On 20:37 Fri 18 Apr , Mike Frysinger wrote:
The current Blackfin i2c driver does not work properly with certain devices
due to it breaking up transfers incorrectly. This is a rewrite of the
driver and relocates it to the newer place in the source tree.
Signed-off-by: Mike Frysinger
On 10:23 Thu 17 Apr , Rodolfo Giometti wrote:
On Thu, Apr 17, 2008 at 05:49:24AM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 18:46 Wed 16 Apr , Rodolfo Giometti wrote:
Hello,
Using a 1GB CF on my system I get:
equantum pinit on
KINGSTON CF CARD 1GB
On 15:32 Thu 17 Apr , Peter Pearse wrote:
What's the status of re-applying the reverted patches?
I really like to see
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and
cleanup
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505
On 18:46 Wed 16 Apr , Rodolfo Giometti wrote:
Hello,
Using a 1GB CF on my system I get:
equantum pinit on
KINGSTON CF CARD 1GB
Fixed Disk Card
IDE interface
[silicon] [unique] [single] [sleep] [standby] [idle] [low
power]
On 20:40 Wed 26 Mar , Guennadi Liakhovetski wrote:
From: Sascha Hauer [EMAIL PROTECTED]
This patch adds an i2c driver for Freescale i.MX processors
Signed-off-by: Sascha Hauer [EMAIL PROTECTED]
Signed-off-by: Guennadi Liakhovetski [EMAIL PROTECTED]
---
No changes wrt v1
+
+ /* Correct IRDA resistor problem */
+ /* Set PA23_TXD in Output */
+ ((AT91PS_PIO) AT91C_BASE_PIOA)-PIO_OER = AT91C_PA23_TXD2;
+
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* arch number of AT91RM9200DK-Board */
/Makefile 2008-04-12 07:05:14.0 +0200
Ack-By Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
Best Regards,
J.
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's
On 23:21 Mon 14 Apr , Grant Likely wrote:
On Mon, Apr 14, 2008 at 5:28 PM, Guennadi Liakhovetski [EMAIL PROTECTED]
wrote:
On Mon, 14 Apr 2008, Wolfgang Denk wrote:
In message [EMAIL PROTECTED] you wrote:
+#if defined(CONFIG_HARD_I2C) defined (CONFIG_I2C_MXC)
Please
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/.gitignore b/.gitignore
index 7c56594..89e96f5 100644
--- a/.gitignore
+++ b/.gitignore
@@ -11,6 +11,7 @@
*.a
*.o
*~
+*.patch
#
# Top-level generic files
@@ -37,6 +38,7 @@
# stgit generated dirs
patches
Move non-inlied functions into specific drivers file
Set get_prom as weak
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
Signed-off-by: Vlad Lungu [EMAIL PROTECTED]
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index eafd267..99e068b 100644
--- a/drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index e164019..7ee6fd4 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -33,7 +33,7 @@
#define CONFIG_MISC_INIT_R
/*IP address
On 02:33 Wed 09 Apr , Mike Frysinger wrote:
This video driver used to live in the Blackfin cpu directory, but it was
lost during the unification process. This brings it back.
Signed-off-by: Mike Frysinger [EMAIL PROTECTED]
---
board/bf533-stamp/Makefile |4 +-
On 16:49 Tue 08 Apr , Kumar Gala wrote:
On Apr 8, 2008, at 4:19 PM, Ben Warren wrote:
Wolfgang Denk wrote:
In message [EMAIL PROTECTED]
you wrote:
Signed-off-by: Mike Frysinger [EMAIL PROTECTED]
Hm... is anybody using SVN for U-Boot?
Best regards,
Wolfgang Denk
On 16:32 Tue 08 Apr , Pierre Savary wrote:
Hi,
I use a MMCplus 4GB on my design (with at91sam9260). It's wired with 4 bits.
Currently U-boot (1.1.5) can't detect correctly the MMC and so I can't read
1.1.5 is really old please update to the curent RC
Best Regards,
J.
CONFIG_AT91RM9200
+#ifndef CONFIG_AT91RM9200
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate:/* relocate U-Boot to RAM */
we can regroup the ifdef
#if !defined(CONFIG_AT91RM9200) !defined(CONFIG_SKIP_RELOCATE_UBOOT)
otherwise
Ack-by : Jean-Christophe
On 16:19 Wed 02 Apr , Andy Fleming wrote:
Some systems have md5.h installed in /usr/include/. This isn't the desired
file (we want the one in include/md5.h). This will avoid the conflict.
This fixes the host tools building problem
Signed-off-by: Andy Fleming [EMAIL PROTECTED]
---
On 12:52 Fri 04 Apr , [EMAIL PROTECTED] wrote:
From: Michal Simek [EMAIL PROTECTED]
Signed-off-by: Michal Simek [EMAIL PROTECTED]
---
drivers/net/Makefile |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index
On 12:52 Fri 04 Apr , [EMAIL PROTECTED] wrote:
From: Michal Simek [EMAIL PROTECTED]
Signed-off-by: Michal Simek [EMAIL PROTECTED]
---
drivers/net/Makefile |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index
On 13:37 Thu 03 Apr , Martin Krause wrote:
According to the ata (ata5) specification the RESET- signal
shall be asserted for at least 25 us. Without this patch,
the RESET- signal is asserted on some boards for only 1 us
(e. g. on the TQM5200). This patch adds a general delay of
25 us to
On 13:36 Thu 03 Apr , Guennadi Liakhovetski wrote:
Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
series require different addresses for buffered write commands. Define a
configuration option to support buffered writes on those chips. A more
elegant solution would
On 20:40 Thu 03 Apr , Norman wrote:
I have downloaded the 1.3.2 source and wonder where can I locate the latest
stable patches for this platform? I saw an AT91 fork in the source tree, would
that be a better starting point.
Thanks,
Norman
Take a look to the AT91 repository
I'll will
In function 'logbuff_init_ptrs':
cmd_log.c:79: warning: pointer targets in assignment differ in signedness
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/common/cmd_log.c b/common/cmd_log.c
index 34b36ff..b9f9ba0 100644
--- a/common/cmd_log.c
+++ b/common
declaration of function 'fdt_fixup_memory'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile
index dbdc2e0..5f70459 100644
--- a/cpu/mpc8xx/Makefile
+++ b/cpu/mpc8xx/Makefile
@@ -27,16 +27,29 @@ include $(TOPDIR)/config.mk
LIB
ds174x.c: In function 'rtc_get':
ds174x.c:117: warning: no return statement in function returning non-void
ds174x.c: In function 'rtc_set':
ds174x.c:146: warning: 'return' with a value, in function returning void
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git
cmd_nand.c:353: warning: dereferencing type-punned pointer will break
strict-aliasing rules
cmd_nand.c:356: warning: dereferencing type-punned pointer will break
strict-aliasing rules
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/common/cmd_nand.c b/common
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c
b/board/freescale/mpc837xerdb/mpc837xerdb.c
index 83fb60d..965bb67 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 7b1f830..2906aed 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -84,7 +84,7 @@ static int nand_dump(nand_info_t *nand, ulong off
On 21:21 Sat 29 Mar , Luigi 'Comio' Mantellini wrote:
Hi All,
I will rework the patch in order to include all files from LZMA
SDK and some fix. I'll send the patch on Tuesday (I'm in
vacation). These are the implemented features:
- LZMA SDK 4.57 Decode code (vanilla)
- A Buff2Buff
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/drivers/net/s3c4510b_eth.h b/drivers/net/s3c4510b_eth.h
index cbddba7..048307f 100644
--- a/drivers/net/s3c4510b_eth.h
+++ b/drivers/net/s3c4510b_eth.h
@@ -30,8 +30,6 @@
*
*/
-#define __packed__attribute__
fsl_i2c.c: In function 'set_i2c_bus_speed':
fsl_i2c.c:120: warning: 'dfsr' may be used uninitialized in this function
fsl_i2c.c:120: warning: 'fdr' may be used uninitialized in this function
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/drivers/i2c/fsl_i2c.c b
On 15:56 Tue 01 Apr , Kumar Gala wrote:
On Apr 1, 2008, at 3:34 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
fsl_i2c.c: In function 'set_i2c_bus_speed':
fsl_i2c.c:120: warning: 'dfsr' may be used uninitialized in this function
fsl_i2c.c:120: warning: 'fdr' may be used uninitialized
+
+#include common.h
+
+/*---
+ * Linksys NSLU2 RedBoot Trailer Block:
+ *
+ * If we boot from RAM on a system which still contains the original
+ * RedBoot bootloader, check if the trailer signature exists and save
+ *
On 14:12 Mon 31 Mar , Stelian Pop wrote:
Le mercredi 26 mars 2008 à 22:52 +0100, Stelian Pop a écrit :
Hi,
The following patches add support for the AT91SAM9260 SoC and
the AT91SAM9260EK board and make the necessary preparations
for the other AT91SAM9 products.
Hi
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
index 359fdab..3961030 100644
--- a/board/atmel/at91cap9adk/Makefile
+++ b/board/atmel/at91cap9adk/Makefile
@@ -25,10 +25,12 @@ include $(TOPDIR
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/atmel/at91sam9260ek/Makefile
b/board/atmel/at91sam9260ek/Makefile
index 309ea46..8a629b9 100644
--- a/board/atmel/at91sam9260ek/Makefile
+++ b/board/atmel/at91sam9260ek/Makefile
@@ -25,10 +25,12 @@ include
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 952e919..ff932a1 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -23,17 +23,17 @@
include $(TOPDIR)/config.mk
-LIB:= $(obj)libmtd.a
+LIB
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/arm926ejs/at91sam9/Makefile b/cpu/arm926ejs/at91sam9/Makefile
index bf15e1e..203abc2 100644
--- a/cpu/arm926ejs/at91sam9/Makefile
+++ b/cpu/arm926ejs/at91sam9/Makefile
@@ -25,11 +25,14 @@ include $(TOPDIR
missing ARM boards to MAKEALL
use correct at91rm9200 register name
Jean-Christophe PLAGNIOL-VILLARD (5):
use correct at91rm9200 register name in m501sk board
AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
AT91SAM9260EK: Move
On 12:55 Fri 18 Jan , David Brownell wrote:
This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: David Brownell [EMAIL PROTECTED]
You missed m501sk
On 12:45 Fri 18 Jan , David Brownell wrote:
Add some missing ARM boards to MAKEALL. These build correctly,
unlike several of the boards already listed.
Signed-off-by: David Brownell [EMAIL PROTECTED]
Applied
Best Regards,
J.
This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/m501sk/memsetup.S b/board/m501sk
On 12:50 Fri 18 Jan , David Brownell wrote:
Update some ARM9 builds to pass the exact CPU to GCC, when the compiler
supports that specification. This stops pessimizing codegen, and removes
voluminous warnings about (no) interworking support from EABI compilers.
(Like CodeSourcery's ARM
On 16:45 Fri 28 Mar , Joakim Tjernlund wrote:
This avoids an early global data reference.
---
I hope this still applies.
api/api.c|1 -
common/cmd_bootm.c |3 ---
common/cmd_nvedit.c |3 ---
common/env_common.c | 21 +++--
On 09:28 Fri 28 Mar , Peter Pearse wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 28 March 2008 09:11
To: Peter Pearse
Cc: u-boot-users@lists.sourceforge.net
Subject: Re: [U-Boot-Users] Release status - open patches,
pull requests
On 15:16 Wed 26 Mar , Wolfgang Denk wrote:
Hello everybody,
now that the new image format has been merged into mainline, I
propose that we make it mandatory for all newly added boards. That
means, that each new board that gets added shall at least contain
I'll personnaly do it
+static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
+static int pcie_num_buses;
+
+#define cfg_read(val, addr, type, op)*val = op((type)(addr))
+#define cfg_write(val, addr, type, op) op((type *)(addr), (val))
+
+#define PCIE_OP(rw, size, type, op)
On 14:36 Tue 25 Mar , [EMAIL PROTECTED] wrote:
Hi,
I just had the problem of fw_{print,save}env not being able to access
the environment because I was using the default (builtin) environment
after flashing U-Boot.
I wonder if I am the only one having this problem, or is it common
On 12:53 Mon 24 Mar , Scott Wood wrote:
This is a driver for the Flash Control Machine of the enhanched Local Bus
Controller found on some Freescale chips (such as the mpc8313 and the
mpc8379).
Signed-off-by: Scott Wood [EMAIL PROTECTED]
---
This patch applies to the mtd-2.6.22.1
On 12:24 Fri 21 Mar , Pieter Voorthuijsen wrote:
Hello Jean-Christophe,
Thanks for looking into the code, unfortunatly I cannot use the
git-send-email :( Outlook seems to only be able to wrap so I'll attach
the pacthes as a file... I double checked for spaces and coding style..
diff
On 12:28 Fri 21 Mar , Pieter Voorthuijsen wrote:
2nd try, previous one was wrapped:
Double checked spaces and coding style...
Original message:
Hello,
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free
On 12:28 Thu 20 Mar , Pieter Voorthuijsen wrote:
Hello,
This patch adds support for the new Prodrive PMDR-A board. It is based
on the DaVinci DM6441 processor, has 256M DDR2, 8M NOR and 256M of NAND.
(This requires the previous patch that removes board specific code from
On 17:08 Mon 17 Mar , Tsi-Chung Liew wrote:
Provide common configuration in pciauto_config_device() usable for
all architectures
Signed-off-by: TsiChung Liew [EMAIL PROTECTED]
---
drivers/pci/pci_auto.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
On 23:19 Fri 14 Mar , Anton Vorontsov wrote:
This patch adds few routines to configure serdes on 837x targets.
Signed-off-by: Anton Vorontsov [EMAIL PROTECTED]
---
cpu/mpc83xx/Makefile |1 +
cpu/mpc83xx/serdes.c | 156
++
On 02:55 Wed 19 Mar , Shinya Kuribayashi wrote:
Handles machine specific functions by using function pointers.
Signed-off-by: Shinya Kuribayashi [EMAIL PROTECTED]
If possible I will prefer a weak function
Best Regards,
J.
On 11:14 Mon 17 Mar , Nikita V. Youshchenko wrote:
In message [EMAIL PROTECTED] you wrote:
--- a/cpu/mpc8260/Makefile
+++ b/cpu/mpc8260/Makefile
@@ -28,7 +28,7 @@ LIB = $(obj)lib$(CPU).a
START= start.o kgdb.o
COBJS= traps.o serial_smc.o serial_scc.o cpu.o
On 11:31 Mon 17 Mar , Alex wrote:
Hi
Sorry, as you might have guessed I did not run MAKEALL to check my patch :-(
Worse, It would have broken existing code... Sorry again.
I try to avoid such things in future.
I corrected the patch. I tried to run MAKEALL, but it fails, as I don't
On 17:45 Fri 14 Mar , Timur Tabi wrote:
Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
but fsl_i2c.c ignores it and uses conservative value when programming the
I2C bus speed.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/fs/cramfs/uncompress.c b/fs/cramfs/uncompress.c
index 2e906eb..a9c0b7d 100644
--- a/fs/cramfs/uncompress.c
+++ b/fs/cramfs/uncompress.c
@@ -25,7 +25,7 @@
#include watchdog.h
#include zlib.h
-#if defined
On 01:07 Thu 13 Mar , Wolfgang Denk wrote:
In message [EMAIL PROTECTED] you wrote:
+SOBJS= start.o init.o resetvec.o
+COBJS= ddr2_fixed.o nand_boot.o nand_ecc.o ndfc.o
It will be nice to split one line for each file
Why? IMHO the could will not become more readble that
On 10:39 Thu 13 Mar , Daniel Hellstrom wrote:
GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
a debug link (EDCL). The GRETH core is documented in GRIP.pdf
available at www.gaisler.com.
If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
offloading etc.) can
On 10:39 Thu 13 Mar , Daniel Hellstrom wrote:
This patch adds an U-Boot command, ambapp, which prints a summary
of AMBA Bus Plug Play information.
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307
On 16:44 Thu 13 Mar , Anton Vorontsov wrote:
On Wed, Mar 12, 2008 at 11:54:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 18:07 Fri 07 Mar , Anton Vorontsov wrote:
This patch adds few routines to configure serdes on 837x targets.
Signed-off-by: Anton Vorontsov [EMAIL
On 16:54 Tue 11 Mar , Timur Tabi wrote:
I'm trying to write code that uses the pragma weak feature of gcc to define
a
global variable that is used only if it isn't defined somewhere else. I
thought
I had it working, but then I noticed this:
powerpc-linux-gnu-gcc -g -Os -fPIC
On 15:41 Wed 12 Mar , Nobuhiro Iwamatsu wrote:
Signed-off-by: Nobuhiro Iwamatsu [EMAIL PROTECTED]
---
cpu/sh4/Makefile |2 +-
cpu/sh4/pci-sh7751.c | 204
++
include/asm-sh/pci.h |4 +-
3 files changed, 208 insertions(+), 2
On 15:40 Wed 12 Mar , Nobuhiro Iwamatsu wrote:
R2D plus is SH reference board used with SH7751R.
This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
+
+#undef DEBUG
+
+#define CONFIG_SH1
+#define CONFIG_SH4 1
+#define
On 17:27 Wed 12 Mar , Timur Tabi wrote:
Jean-Christophe PLAGNIOL-VILLARD wrote:
SRCS := $(COBJS:.o=.c)
^
Please remove the whitespace
Couldn't you have reviewed my patch when I posted it last month, instead of 5
minutes after the 83xx maintainer applied it to his tree
On 18:07 Fri 07 Mar , Anton Vorontsov wrote:
This patch adds few routines to configure serdes on 837x targets.
Signed-off-by: Anton Vorontsov [EMAIL PROTECTED]
---
cpu/mpc83xx/Makefile |2 +-
cpu/mpc83xx/serdes.c | 161
++
On 17:15 Tue 11 Mar , Stefan Roese wrote:
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.
Signed-off-by: Stefan Roese [EMAIL PROTECTED]
---
include/configs/canyonlands.h | 470
+
1 files changed, 470 insertions(+), 0
On 17:15 Tue 11 Mar , Stefan Roese wrote:
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.
Signed-off-by: Stefan Roese [EMAIL PROTECTED]
---
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS= $(BOARD).o bootstrap.o
Could you split it one line for one file
+SOBJS
On 17:15 Tue 11 Mar , Stefan Roese wrote:
This patch adds basic support for the AMCC 460EX/460GT PPC's.
Signed-off-by: Stefan Roese [EMAIL PROTECTED]
-#define UIC_UIC1C0x0001 /* */
+#define UICB0_UIC2NCI0x0008 /* */
+#define UICB0_UIC2CI
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
index 1b56f8c..304190c 100644
--- a/board/scb9328/flash.c
+++ b/board/scb9328/flash.c
@@ -44,6 +44,7 @@
#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
# define FLASH_BUS vu_char
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
Signed-off-by: Wolfgang Denk [EMAIL PROTECTED]
diff --git a/board/siemens/SCM/scm.h b/board/siemens/SCM/scm.h
index 70c12e6..cb5e03e 100644
--- a/board/siemens/SCM/scm.h
+++ b/board/siemens/SCM/scm.h
@@ -29,7 +29,7
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
index ad56402..aab5509 100644
--- a/board/esd/common/fpga.c
+++ b/board/esd/common/fpga.c
@@ -92,7 +92,7 @@
#endif
-static int fpga_boot(unsigned char *fpgadata
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/Makefile b/Makefile
index d6a0299..dbb39e4 100644
--- a/Makefile
+++ b/Makefile
@@ -601,7 +601,7 @@ mecp5200_config: unconfig
munices_config:unconfig
@$(MKCONFIG) munices ppc mpc5xxx munices
On 15:15 Wed 27 Feb , Jean-Christophe PLAGNIOL-VILLARD wrote:
On 15:12 Wed 27 Feb , Michael Schwingen wrote:
On Mon, Feb 25, 2008 at 12:02:24AM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
actux1:
actux1.c: In function 'checkboard':
actux1.c:92: warning
On 15:12 Wed 27 Feb , Michael Schwingen wrote:
On Mon, Feb 25, 2008 at 12:02:24AM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
actux1:
actux1.c: In function 'checkboard':
actux1.c:92: warning: unused variable 'revision'
Fixed
-
actux2:
actux2.c
On 17:03 Mon 25 Feb , John Rigby wrote:
Third time's the charm.
Adds PCI support for MPC5121
Tested with drivers/net/rtl8139.c
This patch is identical to the previous except PCI support is
now conditonal since pci on old silicon (most silicon currently in field)
does not work.
On 18:35 Mon 25 Feb , Marian Balakowicz wrote:
Signed-off-by: Marian Balakowicz [EMAIL PROTECTED]
---
lib_avr32/Makefile |2 +-
lib_blackfin/Makefile |4 ++--
lib_i386/Makefile |4 ++--
lib_m68k/Makefile |2 +-
lib_microblaze/Makefile |2 +-
On 08:02 Tue 26 Feb , Jean-Christophe PLAGNIOL-VILLARD wrote:
On 17:03 Mon 25 Feb , John Rigby wrote:
Third time's the charm.
Adds PCI support for MPC5121
Tested with drivers/net/rtl8139.c
This patch is identical to the previous except PCI support is
now conditonal
On 08:19 Tue 26 Feb , Markus Brunner wrote:
Hi,
I've seen some patches for stratix II support on the Mailinglist, but none
ended up in the git repository.
e.g.:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/28559
Where are the problems and what has to be done to bring
On 01:35 Sun 24 Feb , Haavard Skinnemoen wrote:
On Sat, 23 Feb 2008 19:07:22 -0500
Mike Frysinger [EMAIL PROTECTED] wrote:
Your tree touches common code
Blackfin-specific pieces of common code ... there's a difference
Isn't that a contradiction? If it's blackfin-specific, it
On 16:24 Sun 24 Feb , Wolfgang Denk wrote:
Hi everybody,
the second (and hopefully last) release candidate for U-Boot v1.3.2
has been released and is available form both the git repository and
the FTP server.
A lot of bugs have been fixed since -rc1, but there are still build
Sync registers definition with linux
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
index 1c026f0..90a33c2 100644
--- a/board/mx1fs2/mx1fs2.c
+++ b/board/mx1fs2/mx1fs2.c
@@ -48,7 +48,7 @@ static void logo_init(void
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index dd263b6..cab727f 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -550,10 +550,11 @@ int getenv_r (char *name, char *buf, unsigned len)
return (-1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/arm920t/s3c24x0/serial.c b/cpu/arm920t/s3c24x0/serial.c
index 6e853b8..064b998 100644
--- a/cpu/arm920t/s3c24x0/serial.c
+++ b/cpu/arm920t/s3c24x0/serial.c
@@ -110,7 +110,6 @@ void serial_setbrg(void)
static int
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c
b/board/atmel/at91cap9adk/at91cap9adk.c
index bde6aa9..52e62de 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -24,6 +24,9
fix mmc_bread function prototype
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index c0cfe65..039ce0f 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -375,7 +375,7 @@ mmc_write(uchar * src, ulong dst, int size)
ulong
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/examples/smc9_eeprom b/examples/smc9_eeprom
deleted file mode 100755
index
1009fecaca513ff1602c49cf74e3cc0d465f88c5..
GIT binary patch
literal 0
HcmV?d1
literal
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index ab5906d..0efd855 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -28,6 +28,7 @@
#include common.h
#include mpc86xx.h
+#include asm/fsl_law.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 0a7a904..516203a 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -168,7 +168,7 @@
#defineCFG_OR0_PRELIM 0xff806e65
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 65052e6..d57548a 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -56,9 +56,10 @@ int checkboard (void)
{
volatile ccsr_gur_t *gur
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index e1b3c52..230e2b3 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -325,6 +325,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
if (p != NULL)
memcpy(p
and remove useless CONFIG_DDR_INTERLEAVE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index e501caf..60a7818 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -943,7 +943,7 @@ unsigned int
On 10:24 Fri 15 Feb , Rodolfo Giometti wrote:
On Thu, Feb 14, 2008 at 01:39:14AM +0100, Wolfgang Denk wrote:
In message [EMAIL PROTECTED] you wrote:
+#if 1 /* @ 60 Hz */
+ mode-crtc_h_total_disp = 0x009f00d2;
+ mode-crtc_h_sync_strt_wid =
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index d167e01..4d1bdd7 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -33,7 +33,7 @@
#define CONFIG_XSENGINE
On 20:49 Tue 29 Jan , Stelian Pop wrote:
+#define AT91C_SMC_PS (0x3 28) /* Page Size */
+#define AT91C_SMC_PS_SIZE_FOUR_BYTES(0x0 28)
+#define AT91C_SMC_PS_SIZE_EIGHT_BYTES (0x1 28)
^
Not needed space
Please Remove it
Best
On 19:41 Mon 28 Jan , Mike Frysinger wrote:
On Monday 28 January 2008, Ulf Samuelsson wrote:
Unfortunately, this code seems useless, at least for the combination AT91 +
SPI flash. Some issues:
I believe that the AT45 is not using the same command set as other
SPI flash memories. I
On 11:54 Mon 28 Jan , Stelian Pop wrote:
AT91CAP9 support - cpu/ files
Signed-off-by: Stelian Pop [EMAIL PROTECTED]
---
include/asm-arm/arch-at91cap9/AT91CAP9.h | 518
include/asm-arm/arch-at91cap9/clk.h| 39 ++
On 15:44 Wed 23 Jan , Marian Balakowicz wrote:
Implementation of the do_bootm_linux() and other bootm helper routines is
architecture specific code. As such it resides in lib_arch directories
in files named arch_linux.c
This patch renames those files to a more clear and accurate
On 11:57 Mon 28 Jan , Stelian Pop wrote:
AT91CAP9 support - board/ files
Signed-off-by: Stelian Pop [EMAIL PROTECTED]
---
board/at91cap9adk/Makefile | 50 +++
board/at91cap9adk/at91cap9adk.c | 295
+++
board/at91cap9adk/config.mk
201 - 300 of 313 matches
Mail list logo
