Hi Pali,
On Thu, Jan 13, 2022 at 3:35 PM Tony Dinh wrote:
>
> Hi Pali,
>
> On Thu, Jan 13, 2022 at 5:28 AM Pali Rohár wrote:
> >
> > Kirkwood uses macros KW_DEFADR_PCI_MEM and KW_DEFADR_PCI_IO for base
> > address of PCIe mappings. Size of PCIe windows is not defined in any macro
> > yet, so
The last review by Alex was in 2019.
Signed-off-by: Heinrich Schuchardt
---
MAINTAINERS | 1 -
1 file changed, 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6ae81c5659..38c68ee87d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -737,7 +737,6 @@ F: test/dm/efi_media.c
EFI PAYLOAD
If variable dfu_alt_info is not defined duplicate messages are displayed.
=> efidebug boot dump
Scanning disk mmc2.blk...
Scanning disk mmc1.blk...
Scanning disk mmc0.blk...
Found 3 disks
No EFI system partition
"dfu_alt_info" env variable not defined!
Probably
The efidebug command was conceived for testing purposes.
The manipulation of boot options does better fit to the bootefi command
that is used to invoke the boot manager.
Signed-off-by: Heinrich Schuchardt
---
cmd/bootefi.c | 672 +-
cmd/efidebug.c
Hi Jan,
On Fri, 14 Jan 2022 at 06:40, Simon Glass wrote:
>
> Hi Jan,
>
> On Fri, 14 Jan 2022 at 02:40, Jan Kiszka wrote:
> >
> > Hi Simon,
> >
> > something is fishy with generator nodes: We are playing with replacing
> > fdts and configs in [1] with generator nodes, and that works so far -
> >
The size of the board file is limited to 520192 bytes. This conflicts with
the size requirement for the UEFI code.
Signed-off-by: Heinrich Schuchardt
---
configs/colibri_vf_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/colibri_vf_defconfig
The alignment of sections in the EFI binaries generated by U-Boot is
incorrect.
According to the PE-COFF specification [1] the minimum value for
FileAlignment is 512. If the value of SectionAlignment is
less then the page size, it must equal FileAlignment.
Let's set both values to 512 for the
Hi Fabio
On Fri, 2022-01-14 at 16:44 -0300, Fabio Estevam wrote:
> Hi Marcel,
>
> On Fri, Jan 14, 2022 at 3:10 PM Marcel Ziswiler
> wrote:
>
> > Strange, remember, I am working on Verdin iMX8M Mini support [1] and run
> > that stuff more or less daily.
> > However, as you can see in that
This is supposed to be a build-system flag. Move it there so we can
define it before linux/kconfig.h is included.
Signed-off-by: Simon Glass
---
(no changes since v1)
arch/arm/mach-imx/Makefile| 2 +-
arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg |
Use the new IF_ENABLED_INT() feature to avoid needing our own inline
function to handle this case. Tidy up the logic to ensure that the value
is only used when present. Update the 'expected' comment also.
Signed-off-by: Simon Glass
---
Changes in v3:
- Add new patch to update bloblist to use
At present if an optional Kconfig value needs to be used it must be
bracketed by #ifdef. For example, with this Kconfig setup:
config WIBBLE
bool "Support wibbles, the world needs more wibbles"
config WIBBLE_ADDR
hex "Address of the wibble"
depends on WIBBLE
then the
On Fri, Jan 14, 2022 at 1:36 PM Tom Rini wrote:
>
> On Wed, Dec 22, 2021 at 08:04:30AM -0600, Adam Ford wrote:
>
> > Some usb-nop-xceiv devices use a gpio to put them in and
> > out of reset. Add a reset function to put them into that
> > state. This is similar to how Linux handles the
> >
On Fri, Jan 14, 2022 at 01:07:34PM +0100, Michal Simek wrote:
> From: Ashok Reddy Soma
>
> Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
> commands. Compile cmd/mp.c based on CONFIG_CMD_MP.
>
> Signed-off-by: Ashok Reddy Soma
> Signed-off-by: Michal Simek
> ---
>
>
Hi Marcel,
On Fri, Jan 14, 2022 at 3:10 PM Marcel Ziswiler
wrote:
> Strange, remember, I am working on Verdin iMX8M Mini support [1] and run that
> stuff more or less daily.
> However, as you can see in that patch series, I build the imx-sdma driver now
> as a module just like already
>
On Wed, Dec 22, 2021 at 08:04:30AM -0600, Adam Ford wrote:
> Some usb-nop-xceiv devices use a gpio to put them in and
> out of reset. Add a reset function to put them into that
> state. This is similar to how Linux handles the
> usb-nop-xceiv driver.
>
> Signed-off-by: Adam Ford
>
> diff
On 16:14-20211215, Christian Gmeiner wrote:
> From: Michael Liebert
>
> Currently only the PADCFG registers of the main domain are unlocked.
> Also unlock PADCFG registers of MCU domain, so MCU pin muxing can be
> configured by u-boot or Linux.
>
> Signed-off-by: Michael Liebert
> Tested-by:
On Fri, Dec 03, 2021 at 03:18:53PM +, AJ Bagwell wrote:
> Changes to the am33xx device (33e9021a) trees have been merged in from
> the upstream linux kernel which now means the device tree uses the new
> pins format (as of 5.10) where the confinguration can be stores as a
> separate
On Fri, Dec 10, 2021 at 02:00:55PM +0800, Jamin Lin wrote:
> Add to support rsa 3072 bits algorithm in tools
> for image sign at host side and adds rsa 3072 bits
> verification in the image binary.
>
> Add test case in vboot for sha384 with rsa3072 algorithm testing.
>
> Signed-off-by: Jamin
Hi Fabio
On Fri, 2022-01-14 at 15:00 -0300, Fabio Estevam wrote:
> Hi,
>
> I am able to boot Linux 5.15.14 on an imx8mm-evk running U-Boot
> 2022.01 just fine.
>
> However, if I try to boot a 5.16 kernel, the boot fails in most of the
> attempts (like in 80% of the boots. It does boot
Hi,
I am able to boot Linux 5.15.14 on an imx8mm-evk running U-Boot
2022.01 just fine.
However, if I try to boot a 5.16 kernel, the boot fails in most of the
attempts (like in 80% of the boots. It does boot completely in some of
the attempts).
Starting kernel ...
(hangs here)
Using earlycon I
If image backend provides verify_header callback then call it after writing
image to disk. This ensures that written image is correct.
Signed-off-by: Pali Rohár
---
tools/mkimage.c | 41 +
1 file changed, 41 insertions(+)
diff --git a/tools/mkimage.c
On Fri, Jan 14, 2022 at 04:42:35PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following Marvell MVEBU related patches:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
Hi Rasmus,
On Tue, 26 Oct 2021 at 02:08, Rasmus Villemoes
wrote:
>
> On 26/10/2021 03.28, Simon Glass wrote:
> > Hi Rasmus,
> >
> > On Tue, 28 Sept 2021 at 02:57, Rasmus Villemoes
> > wrote:
> >>
> >> The build system already automatically looks for and includes an
> >> in-tree *-u-boot.dtsi
Hi Tom,
On Fri, 14 Jan 2022 at 08:41, Tom Rini wrote:
>
> On Fri, Jan 14, 2022 at 09:30:29AM +0100, Rasmus Villemoes wrote:
> > Ping
> >
> > On 21/11/2021 14.52, Rasmus Villemoes wrote:
> > > The build system already automatically looks for and includes an
> > > in-tree *-u-boot.dtsi when
Currently, if MTD NOR is enabled then U-Boot tries to issue flash
commands even when CFI flash DT node is not present. This causes
access fault on RISC-V emulators or ISS which do not emulate CFI
flash. To handle this issue, we implement is_flash_available() for
qemu-riscv board which will return
Enable support for HTIF console so that we can use QEMU RISC-V U-Boot
on RISC-V emulators and ISS having it.
Signed-off-by: Anup Patel
Reviewed-by: Philipp Tomsich
---
board/emulation/qemu-riscv/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/emulation/qemu-riscv/Kconfig
Quite a few RISC-V emulators and ISS (including Spike) have host
transfer interface (HTIF) based console. This patch adds HTIF
based console driver for RISC-V platforms which depends totally
on DT node for HTIF register base address.
Signed-off-by: Anup Patel
Reviewed-by: Philipp Tomsich
---
We can use same U-Boot binary compiled using qemu-riscv64_smode_defconfig
on QEMU virt machine and QEMU spike machine. To achieve this, we need HTIF
console support for U-Boot QEMU RISC-V board hence this series.
To test this series with latest OpenSBI, we can use the following command:
Hi Tom,
please pull the following Marvell MVEBU related patches:
- mvebu: Move PCIe code from serdes to PCIe driver (Pali)
- mtd: nand: pxa3xx: use marvell, prefix for custom DT properties (Pierre)
- Add PCIe support for Iomega
On 1/12/22 18:32, Pali Rohár wrote:
These hardcoded values were calculated from CONFIG_SPL_TEXT_BASE macro. Now
this macro is configurable via Kconfig, so calculate values 0x0030/0x4030
at compile time via CONFIG_SPL_TEXT_BASE option. Values 0x0030/0x4030
represents offset of
On Fri, Jan 14, 2022 at 09:30:29AM +0100, Rasmus Villemoes wrote:
> Ping
>
> On 21/11/2021 14.52, Rasmus Villemoes wrote:
> > The build system already automatically looks for and includes an
> > in-tree *-u-boot.dtsi when building the control .dtb. However, there
> > are some things that are
On 1/12/22 18:30, Pali Rohár wrote:
Memory layout in the comment is from Armada XP platform which uses load
address 0x40004030. DB-88f6720 is Armada 375 platform which uses same load
address as Armada 38x which is 0x4030.
Currently SPL support for Armada 375 is unfinished and does not work.
On 1/12/22 18:20, Pali Rohár wrote:
This patch series fixes generating images in kwbimage format, main fix
is setting correct load address of U-Boot SPL. Also it adds support for
generating kwbimage config file from existing kwbimage file via
dumpimage tool.
Changes in v2:
* Fix base address
On 1/12/22 17:06, Marek Behún wrote:
From: Marek Behún
This is a cleaned up and fixed version of a patch
mv_ddr: a380: fix SPLIT_OUT_MIX state decision
in each pattern cycle the bus state can be changed
in order to avoide it, need to back to the same bus state on each
pattern
On 1/4/22 16:14, Marek Behún wrote:
From: Marek Behún
I got an
: host mxlb.ispgateway.de[80.67.18.126] said:
554 Sorry, no mailbox here by that name. (in reply to RCPT TO command)
when sending e-mail to dirk.eib...@gdsys.cc.
Drop Dirk Eibach from MAINTAINERS of board/gdsys/a38x and
On 1/4/22 15:57, Marek Behún wrote:
From: Marek Behún
Before commit 4c289425752f ("mv_ddr: a38x: add support for ddr async
mode"), Asynchornous Mode was only used when the CPU Subsystem Clock
Options[4:0] field in the SAR1 register was set to value 0x13: CPU at
2 GHz and DDR at 933 MHz.
Then
On 1/2/22 05:57, Tony Dinh wrote:
The Iomega iConnect board has an internal mPCIe slot.
- Add PCIe support to enable the mPCIe slot to accept devices such as Wifi card
or mSATA.
- Add SYS_THUMB_BUILD to keep u-boot image size within 512K
- Add myself as maintainer. Luka no longer has this
On 12/25/21 05:46, Pierre Bourdon wrote:
The DT properties for the "enable-arbiter" and "keep-config" config
knobs were previously named inconsistently:
- The u-boot driver used "nand-enable-arbiter" and "nand-keep-config"
names, without Marvell prefixes.
- The Linux driver uses
On 12/21/21 12:20, Pali Rohár wrote:
This patch series removes gdsys's board_pex_config() function by
converting it to spl_board_init(), adds a new mvebu-reset driver for
enabling / disabling PCIe ports and finally moves PCIe code from serdes
driver to pci_mvebu.c driver.
After all these
Are there any problems with this patch ?
Thanks
Angus
On 2021-11-28 08:02, Angus Ainslie wrote:
With the fuse values in memory we can use some of the other u-boot
shell
conditonal operators to do tests.
Signed-off-by: Angus Ainslie
---
cmd/fuse.c | 27 +++
1 file
Are there any problems with this patch ?
Thanks
Angus
On 2021-11-28 08:02, Angus Ainslie wrote:
Compare a hexval to the fuse value and return pass or fail.
Signed-off-by: Angus Ainslie
---
cmd/fuse.c | 22 +-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git
Hello Tim,
On 25.02.21 02:21, Tim Harvey wrote:
> Greetings,
>
> I'm trying to convert the gwventana board support to DM_ETH and DM_USB
> and one item I have not resolved yet is USB Ethernet gadget support.
>
> For non-dm a call to 'usb_eth_initialize' creates a usb_ether gadget
> that can be
Hi Patrick
On 1/11/22 4:37 PM, Patrick Delaunay wrote:
> Solve compilation issue on undefined CONFIG_SYS_MMC_ENV_DEV when
> CONFIG_ENV_IS_IN_MMC is deactivated on STMicroelectronics boards
> defconfig
>
> Fixes: 9f97193616f1 ("board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when
> available")
>
Hi Heinrich
On 1/11/22 3:58 PM, Heinrich Schuchardt wrote:
> MAX_SEARCH_PARTITIONS is the highest possible partition number.
> Do not skip the last partition in board_get_alt_info_mmc().
>
> Signed-off-by: Heinrich Schuchardt
> ---
> board/st/common/stm32mp_dfu.c | 2 +-
> 1 file changed, 1
Hi Patrick
On 12/7/21 10:05 AM, Patrick Delaunay wrote:
> Default value for CONFIG_SYS_BOOTCOUNT_SINGLEWORD and
> CONFIG_SYS_BOOTCOUNT_ADDR are only needed when
> CONFIG_BOOTCOUNT_GENERIC is used.
>
> This patch avoids to define these configs when an other bootcount backend
> is activated, for
Hi Patrick
On 12/7/21 10:05 AM, Patrick Delaunay wrote:
> Today the bootcount is not managed by the Linux kernel for STM32MP15 as
> we don't have driver to update the used backup register in TAMP and the
> recovery command still executes the normal bootcmd with
> 'altbootcmd=run bootcmd'.
>
> So
在 2022/1/5 19:57, Gao Xiang 写道:
Hi Jianan,
On Wed, Aug 25, 2021 at 06:40:42PM -0400, Tom Rini wrote:
On Mon, Aug 23, 2021 at 08:36:43PM +0800, Huang Jianan wrote:
From: Huang Jianan
Add erofs filesystem support.
The code is adapted from erofs-utils in order to reduce maintenance
burden
Hi Dhananjay , Jagan,
On 2022-01-13 10:30, Dhananjay Phadke wrote:
On 1/13/2022 9:17 AM, Angus Ainslie wrote:
Add a JEDEC id for the Winbond W25Q16JV 16M-BIT serial flash memory
with
DUAL/QUAD SPI
Changes since v1:
Updated the name for more suffixes
Signed-off-by: Angus Ainslie
---
Hi Jan,
On Fri, 14 Jan 2022 at 02:40, Jan Kiszka wrote:
>
> Hi Simon,
>
> something is fishy with generator nodes: We are playing with replacing
> fdts and configs in [1] with generator nodes, and that works so far -
> until we want to read-back the image:
>
> $ binman ls -i flash.bin
> binman:
From: Marek Behún
Checkpatch warns about using uint32/16/8_t instead of u32/16/8.
Use the preferred types.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
arch/arm/mach-mvebu/spl.c | 34 +-
1 file changed, 17 insertions(+), 17 deletions(-)
diff
From: Marek Behún
Use the preferred
if (IS_ENABLED(X))
instead of
#ifdef X
where possible.
There are still places where this is not possible or is more complicated
to convert in this file. Leave those be for now.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
From: Marek Behún
Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
arch/arm/mach-mvebu/spl.c | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index
From: Marek Behún
Print the wrong srcaddr (spl_image->offset) in error message also for
SATA case.
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
arch/arm/mach-mvebu/spl.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/spl.c
Last 4 bytes of kwbimage boot image is checksum. Verify it via the new
spl_check_board_image() function which is called by U-Boot SPL after
loading kwbimage.
Signed-off-by: Pali Rohár
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
arch/arm/mach-mvebu/spl.c | 27
Add parameter spl_boot_device to spl_parse_board_header(), which allows
the implementations to see from which device we are booting and do
boot-device-specific checks of the image header.
Signed-off-by: Pali Rohár
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
Commit 9baab60b8054 ("SPL: Add support for parsing board / BootROM specific
image types") added support for loading board specific image types.
This commit adds support for a new weak function spl_parse_board_header()
which is called after loading boot image. Board may implement this function
for
There are certain restrictions for kwbimage offset and blocksize.
Validate them.
Signed-off-by: Pali Rohár
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
arch/arm/mach-mvebu/spl.c | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/mach-mvebu/spl.c
Each boot mode has its own kwbimage specified by blockid. So check that
kwbimage is valid by blockid.
Signed-off-by: Pali Rohár
Signed-off-by: Marek Behún
Reviewed-by: Stefan Roese
---
arch/arm/mach-mvebu/spl.c | 35 ++-
1 file changed, 26 insertions(+), 9
Hello Stefan,
this is v4 of series that adds more checks for kwbimage validity and
consistency to SPL, mainly checking image data checksum.
Patches now passed Github CI testing:
https://github.com/u-boot/u-boot/pull/106
Changes since v3:
- fix compile erros detected by CI (patch 2)
- print
Dear Tom,
In message <20220110184720.GB2773246@bill-the-cat> you wrote:
>
> It is release day and here is v2022.01. With this release
> we are now at the fourth of our 2 years past a number of DM migration
> deadlines. We're now at the point where conversion to CONFIG_DM itself
> must have
Add command "zynqmp pmufw node close" to disable permission to load
additional pmufw config overlays. This command will make sure that any
other sw will ask for changing permission.
Signed-off-by: Michal Simek
---
board/xilinx/zynqmp/cmds.c | 16
Power domain driver sends PM fragment to PMUFW. It is sent for every node
which is listed in DT. But some nodes could be already enabled but driver
is not capable to find it out. That's why it blinly sents request for every
listed IP. When PMUFW response by XST_PM_ALREADY_CONFIGURED error code
Power domain driver is using this function for every IP which is PD listed.
This can end up with a lot of messages which end up in boot log. That's why
show it only in EL3 as was used in past.
Signed-off-by: Michal Simek
---
drivers/firmware/firmware-zynqmp.c | 3 ++-
1 file changed, 2
Introduce zynqmp_pmufw_node() for loading PMU configuration fragment for
enabling IPs. Firmware driver has small overlay where NODE id is added and
config fragment is sent to PMUFW. There is a need to build PMUFW with
fragment support.
Signed-off-by: Michal Simek
---
Hi,
this small series is extending firmware interface for sending
pmufw configuration overlay with asking for access to certain
device. This infrastructure can be used via command or via power domain
driver.
Thanks,
Michal
Michal Simek (4):
xilinx: firmware: Introduce zynqmp_pmufw_node() for
Use the same coding style for all macros.
#defineNAMEVALUE
Signed-off-by: Michal Simek
---
include/zynqmp_firmware.h | 20 ++--
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h
index
This reverts commit eafdcda4a854932c0319656de7bf3f017f17ae67.
The main reason is that QEMU is using BOOTP protocol which is sending DHCP
Offer to a broadcast address that's why it can't be disabled.
DHCP protocol has no issue because it returns directly to client MAC
address.
Both of these
From: Ashok Reddy Soma
With commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory
location"), the function board_get_usable_ram_top() is allocating
MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this
much memory in case of mini U-Boot.
Keep these functions
From: Ashok Reddy Soma
Under struct lmb {} the lmb property's should be defined only if
CONFIG_LMB_MEMORY_REGIONS is defined.
Signed-off-by: Ashok Reddy Soma
Signed-off-by: Michal Simek
---
include/lmb.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/lmb.h
In case of mini U-Boot configurations there is no need to enable firmware
driver which just consume space for nothing. That's why add an option to
disable it.
Signed-off-by: Michal Simek
---
arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
From: Ashok Reddy Soma
For configurations with gmii2rgmii and external phy the DT nodes link
should be gem->gmii2rgmii->phy. But due to limitation in Linux driver
the DT is mentioned as gem->phy and gmii2rgmii->phy as shown in below DT.
ethernet@ff0c {
compatible =
From: Ashok Reddy Soma
Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
commands. Compile cmd/mp.c based on CONFIG_CMD_MP.
Signed-off-by: Ashok Reddy Soma
Signed-off-by: Michal Simek
---
cmd/Kconfig | 8
cmd/Makefile | 2 +-
2 files changed, 9 insertions(+), 1
From: Shravya Kumbham
Update dma name and add #dma-cells properties to fix dtbs_check
warnings.
Signed-off-by: Shravya Kumbham
Signed-off-by: Michal Simek
---
arch/arm/dts/zynqmp.dtsi | 48 ++--
1 file changed, 32 insertions(+), 16 deletions(-)
diff
From: Manish Narani
The DWC3 bindings require all USB node handles to be '^usb@[0-9a-f]+$'.
Update the same in ZynqMP device tree.
Signed-off-by: Manish Narani
Signed-off-by: Michal Simek
---
arch/arm/dts/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
Based on Linux kernel DT binding there should be different compatible
strings used that's why align zynqmp.dtsi with it.
Signed-off-by: Michal Simek
---
arch/arm/dts/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/zynqmp.dtsi
Add a driver for the NVMe storage controller integrated on
Apple SoCs. This NVMe controller isn't PCI based and deviates
from the NVMe standard in its implementation of the command
submission queue and the integration of an NVMMU that needs
to be managed. This commit tweaks the core NVMe code to
The NVMe storage controller integrated on Apple SoCs deviates
from the NVMe standard in two aspects. It uses a "linear"
submission queue and it integrates an NVMMU that needs to be
programmed for each NVMe command. Introduce driver ops such
that we can set up the linear submission queue and
Most Apple IOPs run a firmware that is based on what Apple calls
RTKit. RTKit implements a common mailbox protocol. This code
provides an implementation of the AP side of this protocol,
providing a function to initialize RTKit-based firmwares as well
as a function to do a clean shutdown of this
This mailbox driver provides a communication channel with the
Apple IOP controllers found on Apple SoCs. These IOP controllers
are used to implement various functions such as the System
Manegement Controller (SMC) and NVMe storage. It allows sending
and receiving a 96-bit message over a single
Apple SoCs have an integrated NVMe controller that isn't connected
over a PCIe bus. In preparation for adding support for this NVMe
controller, split out the PCI support into its own file. This file
is selected through a new CONFIG_NVME_PCI Kconfig option, so do
a wholesale replacement of
The power management controller found on Apple SoCs als provides
a way to reset all devices within a power domain. This is needed
to cleanly shutdown the NVMe controller before we hand over
control to the OS.
Signed-off-by: Mark Kettenis
---
arch/arm/Kconfig | 1 +
Add a boot target for NVMe such that we can boot from NVMe.
Signed-off-by: Mark Kettenis
---
include/configs/apple.h | 7 +++
1 file changed, 7 insertions(+)
diff --git a/include/configs/apple.h b/include/configs/apple.h
index 3e5fb495f1..47faad8150 100644
--- a/include/configs/apple.h
+++
Add a function to disable the NVMe controller. This will be used
to let the driver for the NVMe storage integrated on Apple SoCs
shutdown the NVMe controller such we can shutdown the NVMe
IOP controller in a clean way afterwards before handing control
to the OS.
Signed-off-by: Mark Kettenis
---
This adds support for the (rather quirky) NVMe storage controller
integrated on Apple SoCs. This makes it possible to boot from the
NVMe storage that is present on all the M1 machines that Apple has
released so far.
The series has been designed to have as little impact on the existing
NVMe
Hello! Could you please review this patch?
On Thursday 09 December 2021 11:06:39 Pali Rohár wrote:
> Calling 'nvme scan' followed by 'nvme detail' crashes U-Boot on Turris
> Omnia with the following error:
>
> undefined instruction
> pc : [<0a00>] lr : [<7ff80bfc>]
> reloc pc
Hi Heinrich,
On Tue, Jan 11, 2022 at 3:48 PM Heinrich Schuchardt
wrote:
>
> For GPT partition tables the 'part list' command stops at the first invalid
> partition number. But Ubuntu has images with partitions number
>
> 1, 12, 13, 14, 15
>
> In this case only partition 1 was listed by 'part
Hi Simon,
something is fishy with generator nodes: We are playing with replacing
fdts and configs in [1] with generator nodes, and that works so far -
until we want to read-back the image:
$ binman ls -i flash.bin
binman: Node '/fit@0x28': Generator node requires 'of-list' entry
On 14.01.22 00:28, Dhananjay Phadke wrote:
On 1/13/2022 4:38 AM, Jan Kiszka wrote:
On 25.11.21 20:03, Jan Kiszka wrote:
Another step to decouple the FIT image specification from the actual
signing: With these changes, the signature nodes can leave out an algo
property, mkimage will initialize
From: Jan Kiszka
The actual opt string is inlined - and different. Seems this was a
left-over from older versions of 603e26f76346.
Signed-off-by: Jan Kiszka
---
tools/mkimage.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/tools/mkimage.c b/tools/mkimage.c
index fbe883ce36..a4844d0f18
From: Jan Kiszka
This permits to prepare FIT image description that do not hard-code the
final choice of the signature algorithm, possibly requiring the user to
patch the sources.
When -o is specified, this information is used in favor of the
'algo' property in the signature node. Furthermore,
[resent as requested by Simon]
Another step to decouple the FIT image specification from the actual
signing: With these changes, the signature nodes can leave out an algo
property, mkimage will initialize that as well while signing. This way,
in-tree FIT source files can be prepared for gaining
From: Jan Kiszka
Modifications would be invalid.
Signed-off-by: Jan Kiszka
---
boot/image-fit-sig.c | 2 +-
boot/image-fit.c | 8
include/image.h | 2 +-
tools/image-host.c | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/boot/image-fit-sig.c
Ping
On 21/11/2021 14.52, Rasmus Villemoes wrote:
> The build system already automatically looks for and includes an
> in-tree *-u-boot.dtsi when building the control .dtb. However, there
> are some things that are awkward to maintain in such an in-tree file,
> most notably the metadata
93 matches
Mail list logo
