Hi Tom,
Please pull this PR.
thanks!
Jagan.
The following changes since commit 891b487098ee2169a16b1bbb354aaef28aa90630:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-07-01 15:38:12
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-spi.git master
This is effectively the same code but it also does a clean cache before
invalidating and doing a memory barrier.
Signed-off-by: Alexander Stein alexander...@web.de
---
arch/arm/cpu/arm1176/cpu.c | 10 ++
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git
When using dcache the setup data for the mailbox must be actually written
into memory before calling into firmware. Thus flush and invalidate the
memory.
Signed-off-by: Alexander Stein alexander...@web.de
---
arch/arm/mach-bcm283x/mbox.c | 6 ++
1 file changed, 6 insertions(+)
diff --git
This patchset enables dcache support for Raspberry Pi 1.
First the cache support code was made similar to existing arm1136 code.
The invalidate and flush functions were inprovoed to accept also non-cacheline
aligned addresses. This reduces the cacheline size knowledge from generic
code.
Then rpi
The code is copied 1:1 from arm1136 which uses the same cp15 registers.
Signed-off-by: Alexander Stein alexander...@web.de
---
arch/arm/cpu/arm1176/cpu.c | 97 ++
1 file changed, 97 insertions(+)
diff --git a/arch/arm/cpu/arm1176/cpu.c
cache flushing addresses must be cacheline size aligned, so mask the
start and stop address appropriately.
Signed-off-by: Alexander Stein alexander...@web.de
---
arch/arm/cpu/arm1176/cpu.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/cpu/arm1176/cpu.c
Now that mailbox driver supports cache flush and invalidation, we can
enable dcache.
Signed-off-by: Alexander Stein alexander...@web.de
---
include/configs/rpi-common.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
index
Hi Fabioca,
On 15-06-15 15:17, fabioca wrote:
Please find patch below. I indicated as maintainer name Hans The Goede, as he
his the maintainer of all other sunxi boards. Hope that was the correct
thing to do.
For the next version of this patch please set the MAINTAINERS entry to
yourself, I
Mark,
On Wed, Jul 1, 2015 at 4:38 PM, Mark Tomlinson
mark.tomlin...@alliedtelesis.co.nz wrote:
In reply to comments from Wolfgang Denk and Heiko Schocher:
I think you forgot to Cc Wolfgang and Heiko on this. Ditto with the
updated patches Heiko reviewed from v1.
My aim was to optimize
Le vendredi 12 juin 2015 à 19:56 +0200, Paul Kocialkowski a écrit :
This introduces a coherent scheme for naming USB download gadget and functions
config options. The download USB gadget config option is moved to
CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each
Recent versions of the fastboot tool will query the partition type before doing
an operation on a partition (such as erase, flash, etc). It will then submit
the operation as soon as the response for the partition type is received.
Usually, the MUSB controller will see that the partition type
This avoids handling requests that have an error status or no data.
In particular, this avoids showing unnecessary error messages when the USB
gadget gets disconnected (e.g. with fastboot continue) and the fastboot USB
gadget driver sends an error back to the host (that has disconnected already).
Update some build scripts to match Linux 4.1. Commit-based syncing
was done so as not to break U-Boot specific changes.
The previous big sync was from Linux 3.18-rc1 by commit 176d09827725
(kbuild: sync misc scripts with Linux 3.18-rc1).
The commits imported from Linux (some with adjustments)
Update the files under scripts/kconfig/ to match Linux 4.1.
Some Kconfig sources have diverged from those in the kernel,
so commit-base syncing was done not to lose U-Boot specific updates.
The commits cherry-picked from Linux are:
[1] commit be8af2d54a66911693eddc556e4f7a866670082b
Author:
$(always) is added to targets by scripts/Makefile.build.
Moreover, filechk does not need .*.cmd files.
Adding these two files to targets is redundant.
Signed-off-by: Masahiro Yamada yamada.masah...@socionext.com
---
Kbuild | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git
These change sets have been imported from Linux.
This series should not change any boards.
Masahiro Yamada (4):
kconfig: sync with Linux 4.1
kbuild: sync with Linux 4.1
kbuild: do not add $((generic-)offsets-file) to targets
kbuild: use relative path more to include Makefile
Kbuild
Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
--include-dir=$(srctree) becomes effective when Make enters into
sub Makefiles.
To use relative path in any places, this commit moves the option
above the sub-make
On 4 July 2015 at 18:23, R, Vignesh vigne...@ti.com wrote:
On 7/3/2015 7:27 PM, Andy Pont wrote:
Vignesh wrote...
[snip]
+#define BIT(x) (1 (x))
+
Is this not something that would be better in a global header file somewhere
rather than it starting
Hi Joe,
On Wed, 2015-07-01 at 18:02 -0400, Tom Rini wrote:
On Wed, Jul 01, 2015 at 10:26:21AM -0500, Joe Hershberger wrote:
Hi Alexey,
On Wed, Jul 1, 2015 at 9:25 AM, Alexey Brodkin
alexey.brod...@synopsys.com wrote:
Hi Tom, Joe,
On Wed, 2015-07-01 at 22:22 +0800, Bin Meng
Hello Masahiro,
Am 04.07.2015 um 19:07 schrieb Masahiro Yamada:
Hey, quick review and apply please?
NAND commands are not working!
2015-07-01 21:35 GMT+09:00 Masahiro Yamada yamada.masah...@socionext.com:
Since commit 09c3280754f8 (mtd, nand: Move common functions from
cmd_nand.c to
Hi Simon,
2015-07-03 9:15 GMT+09:00 Simon Glass s...@chromium.org:
At present the driver model GPIO API does not support pull-up/pull-down on
input GPIOs. This is required in some cases.
Add this feature to the API with two new methods that drivers can optionally
implement.
Signed-off-by:
On 7/3/2015 5:12 PM, Tom Rini wrote:
On Fri, Jul 03, 2015 at 04:46:10PM +0530, Vignesh R wrote:
ti_qspi uses memory map mode for faster read. Enabling DMA will increase
read speed by 3x @48MHz on DRA74 EVM.
Signed-off-by: Vignesh R vigne...@ti.com
This ignores the feedback from
On 7/3/2015 7:27 PM, Andy Pont wrote:
Vignesh wrote...
[snip]
+#define BIT(x) (1 (x))
+
Is this not something that would be better in a global header file somewhere
rather than it starting a trend of a per-driver, per-arch, etc. definitions?
I
Hey, quick review and apply please?
NAND commands are not working!
2015-07-01 21:35 GMT+09:00 Masahiro Yamada yamada.masah...@socionext.com:
Since commit 09c3280754f8 (mtd, nand: Move common functions from
cmd_nand.c to common place), NAND commands would not work at all
on large devices.
Commit 90fbee3e4051 (cmd_fdt: Actually fix fdt command in sandbox)
changed the format(from hex address to unsigned long) in which fdtaddr
is saved . However do_fdt continues reads the fdtaddr assuming it to
be in hex format. This may lead to fdt being either loaded or attempted
to load at
On Sat, Jul 04, 2015 at 02:11:35PM +0530, Jagan Teki wrote:
Hi Tom,
Please pull this PR.
thanks!
Jagan.
The following changes since commit 891b487098ee2169a16b1bbb354aaef28aa90630:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-07-01 15:38:12
-0400)
are available
26 matches
Mail list logo