Hi Tom,
Please find the PR for master branch targeted for v2021.10-next branch.
Details about the PR are updated in the tag message.
Gitlab CI report:
https://source.denx.de/u-boot/custodians/u-boot-ti/-/pipelines/7780
The following changes since commit e8f720ee1707b43a0e14ade87b40a1f84
On Fri, Apr 30, 2021 at 12:44 AM Siew Chin Lim
wrote:
>
> Legacy boot flow (SPL->U-Boot Proper->OS) boot to OS via Kernel Image and
> dtb files using booti command.
>
> ATF boot flow (SPL->ATF->U-Boot Proper->OS) boot to OS via kernel.itb file
> using bootm command.
>
> Change to use CONFIG_SPL_AT
On Mon, May 31, 2021 at 6:12 PM Zhiqiang Hou wrote:
>
> From: Hou Zhiqiang
>
> Added check for return value of e1000_read_phy_reg().
>
> Signed-off-by: Hou Zhiqiang
> ---
> drivers/net/e1000.c | 12
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/e100
On Thu, Jun 3, 2021 at 10:52 AM Heinrich Schuchardt wrote:
>
> Commit 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") leads to
> network failure on the OrangePi PC.
>
> => dhcp
> sun8i_emac_eth_start: Timeout
>
> According to the commit message the change of the MDIO frequency is on
Hi Rasmus,
On 09.06.21 00:41, Rasmus Villemoes wrote:
On 28/05/2021 00.00, Rasmus Villemoes wrote:
This series is an attempt at expanding the wdt-uclass provided
watchdog_reset() to handle all DM watchdogs, not just the first
one. As a sort of nice side effect, it turns out that doing that make
On 08.06.21 12:00, Heinrich Schuchardt wrote:
0x0400- 0x0600 is reserved memory. We cannot load to anything here.
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
include/configs/mvebu_armada-8k.h | 10 +-
1 file changed, 5 insertions(+),
Hi Pali,
On 08.06.21 11:51, Pali Rohár wrote:
On Monday 07 June 2021 16:34:50 Marek Behún wrote:
Add nodes for SPI NOR partitions to the device tree of Turris MOX, as
are in Linux' device tree.
This patch is not needed (for now) as U-Boot cannot parse SPI NOR
partitions from DT yet. U-Boot fo
On 07.06.21 16:34, Marek Behún wrote:
Enable configuration options to support Turris network boot. This
includes FIT support and some crypto commands.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
configs/turris_mox_defconfig | 8
1 file changed, 8 in
On 07.06.21 16:34, Marek Behún wrote:
Add nodes for SPI NOR partitions to the device tree of Turris MOX, as
are in Linux' device tree.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
arch/arm/dts/armada-3720-turris-mox.dts | 31 +
1 file
On 07.06.21 16:34, Marek Behún wrote:
Add default fdtfile environment variable with value
marvell/armada-3720-turris-mox.dtb.
This can be useful for some boot scenarios.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
include/configs/turris_mox.h | 1 +
1 file
On 07.06.21 16:34, Marek Behún wrote:
Configure blinking on ethernet PHY LEDs on the MOX A board when entering
rescue mode via reset button.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
board/CZ.NIC/turris_mox/turris_mox.c | 35
1
On 07.06.21 16:34, Marek Behún wrote:
Add necessary config options and board code to support board factory
reset / rescue mode on Turris MOX.
In order to also support invoking rescue mode from U-Boot console,
without having to press the factory reset button, put the rescue command
into `bootcmd_
On 07.06.21 16:34, Marek Behún wrote:
Add nodes for indicator LED and reset button so that board code can
implement board factory reset mechanism.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
arch/arm/dts/armada-3720-turris-mox.dts | 24 +++
Hi Priyanka
On 2021-06-08 4:07 a.m., Priyanka Jain wrote:
Add "Priyanka Jain " as
MAINTAINER for p2041rdb board.
Signed-off-by: Priyanka Jain
---
board/freescale/p2041rdb/MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/p2041rdb/MAINTAINERS
Hi,
Sean Anderson 於 2021年6月4日 週五 下午2:22寫道:
>
>
>
> On 6/4/21 1:05 PM, Zhengxun wrote:
> > The Clocking Wizard IP supports clock circuits customized
> > to your clocking requirements. The wizard support for
> > dynamically reconfiguring the clocking primitives for
> > Multiply, Divide, Phase Shift
On 6/8/21 9:54 AM, Kunihiko Hayashi wrote:
Hi,
[...]
I would expect that after relocation, if all you have is env_nowhere
driver, the env_nowhere_init() is called again from the first
for() loop
of env_init() [1], which would set gd->env_valid to ENV_INVALID
[1], and
that for() loop would ex
On Mon, May 17, 2021 at 06:20:38PM -0300, Joao Marcos Costa wrote:
> The fragmented files were not correctly read because of two issues:
>
> - The squashfs_file_info struct has a field named 'comp', which tells if
> the file's fragment is compressed or not. This field was always set to
> 'true' i
Refactors the NXP I2C mux driver to clean up duplicate code and allow it to
be disabled with a config.
New config: CONFIG_FSL_USE_PCA9547_MUX. Defaults to Y since this
multiplexer was always enabled before on these targets. When enabled, adds
functions for selecting the current I2C channel on th
On Fri, Jun 04, 2021 at 10:02:04PM +0300, Alper Nebi Yasak wrote:
> The EFI secure boot and capsule test setups need to prepare disk images
> for their tests using virt-make-fs, which requires access to the host
> fuse device. This is not exposed to the docker container by default and
> has to be
On Wed, Jun 09, 2021 at 09:20:20PM +0200, Christian Melki wrote:
> On 6/9/21 8:31 PM, Tom Rini wrote:
> > On Mon, Jun 07, 2021 at 11:20:47AM +0200, Christian Melki wrote:
> >
> >> A newer toolchain will emit udivmoddi4 for certain divide + modulo
> >> operations instead of a separate divide and mo
On 6/9/21 8:31 PM, Tom Rini wrote:
> On Mon, Jun 07, 2021 at 11:20:47AM +0200, Christian Melki wrote:
>
>> A newer toolchain will emit udivmoddi4 for certain divide + modulo
>> operations instead of a separate divide and modulo operation.
>> AFAIU, this would be sufficient.
>>
>> Signed-off-by: Ch
On Wed, Jun 09, 2021 at 03:21:54PM -0300, João Marcos Costa wrote:
> Hello,
>
> In fact, I really think this patch should be applied to master as soon
> as possible, since the actual unsafety comes from the current code,
> which may read past the fragment_block buffer size.
> Besides, the patch s
By the way, I apologize for the top-posting on this previous email I sent.
On Mon, Jun 07, 2021 at 11:20:47AM +0200, Christian Melki wrote:
> A newer toolchain will emit udivmoddi4 for certain divide + modulo
> operations instead of a separate divide and modulo operation.
> AFAIU, this would be sufficient.
>
> Signed-off-by: Christian Melki
> ---
> arch/x86/lib/div64.
Hello,
In fact, I really think this patch should be applied to master as soon
as possible, since the actual unsafety comes from the current code,
which may read past the fragment_block buffer size.
Besides, the patch series I sent to rewrite the test suite needs this
fix, and the current test suit
On Wed, Jun 09, 2021 at 01:02:02PM +0200, Marek Vasut wrote:
> A few remaining fixes for this release ...
>
> The following changes since commit e3b64beda5dd1a6b6bedfd1fe0e50be1ddea7044:
>
> Prepare v2021.07-rc4 (2021-06-07 09:26:39 -0400)
>
> are available in the Git repository at:
>
> gi
On Wed, Jun 09, 2021 at 12:50:54PM +0200, Heinrich Schuchardt wrote:
> Dear Tom,
>
> The following changes since commit cb26d5a9265c60cee385d67eff86d115a606fbc5:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-sh (2021-06-08
> 17:46:49 -0400)
>
> are available in the Git repository
Hi Sean,
Many thanks for reviewing our patches. I've been meaning to fix the problems
in your comments and send the next patch directly, yet ran into some new
problems :P
Apologies for the delay in replying.
On 6/7/2021 1:10 AM, Sean Anderson wrote:
On 6/4/21 12:54 AM, Tianrui Wei wrote:
On Wed, Jun 09, 2021 at 10:16:53AM -0300, João Marcos Costa wrote:
> Hello, everyone
>
> Em qua., 26 de mai. de 2021 às 09:35, João Marcos Costa <
> jmcosta...@gmail.com> escreveu:
>
> > Hello, Miquèl
> >
> > Em qua., 26 de mai. de 2021 às 04:52, Miquel Raynal <
> > miquel.ray...@bootlin.com> esc
On 03/06/21 12:02 pm, Tero Kristo wrote:
> Hi,
>
> As requested, this is just a rebase to the latest u-boot tip.
>
> Boot tested on j721e to make sure nothing got broken.
Applied to u-boot-ti for-next.
Thanks and regards,
Lokesh
>
> -Tero
>
>
On Wed, 2 Jun 2021 22:37:57 +0200, Dario Binacchi wrote:
> The series adds driver model support for omap RTC plus some fixes.
>
> Changes in v2:
> - Separated from Kconfig patch
> - Use consistent naming (omap_rtc_.
> - Remove non-DM support. It's no more used.
>
> [...]
Applied to https://sour
On Mon, 7 Jun 2021 19:47:46 +0530, Vignesh Raghavendra wrote:
> This series add DMA support for R5 SPL on J721e/J7200 SoCs post HSM
> Rearch.
>
> Depends on Tero's base HSM rearch support series.
>
> v2:
> Use IS_ENABLED() consistentially instead of #ifdef
> Reword commit msg for 5/7 as suggested
On Thu, 3 Jun 2021 08:14:53 -0500, prane...@ti.com wrote:
> Update the ddr settings to use the DDR reg config tool rev 0.5.0.
> This enables 2666MTs LPDDR configuration on J7200.
Applied to https://source.denx.de/u-boot/custodians/u-boot-ti.git master,
thanks!
[1/1] arm: dts: k3-j7200: ddr: Upda
On Tue, 9 Mar 2021 21:19:15 +0100, Pali Rohár wrote:
> Also convert CONFIG_HW_WATCHDOG to CONFIG_WATCHDOG.
Applied to https://source.denx.de/u-boot/custodians/u-boot-ti.git master,
thanks!
[1/1] Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning
https://source.denx.de/u-boot/cust
On Fri, 4 Jun 2021 22:00:30 +0530, Aswath Govindraju wrote:
> The following series of patches add support for the following
> - Kconfig symbol for giving the load address for ATF
> - USB Mass storage boot mode in AM642-EVM
> - DFU boot mode in AM642-EVM
> - Host and peripheral modes for AM642-EVM i
Hi Peng,
On 10/05/21 7:18 pm, Aswath Govindraju wrote:
> Hi Peng,
>
> On 07/04/21 3:52 am, Jaehoon Chung wrote:
>> On 4/5/21 11:44 PM, Aswath Govindraju wrote:
>>> From: Faiz Abbas
>>>
>>> Enable HS400 speed mode by writing to HOST_CONTROL2 register.
>>>
>>> Signed-off-by: Faiz Abbas
>>> Signed
We currently define the EFI support of an SMBIOS table as the third bit of
"BIOS Characteristics Extension Byte 1". The latest DMTF spec defines it
on "BIOS Characteristics Extension Byte 2".
Signed-off-by: Ilias Apalodimas
---
include/smbios.h | 2 +-
lib/smbios.c | 5 +++--
2 files change
> Add support for Storopack's SMEGW01 board, which is an
> IoT gateway based on the i.MX7D SoC.
> Based on the original U-Boot work done by Phytec.
> Signed-off-by: Fabio Estevam
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
> Usb needs IMXRT1050_CLK_USBOH3 clock to be enabled, so let's add it to
> clock driver.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH,
> Since we assume pll5 is the default lcdif clock source let's move
> assigned-clocks(-parents) properties to .dtsi file.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
> Now device_type = "memory" is mandatory to allow u-boot to read memory
> node, so let's add it to memory node.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Soft
> Add gpt1 node for using it as timer.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Mu
> Add gpt1 node for using it as timer.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Mu
> Uncompressed aarch64 kernel Image are rather large, increase the bootm
> size limit to 64 MiB to cater for that.
> Signed-off-by: Marek Vasut
> Cc: Marcel Ziswiler
> Cc: Max Krummenacher
> Cc: Oleksandr Suvorov
> Reviewed-by: Oleksandr Suvorov
Applied to u-boot-imx, master, thanks !
Best re
> Lcd peripheral needs 2 different gates to be enable to work, so let's
> introduce the missing one(LCDIF_PIX) and rename the existing one
> (LCDIF_APB).
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
==
> Clock initialization functionality has ambitious debug messages, which are
> printed out when failures are triggered during execution:
> - Separate frequency table lookup functions have the the same output that
> makes it impossible to understand which function failed and produced the
> outpu
> Enable driver model support for FEC ethernet which allows us to remove
> the iomux and board_eth_init function. Replace the toggling of the ethernet
> phy reset with dt configuration.
> Enable driver model support for PCI which allows us to remove the
> eth1000_initialize() call. Additionally ena
> Some SoC needs "disp_axi" clock to be enabled, so let's try to retrieve it
> and enabling. If it fails it gives only a debug(), but this clock as well
> as "axi" clock is not mandatory.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> This timer driver uses GPT Timer (General Purpose Timer) available on
> a lot of i.MX SoCs family. This driver deals with both 24Mhz oscillator
> as well as peripheral clock.
> Signed-off-by: Giulio Benetti
> [Giulio: added the driver's stub and handled peripheral clock prescaler
> setting makin
> Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ()
> macro, which expands the value provided to the Hz range without taking into
> account the precise Hz setting. This causes the frequency of 266 MHz not ot
> be found in the imx8mm_fracpll_tbl, since it is entered there with a
> Let's set gpt1 as u-boot timer.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich,
> A simple prototyping board with one microSD port, one Ethernet port,
> 2 USB ports, I2C, SPI, GPIO, and UART interfaces.
> Signed-off-by: Oleh Kravchenko
> Cc: Stefano Babic
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
===
> Timer needs to be already enabled in spl, so let's add its node to spl dtb.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managin
> Let's add node label to osc to be used as clock source for other nodes.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Di
> CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
> CPU: Industrial temperature grade (-40C to 105C) at 49C
> Reset cause: POR
> Model: Seeed NPi iMX6ULL Dev Board with NAND
> Board: Seeed NPi i.MX6ULL Dev Board
> DRAM: 512 MiB
> NAND: 512 MiB
> MMC: FSL_SDHC: 0
> In:serial@
> We need those macros to instruct drivers on how to behave for SoC specific
> quirks, so let's add it as done for other i.MX SoCs.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> On some SoC mxsfb needs more than one clock gate(actual "per" clock). So
> let's introduce "axi" clock that can be provided but it's not mandatory.
> This is inspired from linux mxsfb driver. Also let's rename "per" clock to
> "pix" clock for compatibility with already existing .dts lcdif nodes
>
> This mpu handling works for every i.MXRT SoC that we have, so let's
> generalize imxrt1050_region_config to imxrt_region_config.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
> i.MXRT1020 supports gpio5, so let's add a node for it.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang
> We don't need lcdif to be enable in SPL, so let's remove u-boot,dm-spl.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Di
> Let's enable imx-gpt-timer in imx1020-evk defconfig.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang De
> Lcdif needs both "pix" and "axi" clocks to be enabled so let's add them to
> lcdif node.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH,
> Enable gpt1 timer.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirc
> Enable gpt1 timer.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirc
> Add i.MX8QM qmx8 congatec board support
> U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200)
> CPU: NXP i.MX8QM RevB A53 at 1200 MHz
> Model: Congatec QMX8 Qseven series
> Board: conga-QMX8
> Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9
> Boot: SD2
> DRAM: 6 GiB
> MMC:
> Supported boot device types in iMX8MN: MMC, DHCP.
> Add DISTRO_DEFAULTS config option and include the distro boot command
> header file to enable full support of distro boot on i.MX8M Nano EVK (both
> DDR and LPDDR derivatives).
> Drop previous environment, which was targeting customized boot com
> At the moment a lot of u-boot,dm-spl properties are present in board .dts
> file but this is not correct since u-boot,dm-spl property is u-boot
> specific and must be listed into the separate imrt1050-evk-u-boot.dtsi
> file. So let's move every u-boot,dm-spl property present in
> imxrt1050-evk.dt
> Enable usbotg1 port node as host usb.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 M
> Board designed for quick prototyping and has one microSD port,
> 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
> UART interfaces, and 2 RGB LEDs.
> Signed-off-by: Oleh Kravchenko
> Cc: Stefano Babic
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> Usb is now supported so add all required nodes for it in imxrt1050.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Direct
> Let's enable imx-gpt-timer in imx1050-evk defconfig.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang De
> At the moment a lot of u-boot,dm-spl properties are present in board .dts
> file but this is not correct since u-boot,dm-spl property is u-boot
> specific and must be listed into the separate imrt1020-evk-u-boot.dtsi
> file. So let's move every u-boot,dm-spl property present in
> imxrt1020-evk.dt
> Add support for usb1 and usb2 present on i.IMXRT.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> Let's add node label to osc to be used as clock source for other nodes.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Di
> Now that usb host is supported let's enable it on this board.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wo
> Let's set gpt1 as u-boot timer.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich,
> Now device_type = "memory" is mandatory to allow u-boot to read memory
> node, so let's add it to memory node.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Soft
> The original URL that explains the boot mode setting is no longer
> valid.
> Update to the new one.
> Signed-off-by: Fabio Estevam
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Enginee
> Timer needs to be already enabled in spl, so let's add its node to spl dtb.
> Signed-off-by: Giulio Benetti
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managin
On 07.06.21 13:44, Jan Kiszka wrote:
> On 07.06.21 13:40, Tom Rini wrote:
>> On Mon, Jun 07, 2021 at 03:33:52PM +0530, Lokesh Vutla wrote:
>>> +Tom,
>>>
>>> Hi Tom,
>>>
>>> On 02/06/21 3:07 pm, Jan Kiszka wrote:
From: Jan Kiszka
To avoid the need of extra boot scripting on AM65x for
Hello, everyone
Em qua., 26 de mai. de 2021 às 09:35, João Marcos Costa <
jmcosta...@gmail.com> escreveu:
> Hello, Miquèl
>
> Em qua., 26 de mai. de 2021 às 04:52, Miquel Raynal <
> miquel.ray...@bootlin.com> escreveu:
>
>> Hi Joao,
>>
>> Joao Marcos Costa wrote on Mon, 17 May 2021
>> 18:20:38 -
Hi,
On 04/06/21 10:00 pm, Aswath Govindraju wrote:
> The following series of patches add support for the following
> - Kconfig symbol for giving the load address for ATF
> - USB Mass storage boot mode in AM642-EVM
> - DFU boot mode in AM642-EVM
> - Host and peripheral modes for AM642-EVM in U-Boot
On Tue, Jun 01, 2021 at 04:51:47PM +0530, Aswath Govindraju wrote:
> Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and
> CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/.h
> files and also in _defconfig files without a Kconfig option. It
> is easier for users to set these
On Wed, May 12, 2021 at 11:03:04AM +0300, Tero Kristo wrote:
> TFTP transfer size can be used to re-size the TFTP progress bar on
> single line based on the server reported file size. The support for
> this has been around from 2019, but it was never converted to proper
> Kconfig.
>
> While addin
On Wed, Jun 09, 2021 at 05:34:36PM +0800, nicholas_zh...@outlook.com wrote:
> From: weichangzheng
>
> This adds platform code and the device tree for the Phytium Pomelo Board.
> The initial support comprises the UART and the PCIE.
>
> Signed-off-by: weichangzheng
Running checkpatch.pl shows C
From: weichangzheng
This adds platform code and the device tree for the Phytium Pomelo Board.
The initial support comprises the UART and the PCIE.
Signed-off-by: weichangzheng
---
arch/arm/Kconfig | 8 ++
arch/arm/dts/Makefile| 1 +
arch/arm/dts/phytium-pomelo.d
dear Uboot:
I wonder how to perform code coverage statistics in uboot?
do anybody provide some experience
Add the DT nodes for the ICSSG0, ICSSG1 and ICSSG2 processor subsystems
that are present on the K3 AM65x SoCs. The three ICSSGs are identical
to each other for the most part, with the ICSSG2 supporting slightly
enhanced features for supporting SGMII PRU Ethernet. Each ICSSG instance
is represented
Enable PRUSS remoteproc driver for AM65
Signed-off-by: Lokesh Vutla
---
configs/am65x_evm_a53_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index 01e027f607..512849f983 100644
--- a/configs/am65x_evm_a53_defconfi
So far all the u-boot specific properties for both r5 and a53 are
placed in k3-am654-base-board-u-boot.dtsi. But there are few a53
nodes that should be updated but doesn't belong to r5. So create a
separate r5 specific u-boot dtsi.
Signed-off-by: Lokesh Vutla
---
arch/arm/dts/k3-am654-base-board
From: Keerthy
The K3 AM65x family of SoCs have the next generation of the PRU-ICSS
processor subsystem, commonly referred to as ICSSG. Each ICSSG processor
subsystem on AM65x SR1.0 contains two primary PRU cores and two new
auxiliary PRU cores called RTUs. The AM65x SR2.0 SoCs have a revised
ICSS
From: Keerthy
The Programmable Real-Time Unit - Industrial Communication
Subsystem (PRU-ICSS) is present of various TI SoCs such as
AM335x or AM437x or the AM654x family. Each SoC can have
one or more PRUSS instances that may or may not be identical.
The PRUSS consists of dual 32-bit RISC cores
This series adds support for remoteproc driver for PRUSS in AM65 SoCs.
Keerthy (2):
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs
Lokesh Vutla (3):
arm: dts: k3-am654-base-board: Add r5 specific u-boot dtsi
a
A few remaining fixes for this release ...
The following changes since commit e3b64beda5dd1a6b6bedfd1fe0e50be1ddea7044:
Prepare v2021.07-rc4 (2021-06-07 09:26:39 -0400)
are available in the Git repository at:
git://source.denx.de/u-boot-usb.git master
for you to fetch changes up to dcd2bb
Dear Tom,
The following changes since commit cb26d5a9265c60cee385d67eff86d115a606fbc5:
Merge https://source.denx.de/u-boot/custodians/u-boot-sh (2021-06-08
17:46:49 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-efi.git
tags/efi-2021-07-rc5
> -Original Message-
> From: Jaehoon Chung [mailto:jh80.ch...@samsung.com]
> Sent: 2021年6月9日 7:35
> To: Fabio Estevam
> Cc: Bough Chen ; Peng Fan ;
> u-boot@lists.denx.de; thar...@gateworks.com
> Subject: Re: [PATCH v2] Revert "mmc: fsl_esdhc_imx: use
> VENDORSPEC_FRC_SDCLK_ON to control c
Hi,
There is apparently a build failure with ARM socfpga board, the change
below fixes it and should be squashed to the original patch:
diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
index 650122fcd4..36eecdc057 100644
--- a/arch/arm/mach-socfpga/board.c
+++ b/arch/
Hi DENXlers,
I do not know if this is known, so it is better to tell this
explicitely. On source.denx.de (originally for U-Boot / Xenomai), we
have also a set of projects that we publish and we can reuse in several
customers' projects. They belong to the namespace "denx".
Marek has introduce
On Wed, 9 Jun 2021 at 07:25, Heinrich Schuchardt wrote:
>
> Brackets '[' need to be escaped to avoid a build warning
>
> lib/efi_loader/efi_image_loader.c:223:
> WARNING: Inline strong start-string without end-string.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> lib/efi_loader/efi_imag
On 08/06/2021 08.39, Lasse Klok Mikkelsen wrote:
> Address and size cells on SOC are set to 1. But gpio nodes are specified
> with 2 cells. This fixes the gpio nodes to correct cells.
>
> Signed-off-by: Lasse Klok Mikkelsen
Fixes: 2b3393cb3c (arm: dts: ls1021a: add gpio node)
Reviewed-by: Rasmus
1 - 100 of 106 matches
Mail list logo