ary workaround after commit 7b78d6438a2b3
("efi_loader: Reserve unaccessible memory") to avoid warnings.
And it is working because in the default memory mapping
OP-TEE base address == RAM_TOP and the rest of memory is
used by OP-TEE tagged "no map" (protected by firewall)
fnode_path("/reserved-memory/optee");
if (!ofnode_valid(node))
- return 0;
+ return -ENOENT;
fdt_start = ofnode_get_addr_size(node, "reg", &fdt_mem_size);
*start = fdt_start;
Reviewed-by: Patrick Delaunay
Thanks
Patrick
t uint32_t dram_size = stm32mp_get_dram_size();
const uintptr_t dram_top = STM32_DDR_BASE + (dram_size - 1);
- uint32_t optee_base, optee_size, tee_shmem_base;
+ u32 optee_base = 0, optee_size = 0, tee_shmem_base;
const uintptr_t tzc = STM32_TZC_BASE;
int ret;
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ging
BRANCH_ADDRESS
=> the STM32MP15 ROM check that only the secure world can update
the TAMP_BKP5R = BRANCH_ADDRESS
before to start the CPU2 and jump to this address.
Sorry to inconvenient, we will improve this part on next release
= OpenSTLinux V5.1
Reviewed-by: Patrick De
: Patrick Delaunay
Thanks
Patrick
le = "gpio-leds"; which is not present in kernel DT.
Signed-off-by: Patrice Chotard
---
arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi | 8
1 file changed, 4 insertions(+), 4 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
state" property from red led node.
This will avoid to trigger the led driver probe() to configure the led
default state during startup.
Signed-off-by: Patrice Chotard
---
arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi | 1 -
1 file changed, 1 deletion(-)
Reviewed-by: Patrick Delauna
-scmi-u-boot.dtsi | 19 +--
1 file changed, 17 insertions(+), 2 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
: Patrick Delaunay
Thanks
Patrick
le = "gpio-leds" which is not present in kernel DT.
Signed-off-by: Patrice Chotard
---
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 8
1 file changed, 4 insertions(+), 4 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
state" property from red led node.
This will avoid to trigger the led driver probe() to configure the led
default state during startup.
Signed-off-by: Patrice Chotard
---
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 1 -
1 file changed, 1 deletion(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
-boot.dtsi | 19 +--
1 file changed, 17 insertions(+), 2 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
-
1 file changed, 5 insertions(+), 1 deletion(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ned-off-by: Patrice Chotard
---
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
status = "okay";
};
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ions(+), 2 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
@@ -36,6 +36,10 @@
};
led {
+ led-blue {
+ /delete-property/label;
+ };
+
led-red {
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ot;error";
+ led-red {
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
- status = "okay";
};
};
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ot;User-2";
+ linux,code = ;
+ gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
};
led {
Reviewed-by: Patrick Delaunay
Thanks
Patrick
l = "error";
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
status = "okay";
};
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
= <&gpioa 13 GPIO_ACTIVE_LOW>;
};
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
-dk-u-boot.dtsi | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
h/arm/dts/stm32mp135f-dk-u-boot.dtsi | 13 +
1 file changed, 13 insertions(+)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
changed, 40 insertions(+), 28 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
=y
CONFIG_USB_FUNCTION_FASTBOOT=y
Reviewed-by: Patrick Delaunay
Thanks
Patrick
CLK_SCMI=y
CONFIG_SET_DFU_ALT_INFO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ALT_INFO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC000
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ALT_INFO=y
CONFIG_USB_FUNCTION_FASTBOOT=y
Reviewed-by: Patrick Delaunay
Thanks
Patrick
Hi,
On 4/9/24 17:01, Patrice Chotard wrote:
Enable FASTBOOT relative flags for stm32mp13_defconfig.
Signed-off-by: Patrice Chotard
---
configs/stm32mp13_defconfig | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
idx, data ? ctx.data_length : 0, data);
ret = stm32_sdmmc2_end_cmd(dev, cmd, &ctx);
Reviewed-by: Patrick Delaunay
Thanks
Patrick
Hi,
On 3/8/24 15:26, Patrice Chotard wrote:
From: Patrick Delaunay
Add compatible used for STM32MP25 family.
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrice Chotard
---
drivers/mmc/stm32_sdmmc2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/stm32_sdmmc2.c b
partition@1f {
label = "env2";
reg = <0x001F 0x0001>;
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
partition@1f {
label = "env2";
reg = <0x001F 0x0001>;
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
0 {
label = "UBI";
reg = <0x00a0 0x3f60>;
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
t;ram_base, gd->ram_top - gd->ram_base,
+ EFI_CONVENTIONAL_MEMORY);
+}
Reviewed-by: Patrick Delaunay
Thanks
Patrick
This patch avoids compilation issue when CONFIG_USB_GADGET is deactivated
in defconfig, with undefined reference to run_usb_dnl_gadget and to
g_dnl_set_product.
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a
if /* __ASSEMBLY__ */
#endif /* CONFIG_STM32MP15X || CONFIG_STM32MP13X */
-#if CONFIG_STM32MP25X
+#ifdef CONFIG_STM32MP25X
#define STM32_RCC_BASE0x4420
#define STM32_TAMP_BASE 0x46010000
Reviewed-by: Patrick Delaunay
Thanks
Patrick
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass
---
See Simon's patch in serie "Clean up of bad Kconfig options" never merged
https://patchwork.ozlabs.org/project/uboot/list/?series=339004&state=*
https://patchwork.ozlabs.org/
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass
Signed-off-by: Patrick Delaunay
---
See Simon's patch in serie "Clean up of bad Kconfig options" never merged
https://patchwork.ozlabs.org/project/uboot/list
Add the display of the STMicroelectronics board identification saved in OTP
in stm32mp2 checkboard function.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
board/st/stm32mp2/stm32mp2.c | 23 +++
1 file changed, 23 insertions
Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed-off-by: Patrick Delaunay
---
Changes in v2:
- fix CONFIG name with 'x': TARGET_ST_
Implement the weak function checkboard to identify the used board with
compatible in device tree for the support of stm32mp2 STMicroelectronics
boards.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
board/st/stm32mp2/stm32mp2.c | 14 ++
1
From: Patrice Chotard
Add support of serial number for stm32mp25, gets from OTP with BSEC driver.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
.../arm/mach-stm32mp/include/mach/sys_proto.h | 1 +
arch/arm/mach
rd
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
arch/arm/mach-stm32mp/soc.c | 70
arch/arm/mach-stm32mp/stm32mp1/cpu.c | 58 +--
arch/arm/mach-stm32mp/stm32mp2/cpu.c | 1 +
3 files changed, 72 insertions(+), 57 deletions(-)
Change OTP number to 364 for STM32MP25 as it is done in bsec driver.
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog
Add a new file soc.c for common functions between stm32mp1 and stm32mp2
family and move print_cpuinfo() in this new file.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
arch/arm/mach-stm32mp/Makefile | 1 +
arch/arm/mach-stm32mp/soc.c
Add support of the command fuse with CONFIG_CMD_FUSE to allow access
on OTP with command line.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
configs/stm32mp25_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/stm32mp25_defconfig b
- MAC address: OTP247 and after
Changes in v2:
- fix CONFIG name with 'x': TARGET_ST_STM32MP15x TARGET_ST_STM32MP13x
- add "arm: Rename STM32MP13x"
- add "arm: Rename STM32MP15x"
Patrice Chotard (1):
stm32mp: add setup_serial_number for stm32mp25
Patrick Delaun
Add support of BSEC for STM32MP25x family to access OTP.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
arch/arm/mach-stm32mp/bsec.c | 7 +++
arch/arm/mach-stm32mp/include/mach/stm32.h | 3 ++-
2 files changed, 9 insertions(+), 1
Add driver data in BSEC driver to test presence of OP-TEE TA,
mandatory for STM32MP13 family and prepare the support of new device
with more OTP than 95.
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
arch/arm/mach-stm32mp/bsec.c | 38
From: Yann Gautier
Add chip revision B support for STM32MP25, for displaying it in trace.
Reviewed-by: Patrice Chotard
Signed-off-by: Yann Gautier
Signed-off-by: Patrick Delaunay
---
(no changes since v1)
arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c | 3 +++
1 file changed, 3 insertions
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Reviewed-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
Signed-off-by: Alexandre Torgue
---
(no changes since v1)
arch
Hi,
On 1/15/24 14:03, Patrice CHOTARD wrote:
On 1/15/24 13:46, Patrick Delaunay wrote:
Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed
We cannot use stm32key commands without CONFIG_CMDLINE so add the
required condition.
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 5fc92d07fe6d
Add the display of the STMicroelectronics board identification saved in OTP
in stm32mp2 checkboard function.
Signed-off-by: Patrick Delaunay
---
board/st/stm32mp2/stm32mp2.c | 23 +++
1 file changed, 23 insertions(+)
diff --git a/board/st/stm32mp2/stm32mp2.c b/board/st
Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/include/mach/stm32.h | 1 +
board/st
Implement the weak function checkboard to identify the used board with
compatible in device tree for the support of stm32mp2 STMicroelectronics
boards.
Signed-off-by: Patrick Delaunay
---
board/st/stm32mp2/stm32mp2.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/board/st
ethaddr, is a invalid
value used for unused MAC address slot in OTP, for example for board
with STM32MP25x part number allows up to 5 ethernet ports but it is not
supported by the hardware, without switch; the associated variable
"enetaddr%d" is not created.
Signed-off-by: Patric
From: Patrice Chotard
Add support of serial number for stm32mp25, gets from OTP with BSEC driver.
Signed-off-by: Patrice Chotard
Signed-off-by: Patrick Delaunay
---
.../arm/mach-stm32mp/include/mach/sys_proto.h | 1 +
arch/arm/mach-stm32mp/soc.c | 31
Change OTP number to 364 for STM32MP25 as it is done in bsec driver.
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
b/arch/arm
Add a new file soc.c for common functions between stm32mp1 and stm32mp2
family and move print_cpuinfo() in this new file.
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/Makefile | 1 +
arch/arm/mach-stm32mp/soc.c | 17 +
arch/arm/mach-stm32mp/stm32mp1
Add support of the command fuse with CONFIG_CMD_FUSE to allow access
on OTP with command line.
Signed-off-by: Patrick Delaunay
---
configs/stm32mp25_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/stm32mp25_defconfig b/configs/stm32mp25_defconfig
index 75f27c98b441
Add support of BSEC for STM32MP25x family to access OTP.
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/bsec.c | 7 +++
arch/arm/mach-stm32mp/include/mach/stm32.h | 3 ++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-stm32mp/bsec.c b
- MAC address: OTP247 and after
Patrice Chotard (1):
stm32mp: add setup_serial_number for stm32mp25
Patrick Delaunay (10):
arm64: dts: st: add bsec support to stm32mp25
stm32mp: bsec: add driver data
stm32mp: bsec: add support of stm32mp25
configs: stm32mp25: add support of fuse
Add driver data in BSEC driver to test presence of OP-TEE TA,
mandatory for STM32MP13 family and prepare the support of new device
with more OTP than 95.
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/bsec.c | 38
1 file changed, 30 insertions
From: Yann Gautier
Add chip revision B support for STM32MP25, for displaying it in trace.
Signed-off-by: Yann Gautier
Signed-off-by: Patrick Delaunay
---
arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-stm32mp/stm32mp2
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Signed-off-by: Patrick Delaunay
Signed-off-by: Alexandre Torgue
---
arch/arm/dts/stm32mp25-u-boot.dtsi | 4
arch/arm
tm32mp15-scmi-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-scmi-u-boot.dtsi
@@ -135,7 +135,7 @@
};
&usart1 {
- resets = <&rcc USART1_R>;
+ resets = <&scmi_reset RST_SCMI_USART1>;
};
&usart2 {
Reviewed-by: Patrick Delaunay
Thanks
Patrick
amp;bmi);
}
if (data->script)
cmd_source_script(data->script, NULL, NULL);
Reviewed-by: Patrick Delaunay
Thanks
Patrick
arg, fdt_arg);
+ bootm_argv[2] = initrd_arg;
+ bootm_argv[3] = fdt_arg;
+
/* Try bootm for legacy and FIT format image */
if (genimg_get_format(uimage) != IMAGE_FORMAT_INVALID)
do_bootm(cmdtp, 0, 4, bootm_argv);
Reviewed-by: Patrick Delaunay
Thanks
Patrick
td(mtd, buf);
}
if (IS_ENABLED(CONFIG_DFU_VIRT)) {
Reviewed-by: Patrick Delaunay
Thanks
Patrick
len += snprintf(buf + len, DFU_ALT_BUF_LEN - len, ";");
- first = false;
-
len += snprintf(buf + len, DFU_ALT_BUF_LEN - len,
- "%s_%s part %d",
+ ";%s_%s part %d",
de 100644 board/st/stm32mp2/MAINTAINERS
create mode 100644 board/st/stm32mp2/Makefile
create mode 100644 board/st/stm32mp2/stm32mp2.c
create mode 100644 configs/stm32mp25_defconfig
create mode 100644 include/configs/stm32mp25_common.h
with the minor remark on commit message
Reviewed-by: Patrick Delaunay
Thanks
Patrick
/stm32mp25xxai-pinctrl.dtsi
create mode 100644 arch/arm/dts/stm32mp25xxak-pinctrl.dtsi
create mode 100644 arch/arm/dts/stm32mp25xxal-pinctrl.dtsi
Reviewed-by: Patrick Delaunay
Thanks
Patrick
ble = "st,stm32mp135-pinctrl" },
+ { .compatible = "st,stm32mp257-pinctrl" },
+ { .compatible = "st,stm32mp257-z-pinctrl" },
{ }
};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
/serial/serial_stm32.c | 23 +--
drivers/serial/serial_stm32.h | 2 +-
2 files changed, 14 insertions(+), 11 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
Hi,
On 10/27/23 16:43, Patrice Chotard wrote:
When building with AARCH64 defconfig, we got warnings, fix them.
Signed-off-by: Patrice Chotard
---
arch/arm/mach-stm32mp/bsec.c | 29 +++--
1 file changed, 15 insertions(+), 14 deletions(-)
Reviewed-by: Patrick
for reserved memory for display, fdt, gd,... */
size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size,
MMU_SECTION_SIZE),
Reviewed-by: Patrick Delaunay
Thanks
Patrick
Hi,
On 10/27/23 16:42, Patrice Chotard wrote:
From: Patrick Delaunay
When building with AARCH64 defconfig, we got warnings for debug
message
- format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'size_t' {aka 'long unsigned int&
} else if (ret) {
+ log_err("RAM init failed: %d\n", ret);
return ret;
}
ret = ram_get_info(dev, &ram);
Reviewed-by: Patrick Delaunay
Thanks
Patrick
defined(CONFIG_SYS_ARM_CACHE_WRITEBACK)
+#define DCACHE_DEFAULT_OPTION DCACHE_WRITEBACK
+#endif
+
#ifndef __ASSEMBLY__
/**
* save_boot_params() - Save boot parameters before starting reset sequence
Reviewed-by: Patrick Delaunay
Thanks
Patrick
From: Simon Glass
Correct this typo in the warning message shown when no more bootstage
records can be added.
Signed-off-by: Simon Glass
Signed-off-by: Patrick Delaunay
---
I just cherry-pick the Simon's patch in the branch fix-bs-working
of the dm custodian git but it is not yet prese
ed part_length)
{
With the remarks:
Reviewed-by: Patrick Delaunay
Thanks
Patrick
Hi,
On 9/26/23 17:09, Patrice Chotard wrote:
From: Patrick Delaunay
split the file stm32mp_dfu.c in two files to simplify the Makefile
- stm32mp_dfu.c: required by CONFIG_SET_DFU_ALT_INFO
- stm32mp_dfu_virt.c: required by CONFIG_DFU_VIRT for stm32prog
command or VIRT device for PMIC for
Hi,
On 9/26/23 17:09, Patrice Chotard wrote:
From: Patrick Delaunay
Add support of USB key boot in distro boot command.
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrice Chotard
---
include/configs/stm32mp13_common.h | 9 -
1 file changed, 8 insertions(+), 1 deletion
Hi,
On 9/26/23 17:09, Patrice Chotard wrote:
From: Patrick Delaunay
Activate the command stm32prog with CONFIG_CMD_STM32MPROG.
The CONFIG_SET_DFU_ALT_INFO is also activated to support
the required weak functions for the DFU virtual backen defined in
board/st/common/stm32mp_dfu.c.
Signed-off
Hi,
On 9/26/23 17:09, Patrice Chotard wrote:
Enable USB related flags.
Signed-off-by: Patrice Chotard
---
configs/stm32mp13_defconfig | 18 ++
1 file changed, 18 insertions(+)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
-boot.dtsi
@@ -38,3 +38,7 @@
bootph-all;
};
};
+
+&usbotg_hs {
+ u-boot,force-b-session-valid;
+};
Reviewed-by: Patrick Delaunay
Thanks
Patrick
-bindings/reset/stm32mp1-resets.h | 2 +-
include/dt-bindings/reset/stm32mp13-resets.h | 2 +-
20 files changed, 585 insertions(+), 166 deletions(-)
create mode 100644 include/dt-bindings/regulator/st,stm32mp13-regulator.h
Reviewed-by: Patrick Delaunay
Thanks
Patrick
files changed, 9 insertions(+), 9 deletions(-)
rename drivers/rng/{stm32mp1_rng.c => stm32_rng.c} (100%)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
h7-mdma";
reg = <0x5800 0x1000>;
Reviewed-by: Patrick Delaunay
Thanks
Patrick
, 51 insertions(+), 3 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
, 140 insertions(+), 23 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
changed, 38 insertions(+), 5 deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
deletions(-)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
+CONFIG_RNG_STM32=y
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
with commit message update
Reviewed-by: Patrick Delaunay
Thanks
Patrick
7 files changed, 8 insertions(+), 8 deletions(-)
rename drivers/rng/{stm32mp1_rng.c => stm32_rng.c} (100%)
Reviewed-by: Patrick Delaunay
Thanks
Patrick
Hi,
On 9/8/23 21:07, Heinrich Schuchardt wrote:
On 9/7/23 18:21, Gatien Chevallier wrote:
RNG clock error detection is now enabled if the "clock-error-detect"
property is set in the device tree.
Signed-off-by: Gatien Chevallier
---
drivers/rng/stm32_rng.c | 22 +-
1 fil
Hi Simon,
On 8/24/23 17:14, Tom Rini wrote:
On Thu, Aug 24, 2023 at 05:09:07PM +0200, Marek Vasut wrote:
On 8/24/23 16:25, Tom Rini wrote:
On Thu, Aug 24, 2023 at 05:12:45AM +0200, Marek Vasut wrote:
On 8/24/23 05:02, Simon Glass wrote:
A '.stm32' extension is not allowed anymore, so change
90,7 +91,6 @@ CONFIG_VIDEO_STM32_MAX_XRES=480
CONFIG_VIDEO_STM32_MAX_YRES=800
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_VIDEO_BMP_RLE8=y
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
Reviewed-by: Patrick Delaunay
Thanks
Patrick
1 - 100 of 1001 matches
Mail list logo