Le samedi 12 avril 2008 à 22:06 +0200, Ulf Samuelsson a écrit : > Add support for the AT91RM9200EK Board.
Hi Ulf, I do have a few issues with your patch. As you have seen, I started adapting the Atmel changes for the AT91SAM boards, and in doing so I tried to implement (well, quite a lot was borrowed from Linux) a common infrastructure for the SAM9 and CAP9 CPUs/boards. I think that the AT91RM9200 could integrate quite well in the existing framework. I haven't done the job myself yet because I have quite limited ressources at the moment (and this is why I chose 'arch-at91sam9' instead of 'arch-at91'...) but since you're contributing a new port it may be the right time to do it. This means for example: - using at91 gpio macros: at91_set_A_periph(), etc. - using the standard CFI flash driver instead of the custom one - maybe others... Ah, and it would be much easier to quote and comment on your patches if they were inlined in your mails. Thanks, Stelian. -- Stelian Pop <[EMAIL PROTECTED]> ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users