Hello Joakim,
Joakim Tjernlund wrote:
> Heiko Schocher wrote on 23/09/2009 11:02:09:
>> Hello Joakim,
>>
>> Joakim Tjernlund wrote:
Dear Joakim Tjernlund,
In message <1253178437-32398-1-git-send-email-
>> joakim.tjernl...@transmode.se> you wrote:
> After issuing a STOP one must
Heiko Schocher wrote on 23/09/2009 11:02:09:
>
> Hello Joakim,
>
> Joakim Tjernlund wrote:
> >> Dear Joakim Tjernlund,
> >>
> >> In message <1253178437-32398-1-git-send-email-
> joakim.tjernl...@transmode.se> you wrote:
> >>> After issuing a STOP one must wait until the STOP has completed
> >>> on
Hello Joakim,
Joakim Tjernlund wrote:
>> Dear Joakim Tjernlund,
>>
>> In message <1253178437-32398-1-git-send-email-joakim.tjernl...@transmode.se>
>> you wrote:
>>> After issuing a STOP one must wait until the STOP has completed
>>> on the bus before doing something new to the controller.
>>>
>>>
>
> Dear Joakim Tjernlund,
>
> In message <1253178437-32398-1-git-send-email-joakim.tjernl...@transmode.se>
> you wrote:
> > After issuing a STOP one must wait until the STOP has completed
> > on the bus before doing something new to the controller.
> >
> > Also add an extra read of SR as the manu
Dear Joakim Tjernlund,
In message <1253178437-32398-1-git-send-email-joakim.tjernl...@transmode.se>
you wrote:
> After issuing a STOP one must wait until the STOP has completed
> on the bus before doing something new to the controller.
>
> Also add an extra read of SR as the manual mentions doin
>
> Hello Joakim,
>
> Joakim Tjernlund wrote:
> > After issuing a STOP one must wait until the STOP has completed
> > on the bus before doing something new to the controller.
> >
> > Also add an extra read of SR as the manual mentions doing that
> > is a good idea.
> >
> > Remove surplus write of C
Hello Joakim,
Joakim Tjernlund wrote:
> After issuing a STOP one must wait until the STOP has completed
> on the bus before doing something new to the controller.
>
> Also add an extra read of SR as the manual mentions doing that
> is a good idea.
>
> Remove surplus write of CR just before a wri
After issuing a STOP one must wait until the STOP has completed
on the bus before doing something new to the controller.
Also add an extra read of SR as the manual mentions doing that
is a good idea.
Remove surplus write of CR just before a write, isn't required and
could potentially disturb the
After issuing a STOP one must wait until the STOP has completed
on the bus before doing something new to the controller.
Also add an extra read of SR as the manual mentions doing that
is a good idea.
Remove surplus write of CR just before a write, isn't required and
could potentially disturb the
9 matches
Mail list logo
