Hi Alan, did you find and answer to the problem?
I'm interesetd to share the work
Thanks
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com
Hi all,
is any of you to collaborate forinvestigation about bootung linux with u-boot
on leon3-altera-e2pS60-sdr board?
Waiting for a response I wish you all the best
Regards
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax
On Saturday 12 February 2011 08:13:08 Albert ARIBAUD wrote:
Hi Fabio,
Le 11/02/2011 14:45, Fabio Giovagnini a écrit :
Hi guys, I'd like to add the configuration for leon3-altera-ep2s60-sdr
board. What could be the best working way to have an automatic patch
generator?
Make one, I
Where could I find stg? and its documentation?
Thanks
On Saturday 12 February 2011 10:33:05 Graeme Russ wrote:
On 12/02/11 20:23, Fabio Giovagnini wrote:
On Saturday 12 February 2011 08:13:08 Albert ARIBAUD wrote:
Hi Fabio,
Le 11/02/2011 14:45, Fabio Giovagnini a écrit :
Hi guys, I'd
Hi guys, I'd like to add the configuration for leon3-altera-ep2s60-sdr board.
What could be the best working way to have an automatic patch generator?
Thanks
Fabio Giovagnini
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman
Hi All,
We have built u-boot (from git as suggested by U-Boot SPARC / LEON Port v
1.0.0 April 2009.
The building is successfull.
I configured for execution in ram (CONFIG_SYS_TEXT_BASE = 0x4000) and
the system runs.
But nothing I see on the serial console connected to minicom.
When I do Crtl+C
Hi all,
where could I find informations about to configure u-boot for altera ep2s60-sdr
board?
I saw that there is a board gr_ep2s60 but I suppose it is for altera ep2s60-
ddr.
Any suggestion will be appreciated.
Regards
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype
H All,
why this double definitions?
Aren't they the same thing?
Thanks
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com
Thanks
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de
256 /* Buffer size for input from the
Console
*/
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com
___
U-Boot mailing
Is there please an IRC channel for real time chat about problem with uboot?
Regards
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com
image found
Image Name: Linux-2.6.37+
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size:975877 Bytes = 953 KiB
Load Address: 0c001000
Entry Point: 0c002000
Verifying Checksum ... OK
=
Any ideas about why the kernelò do not send out anything?
--
Ing. Fabio
Kumar suggestied
#u-boot on freenode
Cheers
On Monday 17 January 2011 20:43:47 Albert ARIBAUD wrote:
Hi Fabio,
Le 17/01/2011 14:38, Fabio Giovagnini a écrit :
Is there please an IRC channel for real time chat about problem with
uboot?
Not that I know of.
Regards
Amicalement
work.
There could be 2 reasons
1) address problem
bootargs problem, but my kernel is built using BOOTCMD_OVERWRITE option.
Any ideas?
Thanks
On Monday 17 January 2011 19:24:14 Fabio Giovagnini wrote:
Ok, rigth.
I'mm newbe of u-bbot and I'd loke to contribute.
What could be the usefull info
Hi all,
for sending a patch do I need to have on my PC two u-bbot tree, one original
obtaned by git command, and another to make the modifications?
Or can I produce the patches using the original tree resident on git server?
Thanks
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
and sorry again
In data martedì 20 luglio 2010 09:00:39, Vipin KUMAR ha scritto:
: On 7/20/2010 12:25 PM, Fabio Giovagnini wrote:
Hi all,
for sending a patch do I need to have on my PC two u-bbot tree, one
original obtaned by git command, and another to make the modifications?
Or can I
this patch is for test
6. git format-patch -1
then you will got a 0001-***.patch file.
On 07/20/2010 03:39 PM, Fabio Giovagnini wrote:
Hi Vipin,
I'm not so smart in diff / patch and git tools usage.
Could be so kind to write to me how to build a patch for just one file I
have
.
2010/7/14 Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
Hi nobuhiro san.
Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203
the file
lowlevel_init.S
defines
PDCRL4_A
but do not ise it.
So if the port are not set as Data bus, how
think my setting is not correct. Is it?
Thanks a lot and best regards
In data lunedì 19 luglio 2010 09:52:23, Stefan Roese ha scritto:
: Hi Fabio,
On Thursday 15 July 2010 11:55:17 Fabio Giovagnini wrote:
In my experience the SST39VF6402B has become full compliant with CFI mtd
interface
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
www.aurion-tech.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
),
}
},
#endif
Best regards and thanks a lot
In data lunedì 19 luglio 2010 12:26:32, Fabio Giovagnini ha scritto:
: I supposed the list doesn't like the attachment.
Anyway I understand, now.
I'll make you know how I'll solve.
Thanks a lot and best regards
In data lunedì 19
Ok
Cheers
In data lunedì 19 luglio 2010 16:19:23, Stefan Roese ha scritto:
: On Monday 19 July 2010 15:57:09 Fabio Giovagnini wrote:
This is the rigth config for such a FLASH chip
#ifdef CONFIG_SYS_FLASH_LEGACY_4Mx16
{
.mfr_id = (u16)SST_MANUFACT
There somewhere in the linux-sh galaxy something like that
http://www.stlinux.com/u-boot/target-install?
Thanks a lot
In data venerdì 16 luglio 2010 08:31:55, Nobuhiro Iwamatsu ha scritto:
: Hi, Fabio.
2010/7/14 Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
Hi nobuhiro san
:
: Ciao Fabio,
On 7/15/2010 1:45 PM, Fabio Giovagnini wrote:
I had a similar problem with sh2a 7203 based board and gcc version 4.4.1
(Sourcery G++ Lite 4.4-206)
Verify if the undefined symbols are of libgcc.
They must be, because I can compile the source without
USE_PRIVATE_LIBGCC=yes
, I was just avoiding it thinking that maybe someone somewhere would
have already done that. May be that patch can also be sent to the
community
Feel free to go on - we're looking forward to seeing your patch.
Best regards,
Wolfgang Denk
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F
using on their own board such a flash?
Thanks a lot
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
www.aurion-tech.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http
of Nobuhiro Iwamatsu. Do you have?
In data martedì 13 luglio 2010 22:43:57, Guennadi Liakhovetski ha scritto:
: On Tue, 13 Jul 2010, Fabio Giovagnini wrote:
Good morning,
if any of you is involved in such a develop, I'd like to have discussion
if possible about u-boot onto sh architecture
You're
Liakhovetski ha scritto:
: On Wed, 14 Jul 2010, Fabio Giovagnini wrote:
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR
flash; much SDRAM;
2) To know better the structure I'd like to run from NOR
Liakhovetski ha scritto:
: On Wed, 14 Jul 2010, Fabio Giovagnini wrote:
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR
flash; much SDRAM;
2) To know better the structure I'd like to run from NOR
Hi nobuhiro san.
Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203
the file
lowlevel_init.S
defines
PDCRL4_A
but do not ise it.
So if the port are not set as Data bus, how the sysstem can boot?
Thanks a in advance
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F
Hi Nobuhiro san,
I see STBCR registers but never used.
Where are the modules set out from thye stand by?
Regards
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
www.aurion-tech.com
Good morning,
if any of you is involved in such a develop, I'd like to have discussion if
possible about u-boot onto sh architecture
Thanks in advance
Best regards
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
Hi all,
I'm using the Code Surcery compiler sh7203-uclinux-4.4-206
To make it workable on u-boot I need to make some work around
What it the step by step procedure to send you an appliable patch?
Thanks in advance
Cheers
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype
Thanks!!!
THis is exacty what I was looking for
In data venerdì 09 luglio 2010 16:05:11, Anatolij Gustschin ha scritto:
: Hi,
On Fri, 9 Jul 2010 15:57:46 +0200
Fabio Giovagnini fabio.giovagn...@aurion-tech.com wrote:
Hi all,
I'm using the Code Surcery compiler sh7203-uclinux-4.4-206
Hi all, I supposed that in u-boot.lds I had found:
ROM section , RAM section and so on.
Istead I found reloct_dst and all the section a sequence starting form this
offset.
Why this?
Thanks
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
I'd like to make u-boot running on my sh2a 7203 based board, so I'd like to
staret from rsk+ status
Thanks a lot in advance
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
www.aurion-tech.com
to
kernel.
In rootpath I should read someting?
Could the problem be my PC is little endian and I' exporting to a big endian
CPU?
Thanks in advance.
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
Thanks alot.
The very first problem was a permission problem, as you suggestied to ckech.
But now I think a Have a problem of irq losing form eth.
Thanks again
In data giovedì 18 marzo 2010 09:04:22, Wolfgang Denk ha scritto:
: Dear Fabio Giovagnini,
you are indeed completely off topic here
Thanks very much.
Alle 09:10, lunedì 8 febbraio 2010, Nobuhiro Iwamatsu ha scritto:
Hi,
2010/2/6 Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
Hi All,
I can compile u-boot for rsk7203_config.
But into the file board/renesas/rsk7203/config.mk
TEXT_BASE = 0x0C7C
and if I
Thank a lot.
Do I have to use
--change-start
or
--change-section-address
Thanks
Alle 09:10, lunedì 8 febbraio 2010, Nobuhiro Iwamatsu ha scritto:
Hi,
2010/2/6 Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
Hi All,
I can compile u-boot for rsk7203_config.
But into the file board
the bootloader?
Thanks in advance.
--
Fabio Giovagnini
Aurion s.r.l.
CF e P.IVA 00885711200
Tel. +39.051.594.78.24
Cell. +39.335.8350919
www.aurion-tech.com
account telefono VoIP skype (www.skype.com):
aurion.giovagnini
___
U-Boot mailing list
U-Boot
scritto:
Dear Fabio Giovagnini,
In message 201002061124.41572.fabio.giovagn...@aurion-tech.com you wrote:
I can compile u-boot for rsk7203_config.
But into the file board/renesas/rsk7203/config.mk
TEXT_BASE = 0x0C7C
and if I read u-boot.srec that is the result of building process I
I'm new of the list.
I'd like to build u-Boot for rsk+ 7203
because I designed and produced a board sh2a 7203 based.
I'm in trouble with some errors; where can I start to study more?
Thanks a lot in advange
--
Fabio Giovagnini
Aurion s.r.l.
CF e P.IVA 00885711200
Tel. +39.051.594.78.24
Cell
Ok, thanks
Have a nice day
Alle 20:40, venerdì 5 febbraio 2010, Dennis Semakin ha scritto:
Hi
Maybe you should read README file from u-boot source code tree.
05.02.10, 17:40, Fabio Giovagnini fabio.giovagn...@aurion-tech.com:
I'm new of the list.
I'd like to build u-Boot for rsk+ 7203
44 matches
Mail list logo