On 4/12/08 12:29 PM, Mike Frysinger wrote:
On Friday 11 April 2008, Grant Erickson wrote:
When building against non-local, non-disk-backed file systems (e.g. NFS,
tmpfs), the u-boot build can iterate forever, attempting to re-generate
include/autoconf.mk. This occurs because $(VERSION_FILE)
On Sunday 13 April 2008, Grant Erickson wrote:
On 4/12/08 12:29 PM, Mike Frysinger wrote:
On Friday 11 April 2008, Grant Erickson wrote:
When building against non-local, non-disk-backed file systems (e.g. NFS,
tmpfs), the u-boot build can iterate forever, attempting to re-generate
Hello,
I'm looking for a PCIe card, preferably a NIC, to test PCIe under
U-Boot. I have realized, that the E1000 driver of U-Boot does not have
support for PCIe cards. It actually lags behind the Linux driver a lot
and porting seems to require substantial effort (different SPD EEPROM,
PCIe,
Le samedi 12 avril 2008 à 22:06 +0200, Ulf Samuelsson a écrit :
Add support for the AT91RM9200EK Board.
Hi Ulf,
I do have a few issues with your patch. As you have seen, I started
adapting the Atmel changes for the AT91SAM boards, and in doing so I
tried to implement (well, quite a lot was
Le samedi 12 avril 2008 à 21:03 +0200, Ulf Samuelsson a écrit :
Add ID codes for most recent Atmel NOR flashes
Is there any added value on using the atmel flash driver instead of the
standard CFI driver ? It surely doesn't have any on the SAM9/CAP9
boards, but I'm not sure of the older
In message [EMAIL PROTECTED] you wrote:
When the LM73 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
512 C too high. This patch fixes the problem, and does general cleanup
of the code.
Signed-off-by: Larry
In message [EMAIL PROTECTED] you wrote:
The following changes since commit aeff6d503b6006573d5c6b04fc658a64bebee5fa:
Wolfgang Denk (1):
Merge branch 'master' of git://www.denx.de/git/u-boot-fdt
are available in the git repository at:
. master
Michal Simek (13):
In message [EMAIL PROTECTED] [EMAIL PROTECTED] you wrote:
Please pull from the master branch at git://www.denx.de/git/u-boot-sparc.git
I have rebased it agains the mainline this morning.
Best regards,
Daniel Hellstrom
The following changes since commit
In message [EMAIL PROTECTED] you wrote:
I little while ago I submitted patches for two temperature sensors
drivers: a bug fix for the LM75 driver, and a bug fix and clean-up for
the LM73 driver. The LM75 changes are in the master branch, but the
last time I checked the LM73 changes were not
In message [EMAIL PROTECTED] you wrote:
git://www.denx.de/git/u-boot-ppc4xx.git master
Eugene O'Brien (1):
ppc4xx: Fix power mgt definitions for PPC440
Stefan Roese (3):
ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
ppc4xx: Fix Canyonlands
In message [EMAIL PROTECTED] you wrote:
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (2):
ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
ppc4xx: Fix Canyonlands default environment to work with
In message [EMAIL PROTECTED] you wrote:
git://www.denx.de/git/u-boot-cfi-flash.git master
Guennadi Liakhovetski (1):
cfi_flash: Support buffered writes on non-standard Spansion NOR flash
Applied. Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD:
In message [EMAIL PROTECTED] you wrote:
Could you look at it?
Sure. Done. Sorry for the delay.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone:
In message [EMAIL PROTECTED] you wrote:
git://www.denx.de/git/u-boot-mpc85xx.git master
Kumar Gala (2):
85xx: Use SVR_SOC_VER instead of SVR_VER
85xx: Fix detection of MP cpu spin up
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD:
In message [EMAIL PROTECTED] you wrote:
git://www.denx.de/git/u-boot-mpc83xx.git
Dave Liu (2):
mpc83xx: Fix the SATA clock setting of 837x targets
mpc83xx: Fix the bug of serdes initialization
Jean-Christophe PLAGNIOL-VILLARD (1):
mpc837xerdb: Fix warning: implicit
Could you look at it?
Sure. Done. Sorry for the delay.
Best regards,
Wolfgang Denk
No worries.
Thanks,
Michal Simek
www.monstr.eu
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's
Hi Guennadi,
Now I generated uImage correctly and it boots fine.
Have you ever tried to boot U-boot from NAND
(K9K1G08U0B) on the i.MX31ADS?
Thanks,
Fabio Estevam
--- Guennadi Liakhovetski [EMAIL PROTECTED]
wrote:
On Sat, 12 Apr 2008, Fabio Estevam wrote:
I tried to load the kernel at
On Sun, 13 Apr 2008, Fabio Estevam wrote:
Now I generated uImage correctly and it boots fine.
Good
Have you ever tried to boot U-boot from NAND
(K9K1G08U0B) on the i.MX31ADS?
No, I have not.
Thanks
Guennadi
---
Guennadi Liakhovetski
In message [EMAIL PROTECTED] you wrote:
It isn't generally save to execute applications outside of U-Boot with caches
enabled due to the way the Blackfin processor handles caches (requires
software assistance). This patch disables caches before booting an ELF or
just booting raw code. The
In message [EMAIL PROTECTED] you wrote:
This splits the dcache logic out of do_bootelf into a dedicated weak function
called do_bootelf_exec. This way ports can control the behavior before
executing an ELF image however they like.
Signed-off-by: Mike Frysinger [EMAIL PROTECTED]
---
diff
In message [EMAIL PROTECTED] you wrote:
This splits the arch-specific logic out of do_go() and into a dedicated weak
function called do_go_exec() that lives in cpu directories. This will need
review from i386/nios people to make sure i didnt break them.
Signed-off-by: Mike Frysinger [EMAIL
In message [EMAIL PROTECTED] you wrote:
Ok, done. New, refurbished patch is attached.
Please don't attach, but include inline. Ideally, use git-send-email
to send the patch.
Signed-off-by line missing. Please rebase and resubmit.
Best regards,
Wolfgang Denk
--
DENX Software Engineering
In message [EMAIL PROTECTED] you wrote:
Some hardware, such as the enhanced local bus controller used on some
mpc83xx chips, does ecc transparently when reading and writing data, rather
than providing a generic calculate/correct mechanism that can be exported to
the nand subsystem.
The
In message [EMAIL PROTECTED] you wrote:
blah, and without fail, i swapped nios/i386
---
This splits the arch-specific logic out of do_go() and into a dedicated weak
function called do_go_exec() that lives in cpu directories. This will need
review from i386/nios people to make sure i didnt
In message [EMAIL PROTECTED] you wrote:
From: Sascha Hauer [EMAIL PROTECTED]
Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm=
1136
to cpu/arm1136/omap24xx.
Signed-off-by: Sascha Hauer [EMAIL PROTECTED]
Signed-off-by: Guennadi Liakhovetski [EMAIL PROTECTED]
In message [EMAIL PROTECTED] you wrote:
From: Sascha Hauer [EMAIL PROTECTED]
This patch adds support for the Phytec Phycore-i.MX31 board
Signed-off-by: Sascha Hauer [EMAIL PROTECTED]
Signed-off-by: Guennadi Liakhovetski [EMAIL PROTECTED]
Pulled in directly, thanks.
Best regards,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Kumar Gala [EMAIL PROTECTED]
---
drivers/i2c/fsl_i2c.c |7 +++
1 files changed, 3 insertions(+), 4 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev
In message [EMAIL PROTECTED] you wrote:
according to gvb's suggestion, polishing for the doc.
Signed-off-by: Jerry Van Baren [EMAIL PROTECTED]
Signed-off-by: Dave Liu [EMAIL PROTECTED]
---
doc/README.sata | 24
1 files changed, 12 insertions(+), 12 deletions(-)
In message [EMAIL PROTECTED] you wrote:
On Thu, Mar 27, 2008 at 02:23:44PM -0400, Nick Droogh wrote:
Hi Everyone,
Would this driver work with the LAN9218 chip as well?
The chips in this family differ in that some of them have an integrated
phy and others not. Some have a 16bit bus
In message [EMAIL PROTECTED] you wrote:
From: Sascha Hauer [EMAIL PROTECTED]
This patch adds support for the mx31 litekit board
Signed-off-by: Sascha Hauer [EMAIL PROTECTED]
Signed-off-by: Guennadi Liakhovetski [EMAIL PROTECTED]
Pulled in directly, thanks.
Best regards,
Wolfgang Denk
In message [EMAIL PROTECTED] you wrote:
From: eran liberty [EMAIL PROTECTED]
Adds Support for Altera's Stratix II.
Within your board specific init file you will have to call
1. fpga_init (/* relocated code offset. usually = */ gd-reloc_off);
2. fpga_add (fpga_altera,
In message [EMAIL PROTECTED] you wrote:
From: Sascha Hauer [EMAIL PROTECTED]
This patch adds the core support for Freescale mx31
Signed-off-by: Sascha Hauer [EMAIL PROTECTED]
Signed-off-by: Guennadi Liakhovetski [EMAIL PROTECTED]
Pulled in directly, thanks.
Best regards,
Wolfgang Denk
In message [EMAIL PROTECTED] you wrote:
From: Sascha Hauer [EMAIL PROTECTED]
This patch adds an i2c driver for Freescale i.MX processors
Signed-off-by: Sascha Hauer [EMAIL PROTECTED]
Signed-off-by: Guennadi Liakhovetski [EMAIL PROTECTED]
Pulled in directly, thanks.
Best regards,
In message [EMAIL PROTECTED] you wrote:
Signed-off-by: Dave Liu [EMAIL PROTECTED]
---
drivers/block/ata_piix.h | 26 +++---
1 files changed, 15 insertions(+), 11 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD:
we maintain a Blackfin-specific u-boot wiki that goes into quite a bit of
detail, some of which is duplicated with the main u-boot wiki. how do people
feel about extending the u-boot wiki to allow for arch-specific details ?
-mike
signature.asc
Description: This is a digitally signed message
Split the arch-specific logic out of the common go code and into a dedicated
weak function called do_go_exec() that lives in cpu directories. This will
need review from i386/nios people to make sure I didn't break them.
---
common/cmd_boot.c | 33 +
Change the bootelf setup function into a dedicated weak function called
do_bootelf_exec. This way ports can control the behavior however they
like before/after calling the ELF entry point.
---
common/cmd_elf.c | 33 +
1 files changed, 21 insertions(+), 12
I just don't know enough about how u-boot and C work to get u-boot 1.3.x
working on my s3c2410 board. I managed to get 1.2.0 going with the nand
commands added (not mtdpart though) which should be enough to get linux
booted (though I'm not entirely sure the nand commands are actually
working -
On Sun, Apr 13, 2008 at 6:01 PM, Wolfgang Denk [EMAIL PROTECTED] wrote:
In message [EMAIL PROTECTED] you wrote:
On Thu, Mar 27, 2008 at 02:23:44PM -0400, Nick Droogh wrote:
Hi Everyone,
Would this driver work with the LAN9218 chip as well?
The chips in this family differ in
In message [EMAIL PROTECTED] you wrote:
This patch should resolve the compilation issues on 547x/548x cpus.
Unfortunately it's missing your Signed-off-by: line.
Also, please post patches inline rather than attachments.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD:
In message [EMAIL PROTECTED] you wrote:
Some systems have md5.h installed in /usr/include/. This isn't the desired
file (we want the one in include/md5.h). This will avoid the conflict.
This fixes the host tools building problem
Signed-off-by: Andy Fleming [EMAIL PROTECTED]
---
This
In message [EMAIL PROTECTED] you wrote:
Yes. Thanks.
...
Then how about doing this:
--- a/include/asm-m68k/global_data.h
+++ b/include/asm-m68k/global_data.h
@@ -47,6 +47,9 @@ typedef struct global_data {
unsigned long vco_clk;
unsigned long flb_clk;
#endif
+#ifdef
In message [EMAIL PROTECTED] you wrote:
From: Michal Simek [EMAIL PROTECTED]
Signed-off-by: Michal Simek [EMAIL PROTECTED]
I see you sneaked this in via your microblaze custodian repo. This was
a Bad Thing, and I ask you not to do such things. You were supposed to
run this through the Net
In message [EMAIL PROTECTED] you wrote:
Global variables are not ideal before relocation to RAM.
Byt they don't cause any real problem either, or am I missing
something?
I tend to reject the patch.
-init_fnc_t *init_sequence[] = {
The original idea of having such a list of funtion
In message [EMAIL PROTECTED] you wrote:
Change to COBJS-y method so that the fdt.o library can be properly
conditionally compiled. Without this change, the mpc8xx boards that
don't use CONFIG_OF_LIBFDT still build the fdt.o, causing code bloat
and compile warnings.
Signed-off-by: Gerald
In message [EMAIL PROTECTED]@transmode.se you wrote:
Did you try this one or did du skip it this release?
Unfortunately this doesn't apply any more:
Applying Change env_get_char from a global function ptr to a function.
error: patch failed: common/cmd_bootm.c:1150
error: common/cmd_bootm.c:
On Sunday 13 April 2008, Ben Warren wrote:
On Sun, Apr 13, 2008 at 6:01 PM, Wolfgang Denk [EMAIL PROTECTED] wrote:
In message [EMAIL PROTECTED] you wrote:
On Thu, Mar 27, 2008 at 02:23:44PM -0400, Nick Droogh wrote:
Hi Everyone,
Would this driver work with the LAN9218 chip as
On Sun, Apr 13, 2008 at 9:22 PM, Mike Frysinger [EMAIL PROTECTED] wrote:
On Sunday 13 April 2008, Ben Warren wrote:
On Sun, Apr 13, 2008 at 6:01 PM, Wolfgang Denk [EMAIL PROTECTED] wrote:
In message [EMAIL PROTECTED] you wrote:
On Thu, Mar 27, 2008 at 02:23:44PM -0400, Nick Droogh
Wolfgang Denk wrote:
In message [EMAIL PROTECTED] you wrote:
Change to COBJS-y method so that the fdt.o library can be properly
conditionally compiled. Without this change, the mpc8xx boards that
don't use CONFIG_OF_LIBFDT still build the fdt.o, causing code bloat
and compile warnings.
49 matches
Mail list logo