Hello Andreas,
Am 07.09.2015 um 13:20 schrieb Andreas Bießmann:
On 08/21/2015 07:01 PM, Heiko Schocher wrote:
introduce BIT() definition, used in at91_udc gadget
driver.
Signed-off-by: Heiko Schocher
NAK, this one breaks a lot of boards which already defined BIT()
Uhh... seems this BIT()
On 09/07/2015 10:49 AM, Thomas Chou wrote:
Enable the Driver Model config. The driver subsystems
are not enabled until we enable each of them.
Signed-off-by: Thomas Chou
---
configs/nios2-generic_defconfig | 2 ++
1 file changed, 2 insertions(+)
Applied to u-boot-nios.
__
On 08/21/2015 07:01 PM, Heiko Schocher wrote:
> introduce BIT() definition, used in at91_udc gadget
> driver.
>
> Signed-off-by: Heiko Schocher
>
NAK, this one breaks a lot of boards which already defined BIT()
> ---
>
> Changes in v4: None
> Changes in v3:
> - new in v3
>
> Changes in v2: N
Hi Marek,
On 09/07/2015 05:32 PM, Marek Vasut wrote:
Could you please rebase and submit this series again?
Yes, that's my plan shortly. We're aiming for after 2015.10 release
with all these NIOS changes, so this is not urgent, right ?
Yes, they will be after 2015.10. No hurry. I just hope to
On Sat, Aug 22, 2015 at 3:36 AM, Simon Glass wrote:
> Hi Serkey,
>
> On 18 August 2015 at 06:26, Sergey Temerkhanov
> wrote:
>> On some systems, UART initialization is performed before running U-Boot.
>> This commit allows to skip UART re-initializaion on those systems
>>
>> Signed-off-by: Serge
2015-09-07 8:59 GMT+02:00 Peng Fan :
> Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
> because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> Cc: Heiko Schocher
> Cc: Christian Gmeiner
> Cc: Stefan Roese
> Cc: Troy Kisky
>
On Monday, September 07, 2015 at 03:10:18 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 09/04/2015 10:08 PM, Marek Vasut wrote:
> >> The patch cannot apply to board_f.c due to conflict in
> >>
> >> commit 2e88bb28d8061286d2f1cabcac224df15b941b82
> >> NDS32: Generic Board Support and Unsupport
> >
On Monday, September 07, 2015 at 04:49:20 AM, Thomas Chou wrote:
> Enable the Driver Model config. The driver subsystems
> are not enabled until we enable each of them.
>
> Signed-off-by: Thomas Chou
Cool, let's do this :)
Acked-by: Marek Vasut
Best regards,
Marek Vasut
__
On Monday, September 07, 2015 at 03:03:19 AM, Thomas Chou wrote:
> These patches add device tree control of U-Boot to nios2 boards.
>
> v2
> use SPDX license header.
> use fdt relocation in board_init_f.
> v3
> fix comment style.
> v4
> drop fdt_blob print in board info, which needs more d
On Monday, September 07, 2015 at 03:47:46 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 09/07/2015 08:53 AM, Marek Vasut wrote:
> > Where did that 64KB figure come from ? :O
>
> This is estimated from 41KB of the SPL of socfpga. The code density of
> nios2 is worse than ARM.
>
> > I assume the si
On Monday, September 07, 2015 at 11:20:03 AM, Stefan Roese wrote:
> On 07.09.2015 08:59, Peng Fan wrote:
> > Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
> > because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.
> >
> > Signed-off-by: Peng Fan
> > Cc: Stefano Babic
> > Cc:
On 07.09.2015 08:59, Peng Fan wrote:
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Troy Kisky
Cc: Nikita Kirya
On Sun, 2015-09-06 at 13:22 +0200, Maxime Ripard wrote:
> On Fri, Sep 04, 2015 at 12:59:24PM -0400, Tom Rini wrote:
> > On Tue, Sep 01, 2015 at 09:57:16AM +0200, Maxime Ripard wrote:
> >
> > [snip]
> > > Of course, this will all depend on the ratio between the empty space
> > > and the files thems
prepare driver for device model migration
Signed-off-by: Mugunthan V N
Reviewed-by: Simon Glass
---
drivers/net/cpsw.c | 133 +++--
1 file changed, 89 insertions(+), 44 deletions(-)
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index fb4d6
adopt cpsw driver to device driver model
Signed-off-by: Mugunthan V N
Reviewed-by: Simon Glass
---
drivers/net/cpsw.c | 245 -
include/cpsw.h | 2 +
2 files changed, 246 insertions(+), 1 deletion(-)
diff --git a/drivers/net/cpsw.c b/dri
enable ethernet driver model for am335x gp evm as cpsw supports
driver model
Signed-off-by: Mugunthan V N
---
configs/am335x_gp_evm_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/am335x_gp_evm_defconfig b/configs/am335x_gp_evm_defconfig
index 62d3b6b..c87d7a9 100644
--- a/
enable ethernet driver model for am335x beagle bone black as cpsw
supports driver model
Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
---
configs/am335x_boneblack_vboot_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/am335x_boneblack_vboot_defconfig
b/configs/am335x_
Prepare board file so that ethernet registration are
commented for DM conversion
Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
---
board/ti/am335x/board.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 1dc2ed0..f0cb1e2 100
This patch seires enables cpsw to adopt driver model. This has
been tested on AM335x beagle bone black and GP EVM (logs [1]).
Also pushed a branch for testing [2]
This patch depends on [3] for getting cpsw address space from DT
[1]: http://pastebin.ubuntu.com/12305998/
[2]: git://git.ti.com/~mugu
Since usb ether gadget doesn't have support for driver model, so
not defining usb ether gadget when ethernet driver model is
defined.
Signed-off-by: Mugunthan V N
Reviewed-by: Tom Rini
---
include/configs/am335x_evm.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/am335x
Hi,
On 09/04/2015 07:41 PM, Pavel Machek wrote:
> Hi!
>
>>> How is this SMPLSEL and DRVSEL implemented on Exynos ?
>
> Exynos is using CLKSEL register in dw-mmc controller.
> It's exynos specific register in dwmmc controller. It's also
> represented 45 degree increment. SELCK_
On Friday 07 August 2015 03:01 AM, Stephen Warren wrote:
> From: Stephen Warren
>
> fdtdec_get_addr_size() hard-codes the number of cells used to represent
> an address or size in DT. This is incorrect in many cases depending on
> the DT binding for a particular node or property (e.g. it is incor
Check maximum ecc strength for each platfrom to avoid the calculated ecc
exceed the limitation.
Signed-off-by: Peng Fan
Signed-off-by: Han Xu
Tested-By: Tim Harvey
Reviewed-by: Marek Vasut
Acked-by: Scott Wood
Cc: Stefano Babic
---
Original V2 mail thread:
http://lists.denx.de/pipermail/u-b
Hi Marek,
On 09/04/2015 05:51 PM, Marek Vasut wrote
diff --git a/arch/nios2/cpu/timer.c b/arch/nios2/cpu/timer.c
new file mode 100644
index 000..006b19b
--- /dev/null
+++ b/arch/nios2/cpu/timer.c
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, w
Discard the 'select CPU_V7' from Kconfig in arch/arm/cpu/armv7/mx6
for different targets, because ARCH_MX6 selects CPU_V7.
Signed-off-by: Peng Fan
Cc: Stefano Babic
---
arch/arm/cpu/armv7/mx6/Kconfig | 24
1 file changed, 24 deletions(-)
diff --git a/arch/arm/cpu/armv7
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Troy Kisky
Cc: Nikita Kiryanov
Cc: "Eric Bénard"
Cc: Fabio Estev
82 matches
Mail list logo