On Wed, Aug 15, 2018 at 6:13 PM, Marek Vasut wrote:
> On 08/15/2018 08:01 PM, Ley Foon Tan wrote:
>> Add code to reset all reset signals as in usb DT node. A reset property
>> is an optional feature, so only print out a warning and do not fail if a
>> reset property is not present.
>>
>> If a
On 08/15/2018 08:20 PM, Ley Foon Tan wrote:
> Bitmask for EMAC should be bit-0, EMAC1 bit-8 and EMAC2 bit-16.
>
> Signed-off-by: Ley Foon Tan
> ---
> arch/arm/mach-socfpga/include/mach/system_manager_s10.h | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git
Moving options to Kconfig some comments are useless now.
Signed-off-by: Michal Simek
---
include/configs/zynq-common.h | 8
1 file changed, 8 deletions(-)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 2506d2b80606..dded9cd3bf36 100644
---
On 08/14/2018 11:40 AM, Bin Meng wrote:
> Hi Marek,
>
> On Tue, Aug 14, 2018 at 4:55 PM, Marek Vasut wrote:
>> On 08/14/2018 03:46 AM, Bin Meng wrote:
>>> Hi Marek,
>>>
>>> On Mon, Aug 13, 2018 at 9:46 PM, Marek Vasut wrote:
On 08/13/2018 04:24 AM, Bin Meng wrote:
> Hi Marek,
>
On 08/15/2018 08:01 PM, Ley Foon Tan wrote:
> Move reset manager node to top, so reset driver can be load before
> other drivers. Peripheral drivers have dependency on reset framework
> to reset the hardware.
>
> Signed-off-by: Ley Foon Tan
This will break the next time you sync DTs with Linux,
On Wed, Aug 15, 2018 at 07:14:16AM +0100, Peter Robinson wrote:
> On Wed, Aug 15, 2018 at 7:13 AM, Jagan Teki
> wrote:
> > On Wed, Aug 15, 2018 at 11:40 AM, Peter Robinson
> > wrote:
> >> On Wed, Aug 15, 2018 at 6:55 AM, Jagan Teki
> >> wrote:
> >>> On Wed, Aug 15, 2018 at 2:35 AM, Peter
On 08/15/2018 12:32 PM, Ley Foon Tan wrote:
> On Wed, Aug 15, 2018 at 6:21 PM, Marek Vasut wrote:
>> On 08/15/2018 08:20 PM, Ley Foon Tan wrote:
>>> Bitmask for EMAC should be bit-0, EMAC1 bit-8 and EMAC2 bit-16.
>>>
>>> Signed-off-by: Ley Foon Tan
>>> ---
>>>
On 15.08.2018 13:26, Stefan Roese wrote:
> Hi Daniel,
>
> On 11.08.2018 18:59, Daniel Schwierzeck wrote:
>> On 10.08.2018 08:56, Stefan Roese wrote:
>>> This patch adds the SPI driver for the MediaTek MT7688 SoC (and
>>> derivates). Its been tested on the LinkIt Smart 7688 and the Gardena
>>>
Hi Daniel,
On 15.08.2018 15:01, Daniel Schwierzeck wrote:
On 15.08.2018 10:23, Stefan Roese wrote:
Hi Daniel,
I'm wondering about the CONFIG_MIPS_BOOT_CMDLINE_LEGACY Kconfig
option in MIPS. Why is this one called "legacy" and what should
be used instead to pass the U-Boot bootargs to the
On 08/14/2018 08:25 PM, Simon Goldschmidt wrote:
> On Tue, Aug 14, 2018 at 8:17 PM Marek Vasut wrote:
>>
>> On 08/14/2018 02:56 PM, Simon Goldschmidt wrote:
>>> On Tue, Aug 14, 2018 at 2:05 PM Marek Vasut wrote:
On 08/14/2018 12:22 PM, Simon Goldschmidt wrote:
> On Tue, Aug 14,
Hi Daniel,
On 11.08.2018 18:59, Daniel Schwierzeck wrote:
On 10.08.2018 08:56, Stefan Roese wrote:
This patch adds the SPI driver for the MediaTek MT7688 SoC (and
derivates). Its been tested on the LinkIt Smart 7688 and the Gardena
Smart Gateway with and SPI NOR on CS0 and on the Gardena Smart
On 08/14/2018 10:26 PM, Simon Goldschmidt wrote:
> On Tue, Aug 14, 2018 at 8:12 AM Simon Goldschmidt
> wrote:
>>
>>
>>
>> Marek Vasut schrieb am Mo., 13. Aug. 2018, 22:36:
>>>
>>> On 08/13/2018 09:34 PM, Simon Goldschmidt wrote:
To boot from fpga OnChip RAM, some changes are required in SPL
On 08/14/2018 10:19 PM, Simon Goldschmidt wrote:
> On Tue, Aug 14, 2018 at 10:37 AM Marek Vasut wrote:
>>
>> On 08/14/2018 08:09 AM, Simon Goldschmidt wrote:
>>>
>>>
>>> Marek Vasut mailto:ma...@denx.de>> schrieb am Mo., 13.
>>> Aug. 2018, 22:36:
>>>
>>> On 08/13/2018 09:34 PM, Simon
On 08/15/2018 08:05 PM, Ley Foon Tan wrote:
> Add code to reset all reset signals as in gpio DT node. A reset property
> is an optional feature, so only print out a warning and do not fail if a
> reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus
>
Hi Marek,
On Wed, Aug 15, 2018 at 5:22 PM, Marek Vasut wrote:
> On 08/14/2018 11:40 AM, Bin Meng wrote:
>> Hi Marek,
>>
>> On Tue, Aug 14, 2018 at 4:55 PM, Marek Vasut wrote:
>>> On 08/14/2018 03:46 AM, Bin Meng wrote:
Hi Marek,
On Mon, Aug 13, 2018 at 9:46 PM, Marek Vasut
Bitmask for EMAC should be bit-0, EMAC1 bit-8 and EMAC2 bit-16.
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/include/mach/system_manager_s10.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-socfpga/include/mach/system_manager_s10.h
This changes the driver to use dev_read_addr() which is safe both for
flat trees and live trees.
Signed-off-by: Ley Foon Tan
---
drivers/gpio/dwapb_gpio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/dwapb_gpio.c b/drivers/gpio/dwapb_gpio.c
index
Add code to reset all reset signals as in gpio DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon
Enabled get_function support for dwapb where the function will
return the state of GPIO port.
Signed-off-by: Chin Liang See
Signed-off-by: Ley Foon Tan
---
drivers/gpio/dwapb_gpio.c | 15 +++
1 file changed, 15 insertions(+)
diff --git a/drivers/gpio/dwapb_gpio.c
On Wed, Aug 15, 2018 at 6:31 PM, Marek Vasut wrote:
> On 08/15/2018 12:28 PM, Ley Foon Tan wrote:
>> On Wed, Aug 15, 2018 at 6:13 PM, Marek Vasut wrote:
>>> On 08/15/2018 08:01 PM, Ley Foon Tan wrote:
Move reset manager node to top, so reset driver can be load before
other drivers.
Hi Daniel,
I'm wondering about the CONFIG_MIPS_BOOT_CMDLINE_LEGACY Kconfig
option in MIPS. Why is this one called "legacy" and what should
be used instead to pass the U-Boot bootargs to the Linux kernel?
Thanks,
Stefan
___
U-Boot mailing list
On 08/14/2018 11:35 AM, Bin Meng wrote:
[...]
>> I think knowing where Linux does this
>> would be instructive to figure out where we need to have some additional
>> logic added OR we can make some cost/benefit analysis to see if it makes
>> more sense overall to add compatibles
Move reset manager node to top, so reset driver can be load before
other drivers. Peripheral drivers have dependency on reset framework
to reset the hardware.
Signed-off-by: Ley Foon Tan
---
arch/arm/dts/socfpga_stratix10.dtsi | 16
1 file changed, 8 insertions(+), 8
Add code to reset all reset signals as in usb DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon
On 08/15/2018 08:05 PM, Ley Foon Tan wrote:
> This changes the driver to use dev_read_addr() which is safe both for
> flat trees and live trees.
>
> Signed-off-by: Ley Foon Tan
Acked-by: Marek Vasut
> ---
> drivers/gpio/dwapb_gpio.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
On 08/15/2018 08:05 PM, Ley Foon Tan wrote:
> Enabled get_function support for dwapb where the function will
> return the state of GPIO port.
>
> Signed-off-by: Chin Liang See
> Signed-off-by: Ley Foon Tan
> ---
> drivers/gpio/dwapb_gpio.c | 15 +++
> 1 file changed, 15
On 08/15/2018 08:01 PM, Ley Foon Tan wrote:
> Add code to reset all reset signals as in usb DT node. A reset property
> is an optional feature, so only print out a warning and do not fail if a
> reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus
>
On Wed, Aug 15, 2018 at 6:13 PM, Marek Vasut wrote:
> On 08/15/2018 08:01 PM, Ley Foon Tan wrote:
>> Move reset manager node to top, so reset driver can be load before
>> other drivers. Peripheral drivers have dependency on reset framework
>> to reset the hardware.
>>
>> Signed-off-by: Ley Foon
Hi Maxine and team,
I want to run Fedora linux, from here:
https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp
/images/
on the Banana Pi BPI-M2 Berry. (works fine on a Banana Pi original)
I've waited six months for the patches to filter through to the Fedora team
On Wed, Aug 15, 2018 at 6:21 PM, Marek Vasut wrote:
> On 08/15/2018 08:20 PM, Ley Foon Tan wrote:
>> Bitmask for EMAC should be bit-0, EMAC1 bit-8 and EMAC2 bit-16.
>>
>> Signed-off-by: Ley Foon Tan
>> ---
>> arch/arm/mach-socfpga/include/mach/system_manager_s10.h | 6 +++---
>> 1 file changed,
On Wed, Aug 15, 2018 at 06:19:25PM +0800, Bin Meng wrote:
> Hi Marek,
>
> On Wed, Aug 15, 2018 at 5:22 PM, Marek Vasut wrote:
> > On 08/14/2018 11:40 AM, Bin Meng wrote:
> >> Hi Marek,
> >>
> >> On Tue, Aug 14, 2018 at 4:55 PM, Marek Vasut wrote:
> >>> On 08/14/2018 03:46 AM, Bin Meng wrote:
>
Hi Stefan,
On 15.08.2018 10:23, Stefan Roese wrote:
> Hi Daniel,
>
> I'm wondering about the CONFIG_MIPS_BOOT_CMDLINE_LEGACY Kconfig
> option in MIPS. Why is this one called "legacy" and what should
> be used instead to pass the U-Boot bootargs to the Linux kernel?
>
> Thanks,
> Stefan
This
On 10.08.2018 09:48, Stefan Roese wrote:
> The Gardena Smart-Gateway boards have a MT7688 SoC with 128 MiB of RAM
> and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND storage.
>
> This patch also includes 2 targets. One is the target that can be
> programmed into the SPI NOR flash and
First of all, your subject is wrong. You are not making any change to dm
or mmc.
On 08/13/2018 12:09 AM, Yinbo Zhu wrote:
> At present the MMC subsystem maintains its own list
> of MMC devices. This cannot work with driver model
> when CONFIG_BLK is enabled, use blk_dread to
> replace previous
On Wed, Aug 15, 2018 at 6:50 PM, Adam Ford wrote:
> On Mon, Aug 13, 2018 at 6:50 PM Adam Ford wrote:
>>
>> On Mon, Aug 13, 2018 at 5:09 PM Adam Ford wrote:
>> >
>> > On Mon, Aug 13, 2018 at 1:29 PM Simon Goldschmidt
>> > wrote:
>> > >
>> > > On Mon, Aug 13, 2018 at 3:46 PM Alex Kiernan
>> >
On Mon, Aug 13, 2018 at 6:50 PM Adam Ford wrote:
>
> On Mon, Aug 13, 2018 at 5:09 PM Adam Ford wrote:
> >
> > On Mon, Aug 13, 2018 at 1:29 PM Simon Goldschmidt
> > wrote:
> > >
> > > On Mon, Aug 13, 2018 at 3:46 PM Alex Kiernan
> > > wrote:
> > > >
> > > > On Mon, Aug 13, 2018 at 1:40 PM Adam
On 15.08.2018 16:36, Daniel Schwierzeck wrote:
On 10.08.2018 09:48, Stefan Roese wrote:
The Gardena Smart-Gateway boards have a MT7688 SoC with 128 MiB of RAM
and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND storage.
This patch also includes 2 targets. One is the target that can
This patch adds the SPI driver for the MediaTek MT7688 SoC (and
derivates). Its been tested on the LinkIt Smart 7688 and the Gardena
Smart Gateway with and SPI NOR on CS0 and on the Gardena Smart
Gateway additionally with an SPI NAND on CS1.
Note that the SPI controller only supports a max
On Wed, Aug 15, 2018 at 8:51 AM Michal Simek wrote:
>
> Hi Rob,
>
> On 15.8.2018 16:34, Tom Rini wrote:
> > On Wed, Aug 15, 2018 at 04:30:15PM +0200, Michal Simek wrote:
> >> On 15.8.2018 16:17, Tom Rini wrote:
> >>> On Mon, Aug 13, 2018 at 05:53:38PM +0200, Jens Wiklander wrote:
> >>>
>
On Wed, Aug 15, 2018 at 09:31:30AM -0600, Rob Herring wrote:
> On Wed, Aug 15, 2018 at 8:51 AM Michal Simek wrote:
> >
> > Hi Rob,
> >
> > On 15.8.2018 16:34, Tom Rini wrote:
> > > On Wed, Aug 15, 2018 at 04:30:15PM +0200, Michal Simek wrote:
> > >> On 15.8.2018 16:17, Tom Rini wrote:
> > >>> On
On 08/15/2018 06:12 PM, Tom Rini wrote:
> On Wed, Aug 15, 2018 at 06:04:50PM +0200, Marek Vasut wrote:
>
>> On 08/15/2018 04:30 PM, Tom Rini wrote:
>>> On Wed, Aug 08, 2018 at 01:20:29PM +0200, Marek Vasut wrote:
>>>
Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
On 15.08.2018 15:13, Stefan Roese wrote:
> Hi Daniel,
>
> On 15.08.2018 15:01, Daniel Schwierzeck wrote:
>> On 15.08.2018 10:23, Stefan Roese wrote:
>>> Hi Daniel,
>>>
>>> I'm wondering about the CONFIG_MIPS_BOOT_CMDLINE_LEGACY Kconfig
>>> option in MIPS. Why is this one called "legacy" and
On Mon, Aug 13, 2018 at 05:53:38PM +0200, Jens Wiklander wrote:
> Just as /chosen may contain devices /firmware may contain devices, scan
> for devices under /firmware too.
>
> Signed-off-by: Jens Wiklander
> ---
> drivers/core/root.c | 15 ++-
> 1 file changed, 10 insertions(+), 5
On 10.08.2018 09:48, Stefan Roese wrote:
> The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM
> and 32 MiB of flash (SPI NOR).
>
> The mt7628a.dtsi file is imported from Linux v4.17.
>
> This patch also includes 2 targets. One is the target that can be
> programmed into the
On Wed, Aug 08, 2018 at 01:20:29PM +0200, Marek Vasut wrote:
> Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
> the underlying block layer devices usually report support for 512B . In
> most cases, the 512B support is emulated (ie. SD cards, SSDs, USB sticks
> etc.) and
Hi Rob,
On 15.8.2018 16:34, Tom Rini wrote:
> On Wed, Aug 15, 2018 at 04:30:15PM +0200, Michal Simek wrote:
>> On 15.8.2018 16:17, Tom Rini wrote:
>>> On Mon, Aug 13, 2018 at 05:53:38PM +0200, Jens Wiklander wrote:
>>>
Just as /chosen may contain devices /firmware may contain devices, scan
On Wed, Aug 15, 2018 at 11:07 AM Jagan Teki wrote:
>
> On Wed, Aug 15, 2018 at 6:50 PM, Adam Ford wrote:
> > On Mon, Aug 13, 2018 at 6:50 PM Adam Ford wrote:
> >>
> >> On Mon, Aug 13, 2018 at 5:09 PM Adam Ford wrote:
> >> >
> >> > On Mon, Aug 13, 2018 at 1:29 PM Simon Goldschmidt
> >> >
On Wed, Aug 15, 2018 at 06:20:16PM +0200, Marek Vasut wrote:
> On 08/15/2018 06:12 PM, Tom Rini wrote:
> > On Wed, Aug 15, 2018 at 06:04:50PM +0200, Marek Vasut wrote:
> >
> >> On 08/15/2018 04:30 PM, Tom Rini wrote:
> >>> On Wed, Aug 08, 2018 at 01:20:29PM +0200, Marek Vasut wrote:
> >>>
>
On Wed, Aug 15, 2018 at 06:04:50PM +0200, Marek Vasut wrote:
> On 08/15/2018 04:30 PM, Tom Rini wrote:
> > On Wed, Aug 08, 2018 at 01:20:29PM +0200, Marek Vasut wrote:
> >
> >> Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
> >> the underlying block layer devices usually
On 14.08.2018 12:48, Cédric Le Goater wrote:
> commit 30a90f56c3a2 ("dm: core: add functions to get memory-mapped I/O
> addresses") introduced a devfdt_remap_addr_index() routine but it does
> not make use of the index parameter.
>
> Signed-off-by: Cédric Le Goater
> ---
>
On Wed, Aug 15, 2018 at 04:30:15PM +0200, Michal Simek wrote:
> On 15.8.2018 16:17, Tom Rini wrote:
> > On Mon, Aug 13, 2018 at 05:53:38PM +0200, Jens Wiklander wrote:
> >
> >> Just as /chosen may contain devices /firmware may contain devices, scan
> >> for devices under /firmware too.
> >>
> >>
On 15.8.2018 16:17, Tom Rini wrote:
> On Mon, Aug 13, 2018 at 05:53:38PM +0200, Jens Wiklander wrote:
>
>> Just as /chosen may contain devices /firmware may contain devices, scan
>> for devices under /firmware too.
>>
>> Signed-off-by: Jens Wiklander
>> ---
>> drivers/core/root.c | 15
On 08/08/2018 04:24 AM, Henry Beberman wrote:
-Original Message-
From: Alexander Graf
Sent: Tuesday, August 7, 2018 6:46 AM
To: Tom Rini
Cc: Stefano Babic ; Henry Beberman
; u-boot@lists.denx.de; Fabio Estevam
Subject: Re: [PATCH 01/11] imx: Add bootcmd to load and run UEFI from
mmc
This patch adds the SPI driver for the MediaTek MT7688 SoC (and
derivates). Its been tested on the LinkIt Smart 7688 and the Gardena
Smart Gateway with and SPI NOR on CS0 and on the Gardena Smart
Gateway additionally with an SPI NAND on CS1.
Note that the SPI controller only supports a max
On 15.08.2018 17:19, Stefan Roese wrote:
> This patch adds the SPI driver for the MediaTek MT7688 SoC (and
> derivates). Its been tested on the LinkIt Smart 7688 and the Gardena
> Smart Gateway with and SPI NOR on CS0 and on the Gardena Smart
> Gateway additionally with an SPI NAND on CS1.
>
>
On 08/15/2018 04:30 PM, Tom Rini wrote:
> On Wed, Aug 08, 2018 at 01:20:29PM +0200, Marek Vasut wrote:
>
>> Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
>> the underlying block layer devices usually report support for 512B . In
>> most cases, the 512B support is
On 13.08.2018 14:23, Philippe Reynes wrote:
> Add pinctrl support for broadcom bcm6838 SoC.
>
> Signed-off-by: Philippe Reynes
> ---
> Changelog:
> v2:
> - rename property pins-count to brcm,pins-count (feedback Daniel Schwierzeck)
> - rename property functions-count to brcm,functions-count
On 15.08.2018 16:05, Daniel Schwierzeck wrote:
On 15.08.2018 15:13, Stefan Roese wrote:
Hi Daniel,
On 15.08.2018 15:01, Daniel Schwierzeck wrote:
On 15.08.2018 10:23, Stefan Roese wrote:
Hi Daniel,
I'm wondering about the CONFIG_MIPS_BOOT_CMDLINE_LEGACY Kconfig
option in MIPS. Why is this
On 15.08.2018 16:30, Daniel Schwierzeck wrote:
On 10.08.2018 09:48, Stefan Roese wrote:
The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM
and 32 MiB of flash (SPI NOR).
The mt7628a.dtsi file is imported from Linux v4.17.
This patch also includes 2 targets. One is the
Marek Vasut schrieb am Mi., 15. Aug. 2018, 10:57:
> On 08/14/2018 08:25 PM, Simon Goldschmidt wrote:
> > On Tue, Aug 14, 2018 at 8:17 PM Marek Vasut wrote:
> >>
> >> On 08/14/2018 02:56 PM, Simon Goldschmidt wrote:
> >>> On Tue, Aug 14, 2018 at 2:05 PM Marek Vasut wrote:
>
> On
On 08/15/2018 12:28 PM, Ley Foon Tan wrote:
> On Wed, Aug 15, 2018 at 6:13 PM, Marek Vasut wrote:
>> On 08/15/2018 08:01 PM, Ley Foon Tan wrote:
>>> Move reset manager node to top, so reset driver can be load before
>>> other drivers. Peripheral drivers have dependency on reset framework
>>> to
On Wed, Aug 15, 2018 at 6:12 PM, Marek Vasut wrote:
> On 08/15/2018 08:05 PM, Ley Foon Tan wrote:
>> Enabled get_function support for dwapb where the function will
>> return the state of GPIO port.
>>
>> Signed-off-by: Chin Liang See
>> Signed-off-by: Ley Foon Tan
>> ---
>>
On 08/15/2018 12:19 PM, Bin Meng wrote:
> Hi Marek,
>
> On Wed, Aug 15, 2018 at 5:22 PM, Marek Vasut wrote:
>> On 08/14/2018 11:40 AM, Bin Meng wrote:
>>> Hi Marek,
>>>
>>> On Tue, Aug 14, 2018 at 4:55 PM, Marek Vasut wrote:
On 08/14/2018 03:46 AM, Bin Meng wrote:
> Hi Marek,
>
On 15.08.2018 14:02, Daniel Schwierzeck wrote:
On 15.08.2018 13:26, Stefan Roese wrote:
Hi Daniel,
On 11.08.2018 18:59, Daniel Schwierzeck wrote:
On 10.08.2018 08:56, Stefan Roese wrote:
This patch adds the SPI driver for the MediaTek MT7688 SoC (and
derivates). Its been tested on the
On 10.08.2018 09:48, Stefan Roese wrote:
> The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM
> and 32 MiB of flash (SPI NOR).
>
> The mt7628a.dtsi file is imported from Linux v4.17.
>
> This patch also includes 2 targets. One is the target that can be
> programmed into the
This reverts commit 2a1f4f1758b55589395f90f583aacb07ae6fcafe.
Maybe there's a better way to fix this, but reverting this got
odroid-xu4 booting agian:
U-Boot 2018.09-rc2+dfsg-1~20180814~1 (Aug 14 2018 - 18:33:28 +)
for ODROID-XU3/XU4/HC1
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based
On Wed, Aug 15, 2018 at 10:57 AM Marek Vasut wrote:
>
> On 08/14/2018 10:26 PM, Simon Goldschmidt wrote:
> > On Tue, Aug 14, 2018 at 8:12 AM Simon Goldschmidt
> > wrote:
> >>
> >>
> >>
> >> Marek Vasut schrieb am Mo., 13. Aug. 2018, 22:36:
> >>>
> >>> On 08/13/2018 09:34 PM, Simon Goldschmidt
On Wed, Aug 15, 2018 at 8:20 AM Adam Ford wrote:
>
> On Mon, Aug 13, 2018 at 6:50 PM Adam Ford wrote:
> >
> > On Mon, Aug 13, 2018 at 5:09 PM Adam Ford wrote:
> > >
> > > On Mon, Aug 13, 2018 at 1:29 PM Simon Goldschmidt
> > > wrote:
> > > >
> > > > On Mon, Aug 13, 2018 at 3:46 PM Alex Kiernan
The DA850-EVM supports booting from NAND when used with the
UI expander board. da850evm_nand will create an ais file
that can be burned to NAND and booted while storing the env in
NAND along with some partitions tables for storing kernel,
dtb and rootfs in NAND.
Signed-off-by: Adam Ford
---
V2:
In an earlier proposed patch, bcmstb.c implemented timer_read_counter,
but it was updated to implement get_ticks instead. This patch updates
the declaration in timer.h accordingly.
Signed-off-by: Thomas Fitzsimmons
---
arch/arm/mach-bcmstb/include/mach/timer.h | 2 +-
1 file changed, 1
On 10.08.2018 09:48, Stefan Roese wrote:
> This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of
> the code is copied from the MediaTek GitHub repository:
>
> https://github.com/MediaTek-Labs/linkit-smart-uboot.git
>
> Support for the LinkIt Smart 7688 module and the Gardena
Last user of this driver went away in May 2017, in
commit eb5ba3aefdf0f6 ("i2c: Drop use of CONFIG_I2C_HARD")
Signed-off-by: Tuomas Tynkkynen
---
drivers/i2c/Makefile | 1 -
drivers/i2c/mxs_i2c.c | 319 --
2 files changed, 320 deletions(-)
On 08/15/2018 09:23 PM, Simon Goldschmidt wrote:
> On Wed, Aug 15, 2018 at 10:57 AM Marek Vasut wrote:
>>
>> On 08/14/2018 10:26 PM, Simon Goldschmidt wrote:
>>> On Tue, Aug 14, 2018 at 8:12 AM Simon Goldschmidt
>>> wrote:
Marek Vasut schrieb am Mo., 13. Aug. 2018, 22:36:
On Thu, Aug 16, 2018 at 4:02 AM, Vagrant Cascadian wrote:
> This reverts commit 2a1f4f1758b55589395f90f583aacb07ae6fcafe.
>
Eh, this is a revert to a "revert" commit?
> Maybe there's a better way to fix this, but reverting this got
> odroid-xu4 booting agian:
>
Have we found out the real root
Enabled get_function support for dwapb where the function will
return the state of GPIO port.
Signed-off-by: Chin Liang See
Signed-off-by: Ley Foon Tan
---
v2: Change to use "if (gpio & BIT(offset))" bit masking.
---
drivers/gpio/dwapb_gpio.c | 14 ++
1 file changed, 14
Add code to reset all reset signals as in usb DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon
Add code to reset all reset signals as in gpio DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon
On Wed, Aug 15, 2018 at 3:22 AM, Alan Beard wrote:
> Hi Maxine and team,
>
> I want to run Fedora linux, from here:
> https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp
> /images/
>
> on the Banana Pi BPI-M2 Berry. (works fine on a Banana Pi original)
>
> I've waited
On Wed, Aug 15, 2018 at 6:55 AM, Jagan Teki wrote:
> On Wed, Aug 15, 2018 at 2:35 AM, Peter Robinson wrote:
>> On Tue, Aug 14, 2018 at 2:22 AM, Tom Rini wrote:
>>> Hey all,
>>>
>>> It is release day and despite Travis-CI being really bad about network
>>> connections over the weekend, it's back
On Wed, Aug 15, 2018 at 7:13 AM, Jagan Teki wrote:
> On Wed, Aug 15, 2018 at 11:40 AM, Peter Robinson wrote:
>> On Wed, Aug 15, 2018 at 6:55 AM, Jagan Teki
>> wrote:
>>> On Wed, Aug 15, 2018 at 2:35 AM, Peter Robinson
>>> wrote:
On Tue, Aug 14, 2018 at 2:22 AM, Tom Rini wrote:
>
On Wed, Aug 15, 2018 at 11:40 AM, Peter Robinson wrote:
> On Wed, Aug 15, 2018 at 6:55 AM, Jagan Teki
> wrote:
>> On Wed, Aug 15, 2018 at 2:35 AM, Peter Robinson wrote:
>>> On Tue, Aug 14, 2018 at 2:22 AM, Tom Rini wrote:
Hey all,
It is release day and despite Travis-CI being
Hi Daniel,
On 12.08.2018 00:52, Daniel Schwierzeck wrote:
On 09.08.2018 16:22, Stefan Roese wrote:
diff --git a/arch/mips/mach-mt7620/cpu.c b/arch/mips/mach-mt7620/cpu.c
new file mode 100644
index 00..0b22956499
--- /dev/null
+++ b/arch/mips/mach-mt7620/cpu.c
@@ -0,0 +1,66 @@
+//
82 matches
Mail list logo
