Hi Joe,
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:26 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
Subject: Re: [U-Boot] [PATCH 03/11 v2] drivers/net/vsc9953: Add default
There is no good reason to use a particular key to stop autobooting.
The default allows us to stop the autoboot with any key input.
Signed-off-by: Masahiro Yamada yamada.masah...@socionext.com
---
Changes in v2:
- Rebase on commit 7853d76b0
configs/ph1_ld4_defconfig | 4
Hello,
Since git 2.1, there have been a number of new fsck options added which
produce issues when I clone fsck the repository
git://git.denx.de/u-boot.git
$ git fsck --full
Checking object directories: 100% (256/256), done.
error in tag eb394f56db3e05d00891d6dc36a00df0025cf255: unterminated
Hi Joe,
I will make the changes you requested.
Thanks and best regards,
Codrin
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:38 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
From: Yegor Yefremov yegorsli...@googlemail.com
Add CONFIG_SYS_GENERIC_BOARD to board's config header.
Boot-tested on am3517_evm board.
Signed-off-by: Yegor Yefremov yegorsli...@googlemail.com
---
include/configs/am3517_crane.h |1 +
include/configs/am3517_evm.h |1 +
2 files
Hi Joe,
I will make the changes you requested.
Thanks and best regards,
Codrin
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:34 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
On Sun, 2015-06-28 at 17:28 +0200, Hans de Goede wrote:
Right, that is expected, all the fel spl command does is load the
spl, you need to do something like this to fel boot:
This worked, thanks. Couple of notes:
sudo ~hans/bin/fel version
echo Write SPL
sudo ~hans/bin/fel spl
Hi Joe,
I removed the lines on which we agreed on...
+ switch (mode) {
+ case EGRESS_UNTAG_ALL:
+ clrsetbits_le32(l2rew_reg-port[port_no].port_tag_cfg,
+ CONFIG_VSC9953_TAG_CFG_MASK,
+
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
If a destination is not provided, jffs2_1pass_read_inode() only
returns the length of the file. In this case, avoid reading all
the data nodes, and return as soon as the length of the file is
known.
Signed-off-by: Mark Tomlinson
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
Copying complete nodes from flash can be slow if the flash is slow
to read. By only reading the data needed, the sorting operation can
be made much faster.
The directory entry comparison function also had a two bugs. First, it
did not
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
jffs2_1pass_read_inode() would read the entire data for each node
in the filesystem, regardless of whether it was part of the file
to be loaded or not. By only reading the header data for an inode,
and then reading the data only when it
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
If multiple versions of a file exist, only the most recent version
should be used. The scheme to write 0 for the inode in older versions
did not work, since this would have required writing to flash.
The only time this caused an issue
Hi Joe,
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:31 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
Subject: Re: [U-Boot] [PATCH 04/11 v2] drivers/net/vsc9953: Refractor the
Hi Stefano,
On Sun, Jun 28, 2015 at 01:00:07PM +0200, Stefano Babic wrote:
Hi Peng,
On 14/06/2015 11:38, Peng Fan wrote:
Since rom code supports the following commands, add new commands support in
imximage.
It is better to explain here which i.MX are supporting this ROM (i.MX6
and i.MX7).
-Original Message-
From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
Sent: Tuesday, June 30, 2015 8:28 PM
To: Kushwaha Prabhakar-B32579
Cc: Wood Scott-B07421; Sun York-R58495; tr...@konsulko.com; u-
b...@lists.denx.de; Dharmakan Rohit-B30502
Subject: Re:
On 6/30/2015 7:24 PM, Jagan Teki wrote:
Hi Haikun,
On 30 June 2015 at 04:48, Simon Glass s...@chromium.org wrote:
Hi,
On 26 June 2015 at 05:30, Haikun Wang haikun.w...@freescale.com wrote:
Atmel DataFlash chips have commands different from common spi
flash commands.
Atmel DataFlash also
Hi,
Any feedback for this series patch?
Best Regards,
Josh Wu
On 6/11/2015 1:21 PM, Josh Wu wrote:
This series is based on the patch I sent:
http://patchwork.ozlabs.org/patch/481095/
As above introduces the default empty function for invalidate_dcache_range()
flush_dcache_range() in
T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
T1040D4RDB is re-designed T1040RDB board with following changes :
- Support of DDR4 memory
- Support of 0x66 serdes protocol which can support following interfaces
- 2 RGMII's on DTSEC4, DTSEC5
- 1
This patch adds a minimal framework for Dickens CCN-504
interconnect configuration - mainly related to adding Clusters/cores
to snoop/DVM domain and setting QoS of the RN-I ports.
LS2085A platform makes use of these configurations to support
better network data performance and to boot a SMP
Hello,
I have found the following issue with RPi 2:
Only 1 CPU is brought up when the kernel is started from script (see [1]).
All 4 CPUs are brought up if started manually typing in environment
variables from said script (see [2]).
U-Boot: 2015.04-rc5-gd6d345b
kernel:
Hi,
On 29-06-15 05:44, Simon Glass wrote:
Hi Hans.
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
Drop the unneeded portnr function argument, the portnr is part of the
usb_device struct which is passed via the dev argument.
Signed-off-by: Hans de Goede hdego...@redhat.com
Hi,
On 29-06-15 05:44, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
Pass the usb_device instead of the portnr to usb_legacy_port_reset and
rename it to usb_hub_port_reset as there is nothing legacy about it.
Signed-off-by: Hans de Goede
Hi,
On 29-06-15 05:45, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
On an usb stop instead of leaving orphan usb devices behind simply remove
On a usb_stop()
or
On a 'usb stop' command ?
My intention was for both, since I was under the
Dear Mark,
In message
1435554149-18042-1-git-send-email-mark.tomlin...@alliedtelesis.co.nz you
wrote:
These patches fix bugs and improve performance of JFFS2. Some of these
improvements can already be found in old mailing lists, but for some
reason they have not made their way into the
Hi,
On 29-06-15 05:45, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
These functions are useful to remove all children from an usb bus before
rescanning the bus.
Signed-off-by: Hans de Goede hdego...@redhat.com
---
Hi,
On 30-06-15 15:30, Ian Campbell wrote:
On Tue, 2015-06-30 at 15:11 +0200, Hans de Goede wrote:
[...]
The latest patch-series seems to do the exact reverse. More knowledge is
being moved away from a central place and into defconfig files. As said
ARCH_SUNXI builds must always have
Hi,
On 28-06-15 18:06, Tom Rini wrote:
On Sun, Jun 28, 2015 at 05:39:28PM +0200, Hans de Goede wrote:
Hi,
On 26-06-15 23:05, Tom Rini wrote:
On Fri, Jun 26, 2015 at 12:13:51PM +0200, Hans de Goede wrote:
Hi Tom,
Please pull u-boot-sunxi/master into master for two bug-fixes,
and one new
On Tue, 2015-06-30 at 15:11 +0200, Hans de Goede wrote:
[...]
The latest patch-series seems to do the exact reverse. More knowledge is
being moved away from a central place and into defconfig files. As said
ARCH_SUNXI builds must always have CONFIG_DM* set, and yet now all sunxi
defconfig
Hi Joe,
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:39 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
Subject: Re: [U-Boot] [PATCH 07/11 v2] drivers/net/vsc9953: Add commands to
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
If a sector has a CLEANMARKER at the beginning, it indicates that the
entire sector has been erased. Therefore, if this is found, we can skip the
entire block. This was not being done before this patch.
The code now does the same as
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
When building the file system the existing code does an insertion into
a linked list. It attempts to speed this up by keeping a pointer to
where the last entry was inserted but it's still slow.
Now the nodes are just inserted into the
This prepares for new SoCs support.
Signed-off-by: Masahiro Yamada yamada.masah...@socionext.com
---
arch/arm/mach-uniphier/cpu_info.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/mach-uniphier/cpu_info.c
b/arch/arm/mach-uniphier/cpu_info.c
index c4ba6d2..5d9ed84
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
If a sector has a CLEANMARKER at the beginning, it indicates that the
entire sector has been erased. Therefore, if this is found, we can skip the
entire block. This was not being done before this patch.
The code now does the same as
Hello Mark,
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
The scan code is similar to the linux kernel, but the kernel defines a much
smaller size to scan through before deciding a sector is blank. Assuming
that what is in the kernel is OK, make these two match.
On its own, this change makes
Hello Mark,
please fix Tom rinis mail address globally for your patchset into
Tom Rini tr...@konsulko.com
I fixed it for my response manually, thanks!
BTW: You can use patman for creating patches/patchset.
Look into u-boot:tools/patman
Am 29.06.2015 um 07:02 schrieb Mark Tomlinson:
If the
Hi Joe,
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:41 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
Subject: Re: [U-Boot] [PATCH 08/11 v2] drivers/net/vsc9953: Add VLAN commands
Hi Joe,
I will make a v3 with your suggestions.
Thanks and best regards,
Codrin
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:41 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
This patch adds a minimal framework for Dickens CCN-504
interconnect configuration - mainly related to adding Clusters/cores
to snoop/DVM domain and setting QoS of the RN-I ports.
LS2085A platform makes use of these configurations to support
better network data performance and to boot a SMP
When building the file system the existing code does an insertion into
a linked list. It attempts to speed this up by keeping a pointer to
where the last entry was inserted but it's still slow.
Now the nodes are just inserted into the list without searching
through for the correct place. This
If multiple versions of a file exist, only the most recent version
should be used. The scheme to write 0 for the inode in older versions
did not work, since this would have required writing to flash.
The only time this caused an issue was listing a directory, where older
versions of the file
The scan code is similar to the linux kernel, but the kernel defines a much
smaller size to scan through before deciding a sector is blank. Assuming
that what is in the kernel is OK, make these two match.
On its own, this change makes no difference to scanning of any sectors
which have a clean
jffs2_1pass_read_inode() would read the entire data for each node
in the filesystem, regardless of whether it was part of the file
to be loaded or not. By only reading the header data for an inode,
and then reading the data only when it is found to be part of the
file to be loaded, much copying of
In reply to comments from Wolfgang Denk and Heiko Schocher:
My aim was to optimize U-Boot's loading of a JFFS2 file, since we needed to
boot much more quickly on one of our devices than we currently were. We had
discussed the possibility of abandoning JFFS2 entirely, but chose to see
how quickly
If a sector has a CLEANMARKER at the beginning, it indicates that the
entire sector has been erased. Therefore, if this is found, we can skip the
entire block. This was not being done before this patch.
The code now does the same as the kernel does when encountering a
CLEANMARKER. It still checks
Copying complete nodes from flash can be slow if the flash is slow
to read. By only reading the data needed, the sorting operation can
be made much faster.
The directory entry comparison function also had a two bugs. First, it
did not ensure the name was copied, so the name comparison may have
If the flash is slow, reading less from the flash into buffers makes
the process faster.
Signed-off-by: Mark Tomlinson mark.tomlin...@alliedtelesis.co.nz
---
Changes in v2:
- Change comment style
fs/jffs2/jffs2_1pass.c | 25 +
1 file changed, 21 insertions(+), 4
If a destination is not provided, jffs2_1pass_read_inode() only
returns the length of the file. In this case, avoid reading all
the data nodes, and return as soon as the length of the file is
known.
Signed-off-by: Mark Tomlinson mark.tomlin...@alliedtelesis.co.nz
---
Changes in v2:
- Fix
Hello ANDY,
On Tue, 30 Jun 2015 22:02:38 +, ANDY KENNEDY
andy.kenn...@adtran.com wrote:
Attempted to build u-boot with gcc 5.x for mipsel 32. Result was that
I get brokenness around arch/mips/include/asm/io.h and
arch/mips/include/asm/system.h. The source lines all look something
like:
Hi Ian,
On Tue, Jun 30, 2015 at 8:30 AM, Ian Campbell i...@hellion.org.uk wrote:
On Tue, 2015-06-30 at 15:11 +0200, Hans de Goede wrote:
[...]
The latest patch-series seems to do the exact reverse. More knowledge is
being moved away from a central place and into defconfig files. As said
Hi Dennis,
On 27 June 2015 at 01:39, Dennis Gilmore den...@ausil.us wrote:
On Sunday, June 07, 2015 06:55:36 PM Simon Glass wrote:
Hi Tom,
On 5 June 2015 at 16:27, Tom Warren twar...@nvidia.com wrote:
Simon,
Applied to u-boot-tegra/master, then I rebased against u-boot/master and
Hi,
On 29 June 2015 at 22:18, Kushwaha Prabhakar prabha...@freescale.com wrote:
Hi Simon, Tom,
-fdelete-null-pointer-checks flag controls global dataflow analyses and
eliminate useless checks for null pointers; It assume that if a pointer is
checked after it has already been
On 26 June 2015 at 13:21, Jagan Teki jt...@openedev.com wrote:
Add Zynq SPI controller Kconfig entry.
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Simon Glass s...@chromium.org
Cc: Marek Vasut ma...@denx.de
Cc: Michal Simek michal.si...@xilinx.com
Cc: Siva Durga Prasad Paladugu
Troy Kisky will be maintaining the Nitrogen6x board going forward.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
board/boundary/nitrogen6x/MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/boundary/nitrogen6x/MAINTAINERS
+Bin
Hi Andrew,
On 29 June 2015 at 09:10, and...@bradfordembedded.com wrote:
From: Andrew Bradford andrew.bradf...@kodakalaris.com
Allow for configuration of FSP UPD from the device tree which will
override any settings which the FSP was built with itself if the device
tree settings exist,
Hi,
On 06/30/2015 04:58 PM, Simon Glass wrote:
Hi Hans,
On 30 June 2015 at 06:54, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 29-06-15 05:45, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
On an usb stop instead of leaving orphan usb
Hi Hans,
On 30 June 2015 at 09:54, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 06/30/2015 04:58 PM, Simon Glass wrote:
Hi Hans,
On 30 June 2015 at 06:54, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 29-06-15 05:45, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans
Hi Masahiro-san,
On Tue, Jun 30, 2015 at 12:20 AM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
Joe,
Ping.
2015-05-27 14:57 GMT+09:00 Masahiro Yamada yamada.masah...@socionext.com:
It is working, but not nice...
Signed-off-by: Masahiro Yamada yamada.masah...@socionext.com
---
Hi Hans,
On 30 June 2015 at 06:54, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 29-06-15 05:45, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
On an usb stop instead of leaving orphan usb devices behind simply remove
On a usb_stop()
Hi Hans,
On 30 June 2015 at 06:31, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 29-06-15 05:44, Simon Glass wrote:
Hi Hans,
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
Pass the usb_device instead of the portnr to usb_legacy_port_reset and
rename it to
Hi Joe,
I will make a v3 with your suggestions.
Thanks and best regards,
Codrin
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Friday, June 26, 2015 1:42 AM
To: Ciubotariu Codrin Constantin-B43658
Cc: u-boot; Joe Hershberger; Sun York-R58495
Hi Hans,
On 30 June 2015 at 06:29, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 29-06-15 05:44, Simon Glass wrote:
Hi Hans.
On 17 June 2015 at 13:33, Hans de Goede hdego...@redhat.com wrote:
Drop the unneeded portnr function argument, the portnr is part of the
usb_device struct
* Wolfgang Denk w...@denx.de [150630 07:29]:
Dear Liam R. Howlett,
In message 20150629173158.gd24...@yow-lhowlett-d0.wrs.com you wrote:
Since git 2.1, there have been a number of new fsck options added which
produce issues when I clone fsck the repository
git://git.denx.de/u-boot.git
Simon,
Does the dm force using device tree? I was reviewing a patch set regarding SPI
and found OF_CONTROL has to be selected in order to get the driver model happy.
My understanding of the driver model is both device tree and platform data are
allowed, like Linux. Is that still true?
York
Hi Andrew,
On 30 June 2015 at 10:58, Andrew Bradford and...@bradfordembedded.com wrote:
Hi Simon,
On 06/30 09:29, Simon Glass wrote:
+Bin
Hi Andrew,
On 29 June 2015 at 09:10, and...@bradfordembedded.com wrote:
From: Andrew Bradford andrew.bradf...@kodakalaris.com
Allow
On Tue, Jun 30, 2015 at 10:48:20AM -0500, Joe Hershberger wrote:
Hi Ian,
On Tue, Jun 30, 2015 at 8:30 AM, Ian Campbell i...@hellion.org.uk wrote:
On Tue, 2015-06-30 at 15:11 +0200, Hans de Goede wrote:
[...]
The latest patch-series seems to do the exact reverse. More knowledge is
being
Hi Simon,
On 27 June 2015 at 04:32, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On 26 June 2015 at 13:07, Jagan Teki jt...@openedev.com wrote:
Hi Simon,
On 26 June 2015 at 21:23, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On 23 June 2015 at 15:03, Jagan Teki jt...@openedev.com
On Tue, Jun 30, 2015 at 08:58:26AM -0600, Simon Glass wrote:
Hi,
On 29 June 2015 at 22:18, Kushwaha Prabhakar prabha...@freescale.com wrote:
Hi Simon, Tom,
-fdelete-null-pointer-checks flag controls global dataflow analyses and
eliminate useless checks for null pointers; It assume
On 6/30/2015 7:48 AM, Eric Nelson wrote:
Troy Kisky will be maintaining the Nitrogen6x board going forward.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
board/boundary/nitrogen6x/MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Hi Simon,
On 06/30 09:29, Simon Glass wrote:
+Bin
Hi Andrew,
On 29 June 2015 at 09:10, and...@bradfordembedded.com wrote:
From: Andrew Bradford andrew.bradf...@kodakalaris.com
Allow for configuration of FSP UPD from the device tree which will
override any settings which the FSP
On Tue, Jun 30, 2015 at 03:11:02PM +0200, Hans de Goede wrote:
Hi,
On 28-06-15 18:06, Tom Rini wrote:
On Sun, Jun 28, 2015 at 05:39:28PM +0200, Hans de Goede wrote:
Hi,
On 26-06-15 23:05, Tom Rini wrote:
On Fri, Jun 26, 2015 at 12:13:51PM +0200, Hans de Goede wrote:
Hi Tom,
Please
Hi York,
On 30 June 2015 at 10:08, York Sun york...@freescale.com wrote:
Simon,
Does the dm force using device tree? I was reviewing a patch set regarding SPI
and found OF_CONTROL has to be selected in order to get the driver model
happy.
My understanding of the driver model is both
Hi Jagan,
On 30 June 2015 at 11:48, Jagan Teki jt...@openedev.com wrote:
Hi Simon,
On 27 June 2015 at 04:32, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On 26 June 2015 at 13:07, Jagan Teki jt...@openedev.com wrote:
Hi Simon,
On 26 June 2015 at 21:23, Simon Glass s...@chromium.org
On 06/30/2015 11:33 AM, Simon Glass wrote:
Hi York,
On 30 June 2015 at 10:08, York Sun york...@freescale.com wrote:
Simon,
Does the dm force using device tree? I was reviewing a patch set regarding
SPI
and found OF_CONTROL has to be selected in order to get the driver model
happy.
On 27 June 2015 at 12:14, Jagan Teki jt...@openedev.com wrote:
Added TEGRA114_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Tom Warren twar...@nvidia.com
Cc: Stephen Warren swar...@nvidia.com
Cc: Simon Glass s...@chromium.org
---
On 27 June 2015 at 12:14, Jagan Teki jt...@openedev.com wrote:
Added TEGRA20_SFLASH entry on Kconfig with help description.
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Tom Warren twar...@nvidia.com
Cc: Stephen Warren swar...@nvidia.com
Cc: Simon Glass s...@chromium.org
---
On 27 June 2015 at 12:14, Jagan Teki jt...@openedev.com wrote:
Added ICH_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Simon Glass s...@chromium.org
---
drivers/spi/Kconfig | 7 +++
1 file changed, 7 insertions(+)
Reviewed-by: Simon
On 06/30/2015 12:01 PM, Tom Rini wrote:
On Tue, Jun 30, 2015 at 11:42:41AM -0700, York Sun wrote:
On 06/30/2015 11:33 AM, Simon Glass wrote:
Hi York,
On 30 June 2015 at 10:08, York Sun york...@freescale.com wrote:
Simon,
Does the dm force using device tree? I was reviewing a patch set
Hi Tom,
On 30 June 2015 at 14:31, Tom Rini tr...@konsulko.com wrote:
On Tue, Jun 30, 2015 at 01:10:45PM -0700, York Sun wrote:
On 06/30/2015 12:01 PM, Tom Rini wrote:
On Tue, Jun 30, 2015 at 11:42:41AM -0700, York Sun wrote:
On 06/30/2015 11:33 AM, Simon Glass wrote:
Hi York,
On
On Tue, Jun 30, 2015 at 11:42:41AM -0700, York Sun wrote:
On 06/30/2015 11:33 AM, Simon Glass wrote:
Hi York,
On 30 June 2015 at 10:08, York Sun york...@freescale.com wrote:
Simon,
Does the dm force using device tree? I was reviewing a patch set regarding
SPI
and found
Hi Simon,
On 06/30 12:13, Simon Glass wrote:
Hi Andrew,
On 30 June 2015 at 10:58, Andrew Bradford and...@bradfordembedded.com wrote:
Hi Simon,
On 06/30 09:29, Simon Glass wrote:
+Bin
Hi Andrew,
On 29 June 2015 at 09:10, and...@bradfordembedded.com wrote:
From:
Hi,
On 06/30/2015 06:07 PM, Simon Glass wrote:
snip
Instead, I wonder if we can remove the children when we probe the bus?
That should work, but I do not really see any advantage in that,
removing the children is not that expensive and it feels like a
kludge.
That's how it currently
On Tue, Jun 30, 2015 at 10:33:17PM +0200, Hans de Goede wrote:
Select a bunch of CONFIG_foo options from ARCH_SUNXI, instead of having
them set to y in every single sunxi defconfig.
Signed-off-by: Hans de Goede hdego...@redhat.com
Ug, sorry, I was waiting for some build results to come out
With certain features being convert to DM now we want sunxi to default
to having DM enabled for ETH/SERIAL and USB in some cases.
Cc: Hans de Goede hdego...@redhat.com
Cc: Ian Campbell i...@hellion.org.uk
Signed-off-by: Tom Rini tr...@konsulko.com
---
arch/arm/Kconfig
Hi,
On 06/30/2015 07:52 PM, Tom Rini wrote:
On Tue, Jun 30, 2015 at 03:11:02PM +0200, Hans de Goede wrote:
Hi,
On 28-06-15 18:06, Tom Rini wrote:
On Sun, Jun 28, 2015 at 05:39:28PM +0200, Hans de Goede wrote:
Hi,
On 26-06-15 23:05, Tom Rini wrote:
On Fri, Jun 26, 2015 at 12:13:51PM
On Tue, Jun 30, 2015 at 01:10:45PM -0700, York Sun wrote:
On 06/30/2015 12:01 PM, Tom Rini wrote:
On Tue, Jun 30, 2015 at 11:42:41AM -0700, York Sun wrote:
On 06/30/2015 11:33 AM, Simon Glass wrote:
Hi York,
On 30 June 2015 at 10:08, York Sun york...@freescale.com wrote:
On 1 July 2015 at 00:12, York Sun york...@freescale.com wrote:
On 06/30/2015 11:33 AM, Simon Glass wrote:
Hi York,
On 30 June 2015 at 10:08, York Sun york...@freescale.com wrote:
Simon,
Does the dm force using device tree? I was reviewing a patch set regarding
SPI
and found OF_CONTROL
Select a bunch of CONFIG_foo options from ARCH_SUNXI, instead of having
them set to y in every single sunxi defconfig.
Signed-off-by: Hans de Goede hdego...@redhat.com
---
arch/arm/Kconfig | 3 +++
configs/A10-OLinuXino-Lime_defconfig | 3 ---
On 27 June 2015 at 12:14, Jagan Teki jt...@openedev.com wrote:
Added TEGRA20_SLINK entry on Kconfig with help description.
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Tom Warren twar...@nvidia.com
Cc: Stephen Warren swar...@nvidia.com
Cc: Simon Glass s...@chromium.org
---
On 27 June 2015 at 12:13, Jagan Teki jt...@openedev.com wrote:
Added EXYNOS_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Simon Glass s...@chromium.org
---
drivers/spi/Kconfig | 7 +++
1 file changed, 7 insertions(+)
Reviewed-by: Simon
Hi Jagan,
On 27 June 2015 at 12:13, Jagan Teki jt...@openedev.com wrote:
Added SPI_FLASH_DATAFLASH entry on Kconfig with help description
Signed-off-by: Jagan Teki jt...@openedev.com
Cc: Haikun Wang haikun.w...@freescale.com
Cc: Simon Glass s...@chromium.org
---
drivers/mtd/spi/Kconfig |
Hi Anton,
On 29.06.2015 19:01, Anton Schubert wrote:
2015-06-23 14:38 GMT+02:00 Stefan Roese s...@denx.de mailto:s...@denx.de:
Hi Anton,
On 23.06.2015 13:23, Bin Meng wrote:
On Tue, Jun 23, 2015 at 5:35 PM, Anton Schubert
anton.schub...@gmx.de
On 30 June 2015 at 02:19, Vikas Manocha vikas.mano...@st.com wrote:
sram size could be different on different socs, e.g. on stv0991 it is 256
while
on altera platform it is 128. It is better to receive it from device tree.
Signed-off-by: Vikas Manocha vikas.mano...@st.com
Still have an
On 30 June 2015 at 02:19, Vikas Manocha vikas.mano...@st.com wrote:
This patch adds the device tree binding doc for the cadence qspi controller
also removes the not needed properties from the device trees using this
controller.
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
Changes
That should be it. Although it's probably a good idea to do this in cpu.c
as you did with your a38x ahci support.
Thanks for your help.
Anton
---
arch/arm/mach-mvebu/include/mach/soc.h | 1 +
drivers/block/mvsata_ide.c | 46
++
The current GPL only licensing on the device trees makes it very
impractical for other software components licensed under another
license.
To make it easier to reuse them, the device trees for UniPhier
SoCs and boards have already been dual-licensed in Linux.
Follow this trend in U-boot too.
This makes code diff much easier.
Device trees describe hardware attributes, which are independent
of software architecture. It generally makes sense to synchronize
them beyond software projects.
Signed-off-by: Masahiro Yamada yamada.masah...@socionext.com
---
Hi Jagan,
On 29/06/2015 22:00, Jagan Teki wrote:
On 22 June 2015 at 12:49, Angelo Dureghello ang...@sysam.it wrote:
On 22/06/2015 08:44, Jagan Teki wrote:
On 22 June 2015 at 03:10, Angelo Dureghello ang...@sysam.it wrote:
Fix compilation warnings for redefined 'clamp' macro and
Hi Haikun,
On 30 June 2015 at 04:48, Simon Glass s...@chromium.org wrote:
Hi,
On 26 June 2015 at 05:30, Haikun Wang haikun.w...@freescale.com wrote:
Atmel DataFlash chips have commands different from common spi
flash commands.
Atmel DataFlash also have special page-size.
This driver add
Hello York,
This patch is not dependent on New SPI driver .
I have analysed the compilation error issue.
There has been some recent changes related to SPI_FLASH config which has caused
the compilation error.
I will send the next version of the patch.
Regards
Priyanka
-Original
Dear Liam R. Howlett,
In message 20150629173158.gd24...@yow-lhowlett-d0.wrs.com you wrote:
Since git 2.1, there have been a number of new fsck options added which
produce issues when I clone fsck the repository
git://git.denx.de/u-boot.git
...
I think these issues were already reported
1 - 100 of 113 matches
Mail list logo
