Hi Marek,
On Wednesday, February 25, 2015 at 09:17:53 AM, Lukasz Majewski wrote:
Hi Marek,
On Tuesday, February 24, 2015 at 02:21:40 PM, Kishon Vijay
Abraham I
wrote:
Hi,
On Monday 23 February 2015 08:29 PM, Marek Vasut wrote:
On Monday, February 23, 2015 at
On Wednesday, February 25, 2015 at 12:10:33 AM, Eric Nelson wrote:
Hi Fabio,
On 02/24/2015 03:25 PM, Fabio Estevam wrote:
On Tue, Feb 24, 2015 at 7:22 PM, Fabio Estevam feste...@gmail.com wrote:
Hi,
I am trying to get USB Mass Storage to work on mx6slevk, but I am
getting the
On Wednesday, February 25, 2015 at 03:23:13 AM, Fabio Estevam wrote:
On Tue, Feb 24, 2015 at 8:19 PM, Fabio Estevam feste...@gmail.com wrote:
Hi Eric,
On Tue, Feb 24, 2015 at 8:10 PM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
You might want to check this value:
#define
On Tuesday, February 24, 2015 at 11:29:39 PM, Lukasz Majewski wrote:
On Tue, 24 Feb 2015 18:56:59 +0100
Marek Vasut ma...@denx.de wrote:
On Monday, February 23, 2015 at 10:06:08 AM, Lukasz Majewski wrote:
Dear Marek,
Hi!
The following changes since commit
Hi Albert,
On 24 February 2015 at 23:28, Albert ARIBAUD albert.u.b...@aribaud.net wrote:
Hello Simon,
I'm a bit (read: almost completely) lost re all the gdata removal stuff;
seems like there is/was this series, and there is the 9-patch series
too, and possibly others... Right now, what
On Sat, Jan 31, 2015 at 12:34 AM, Simon Glass s...@chromium.org wrote:
While we currently don't have driver model support for block devices and
Ethernet, we can still allow this to work when driver model is used for
USB.
Signed-off-by: Simon Glass s...@chromium.org
---
common/cmd_usb.c
The fastboot reboot-bootloader command is defined to
re-enter into fastboot mode after rebooting into
bootloader. This command is usually used after updating
bootloader via fastboot.
This commit implements only a generic side of the
command - setting of the reset flag and then resetting.
Setting
Add EXT2/EXT4 and BOUNCE_BUFFER support.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
include/configs/warp.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/warp.h b/include/configs/warp.h
index cfc2323..8379cec 100644
--- a/include/configs/warp.h
+++
On Tue, Feb 24, 2015 at 12:10 PM, Alexey Firago
alexey_fir...@mentor.com wrote:
The fastboot reboot-bootloader command is defined to
re-enter into fastboot mode after rebooting into
bootloader. This command is usually used after updating
bootloader via fastboot.
This commit implements only a
On Wednesday, February 25, 2015 at 09:17:53 AM, Lukasz Majewski wrote:
Hi Marek,
On Tuesday, February 24, 2015 at 02:21:40 PM, Kishon Vijay Abraham I
wrote:
Hi,
On Monday 23 February 2015 08:29 PM, Marek Vasut wrote:
On Monday, February 23, 2015 at 07:19:03 AM, Kishon Vijay
Hi Albert,
On 25 February 2015 at 06:27, Simon Glass s...@chromium.org wrote:
Hi Albert,
On 24 February 2015 at 23:28, Albert ARIBAUD albert.u.b...@aribaud.net
wrote:
Hello Simon,
I'm a bit (read: almost completely) lost re all the gdata removal stuff;
seems like there is/was this
On Wed, Feb 25, 2015 at 6:27 AM, Paul Kocialkowski cont...@paulk.fr wrote:
Le mercredi 25 février 2015 à 13:31 +0200, Igor Grinberg a écrit :
On 02/25/15 13:19, Paul Kocialkowski wrote:
Le mardi 24 février 2015 à 16:57 -0600, Nishanth Menon a écrit :
Enable the OMAP3 specific errata code for
Le mercredi 25 février 2015 à 13:31 +0200, Igor Grinberg a écrit :
On 02/25/15 13:19, Paul Kocialkowski wrote:
Le mardi 24 février 2015 à 16:57 -0600, Nishanth Menon a écrit :
Enable the OMAP3 specific errata code for 454179, 430973, 621766
and while at it, remove legacy non-revision
Hi,
I read somewhere tha we can generate signed boot sd file for imx28. I
found target in makefile. But how can we configure uboot to generate
this target ?
Best regards,
--
Jérôme Dusautois
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Simon,
On Sat, Jan 31, 2015 at 12:34 AM, Simon Glass s...@chromium.org wrote:
This series adds basic driver model support to USB. The intent is to permit
the various subsystems (OHCI, EHCI, XHCI) to co-exist and allow any number
of USB ports of different types. So far the absolute limit on
Hi Marek,
On Tuesday, February 24, 2015 at 11:29:39 PM, Lukasz Majewski wrote:
On Tue, 24 Feb 2015 18:56:59 +0100
Marek Vasut ma...@denx.de wrote:
On Monday, February 23, 2015 at 10:06:08 AM, Lukasz Majewski
wrote:
Dear Marek,
Hi!
The following changes since
With UMS support we are able to flash the eMMC from U-boot, which is very
convenient.
Add UMS support to make the eMMC flashing process easier.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/warp/warp.c | 6 ++
include/configs/warp.h | 26
On Wed, Feb 25, 2015 at 06:58:03PM +0900, Inha Song wrote:
Hi, Rob,
On Tue, 24 Feb 2015 10:20:13 -0600
Rob Herring r...@kernel.org wrote:
On Mon, Jan 19, 2015 at 1:07 AM, Inha Song ideal.s...@samsung.com wrote:
This patch invoke board-specific USB cleanup (board_usb_cleanup)
On Wed, Feb 25, 2015 at 2:27 AM, Akshay Saraswat aksha...@samsung.com wrote:
Hi Nishanth,
On 17:13-20150224, Nishanth Menon wrote:
On 13:27-20150220, Akshay Saraswat wrote:
This patch adds workaround for ARM errata 798870 which says
If back-to-back speculative cache line fills (fill A and
So I can't debug with the BDI3000 because the target keeps on resetting...
This happens over and over...
- TARGET: processing power-up delay
- TARGET: processing reset request
- TARGET: BDI executes scan chain init string
- TARGET: Bypass check 0x0001 = 0x0004
- TARGET: JTAG exists check
Hi Marek,
On Wed, Feb 25, 2015 at 9:11 AM, Marek Vasut ma...@denx.de wrote:
On Wednesday, February 25, 2015 at 03:23:13 AM, Fabio Estevam wrote:
Ok, I managed to fix it. Will send a patch tomorrow, thanks
Cool, thanks :)
Just to let you know that this original problem was caused by an error
Hi Simon,
With a little bit of delay here are the responses ... :)
On 02/17/2015 08:04 PM, Simon Glass wrote:
Hi Gabriel,
On 15 February 2015 at 14:55, Gabriel Huau cont...@huau-gabriel.fr wrote:
Configure the pinctrl as it required to make some IO controllers
working (USB/UART/I2C/...).
Currently the usage text for the 'ums' command looks like this:
Usage:
ums ums USB_controller [devtype] devnum e.g. ums 0 mmc 0
Hi Simon,
With a little bit of delay here are the responses ... :)
On 02/17/2015 08:04 PM, Simon Glass wrote:
Hi Gabriel,
On 15 February 2015 at 14:55, Gabriel Huau cont...@huau-gabriel.fr wrote:
Configure the pinctrl as it required to make some IO controllers
working (USB/UART/I2C/...).
The
In case of global data structure defined as register volatile compiler
throws an warning about incorrect type used:
---8---
common/board_f.c: In function board_init_f_r:
common/board_f.c:1073:2: warning: passing argument 1 of board_init_r
+(sizetype)gd-reloc_off discards volatile qualifier
Commit 2e82e9252695a612ab0cbf40fa0c7368515f6506 'Exynos: Clock: Cleanup
soc_get_periph_rate' introduced a bug in I2C config. This patch makes cros_ec
keyboard working again on Samsung Chromebook (snow).
Signed-off-by: Guillaume GARDET guillaume.gar...@free.fr
Cc: Akshay Saraswat
On Wed, Feb 25, 2015 at 9:55 AM, Fabio Estevam
fabio.este...@freescale.com wrote:
Add EXT2/EXT4 and BOUNCE_BUFFER support.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
Acked-by: Otavio Salvador ota...@ossystems.com.br
--
Otavio Salvador O.S. Systems
Hi Bin,
On 02/24/2015 11:52 PM, Bin Meng wrote:
Hi Gabriel,
On Mon, Feb 16, 2015 at 5:55 AM, Gabriel Huau cont...@huau-gabriel.fr wrote:
Configure the pinctrl as it required to make some IO controllers
working (USB/UART/I2C/...).
The idea would be in the next version to modify the pch GPIO
On Wednesday, February 25, 2015 at 10:15:24 AM, Lukasz Majewski wrote:
Hi Marek,
Hi!
On Tuesday, February 24, 2015 at 05:05:29 PM, Lukasz Majewski wrote:
Hi Lukasz,
[...]
I'll stick with your recommendation, though I'd like to -- somehow --
work in Inha's credit into those patches
On Wed, Feb 25, 2015 at 9:55 AM, Fabio Estevam
fabio.este...@freescale.com wrote:
With UMS support we are able to flash the eMMC from U-boot, which is very
convenient.
Add UMS support to make the eMMC flashing process easier.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
On Wed, Feb 25, 2015 at 1:03 PM, Fabio Estevam
fabio.este...@freescale.com wrote:
Currently the usage text for the 'ums' command looks like this:
Usage:
ums ums USB_controller [devtype] devnum e.g. ums 0 mmc 0
,so remove the extra 'ums' in the text.
Signed-off-by: Fabio Estevam
On Wednesday, February 25, 2015 at 05:07:00 PM, Fabio Estevam wrote:
Hi Marek,
On Wed, Feb 25, 2015 at 9:11 AM, Marek Vasut ma...@denx.de wrote:
On Wednesday, February 25, 2015 at 03:23:13 AM, Fabio Estevam wrote:
Ok, I managed to fix it. Will send a patch tomorrow, thanks
Cool,
On Wednesday, February 25, 2015 at 05:03:19 PM, Fabio Estevam wrote:
Currently the usage text for the 'ums' command looks like this:
Usage:
ums ums USB_controller [devtype] devnum e.g. ums 0 mmc 0
,so remove the extra 'ums' in the text.
Signed-off-by: Fabio Estevam
On Wed, Feb 25, 2015 at 5:02 AM, Paul Kocialkowski cont...@paulk.fr wrote:
Le mardi 24 février 2015 à 16:57 -0600, Nishanth Menon a écrit :
This is in preperation of using generic cross OMAP code.
I found it a bit confusing at first, since as far as I could see, this
series does not introduce
Hi Bin,
On 02/24/2015 11:52 PM, Bin Meng wrote:
Hi Gabriel,
On Mon, Feb 16, 2015 at 5:55 AM, Gabriel Huau cont...@huau-gabriel.fr wrote:
Configure the pinctrl as it required to make some IO controllers
working (USB/UART/I2C/...).
The idea would be in the next version to modify the pch GPIO
On Wednesday, February 25, 2015 at 02:09:45 PM, Lukasz Majewski wrote:
Hi Marek,
Hi!
On Tuesday, February 24, 2015 at 11:29:39 PM, Lukasz Majewski wrote:
On Tue, 24 Feb 2015 18:56:59 +0100
Marek Vasut ma...@denx.de wrote:
On Monday, February 23, 2015 at 10:06:08 AM, Lukasz
On 02/25/2015 05:15 AM, Paul Kocialkowski wrote:
Le mardi 24 février 2015 à 16:57 -0600, Nishanth Menon a écrit :
430973: Stale prediction on replaced inter working branch causes
Cortex-A8 to execute in the wrong ARM/Thumb state
Impacts: Everything lower than r2p1
Work around: Set IBE to
Akshay Saraswat aksha...@samsung.com writes:
[...]
I don't think it hurts to have a generic function with ARM errata
workaround implementation. Whoever wish to use it can call it in their
boot path. And it's not even getting executed right now for any SoC
other than Exynos542x, so those who
With limit of 16 symbols very simple device names derived drom device
tree description could not be displayed correctly.
For example serial0@0xc0fc1000 will be truncated to sensless
serial0@0xc0fc10 - note dropped tariling zeros.
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
Cc: Simon
Nishanth Menon n...@ti.com writes:
On 13:27-20150220, Akshay Saraswat wrote:
This patch adds workaround for ARM errata 798870 which says
If back-to-back speculative cache line fills (fill A and fill B) are
issued from the L1 data cache of a CPU to the L2 cache, the second
request (fill B) is
On 02/25/2015 02:30 AM, Vincent wrote:
Hi,
as explained here http://community.arm.com/message/25127, it is possible to
boot the raspberry 2 in secure mode, by adding the kernel_old=1 option in
config.txt. The main effects of this option are:
- all 4 cores start executing in secure SVC mode
Dear Dave Kucharczyk,
On Wed, Feb 25, 2015 at 3:19 AM, DaveKucharczyk
david.kucharc...@gmail.com wrote:
I'm porting U-Boot for an MX51 based board.
This is the boot sequence with debug on...
U-Boot 2014.07-svn10 (Feb 24 2015 - 15:49:39)
initcall: 9ff85820
U-Boot code: 9FF8 - 9FFA6824
omap_smc1 is now generic enough to remove duplicate
omap3_gp_romcode_call logic that omap3 introduced.
As part of this change, move to using the generic lowlevel_init.S for
omap3 as well.
Signed-off-by: Nishanth Menon n...@ti.com
---
arch/arm/cpu/armv7/omap-common/Makefile|2 +-
RX51 has a secure logic which uses different parameters compared to
traditional implementation. So, make the generic secure acr write
over-ride-able by board file and refactor rx51 code to use this.
While at it, enable the OMAP3 specific errata code for 454179, 430973,
621766.
Signed-off-by:
Add workaround for Cortex-A15 ARM erratum 798870 which says
If back-to-back speculative cache line fills (fill A and fill B) are
issued from the L1 data cache of a CPU to the L2 cache, the second
request (fill B) is then cancelled, and the second request would have
detected a hazard against a
From: Praveen Rao p...@ti.com
This patch enables the workaround for ARM errata 798870 for OMAP5 /
DRA7 which says If back-to-back speculative cache line fills (fill
A and fill B) are issued from the L1 data cache of a CPU to the
L2 cache, the second request (fill B) is then cancelled, and the
set_pl310_ctrl_reg does use the Secure Monitor Call (SMC) to setup
PL310 control register, however, that is something that is generic
enough to be used for OMAP5 generation of processors as well. The
only difference being the service being invoked for the function.
So, convert the service to a
Hello Simon,
On Wed, 25 Feb 2015 07:00:23 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On 25 February 2015 at 06:27, Simon Glass s...@chromium.org wrote:
Hi Albert,
On 24 February 2015 at 23:28, Albert ARIBAUD albert.u.b...@aribaud.net
wrote:
Hello Simon,
I'm a bit
Update to existing recommendation for L2ACTLR configuration to prevent
system instability and optimize performance.
These apply to both OMAP5 and DRA7.
Reported-by: Vivek Chengalvala vchengalv...@ti.com
Signed-off-by: Nishanth Menon n...@ti.com
---
arch/arm/cpu/armv7/omap5/hwinit.c | 16
Enable the OMAP3 specific errata code for 454179, 430973, 621766
and while at it, remove legacy non-revision checked errata logic.
Signed-off-by: Nishanth Menon n...@ti.com
---
arch/arm/cpu/armv7/omap3/board.c | 31 ++-
include/configs/am3517_crane.h |4
This is in preperation of using generic cross OMAP code.
Signed-off-by: Nishanth Menon n...@ti.com
---
.../arm/include/asm/arch-omap3/{omap3.h = omap.h} |0
include/configs/am3517_crane.h |2 +-
include/configs/am3517_evm.h |2 +-
454179: Stale prediction may inhibit target address misprediction on
next predicted taken branch
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around: Set IBE and disable branch size mispredict to 1
Also provide a hook for SoC specific handling to take place if
Hi,
The third incarnation of this series to address various ideas of
previous V2 series. I will skip the full blurb and point to V1/V2
links for the usual blurb.
Changes since V2:
- Added documentation revisioning info with ARM erratums
- patch series are split up to address ARM
430973: Stale prediction on replaced inter working branch causes
Cortex-A8 to execute in the wrong ARM/Thumb state
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around: Set IBE to 1
Based on ARM errata Document revision 20.0 (13 Nov 2010)
Signed-off-by: Nishanth
621766: Under a specific set of conditions, executing a sequence of
NEON or vfp load instructions can cause processor deadlock
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around: Set L1NEON to 1
Based on ARM errata Document revision 20.0 (13 Nov 2010)
On 02/25/2015 01:55 PM, Kevin Hilman wrote:
Nishanth Menon n...@ti.com writes:
On 13:27-20150220, Akshay Saraswat wrote:
This patch adds workaround for ARM errata 798870 which says
If back-to-back speculative cache line fills (fill A and fill B) are
issued from the L1 data cache of a CPU to
Hello Masahiro,
On Tue, 10 Feb 2015 19:52:56 +0900, Masahiro Yamada
yamad...@jp.panasonic.com wrote:
My main motivation for this commit:
[1] Follow the arch/arm/Makefile style of Linux Kernel
[2] Maintain compiler options systematically
Currently, we give -march=* and -mtune=* options
Le mercredi 25 février 2015 à 08:32 -0600, menon.nisha...@gmail.com a
écrit :
On Wed, Feb 25, 2015 at 6:27 AM, Paul Kocialkowski cont...@paulk.fr wrote:
Le mercredi 25 février 2015 à 13:31 +0200, Igor Grinberg a écrit :
On 02/25/15 13:19, Paul Kocialkowski wrote:
Le mardi 24 février 2015 à
On 01/06/2015 01:11 PM, York Sun wrote:
From: Bhupesh Sharma bhupesh.sha...@freescale.com
This patch ensures that the TZPC (BP147) and TZASC-400 programming
happens for LS2085A SoC only when the desired config flags are
enabled and ensures that the TZPC programming is done to allow
I applied the patch, but it still hangs.
The directory tree is different for mx5x vs. MX35
I added relocate.S to...arch/arm/cpu/armv7/mx5/relocate.S
and modified Makefile here...arch/arm/cpu/armv7/mx5/Makefile
Does that seem right?
--
View this message in context:
On 01/21/2015 01:29 AM, Minghuan Lian wrote:
LS1021A's PCIe1 region begins 0x40_; PCIe2 begins
0x48_. In order to access PCIe device, we must create
TLB to map the 40bit physical address to 32bit virtual address.
This patch will enable MMU after DDR is available and creates
On 01/20/2015 07:16 AM, Volodymyr Riazantsev wrote:
Add support of the DDR mode for eSDHC driver.
Enable it for i.MX6 SoC family only.
Change-Id: Ie27a945c9fe79d044cc886e269b60747f1744116
Signed-off-by: Volodymyr Riazantsev volodymyr.riazant...@globallogic.com
---
Applied to
On 02/23/2015 10:06 AM, Simon Glass wrote:
On 20 February 2015 at 00:21, Gaurav Rana gaurav.r...@freescale.com wrote:
Currently only normal hashing is supported using hardware acceleration.
Added support for progressive hashing using hardware.
Signed-off-by: Ruchika Gupta
Hi Rob,
On 20 February 2015 at 20:24, Rob Herring rob.herr...@linaro.org wrote:
On Wed, Feb 18, 2015 at 1:52 PM, Dileep Katta dileep.ka...@linaro.org
wrote:
This patch adds functionality to getvar command to get the userdata
partition
size.
This is non-standard and doesn't scale to
Tom,
The following changes since commit 38dac81b3d0e777f301ca98100bfbcab01d616c2:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2015-02-23 16:18:06
-0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to
On 01/16/2015 01:23 AM, Alison Wang wrote:
This patch is to define default values for some CCSR macros
to make header files cleaner.
Signed-off-by: Alison Wang alison.w...@freescale.com
---
Applied to u-boot-fsl-qoriq master branch, awaiting upstream.
York
On 01/21/2015 01:29 AM, Minghuan Lian wrote:
Signed-off-by: Minghuan Lian minghuan.l...@freescale.com
---
This set is applied to u-boot-fsl-qoriq master branch, awaiting upstream.
York
___
U-Boot mailing list
U-Boot@lists.denx.de
On 01/16/2015 01:21 AM, Alison Wang wrote:
There 4 JRs, 4 RTICs and 8 DECOs, and set them the same stream id
for using the same SMMU3 on LS1021A.
Signed-off-by: Xiubo Li li.xi...@freescale.com
Signed-off-by: Alison Wang alison.w...@freescale.com
---
Changes in v2:
- Move changing CCSR
On 01/22/2015 11:53 PM, Chenhui Zhao wrote:
The RCPM FSM may not be reset after power-on, for example,
in the cases of cold boot and wakeup from deep sleep.
It causes cache coherency problem and may block deep sleep.
Therefore, reset them if they are not be reset.
Signed-off-by: Chenhui
On 02/24/2015 08:07 PM, Gaurav Rana wrote:
This patch does the following:
1. The function names for encapsulation and decapsulation
were inconsitent in freescale's implementation and cmd_blob file.
This patch corrects the issues.
2. The function protopye is also modified to change the
Hi Suriyan,
On Thu, Jan 22, 2015 at 5:46 PM, Suriyan Ramasami suriya...@gmail.com wrote:
On Thu, Jan 22, 2015 at 9:51 AM, Kevin Hilman khil...@kernel.org wrote:
Suriyan Ramasami suriya...@gmail.com writes:
Hello Kevin,
On Wed, Jan 21, 2015 at 4:54 PM, Kevin Hilman khil...@kernel.org wrote:
Hi Dave,
On Wed, Feb 25, 2015 at 6:23 PM, DaveKucharczyk
david.kucharc...@gmail.com wrote:
I applied the patch, but it still hangs.
The directory tree is different for mx5x vs. MX35
I added relocate.S to...arch/arm/cpu/armv7/mx5/relocate.S
and modified Makefile
Hello Albert,
On Tue, 24 Feb 2015 14:53:36 +0100, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
When building a THumb-1-only target with CONFIG_SYS_THUMB_BUILD,
some files fail to build, most of the time because they include
mcr instructions, which only exist for Thumb-2.
Thos patch
Hello Stephen,
On Tue, 24 Feb 2015 09:51:56 -0700, Stephen Warren
swar...@wwwdotorg.org wrote:
On 02/24/2015 01:48 AM, Albert ARIBAUD wrote:
Hello,
Can anyone confirm that on current u-boot/master, rpi_2 build fine with
git clean -xfd; make rpi_2_defconfig; make
but fails with
[Reposting comment on v4 as York requested]
On Wed, Feb 25, 2015 at 02:17:56PM +0530, Aneesh Bansal wrote:
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c
b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 4cf8853..ef56cc0 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++
Hello, Joe
Can you provide more exact details on the servers you are trying including
versions?
Perhaps also provide pcap files (not text dumps) so the exact packet contents can be
observed?
Recently I've done some tests, hope you find them interesting.
Server in question:
Linux sterver
Fabio Estevam-2 wrote
Also, you said that your 512MB board version works fine, but the 256MB
fails.
I suppose you are using two different binaries for each board, right?
You can't have a single binary for the two boards, unless you use the
SPL approach.
Fabio, we use one binary. It has
In the discussion after the submission of the Let the distro boot command scan
all partitions patchset it became clear the general consensus was that
u-boot should not simply scan all partitions but instead only partitions with
the bootable flag set, falling back to parition 1 as was previously
Add an optional -bootable parameter to the part list commands to only
put the list of bootable partitions in the environment variable
Signed-off-by: Sjoerd Simons sjoerd.sim...@collabora.co.uk
---
common/cmd_part.c | 53 +
1 file changed, 41
List bootable partitions and only scan those for bootable files, falling
back to partition 1 if there are no bootable partitions
Signed-off-by: Sjoerd Simons sjoerd.sim...@collabora.co.uk
Reviewed-by: Hans de Goede hdego...@redhat.com
---
include/config_distro_bootcmd.h | 3 ++-
1 file changed,
env exists allows scripts to query whether an environment variable
exists. Enable by default as it adds only a trivial amount of code and
can be useful in scripts.
Signed-off-by: Sjoerd Simons sjoerd.sim...@collabora.co.uk
Reviewed-by: Hans de Goede hdego...@redhat.com
---
Hey Simon,
Incidentally i got acces to a Nyan big and wanted to start testing
u-boot on it. Unfortunately putting a uImage in a vboot signed blob to
chainload it from the primary bootloader like on the exynos based
chromebooks seemed not to work.
Do you have any good pointers how to use u-boot
On Wed, Feb 25, 2015 at 01:29:17PM -0800, York Sun wrote:
Tom,
The following changes since commit 38dac81b3d0e777f301ca98100bfbcab01d616c2:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2015-02-23 16:18:06
-0500)
are available in the git repository at:
On 02/25/2015 05:54 PM, Simon Glass wrote:
On 24 February 2015 at 17:06, Stephen Warren swar...@wwwdotorg.org wrote:
On 02/24/2015 04:44 PM, Simon Glass wrote:
On 24 February 2015 at 14:08, Stephen Warren swar...@wwwdotorg.org
wrote:
This series performs a few small cleanups to or
By specification the FIFO size would be in a range 2-256 bytes. From TX Level
prospective it means we can set threshold in the range 0-(FIFO size - 1) bytes.
Hence there are currently two issues:
a) FIFO size 2 bytes is actually skipped since TX Level is 1 bit and could be
either 0 or 1
Hi Simon,
On Thu, Feb 26, 2015 at 8:55 AM, Simon Glass s...@chromium.org wrote:
Hi Bin,
On 25 February 2015 at 00:10, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Wed, Feb 11, 2015 at 9:59 AM, Simon Glass s...@chromium.org wrote:
Some systems have more than 4GB of RAM. U-Boot can only
On 24 February 2015 at 17:02, Joe Hershberger joe.hershber...@ni.com wrote:
On some archs masking the parameter is inefficient, so don't use u8.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reported-by: Simon Glass s...@chromium.org
---
Changes in v4:
-New to v4
Changes in v3:
On 24 February 2015 at 17:02, Joe Hershberger joe.hershber...@ni.com wrote:
Many functions returned -1 previously. Change them to return appropriate error
codes.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reported-by: Simon Glass s...@chromium.org
---
Changes in v4:
-New to v4
On 02/17/2015 03:29 PM, Simon Glass wrote:
Add an implementation of the timer functions for tegra, so that timing
is more accurate. Tegra has a 1 microsecond timer for this purpose.
I'm a bit confused about this:
include/configs/tegra-common.h:32:#define CONFIG_SYS_TIMER_COUNTER
On 02/17/2015 03:29 PM, Simon Glass wrote:
We need to turn on all audio-related clocks for the kernel to boot.
Otherwise it will hang when trying to enable audio.
This certainly isn't true for the upstream kernel; is this some bug in
the ChromeOS kernel? If so, we should explicitly call this
On 02/17/2015 03:29 PM, Simon Glass wrote:
From: Doug Anderson diand...@chromium.org
This header includes useful scripts which can be used with any board that
can boot Chrome OS.
In particular, 'run nvboot' will boot a board without verified boot enabled.
I think this needs a bit of
This patch adds support to flash zImage to the boot partition on eMMC.
Usage: fastboot flash zImage path_to_zImage
Signed-off-by: Angela Stegmaier angelaba...@ti.com
Signed-off-by: Dileep Katta dileep.ka...@linaro.org
---
drivers/usb/gadget/f_fastboot.c | 152
On Wed, Feb 25, 2015 at 3:45 PM, Dileep Katta dileep.ka...@linaro.org wrote:
Hi Rob,
On 20 February 2015 at 20:24, Rob Herring rob.herr...@linaro.org wrote:
On Wed, Feb 18, 2015 at 1:52 PM, Dileep Katta dileep.ka...@linaro.org
wrote:
This patch adds functionality to getvar command to get
Hi Bin,
On 25 February 2015 at 00:10, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Wed, Feb 11, 2015 at 9:59 AM, Simon Glass s...@chromium.org wrote:
Some systems have more than 4GB of RAM. U-Boot can only place things below
4GB so any memory above that should not be used. Ignore any such
Hi Bin,
On 25 February 2015 at 01:45, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Feb 19, 2015 at 5:10 AM, Simon Glass s...@chromium.org wrote:
At present we do more in this function than we should. Create a new
x86_post_cpu_init() which can be called from the board file when needed
Hi Bin,
On 25 February 2015 at 00:32, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Wed, Feb 11, 2015 at 9:59 AM, Simon Glass s...@chromium.org wrote:
Support running U-Boot as a coreboot payload. Tested peripherals include:
- Video (HDMI and DisplayPort)
- SATA disk
- Gigabit Ethernet
Hi Stephen,
On 24 February 2015 at 17:06, Stephen Warren swar...@wwwdotorg.org wrote:
On 02/24/2015 04:44 PM, Simon Glass wrote:
Hi Stephen,
On 24 February 2015 at 14:08, Stephen Warren swar...@wwwdotorg.org
wrote:
From: Stephen Warren swar...@nvidia.com
This series performs a few small
On 25 February 2015 at 11:26, Alexey Brodkin
alexey.brod...@synopsys.com wrote:
With limit of 16 symbols very simple device names derived drom device
tree description could not be displayed correctly.
For example serial0@0xc0fc1000 will be truncated to sensless
serial0@0xc0fc10 - note dropped
On 02/17/2015 03:29 PM, Simon Glass wrote:
We need to match the device tree in the FIT with the U-Boot model so we
can automatically select the right device tree. Also adjust the load address
so that the device tree is not in the way when a zImage kernel tries to
extract itself.
We don't tend
Dear Dave Kucharczyk,
On Wed, Feb 25, 2015 at 11:08 PM, DaveKucharczyk
david.kucharc...@gmail.com wrote:
Fabio Estevam-2 wrote
Also, you said that your 512MB board version works fine, but the 256MB
fails.
I suppose you are using two different binaries for each board, right?
You can't have a
1 - 100 of 147 matches
Mail list logo
