Hello,
On 5/15/2013 3:35 PM, Rajdeep Vaghasia wrote:
Hello,
I am trying to understand the flow of U-boot code, but unable to get the
complete link.
This question has been asked *innumerous* times in the list.
One sample from the archive
Hello Wolfgang Denk,
On 9/2/2012 9:30 PM, Wolfgang Denk wrote:
Dear Marek Vasut,
In message1344426150-1229-1-git-send-email-ma...@denx.de you wrote:
From: Marek Vasutmarek.va...@gmail.com
This patch contains UDM-design.txt, which is document containing
general description of the driver
Hello,
I'd like know about the progress of this proposal
http://elinux.org/Boot_U-Boot_from_UBI_volume
Someone is working on it currently?
Regards,
Vikram
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 9/12/2012 12:02 AM, Fabio Estevam wrote:
mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio
Add very basic support for it.
On 3/31/2013 2:38 AM, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
snip
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
new file mode 100644
index 000..cd974d8
--- /dev/null
+++
On 4/2/2013 3:45 AM, Fabio Estevam wrote:
On Mon, Apr 1, 2013 at 2:44 PM, Fabio Estevam feste...@gmail.com wrote:
On Mon, Apr 1, 2013 at 2:26 PM, Vikram Narayanan vikram...@gmail.com wrote:
Is the above same for all the variants of i.Mx?
Can we put this into a common header file?
Ok, I can
Add a GPIO driver for the BCM2835 Soc.
Refer Datasheet
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Also, add the driver to the raspberrypi's default config
Vikram Narayanan (2):
bcm: Add GPIO driver for BCM2835 SoC
rbpi: Add BCM2835 GPIO driver
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Stephen Warren swar...@wwwdotorg.org
Cc: Albert Aribaud albert.u.b...@aribaud.net
---
arch/arm/include/asm/arch-bcm2835/gpio.h | 49 +++
drivers/gpio/Makefile|1 +
drivers/gpio/rpi_gpio.c
Add the driver to the rpi_b's default config
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Stephen Warren swar...@wwwdotorg.org
Cc: Albert Aribaud albert.u.b...@aribaud.net
---
include/configs/rpi_b.h |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/include
Hello Stephen,
On 6/27/2012 7:09 AM, Stephen Warren wrote:
On 06/24/2012 11:21 AM, Vikram Narayanan wrote:
First off, it's great to see some patches for the chip. Thanks. Sorry
for being so nit-picky below; it's a tendency of mine...
Thanks for the detailed review. I'd make a v2
On 6/27/2012 11:36 PM, Stephen Warren wrote:
On 06/27/2012 11:32 AM, Vikram Narayanan wrote:
Hello Stephen,
On 6/27/2012 7:09 AM, Stephen Warren wrote:
On 06/24/2012 11:21 AM, Vikram Narayanan wrote:
First off, it's great to see some patches for the chip. Thanks. Sorry
for being so nit
Hello Stephen,
On 7/4/2012 7:37 AM, Stephen Warren wrote:
On 06/24/2012 11:19 AM, Vikram Narayanan wrote:
Add a GPIO driver for the BCM2835 Soc.
Refer Datasheet
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Also, add the driver to the raspberrypi's default
Add GPIO driver for BCM2835 Soc. Also add the driver to the raspberrypi default
config
Cc: Stephen Warren swar...@wwwdotorg.org
Cc: Albert Aribaud albert.u.b...@aribaud.net
Vikram Narayanan (2):
bcm: Add GPIO driver
rbpi: Add BCM2835 GPIO driver for raspberry pi
Changes from v1
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Stephen Warren swar...@wwwdotorg.org
Cc: Albert Aribaud albert.u.b...@aribaud.net
---
arch/arm/include/asm/arch-bcm2835/gpio.h | 71
Add the driver to the default config
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
include/configs/rpi_b.h |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index f547027..d4bbccc 100644
--- a/include/configs
Hello Stephen,
On 7/15/2012 10:53 PM, Stephen Warren wrote:
On 07/11/2012 02:37 PM, Vikram Narayanan wrote:
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h
b/arch/arm/include/asm/arch-bcm2835
On 7/31/2012 9:22 PM, Stephen Warren wrote:
On 07/31/2012 09:46 AM, Vikram Narayanan wrote:
On 7/15/2012 10:53 PM, Stephen Warren wrote:
On 07/11/2012 02:37 PM, Vikram Narayanan wrote:
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
diff --git
Also, add the driver to the raspberrypi default config
Cc: Stephen Warren swar...@wwwdotorg.org
Cc: Albert Aribaud albert.u.b...@aribaud.net
Vikram Narayanan (2):
gpio: bcm2835: Add GPIO driver
rbpi: Add BCM2835 GPIO driver for raspberry pi
Changes from v2:
Incorporate further comments
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
arch/arm/include/asm/arch-bcm2835/gpio.h | 71
drivers/gpio/Makefile|1 +
drivers/gpio
Add the driver to the default config
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
include/configs/rpi_b.h |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index f547027..d4bbccc 100644
--- a/include/configs
On 7/31/2012 11:18 PM, Vikram Narayanan wrote:
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
Signed-off-by: Vikram Narayananvikram...@gmail.com
---
arch/arm/include/asm/arch-bcm2835/gpio.h | 71
drivers/gpio/Makefile
Hello,
I'm seeing a fixable bit-flip in the current u-boot (v2012.10) on a
i.Mx6 Solo based custom board. The problem is similar to the one
explained here [1].
As observed by the thread's author, does reverting the commit 1b1f9a9
solves the issue? Did someone face a similar issue?
Thanks,
Ccing the Author of [1].
On 12/14/2012 11:33 PM, Vikram Narayanan wrote:
Hello,
I'm seeing a fixable bit-flip in the current u-boot (v2012.10) on a
i.Mx6 Solo based custom board. The problem is similar to the one
explained here [1].
As observed by the thread's author, does reverting
Hi,
On 12/17/2012 2:14 PM, Holger Brunck wrote:
Hi,
On 12/15/2012 04:14 AM, Vikram Narayanan wrote:
On 12/14/2012 11:33 PM, Vikram Narayanan wrote:
I'm seeing a fixable bit-flip in the current u-boot (v2012.10) on a
i.Mx6 Solo based custom board. The problem is similar to the one
explained
On 12/19/2012 4:58 PM, Luca Ceresoli wrote:
Hi all,
snip
On bricked devices the output of the ubi part nand0,3 command is:
Creating 1 MTD partitions on nand0:
0x0010-0x1000 : mtd=3
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI:
On 12/19/2012 11:52 PM, Stefan Roese wrote:
snip
I think its the right time to sync the UBI code with the current kernel
tree. But it seems like a huge work. Any suggestions?
Yes, syncing with the latest UBI/UBIFS code would be the best solution.
Even though a try with an increased malloc area
On 12/20/2012 12:17 AM, Vikram Narayanan wrote:
On 12/19/2012 11:52 PM, Stefan Roese wrote:
snip
I think its the right time to sync the UBI code with the current kernel
tree. But it seems like a huge work. Any suggestions?
Yes, syncing with the latest UBI/UBIFS code would be the best solution
bootstage_mark_name calls timer_get_boot_us which inturn calls
the arch timer. The arch timer uses the gd pointer to save the
lastinc count. A call to bootstage_mark_name here results in a
data abort as gd is uninitialized.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s
On 12/27/2012 3:52 PM, Albert ARIBAUD wrote:
On Thu, 27 Dec 2012 10:41:06 +0100, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Simon,
On Wed, 26 Dec 2012 12:39:32 -0800, Simon Glass s...@chromium.org
wrote:
Hi Vikram,
On Sun, Dec 23, 2012 at 3:27 AM, Vikram Narayanan vikram...@gmail.com
On 12/28/2012 7:29 PM, Tom Rini wrote:
On Fri, Dec 28, 2012 at 07:17:42AM -0500, Sergey Lapin wrote:
Hi, all!
As I failed to submit 250KB patch to the list
I will send this pull request
This patch is not for inclusion yet.
This patch is just update of u-boot MTD with
Linux kernel's MTD
On 1/27/2013 7:10 AM, Jagan Teki wrote:
This error occurred for all boards in the u-boot, I have used
arm-none-linux-gnueabi- xtool for versatilepb board.
I saw this issue specially from 2013.01 on-wards.
Can you check your host setup once?
Below is the output from my setup. I don't see any
Vikram Narayanan (4):
patman: Fix a typo error
patman: Add meaningful statements instead of blah blah
patman: Change the location of patman path in README
patman: Handle searching of patman config
tools/patman/README | 17 -
tools/patman/settings.py | 26
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index 587c97f..d9820ab 100644
--- a/tools/patman/README
+++ b/tools
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |9 -
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index d9820ab..d98f081 100644
--- a/tools/patman/README
+++ b
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index d98f081..4913510 100644
--- a/tools/patman/README
+++ b
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Also, it couldn't create patch files without the above config file.
Handle it in a sane way by creating a new one for the user.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools
This patchset fixes a few typo. And also addresses creation of patman
config file.
Changes from v1:
Improved the patch with comments from Simon Glass
Vikram Narayanan (4):
patman: Fix a typo error
patman: Add meaningful statements instead of blah blah
patman: Change the location of patman
Replace gti with git in README file
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index 587c97f..d9820ab 100644
Add example statements for commit message and series messages
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |9 -
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
Fix the location of patman path in README
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/patman/README b/tools/patman/README
index d98f081..4913510
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Handle it in a sane way by creating a new one for the user.
It looks for a user.name and user.email in the global .gitconfig
file, waits for the user input if it can't find those.
Signed-off-by: Vikram Narayanan vikram
Hello Wolfgang,
On 4/30/2012 1:14 PM, Wolfgang Denk wrote:
Dear Vikram Narayanan,
In message4f9acbb8.2040...@gmail.com you wrote:
Add example statements for commit message and series messages
Signed-off-by: Vikram Narayananvikram...@gmail.com
Cc: Simon Glasss...@chromium.org
---
tools
Hello Wolfgang,
On 4/30/2012 2:14 PM, Wolfgang Denk wrote:
Dear Vikram Simon,
In message4f9acbd1.1080...@gmail.com you wrote:
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Handle it in a sane way by creating a new one for the user.
It looks for a user.name and
On 4/30/2012 11:07 PM, Simon Glass wrote:
Hi Vikram,
On Fri, Apr 27, 2012 at 9:39 AM, Vikram Narayanan vikram...@gmail.com
mailto:vikram...@gmail.com wrote:
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Handle it in a sane way by creating a new one for the user
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Handle it in a sane way by creating a new one for the user.
It looks for a user.name and user.email in the global .gitconfig
file, waits for the user input if it can't find those.
Signed-off-by: Vikram Narayanan vikram
Update README and source file with the new location of config file
Cc: Simon Glass s...@chromium.org
Vikram Narayanan (2):
patman: Change the location of the config file
patman: Update README
tools/patman/README |5 -
tools/patman/settings.py |8
2 files changed
Move the config file from ~/.config/patman to ~/.patman
as it is more appropriate to have it there.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/settings.py |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git
Make changes in the README file with the new location of patman
config file. Also update the creation of config file.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
---
tools/patman/README |5 -
1 files changed, 4 insertions(+), 1 deletions
On 5/8/2012 11:40 PM, Vikram Narayanan wrote:
Update README and source file with the new location of config file
Please note that this patch depends on
patman: Handle creation of patman config patch, which is Acked but
not applied to the master yet.
Cc: Simon Glasss...@chromium.org
Vikram
Hello Wolfgang,
On 5/1/2012 10:37 AM, Simon Glass wrote:
On Mon, Apr 30, 2012 at 8:46 PM, Vikram Narayanan vikram...@gmail.com
mailto:vikram...@gmail.com wrote:
patman shouts when it couldn't find a $(HOME)/.config/patman file.
Handle it in a sane way by creating a new one for the user
Hello Simon,
On 5/8/2012 11:40 PM, Vikram Narayanan wrote:
Update README and source file with the new location of config file
Cc: Simon Glasss...@chromium.org
Vikram Narayanan (2):
patman: Change the location of the config file
patman: Update README
tools/patman/README |5
This fixes the location of patman config file from ~/.config/patman to
~/.patman. Also addresses the creation of new config file when it isn't
present.
Cc: Simon Glass s...@chromium.org
Cc: Wolfgang Denk w...@denx.de
Vikram Narayanan (2):
patman: Change the location of patman config file
Move the config file from ~/.config/patman to ~/.patman as it is
more appropriate to have it there. Update the same in the README.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Simon Glass s...@chromium.org
Cc: Wolfgang Denk w...@denx.de
---
tools/patman/README |2 +-
tools
patman shouts when it couldn't find a $(HOME)/.patman file.
Handle it in a sane way by creating a new one for the user.
It looks for a user.name and user.email in the global .gitconfig
file, waits for the user input if it can't find there. Update the
same in the README
Signed-off-by: Vikram
On 5/24/2012 10:58 AM, Amit Virdi wrote:
From: Vipin KUMARvipin.ku...@st.com
Flexible static memory controller is a peripheral provided by ST,
which controls the access to NAND chips along with many other
memory device chips eg NOR, SRAM.
This patch adds the driver support for FSMC controller
Hello Marek,
On 5/25/2012 7:44 PM, Marek Vasut wrote:
This patch conditionally defines flush_dcache_range() and
invalidate_dcache_range() on MPC8xxx, to avoid EHCI complaining,
resulting in the following output:
snip
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
Hello,
If I were to use NAND as a boot device on a custom i.Mx6 based hardware,
should I mention the IOMUX ALT settings in the DCD headers for the NAND
pins?
Thanks,
Vikram
___
U-Boot mailing list
U-Boot@lists.denx.de
This patchset cleanups up the gpio related stuff on imx boards.
Define a common header for gpio and remove the same struct
defines in all the include directories.
Vikram Narayanan (3):
imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h
tx25: Use generic gpio_* calls
imx: Define a common header
Move the macro to imx-regs.h so that the other mx25 boards can
make use of it.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
arch/arm/include/asm/arch-mx25/gpio.h |4
arch/arm/include/asm/arch-mx25/imx-regs.h |6 ++
2 files changed, 6 insertions(+), 4 deletions
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: John Rigby jcri...@gmail.com
Cc: Stefano Babic sba...@denx.de
---
board/karo/tx25/tx25.c | 28
1 files changed, 12
Remove redundant gpio_regs structure for every board and define a
common header for gpio_regs in the drivers/gpio directory. All the
board files needs to be changed to point to asm-generic/gpio.h
for gpio_* functions.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: John Rigby jcri
On 6/10/2012 6:31 PM, Vikram Narayanan wrote:
This patchset cleanups up the gpio related stuff on imx boards.
Define a common header for gpio and remove the same struct
defines in all the include directories.
As I don't have any mx25 based hardware, I've not tested it on any
boards. Any
Hi Fabio,
On 6/10/2012 8:08 PM, Fabio Estevam wrote:
On Sun, Jun 10, 2012 at 10:03 AM, Vikram Narayananvikram...@gmail.com wrote:
/* drop PHY power and assert reset (low) */
- val = readl(gpio4-gpio_dr) ~((1 7) | (1 9));
- writel(val,gpio4-gpio_dr);
- val =
On 6/10/2012 8:03 PM, Fabio Estevam wrote:
Hi Vikram,
On Sun, Jun 10, 2012 at 10:02 AM, Vikram Narayananvikram...@gmail.com wrote:
+
+/* Converts a GPIO port number and the internal bit position
+ * to the GPIO number
+ */
+#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) 5) + (bit
Hello Fabio,
On 6/10/2012 8:33 PM, Fabio Estevam wrote:
On Sun, Jun 10, 2012 at 10:02 AM, Vikram Narayananvikram...@gmail.com wrote:
Move the macro to imx-regs.h so that the other mx25 boards can
make use of it.
Signed-off-by: Vikram Narayananvikram...@gmail.com
---
If in case this is valid according to the latest datasheet, ignore this patch.
--
According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
bits 4 and 5 read-only and the value is always set as zero.
So write '0' to these bits instead of writing '1'.
Signed-off-by: Vikram Narayanan vikram
Changes from v1:
Used appropriate gpio_* lib calls.
---
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Fabio Estevam fabio.este...@freescale.com
Cc: John Rigby jcri...@gmail.com
Cc: Stefano Babic sba
Hello Wolfgang,
On 5/30/2012 11:04 AM, Simon Glass wrote:
On Wed, May 23, 2012 at 11:58 AM, Vikram Narayanan vikram...@gmail.com
mailto:vikram...@gmail.com wrote:
Move the config file from ~/.config/patman to ~/.patman as it is
more appropriate to have it there. Update the same
On 6/13/2012 1:22 PM, Stefano Babic wrote:
On 12/06/2012 18:37, Vikram Narayanan wrote:
Changes from v1:
Used appropriate gpio_* lib calls.
---
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Changelog must go after the --- line and commit message before
Hello Marek,
On 6/13/2012 5:57 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this
patch.
--
According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
bits 4 and 5 read-only and the value is always set as zero.
So write
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
I _really_ don't like ifdef -ing a lot of stuff. Instead I'd feel to
have a separate file in the directory which does this LCD init and FB
init call, and let the makefile handle the
Hello Marek,
On 6/13/2012 10:45 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
Hello Marek,
On 6/13/2012 5:57 PM, Marek Vasut wrote:
Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this
patch.
--
According to REV C manual, the register
On 6/13/2012 10:50 PM, Stefano Babic wrote:
On 13/06/2012 19:00, Vikram Narayanan wrote:
Hello,
mx53loco build fails when CONFIG_VIDEO and its friends disabled.
I can send a patch fixing this.
But CONFIG_VIDEO is *not* set in mx53loco.h mainline. Do you mean you
are testing Fabio's patches
Hi Stefano,
On 6/15/2012 8:25 PM, Stefano Babic wrote:
On 13/06/2012 13:37, Fabio Estevam wrote:
On Mon, Jun 11, 2012 at 12:02 PM, Vikram Narayananvikram...@gmail.com wrote:
Also, this macro is useful not only for mx25, and it would be nice to
let it avaible for the other i.MX SoCs as well.
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Acked-by: Stefano Babic sba...@denx.de
Cc: John Rigby jcri...@gmail.com
Cc: Fabio Estevam fabio.este...@freescale.com
---
Changes from v2:
Swap the place
Instead of manipulating gpio registers directly, use the calls
from the gpio library.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Acked-by: Stefano Babic sba...@denx.de
Cc: John Rigby jcri...@gmail.com
Cc: Fabio Estevam fabio.este...@freescale.com
---
Changes from v3:
Use gpio_set_value
The inclusion of LCD patch into mx51evk breaks the build when
CONFIG_VIDEO is disabled. Fix this by splitting the video related
stuff to a new file.
Also rename the function lcd_iomux to setup_iomux_lcd to make the
namings aligned with the other iomux functions.
Signed-off-by: Vikram Narayanan
The inclusion of LCD patch into mx51evk breaks the build when
CONFIG_VIDEO is disabled. Fix this by splitting the video
related stuff to a new file.
Also rename the function lcd_iomux to setup_iomux_lcd to make the
namings aligned with the other iomux functions.
Signed-off-by: Vikram Narayanan
Some cosmetic changes in the imx gpio driver.
Vikram Narayanan(4):
imx: Add GPIO_TO_PORT macro
imx: Use GPIO_TO_PORT macro instead of (gpio 5)
imx: Return gpio_set_value in gpio_direction_output
arch/arm/include/asm/arch-mx5/gpio.h |2 ++
arch/arm/include/asm/arch-mx6/gpio.h |2
imx: Return gpio_set_value in gpio_direction_output
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
drivers/gpio/mxc_gpio.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
100.0% drivers/gpio/
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index c4ef001
Sorry for the subject. It should have been [PATCH 0/3]
A small typo.
On 4/4/2012 9:33 PM, Vikram Narayanan wrote:
Some cosmetic changes in the imx gpio driver.
Vikram Narayanan(4):
imx: Add GPIO_TO_PORT macro
imx: Use GPIO_TO_PORT macro instead of (gpio 5)
imx: Return gpio_set_value
imx: Add GPIO_TO_PORT macro
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
arch/arm/include/asm/arch-mx5/gpio.h |2 ++
arch/arm/include/asm/arch-mx6/gpio.h |2 ++
2 files changed, 4 insertions(+), 0 deletions(-)
50.0% arch/arm/include/asm/arch-mx5/
50.0% arch/arm/include/asm
imx: Use GPIO_TO_PORT macro instead of (gpio 5)
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
drivers/gpio/mxc_gpio.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
100.0% drivers/gpio/
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index df6
Hello Dirk,
On 4/9/2012 11:03 AM, Dirk Behme wrote:
Dear Vikram ,
On 06.04.2012 10:56, Stefano Babic wrote:
On 04/04/2012 18:05, Vikram Narayanan wrote:
imx: Add GPIO_TO_PORT macro
Signed-off-by: Vikram Narayananvikram...@gmail.com
Hi,
---
arch/arm/include/asm/arch-mx5/gpio.h | 2
Hi,
On 4/6/2012 2:26 PM, Stefano Babic wrote:
On 04/04/2012 18:05, Vikram Narayanan wrote:
imx: Add GPIO_TO_PORT macro
Signed-off-by: Vikram Narayananvikram...@gmail.com
Hi,
---
arch/arm/include/asm/arch-mx5/gpio.h |2 ++
arch/arm/include/asm/arch-mx6/gpio.h |2 ++
2 files
Hi Stefano,
On 4/10/2012 4:01 AM, stefano babic wrote:
Am 09/04/2012 18:09, schrieb Vikram Narayanan:
Hi,
Hi,
Yes. You are right.
So, instead of defining all the headers this way,
#if defined(CONFIG_MX53) || defined(CONFIG_MX51)
#includeasm/arch/mx5x_pins.h
#elif defined(CONFIG_MX6
arch/arm/include/asm/arch-mx35/mx35_pins.h |2 --
arch/arm/include/asm/arch-mx5/mx5x_pins.h |2 --
arch/arm/include/asm/arch-mx6/imx-regs.h |2 --
drivers/gpio/mxc_gpio.c| 12 ++--
4 files changed, 6 insertions(+), 12 deletions(-)
Changed from v1:
Remove gpio related unused/repititive definitions from imx headers.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
arch/arm/include/asm/arch-mx35/mx35_pins.h |2 --
arch/arm/include/asm/arch-mx5/mx5x_pins.h |2 --
arch/arm/include/asm/arch-mx6/imx-regs.h |2 --
3 files
Add GPIO_TO_PORT macro in the mxc_gpio.c driver
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
drivers/gpio/mxc_gpio.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index df6..7e65b39 100644
--- a/drivers
Use the defined GPIO_TO_PORT macro. Remove gpio 5 references.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
drivers/gpio/mxc_gpio.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 7e65b39..21b1cdc
Return gpio_set_value in gpio_direction_output.
Earlier it returned 0 and ignored gpio_set_value's return value.
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
drivers/gpio/mxc_gpio.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/mxc_gpio.c b
On Fri, Sep 21, 2012 at 1:07 AM, Pavel Herrmann morpheus.i...@gmail.com wrote:
This core will register all block devices (disk, cards, partitons) and provide
unfied access to them, instead of current method with device + partition
offset
Signed-off-by: Pavel Herrmann morpheus.i...@gmail.com
On 9/22/2012 8:09 AM, Troy Kisky wrote:
The plugin command of mkimage can take this
file as an argument.
An explanation of what is plugin and what the file plugin.S does
should be better. Not in the subject of the patch, you can place it as a
README.
Signed-off-by: Troy
On 9/22/2012 8:09 AM, Troy Kisky wrote:
Only the values used in the sabrelite board are
added currently. Add more as other boards use them.
Though there are no users, better add it for completeness. This should
also avoid people patching this file often.
Signed-off-by: Troy
On 9/22/2012 8:09 AM, Troy Kisky wrote:
Signed-off-by: Troy Kiskytroy.ki...@boundarydevices.com
---
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 231 ++---
board/freescale/mx6qsabrelite/pads.h | 172 ++
2 files changed, 226 insertions(+), 177
On 9/23/2012 5:33 PM, Eric BĂ©nard wrote:
this board is based on an i.MX25 from Freescale.
It consists of a SOM containing :
- NAND flash (internal or external boot supported and tested)
- mDDR (64MB tested)
- ethernet PHY connected in RMII mode (tested)
and a baseboard containing :
- a serial
As dummy{1,2} are not used anywhere, mark it with __maybe_unused
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Stefan Roese s...@denx.de
---
common/spl/spl.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 0d829c0
Cleanups for SPL/socfpga.
Cc: Dinh Nguyen dingu...@altera.com
Vikram Narayanan (2):
arm/socfpga: Remove timer_init from spl_board_init
socfpga/spl: Remove malloc.h
arch/arm/cpu/armv7/socfpga/spl.c |4
1 files changed, 0 insertions(+), 4 deletions(-)
--
1.7.4.1
Timer is initialized already in board_init_r function in
(common/spl/spl.c) No need to initialize it again
Signed-off-by: Vikram Narayanan vikram...@gmail.com
Cc: Dinh Nguyen dingu...@altera.com
---
arch/arm/cpu/armv7/socfpga/spl.c |3 ---
1 files changed, 0 insertions(+), 3 deletions
Remove unused header
Signed-off-by: Vikram Narayanan vikram...@gmail.com
---
arch/arm/cpu/armv7/socfpga/spl.c |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
index 23053fd..84216eb 100644
--- a/arch/arm
1 - 100 of 121 matches
Mail list logo