The VFAT short alias checksum read from a long file name is only overwritten
when another long file name appears in a directory list. Until then it renders
short file names invisible that have the same checksum. Reset the checksum on
first match.
Signed-off-by: Sergei Shtylyov sshtyl
Hello.
On 21-10-2011 10:44, Bas van den Berg wrote:
the cache also needs to be invalidated, not just flushed, Since re-enabling
it,
can cause inconsistent data without invalidation. See example below.
in c-file:
static int num = 1;
void test() {
num = 1;
dcache_enable();
Hello.
On 21-10-2011 10:32, Heiko Schocher wrote:
Signed-off-by: Heiko Schocherh...@denx.de
Cc: Albert ARIBAUDalbert.u.b...@aribaud.net
Cc: Sandeep Paulrajs-paul...@ti.com
---
no changes for v3
doc/README.SPL |1 +
spl/Makefile |1 +
2 files changed, 2 insertions(+), 0
-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
---
fs/fat/fat.c |6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
Index: u-boot/fs/fat/fat.c
===
--- u-boot.orig/fs/fat/fat.c
+++ u-boot/fs/fat/fat.c
@@ -572,8 +572,8
Hello.
On 12-10-2011 15:31, Christian Riesch wrote:
MDSTAT.STATE occupies bits 0..5 according to all available documentation,
therefore change the bitmask to 0x3f.
Signed-off-by: Christian Rieschchristian.rie...@omicron.at
Cc: Heiko Schocherh...@denx.de
Cc: Paulraj Sandeeps-paul...@ti.com
Hello.
On 08-10-2011 17:47, Lei Wen wrote:
So that sdhci host would tell in the driver that the mmc current
attributes.
Signed-off-by: Lei Wenlei...@marvell.com
[...]
diff --git a/include/sdhci.h b/include/sdhci.h
index e84d2dc..e4e7ebe 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
Hello.
On 26-09-2011 20:02, Laurence Withers wrote:
In nand_davinci_readecc(), select the correct NANDFnECC register based
on CONFIG_SYS_NAND_CS rather than hardcoding the choice of NANDF1ECC.
This allows 1-bit hardware ECC to work with chip select other than CS2.
Note this now matches the
asm/arch/hardware.h
due to C-specfic constructs in it.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
---
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S |8 +---
arch/arm/cpu/arm926ejs/davinci/psc.c |4 ++--
arch/arm/include/asm/arch-davinci/hardware.h |2 ++
3
Hello.
On 09/21/2011 04:40 PM, nagabhushana.netagu...@ti.com wrote:
From: Nagabhushana Netagunte nagabhushana.netagu...@ti.com
add a function in board file to pass board revision
info to kernel. Revision number 0 and 1 are passed in
case of DM6467 and DM6467T respectively.
Signed-off-by:
Hello.
On 17-09-2011 1:01, Wolfgang Denk wrote:
Dear Sergei Shtylyov,
Thank you for the really quick response. :-)
MDSTAT.STATE occupies bits 0..5 according to all available documentation, so
fix
the masks which previously was leaving out the intermediate state indicator
bit
Hello.
On 16-09-2011 3:18, Fabio Estevam wrote:
When booting a mainline kernel on a mx31pdk the system gets getting resets
from the watchdog.
That's tautological. Maybe is getting reset?
As the kernel has watchdog support, disable it from U-boot.
Signed-off-by: Fabio
MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix
the masks which previously was leaving out the itermediate state indicator bit.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
---
Analogous Linux patch has been queued in the linux-davinci tree:
http
MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix
the masks which previously was leaving out the intermediate state indicator bit.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
---
Resending with the corrected subject/description...
Analogous Linux patch
Hello.
On 05-09-2011 13:43, Wolfgang Denk wrote:
The ALPR custom FPGA code was missed by commit e6a857d fpga:
constify to fix build warning resulting in such warnings:
fpga.c:226: warning: initialization from incompatible pointer type
Signed-off-by: Wolfgang Denkw...@denx.de
Cc: Stefan
Hello.
On 25-08-2011 12:33, Simon Schwarz wrote:
Adds a Readme for the savebp command
Signed-off-by: Simon Schwarzsimonschwarz...@gmail.com
[...]
diff --git a/doc/README.commands.savebp b/doc/README.commands.savebp
new file mode 100644
index 000..dc05ee0
--- /dev/null
+++
Hello.
On 26-08-2011 13:24, Ingo van Lil wrote:
Currently the ethernet MAC address is read from the 'ethaddr'
environment variable into the dev-enetaddr field each time the network
hardware is initialized, but it is written to the actual hardware only
once at board startup. When 'ethaddr' is
Hello.
On 22-08-2011 12:45, Helmut Raiger wrote:
eth_get_dev_by_name() is not safe to use for devname being NULL
as it uses strcmp. This patch makes it fail with a BUG().
Signed-off-by: Helmut Raigerhelmut.rai...@hale.at
---
V2: use BUG_ON() instead of gracefully returning 0
net/eth.c
The root directory cluster field only exists in a FAT32 boot sector, so the
'root_cluster' variable in do_fat_read() contains garbage in case of FAT12/16.
Make it contain 0 instead as this is what is passed to get_vfatname() in that
case anyway.
Signed-off-by: Sergei Shtylyov sshtyl...@mvista.com
.
Signed-off-by: Sergei Shtylyov sshtyl...@mvista.com
---
Slight optimization atop of commit 3831530dcb7b71329c272ccd6181f8038b6a6dd0
(VFAT: fix processing of scattered long file name entries) and my recently
submitted patch fixing crash with big sector size.
The patch was generated atop of the below
Hello.
On 16-08-2011 6:42, Joel A Fernandes wrote:
Fix for only one led getting set or reset when the led_name is 'all'
Previous discussion:
http://lists.denx.de/pipermail/u-boot/2011-May/093068.html
Signed-off-by: Joel A Fernandesagnel.j...@gmail.com
Signed-off-by: Jason
Hello.
On 16-08-2011 14:31, Lukasz Majewski wrote:
This commit adds support for reading the D cache line size for armv7
architecture.
The get_dcache_line_size() function is supposed to work in conjunction
with memalign call to provide D cache aligned DMA buffers.
Signed-off-by: Lukasz
Hello.
On 16-08-2011 14:22, Donggeun Kim wrote:
In some cases, saving data in RAM as a file with FAT format is required.
This patch allows the file to be written in FAT formatted partition.
The usage is similar with reading a file.
First, fat_register_device function is called before
Hello.
On 10-08-2011 11:12, Joe Hershberger wrote:
Previously only the last N were included based on the current one in use.
Signed-off-by: Joe Hershbergerjoe.hershber...@ni.com
Cc: Joe Hershbergerjoe.hershber...@gmail.com
Cc: Mingkai Humingkai...@freescale.com
Cc: Andy
Hello.
On 08-08-2011 17:57, Yao Cheng wrote:
The issue is found when calling flush_cache() with zero size argument.
The bound of loop is miscalculated in this case and flush_cache() enters a
wrong flushing loop.
To fix this issue I skipped the operations when size is found to be zero.
Hello.
On 08-08-2011 12:07, Yao Cheng wrote:
The issue is found when calling flush_cache() with zero size argument.
The bound of loop is miscalculated in this case and flush_cache() enters a
wrong flushing loop.
To fix this issue I skipped the operations when size is found to be zero.
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the boot sector into 512-byte buffer situated on stack. Make the
FAT code indifferent to the sector size.
Signed-off-by: Sergei Shtylyov sshtyl...@mvista.com
---
fs/fat/fat.c | 97
-by: Sergei Shtylyov sshtyl...@mvista.com
---
fs/fat/fat.c |7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
Index: u-boot/fs/fat/fat.c
===
--- u-boot.orig/fs/fat/fat.c
+++ u-boot/fs/fat/fat.c
@@ -209,16 +209,17 @@ static __u32
Hello.
On 05-08-2011 18:44, Kumar Gala wrote:
From: Poonam Aggrwalpoonam.aggr...@freescale.com
For an IFC Erratum (A-003399) we will need to access IFC registers in
cpu_init_early_f() so expand the TLB covering CCSR to 1M.
Since we need a TLB to cover 1M we move to using TLB1 array for all
Hello.
On 03-08-2011 16:37, Valentin Longchamp wrote:
The current km_arm boards have a Power-On test jumper. When this
jumper is set, this triggers some Power-On tests on the board.
This patch enables the support of this jumper for starting the
memory_regions test when the jumper is set.
Hello.
On 29-07-2011 11:10, Andreas Bießmann wrote:
Commit 09c2e90c110ef99f1203685acd1059114a51b167 unify version_string
introduced a build breakage in cfb_console.c
---8---
cfb_console.c:1497: warning: format '%s' expects type 'char *', but
argument 3 has type 'const char (*)[]'
---8---
Hello.
On 25-07-2011 17:15, Wolfgang Denk wrote:
We also have to shift TEXT_BASE to accomodate for the additional
code size.
Signed-off-by: Wolfgang Denkw...@denx.de
Cc: Kumar Galaga...@kernel.crashing.org
---
board/stx/stxssa/stxssa.c |8
include/configs/stxssa.h |
Hello.
I wrote:
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the MBR into 512-byte buffer situated on stack. Instead use the
variable length arrays to be safe with any large sector size.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
Hello.
On 23-07-2011 17:37, Linus Walleij wrote:
- Take maintainership of the unlisted integratorap, and the
integratorcp boards
- Orphan the versatile maintained by Peter Pearse, as he has retired
from ARM
Cc: Philippe Robinphilippe.ro...@arm.com
Signed-off-by: Linus
Hello.
On 23-07-2011 17:37, Linus Walleij wrote:
The integrator board was apparently never converted over to support
relocation until now. After this the integrator u-boot both compiles
and boots on the Integrator AP.
Signed-off-by: Linus Walleijlinus.wall...@linaro.org
---
Hello.
On 14-07-2011 3:04, Linus Walleij wrote:
This fixes up the SDRAM memory detection code to work with the
latest relocation code, moves it all into dram_init() and
activates memory size detection for the Integrator AP.
Signed-off-by: Linus Walleijlinus.wall...@linaro.org
---
Hello.
Marek Vasut wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Hm... but EHCI controllers only support high speed (USB 2.0) devices...
You need a companion controller (UHCI/OHCI) to support the full/low speed
devices.
WBR, Sergei
Hello.
I wrote:
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the MBR into 512-byte buffer situated on stack. Instead use the
variable length arrays to be safe with any large sector size.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
Hello.
On 30-06-2011 23:33, Alex Waterman wrote:
Adds a short busy loop wait to the atmel_usart.c serial_init()
function.
Signed-off-by: Alex Watermanawater...@dawning.com
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index e326b2b..e355706 100644
---
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the MBR into 512-byte buffer situated on stack. Instead use the
variable length arrays to be safe with any large sector size.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
---
The same change
Hello.
On 16-05-2011 6:24, Chris Packham wrote:
From: Luuk Paulussen luuk.paulus...@alliedtelesis.co.nz
Signed-off-by: Luuk Paulussenluuk.paulus...@alliedtelesis.co.nz
Acked-by: Chris Packhamchris.pack...@alliedtelesis.co.nz
Cc: Ben Warrenbiggerbadder...@gmail.com
[...]
diff --git
Hello.
On 11-05-2011 18:54, Mike Frysinger wrote:
@@ -68,6 +72,23 @@ int post_init_f (void)
int __post_hotkeys_pressed(void)
{
+#ifdef CONFIG_SYS_POST_HOTKEYS_GPIO
+ int ret;
+ unsigned gpio = CONFIG_SYS_POST_HOTKEYS_GPIO;
+
+ ret = gpio_request(gpio, hotkeys);
+ if (ret)
Hello.
On 10-05-2011 21:01, Mike Frysinger wrote:
Now that we have the generic GPIO layer, we can easily provide a common
implementation for the post_hotkeys_pressed() function based on it.
Signed-off-by: Mike Frysingervap...@gentoo.org
---
post/post.c | 21 +
1
Hello.
On 30-04-2011 23:14, Wolfgang Denk wrote:
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when
it
tries to read the MBR into 512-byte buffer situated on stack. Instead
allocate
this buffer dynamically to be safe with any large sector size.
Signed-off-by:
Hello.
On 03-05-2011 16:34, Wolfgang Denk wrote:
Umm... you _are_ aware that you can put dynamically sized arrays on
the stack, aren't you?
No, it seems I'm not. Is it a standard C now?
Best regards,
Wolfgang Denk
WBR, Sergei
___
U-Boot
Hello.
On 13-04-2011 7:02, Fabio Estevam wrote:
Signed-off-by: Fabio Estevamfabio.este...@freescale.com
---
board/freescale/mx51evk/mx51evk.c |6 +-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the MBR into 512-byte buffer situated on stack. Instead allocate
this buffer dynamically to be safe with any large sector size.
Signed-off-by: Sergei Shtylyov sshtyl...@ru.mvista.com
---
The same change
Hello.
On 02-02-2011 19:41, Catalin Radu wrote:
diff --git a/lib/gunzip.c b/lib/gunzip.c
index 482a476..18cb45b 100644
--- a/lib/gunzip.c
+++ b/lib/gunzip.c
@@ -106,12 +106,16 @@ int zunzip(void *dst, int dstlen, unsigned char *src,
unsigned long *lenp,
s.avail_in = *lenp - offset;
Your signoff line got pasted to the subject.
WBR, Sergei
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hello.
seedshope wrote:
Since SDRAM init function have already change, So the SDRAM
initial function must be change.
This description sounds somewhat tautological...
Signed-off-by: seedshope bocui...@gmail.com
Your real name is required in the signoff.
---
Hello.
Po-Yu Chuang wrote:
From: Po-Yu Chuang ratb...@faraday-tech.com
This patch also update get_timer() usage.
This seems like a material for a separate patch.
Signed-off-by: Po-Yu Chuang ratb...@faraday-tech.com
---
drivers/net/ftmac100.c | 20 +---
1 files
Hello.
On 18-01-2011 22:30, Marek Vasut wrote:
Signed-off-by: Marek Vasutmarek.va...@gmail.com
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 2160d5a..bcf1934 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
On 19-01-2011 2:19, Marek Vasut wrote:
Signed-off-by: Marek Vasutmarek.va...@gmail.com
[...]
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 2160d5a..bcf1934 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@
Hello.
Stefano Babic wrote:
From: Anatolij Gustschin ag...@denx.de
The MXC SPI driver didn't calculate the SPI clock up to
now and just highest possible divider 512 for DATA
^
I think used shouldn't have been ommitted here.
RATE in the control register. This results in
Hello.
On 15-01-2011 14:22, Baidu Boy wrote:
This patch fix a problem for the pcie enumeration when the mpc83xx pcie
controller is
connected with switch or we use both of the two pcie controller.
Signed-off-by: Baidu Boy liucai@gmail.com
[...]
diff --git
Hello.
On 12-01-2011 17:52, seedshope wrote:
Since SDRAM init function have already change, So the SDRAM
initial function must be change.
Signed-off-by: seedshopebocui...@gmail.com
diff --git a/board/samsung/smdk6400/smdk6400.c
b/board/samsung/smdk6400/smdk6400.c
index 35aa40b..52b44a8
Hello.
On 13-01-2011 9:09, Wolfgang Denk wrote:
Hm... I just notice the caviumnetworks in your address, so this is
probably MIPS? Check if your caches are turned on...
BTW, Cavium also produces ARMs (like CNS3xxx)...
Best regards,
Wolfgang Denk
WBR, Sergei
Hello.
On 11-01-2011 17:52, seedshope wrote:
Since SDRAM init function have already change, So the SDRAM
initial function must be change.
Signed-off-by: seedshopebocui...@gmail.com
diff --git a/board/samsung/smdk6400/smdk6400.c
b/board/samsung/smdk6400/smdk6400.c
index 35aa40b..52b44a8
On 11.01.2011 3:31, Mike Frysinger wrote:
it isnt a problem to have the parens, and it keeps things sane if someone
does something like:
#define CONFIG_SYS_BD_INFO_ADDR SOME_DEFINE + 0x1000
This would be a violation of basic rules of defensive coding.
Please drop these parens.
i dont
Hello.
On 07-01-2011 15:42, Baidu Boy wrote:
This patch fix a problem for the pcie enumeration when the mpc83xx pcie
controller
is connected with switch or we use both of the two pcie controller.
Signed-off-by: Baidu Boyliucai@gmail.com
---
Changes for v2:
- Avoid line wrap in
Hello.
On 07-01-2011 15:29, Baidu Boy wrote:
This patch fix a problem for the pcie enumeration when the mpc83xx pcie
controller
is connected with switch or we use both of the two pcie controller.
Signed-off-by: Baidu Boyliucai@gmail.com
---
arch/powerpc/cpu/mpc83xx/pcie.c |8
Hello.
On 06-01-2011 19:58, Kumar Gala wrote:
Add the needed defines and code to utilize the common 8xxx srio init
code to setup LAWs and modify device tree if we have SRIO enabled on a
board.
Signed-off-by: Kumar Galaga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc86xx/fdt.c|
Hello.
On 26-12-2010 5:41, Yanjun Yang wrote:
The lan91c96_detect_chip routine is not correct according
to the manual.
Signed-off-by: YanJun Yangyangyj...@gmail.com
[...]
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index bd6966e..2550aa2 100644
---
Hello.
On 27-12-2010 5:46, Thomas Chou wrote:
Signed-off-by: Thomas Choutho...@wytron.com.tw
[...]
diff --git a/arch/nios2/include/asm/gpio.h b/arch/nios2/include/asm/gpio.h
index 36a7132..4b21c8f 100644
--- a/arch/nios2/include/asm/gpio.h
+++ b/arch/nios2/include/asm/gpio.h
@@ -52,6
Hello.
On 27-12-2010 7:48, Mike Frysinger wrote:
The recent global data changes (making the size autogenerated) broke the
board info handling on Blackfin ports as we were lying and lumping the
bd_t size in with the gd_t size. So use the new dedicated bd_t size to
setup its own address in
Hello.
On 21-12-2010 21:12, Michal Simek wrote:
Clear coding style issues.
Signed-off-by: Michal Simekmon...@monstr.eu
[...]
diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c
index 2209561..f1af7e2 100644
--- a/lib/asm-offsets.c
+++ b/lib/asm-offsets.c
@@ -19,11 +19,11 @@
Hello.
On 21-12-2010 16:02, Michal Simek wrote:
Microblaze implement enable/disable interrupts through MSR
that's why disable_interrupts function should return 1 when interrupt
was enabled. Return 0 when interrupt was disabled.
Signed-off-by: John Linnjohn.l...@xilinx.com
Signed-off-by:
Hello.
On 19-12-2010 1:21, Wolfgang Denk wrote:
Print a message when a RDIMM is detected.
...
+} else
printf(ERROR: Mix of registered buffered and unbuffered
DIMMs detected!\n);
-}
Mutli-line statement needs braces.
Well, not only
Hello.
On 25-11-2010 19:00, Wolfgang Denk wrote:
Get rid of compiler warning:
e1000.c: In function 'e1000_transmit':
e1000.c:5028: warning: passing argument 1 of 'virt_to_phys' discards
qualifiers from pointer target type
Signed-off-by: Wolfgang Denkw...@denx.de
[...]
diff --git
Hello.
On 24-11-2010 13:15, Thomas Weber wrote:
Guard strchr/strlen from being called with NULL pointer.
This line is crashing on OMAP3/Devkit8000 when command env is called
without subcommand.
Toolchain is Codesourcery 2010q1.
The cmd is NULL in this case because the calling function
Hello.
On 15-10-2010 04:23, Mike Frysinger wrote:
We cannot rely on the syscontrol rom func to program PLL_DIV with anomaly
05000440 is in effect, so manually program the MMR when necessary.
Signed-off-by: Mike Frysingervap...@gentoo.org
[...]
diff --git a/arch/blackfin/cpu/initcode.c
Hello.
On 12-10-2010 15:49, Matthias Weisser wrote:
This patch fixes the reset command on imx25
Signed-off-by: Matthias Weisserweiss...@arcor.de
[...]
diff --git a/arch/arm/cpu/arm926ejs/mx25/reset.c
b/arch/arm/cpu/arm926ejs/mx25/reset.c
index 1e33150..a5fd170 100644
---
Hello.
On 10/11/10 05:41, Michal Simek wrote:
Support New emaclite AXI IP.
Signed-off-by: Michal Simekmon...@monstr.eu
CC: Ben Warrenbiggerbadder...@gmail.com
[...]
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 455ce0c..76af939 100644
---
Hello.
On 09-10-2010 1:49, Steve Sakoman wrote:
The crash was occuring in env_relocate because it was being called prior
to mmc_initialize. This patch moves the MMC initialization earlier in
the init process.
This patch also cleans up the env_relocate_spec code in env_mmc.c
Developed
Hello.
On 10-10-2010 17:42, Steve Sakoman wrote:
The crash was occuring in env_relocate because it was being called prior
to mmc_initialize. This patch moves the MMC initialization earlier in
the init process.
This patch also cleans up the env_relocate_spec code in env_mmc.c
Developed
On 10-10-2010 19:47, Steve Sakoman wrote:
The crash was occuring in env_relocate because it was being called prior
to mmc_initialize. This patch moves the MMC initialization earlier in
the init process.
This patch also cleans up the env_relocate_spec code in env_mmc.c
Developed jointly
Hello.
On 08-10-2010 12:03, Stefano Babic wrote:
mmc_initialize is not called at the startup if the
relocation takes place and the environment is stored
into a MMC card.
Signed-off-by: Stefano Babicsba...@denx.de
[...]
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index
Hello.
On 06-10-2010 11:37, Mike Frysinger wrote:
From: Marc-André Héberthebert.marcan...@gmail.com
The spansion_erase currently only works when the sector size is 64KB.
cmd[1] should contain the higher 8 bit of the 24 bit address of the
sector to be erased. Currently it is holding the
Hello.
On 05-10-2010 9:41, Heiko Schocher wrote:
commit ea882baf9c17cd142c99e3ff640d3ab01daa5cec introduces
a command_sub_table for the env command. On arm, avr32, m68k,
mips and sparc architectures, relocation needs manual fixups,
so add these fixups for this sub command table too.
Tested
Hello.
On 04-10-2010 7:37, Graeme Russ wrote:
The header of recent Linux Kernels includes the size of the image, and
therefore is not needed to be passed to zboot. Still process the third
parameter (size of image) in the event that an older kernel is being loaded
Signed-off-by: Graeme
Hello.
On 04-10-2010 7:37, Graeme Russ wrote:
To allow for 'load anywhere' images, the %ebp return pointer 'hack' must
be removed, so we cannot have two 'calls' to get_mem_size
Signed-off-by: Graeme Russgraeme.r...@gmail.com
[...]
diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
Hello.
On 02-10-2010 21:33, Marek Vasut wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
[...]
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index 83d967b..fe84c3b 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -525,6 +525,12 @@ static cmd_tbl_t
Hello.
On 29-09-2010 23:05, Peter Tyser wrote:
Add the ability to not report an I2C POST error for a set of given I2C
addresses on bootup. This is useful for the following cases:
- Some form factors such as XMC and Compact PCI Express have an I2C
EEPROM whose address changes based on
Hello.
Peter Tyser wrote:
+#ifdef I2C_ADDR_IGNORE_LIST
+ unsigned char i2c_ignore_list[] = I2C_ADDR_IGNORE_LIST;
This array is aking to be *static*...
... and *const* as well ?
I'll add 'const' in the next version, but I'm not sure if the 'static'
adds any benefit since its a local
Hello.
Peter Tyser wrote:
+#ifdef I2C_ADDR_IGNORE_LIST
+unsigned char i2c_ignore_list[] = I2C_ADDR_IGNORE_LIST;
This array is aking to be *static*...
... and *const* as well ?
I'll add 'const' in the next version, but I'm not sure if the 'static'
adds any benefit since its a
Hello.
On 21-09-2010 23:35, Albert Aribaud wrote:
Signed-off-by: Albert Aribaudalbert.arib...@free.fr
[...]
diff --git a/board/LaCie/edminiv2/config.mk b/board/LaCie/edminiv2/config.mk
index 3dec1aa..b4845ad 100644
--- a/board/LaCie/edminiv2/config.mk
+++ b/board/LaCie/edminiv2/config.mk
Hello.
On 13-09-2010 8:06, Lei Wen wrote:
Signed-off-by: Lei Wenlei...@marvell.com
---
drivers/mmc/mmc.c | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index cf4ea16..5ff1c54 100644
--- a/drivers/mmc/mmc.c
+++
Hello.
On 13-09-2010 8:06, Lei Wen wrote:
Signed-off-by: Lei Wenlei...@marvell.com
---
common/cmd_mmc.c | 20
disk/part.c |3 +++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index c0b30d8..fe04f8d
Hello.
Lei Wen wrote:
Change log:
change the puts to printf to better formating.
This change log should have followed the --- tear-line.
Signed-off-by: Lei Wen lei...@marvell.com
---
WBR, Sergei
___
U-Boot mailing list
U-Boot@lists.denx.de
Hello.
Lei Wen wrote:
Signed-off-by: Lei Wen lei...@marvell.com
[...]
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index c0b30d8..437dd88 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
[...]
@@ -230,5 +249,6 @@ U_BOOT_CMD(
read device num addr blk# cnt\n
mmc write
Hello.
On 07-09-2010 18:28, Eric Cooper wrote:
derived from patches posted by Jeff Doozan
in the uBoot forum at http://forum.doozan.com
Signed-off-by: Eric Coopere...@cmu.edu
[...]
diff --git a/board/Marvell/dockstar/dockstar.c
b/board/Marvell/dockstar/dockstar.c
index 13cd347..7788837
Hello.
On 07-09-2010 3:02, Albert Aribaud wrote:
mvsata_ide_initialize_port(): adjust init sequence (SStatus
should be checked only after all writes to SControl) and
return success/failure to ide_preinit().
Also, as some tests showed init durations in the hundreds
of us, raise the time-out
Hello.
Albert ARIBAUD wrote:
On 05.09.2010 23:33, Albert ARIBAUD wrote:
+ /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
control = readl(port-scontrol);
control = (control ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
+ /* Toggle control DET back to 0 (normal operation)
Hello.
On 04-09-2010 14:34, Albert Aribaud wrote:
mvsata_ide_initialize_port(): adjust init sequence (SStatus
should be checked only after all writes to SControl) and
return success/failure to ide_preinit().
Also, as some tests showed init durations in the hundreds
of us, raise the
Hello.
On 02-09-2010 19:33, Steve Sakoman wrote:
This printk was added recently and results in ugly output on systems
with no NAND:
NAND: nand_get_flash_type: unknown NAND device: Manufacturer ID: 0x00, Chip
ID: 0x00 0 MiB
instead of:
NAND: 0 MiB
Signed-off-by: Steve
Hello.
Stefan Roese wrote:
cfi_flash_bank_addr(int bank_nr) returns the base addresses of the
requested bank. Introducing this weak default enables boards to override
this functions with a board specific version when required.
This feature will be used in the lwmon5 board update, supporting
Hello.
Heiko Schocher wrote:
compiling edminiv2 board throws following warning:
Configuring for edminiv2 board...
In file included from /home/hs/i2c/u-boot-i2c/include/asm/arch/orion5x.h:39,
from cpu.c:32:
And? Where's the warning text? :-)
introduced from commit
Hello.
tma...@apm.com wrote:
From: Tirumala Marri tma...@apm.com
This patch adds Universal Interrupt Controller support for
APM82XXX processor.
Signed-off-by: Tirumala R Marri tma...@apm.com
[...]
diff --git a/arch/powerpc/include/asm/ppc4xx-uic.h
b/arch/powerpc/include/asm/ppc4xx-uic.h
Hello.
tma...@apm.com wrote:
From: Tirumala Marri tma...@apm.com
This patch adds L2Cache/SRAM and OCM register definitions.
Signed-off-by: Tirumala R Marri tma...@apm.com
[...]
diff --git a/arch/powerpc/include/asm/ppc4xx-isram.h
b/arch/powerpc/include/asm/ppc4xx-isram.h
index
Hello.
Graeme Russ wrote:
Relocation is not board-specific fir the x86 architectrure, so
s/fir/for/
CONFIG_RELOC_FIXUP_WORKS can be defined globally in the common.h
You mean config.h?
Signed-off-by: Graeme Russ graeme.r...@gmail.com
[...]
diff --git
Hello.
Stefano Babic wrote:
Signed-off-by: Stefano Babic sba...@denx.de
[...]
diff --git a/arch/arm/include/asm/arch-mx51/imx-regs.h
b/arch/arm/include/asm/arch-mx51/imx-regs.h
index 0e3bc2a..06f2720 100644
--- a/arch/arm/include/asm/arch-mx51/imx-regs.h
+++
1 - 100 of 130 matches
Mail list logo
